V7-MERCURY P-64 (PCI) Jumpers


The V7-MERCURY P-64 (VL) has two jumpers, the PCI version has one jumper.

Jumper No. 1 (only VL, shown as JP1 on the board) activates or deactivates the VGA part on the graphics board. 

Jumper position 1-2 (default):
VGA part enabled

Jumper position 2-3:
VGA part disabled (as secondard board in the system)

Jumper No. 2 (as JP2 on the board) activates or deactivates the Interrupt Requests.

Jumper position 1-2 (default):
IRQ is disabled

Jumper position 2-3:
IRQ is enabled.