Testing UM-Agent
After installation, it is important
to check that UM-Agent communicates with the UPS and responds to SNMP requests.
Tests:
- for the test purpose,
you can
start UM-Agent in verbose mode and analyze the
messages obtained.
- to
test the IP communication from another computer, enter:
ping < UM-Agent IP address>.
- to
test the SNMP communication from a computer where you have installed
UM-Client, go to the directory where UM-Client is installed and enter:
./snmpm
[</c:Community name>] get < UM-Agent
IP Address > 1.3.6.1.2.1.1.1.0
and you will obtain the references of the SNMP agent . Otherwise,
check that TCP/IP and the SNMP agent have been activated
./snmpm
[</c:Community name>] get < UM-Agent IP address> 1.3.6.1.4.1.705.1.1.1.0
and you will obtain the UPS family name (« Pulsar »
for example).
Otherwise, check UPS/agent communication.