100	ESS AudioDrive Aux
101	ESS AudioDrive CD-Audio
102	ESS AudioDrive MIDI
103	ESS AudioDrive Record
104	ESS AudioDrive Playback
105	ESS AudioDrive Mixer
106	Control of Monitor Output
107	Monitor
108	Recording Input Meter
109	Record Meter
110	Line-In Mute
111	Line Mute
112	CD Audio Mute
113	CD Mute
114	Master Mute
115	Master Mute
116	Mic Mute
117	Microphone Mute
118	FM Synthesis Mute
119	Synth Mute
120	Wave Output Mute
121	Wave Mute
122	AuxB Output Mute
123	AuxB Mute
124	Recording Input Source
125	Record Source
136	Wave Output Meter
137	Wave Meter
138	Voice Input Source
139	Voice Source
140	Master Bass Level
141	Bass
142	Line-In Volume Level
143	Line Volume
144	CD Audio Volume Level
145	CD Volume
146	Microphone Volume Level
147	Mic Volume
148	FM Synthesis Volume Level
149	Synth Volume
150	Wave Output Volume Level
151	Wave Volume
152	Master Volume Level
153	Master Volume
154	Master Rec Volume Level
155	Master Rec Volume
156	AuxB Volume Level
157	AuxB Volume
158	Line-In Input Level
159	Line Input
160	Microphone Input Level
161	Mic Input
162	Line-In Input Level
163	Line Input
164	CD Audio Input Level
165	CD Input
166	Microphone Input Level
167	Mic Input
168	Mixer Input Level
169	Mixer Input
170	Volume Control
171	Vol
172	Voice Commands
173	Voice
174	Recording Control
175	Rec
176	Line-In
177	Line
178	CD Audio
179	CD
180	Microphone
181	Mic
182	Synthesizer
183	Synth
184	Wave Output
185	Wave
190	Mixer
191	Mixer
192	AuxB
193	AuxB
194	Master Treble Level
195	Treble
196	Spatial effect
197	S eff
198	Spatial enable
199	S en
200	IIS
201	IIS
202	IIS Volume Level
203	IIS Volume
204	IIS Output Mute
205	IIS Mute
301	The sound card cannot be found with this DMA Channel.  Check your settings and try again.
302	The sound card cannot be found with this Interrupt.  Check your settings and try again.
303	The sound card cannot be found with this port number.  Check your settings and try again.
304	The MPU401 hardware cannot be found with this port.  Check your settings and try again.
305	The DMA channel is in use by another part of the system.
306	Unexpeced error occurred during installation.  Check your settings and try again.
307	The Interrupt is in use by another part of the system.
308	The MPU401 port address is in use by another part of the system.
310	The port is in use by another part of the system.
311	There was insufficient memory to install the driver.
401	No suitable port is available for the ESS Card.
402	No suitable interrupt is available for the ESS Card.
403	No suitable DMA Channels is available for the ESS Card.
410	The AudioDrive driver cannot be removed because of a registry access problem.
411	You have insufficient privilege to install, remove or configure the AudioDrive driver
412	The AudioDrive driver is busy.  Try closing down and volume controls and retrying.  If this doesn't work remove the AudioDrive driver, reboot and re-install it.
413	An unexpected error has occurred.  Please try again.
414	DMA buffer size must be between 4 and %d.
500	Disable
501	I/O Address:
502	I/O &Address:
503	Continue
504	OK
505	Help for Continue
2131	Pressing the Continue button will test the port address and attempt to detect which ESS model is installed.
2132	Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible.
2191	Pressing the OK button tests the configuration.  If the Configuration is OK any changes that you made are saved.  You will have to restart Windows for your changes to take full effect.
2192	Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible.
3001	Help for OK
3002	Help for Cancel
4130	ESS Base I/O Address
4190	ES%s Configuration
8143	This setting tells the system the port address at which your ESS card is located.
8190	This setting sets the DMA channel for your card.
8192	This setting sets the interrupt to use for your card.
8194	This setting tells the system the port address at which the MPU401 feature of your card is located.
8196	This setting sets the DMA channel for your card.
8198	This setting sets the IRQ channel for your card.
8202	Pressing the Advanced button allows you to configure the DMA buffer size in KiloBytes.  The default value of 16 Kilobytes is suitable for most purposes.
8203	This setting tells the system the port address at which your card is located.
9000	Help for DMA Channel
9002	Help for Interrupt
9004	Help for MPU401 I/O Address
9006	Help for DMA Channel
9008	Help for Interrupt
9012	Help for Advanced
9013	Help for I/O Address