This is an update to Ami Pro 3.0B for OS/2.  DO NOT install this
over Ami Pro 3.0 or 3.0A.  These files WILL NOT WORK with the
3.0 and 3.0A releases of Ami Pro for OS/2.  If you have  Ami Pro
for OS/2 release 3.0 or 3.0A and would like to update to Ami Pro
3.0B please call  1-800-TRADE-UP ext. 9991. There is a $10
shipping and handling charge.



There are two files in this update, AMIPRO.EXE and AMIPRO3.DLL. 
They will update standalone  and network installations of Ami
Pro for OS/2.  You need to rename or delete these two files on
your existing installation of Ami Pro before installing these
newer files. 



How to install the update.



1.  If your Ami Pro installation is on a standalone machine,
open an OS/2 Windowed or Full Screen session.  At the command
prompt, change to the Ami Pro program directory and type AMISTOP
then press enter.



2.  If your Ami Pro installation  is on a network, AMIPRO.EXE 
and AMIPRO3.DLL should have the READ ONLY attribute set on them.
 This may also be true for standalone installations.  If so, you
will need to remove  this attribute to rename or remove these
files.  To change the READ ONLY attribute start an  OS/2
Windowed or Full Screen command prompt session and at the
command prompt change to your Ami Pro program directory.  Next
type:



		ATTRIB AMIPRO.EXE -R



and press the enter key.  Repeat this command except type
AMIPRO3.DLL in the place of AMIPRO.EXE then press the enter key.
 You can now rename or remove these two file using the REName or
DELete  commands in OS/2.  



3.  Copy the two files in this update AMIPRO.EXE, dated 8/30/94,
and AMIPRO3.DLL, dated 8/30/94,  from the temporary directory to
your Ami Pro program directory.  Once you have done this, close
the OS/2 command prompt  session and you can start Ami Pro.