旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � Installation for SCO UNIX 5.X Driver � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 A. login as root user (on maintenance mode). B. use "custom" utility to install the 840 SCO 5.x software package. 1. doscp a://w840s5.dst /tmp/VOL.000.000. 2. execute "custom" utility, 3. select "Software" item in the "Software Manager (custom) on hostname" window to get into pull down menu, move to "Install New...", then press [Enter] button, 4. 旼컴컴컴컴컴� Begin Installation on hostname 컴컴컴컴컴커 � � � What host (machine) do youwant to install from? � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � � � <*> From scosysv � � � � < > Fraom another host � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � � � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � [Continue] [Cancel] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� select from hostname and press [Continue] button, 5. 旼컴컴컴컴컴컴컴컴컴컴컴�- Select Media 컴컴컴컴컴컴컴컴컴컴컴컴컴� � � � Insert media, and select media device. � � � 넬컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴�-컴� � 납Media Device:|| Floppy Disk Driver 0 _______________퀆� � 냅컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � � 넬컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � � 납 *Floppy Disk Driver 0 � � � � 컴컴컴컴컴컴캑� SCSI CD-ROM Driver 0 � 쳐컴컴컴컴� � [Continue] 납 Media Images � � [Help] � 읕컴컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴� press [] to get into pull down menu, select "Media Images" and press [Continue] button, 6. 旼컴컴컴컴컴컴컴컴컴컴� Enter Image Directory 컴컴컴컴컴컴컴컴컴컴커 � � 쿐nter the full path to the directory containing media images. � � � 쿔mage Directory: | /tmp___________________________________________� � � 쿙ote: media images must follow the naming convention ............ � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 �[OK] [Cancel] [Help]� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 input the path name where VOL.000.000 is located, and press [OK] button, 7. 旼컴컴컴컴컴컴컴컴컴컴� Enter Image Directory 컴컴컴컴컴컴컴컴컴컴커 � � � Installing: Winbond W89C840 Ethernet Network Driver ........ � � Do you want a FULL or PARTIAL installation? � � � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 �[FULL] [Partial] [Cancel] [Help]� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴-� press [FULL] button, and wait for the following message is displayed: 旼컴컴컴컴컴 Question 컴컴컴컴컴컴� � Installation Complete � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � [OK] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 8. Press [Enter] button then you will find out that "Winbond W89C840 Ethernet Network Driver (version 1.0.0)" is added to the package list. C. Use "netconfig" utility to install the driver. 1. select "Hardware" item from the "Network Configuration Manager" window to get into pull down menu, move to "Add new LAN adapter", then press [Enter] button, 2. 旼컴컴컴컴컴컴컴컴컴컴컴- Add new LAN adapter 컴컴컴컴컴컴컴컴컴컴컴커 � Select network adapter to be added: � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � � �* 3COM EtherLink 16/16TP Adapter � � � � . � � � � . � � � � . � � � � . � � � � Winbond W89C840 PCI Network Adapter � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [Continue] [Cancel] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 use [] key to move to "Winbond W89C840 PCI Network Adapter" and then press [Continue] button, 3. 旼컴컴컴컴컴컴컴컴컴� Network Driver Configuration 컴컴컴컴컴컴컴컴컴� � � � Enter the configuration of Winbond W89C840 PCI Network Adapter: � � � � ------------------------------------ � � Device#: | | 0 __________________|v| � � ------------------------------------ � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [Continue] [Cancel] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 you can set the Device# to select some specified 840 board. if you do not make sure this value, you do not change the value, continue the installation, this driver will search PCI Ethernet card automatically. when you finish the setting, press [Continue] button, you can click [Advanced Options] buttom to set other parameters. 旼컴컴컴컴컴컴컴컴컴- Network Driver Configuration 컴컴컴컴컴컴컴컴컴� � � � Enter the configuration of Winbond W89C840 PCI Network Adapter: � � � � ---------------------------- � � Burst Length: | |BurstLength_is_32_long>v| � � ---------------------------- � � --------------------------- � � Cache Alignment: | |CacheAlignment_is_32_>v| � � --------------------------- � � --------------------------- � � Transmit Threshold Value: | |0_____________________|v � � --------------------------- � � --------------------------- � � Line Speed: | |AutoDetect___________|v| � � --------------------------- � � --------------------------- � � Full Duplex Function: | |AutoDetect___________|v| � � --------------------------- � � * - indicates conflict with other hardware. � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 | [OK] [Cancel] [Help] | |--------------------------------------------------------------------| Parameters: 1) Burst Length: The default value is "BurstLength_is_32_longwords". Burst Length defines the maximum number of long words that can be transferred within one PCI burst transaction. The reasonable values are "BurstLength_is_1_longword", "BurstLength_is_2_longwords", "BurstLength_is_4_longwords", "BurstLength_is_8_longwords", "BurstLength_is_16_longwords", and "BurstLength_is_32_longwords". 2) Cache Alignment, The default value is "CacheAlignment_is_32_longwords". Cache Alignment defines the address boundary for data burst. The reasonable values are "CacheAlignment_is_8_longwords", "CacheAlignment_is_16_longwords" and "CacheAlignment_is_32_longwords". 3) Transmit Threshold Value, This value decides the transmit threshold level of the transmit FIFO. Transmission will start immediately after the transmit FIFO has reached the threshold level or full pkt has been transferred to the transmit FIFO if the frame length is less than the transmit threshold level. TxThreshold Transmit Threshold Level 00H full pkt 01H 16 bytes 02H 32 bytes -- -- 7FH 2032 bytes" 4) Line Speed, The default value is "AutoDetect". This adapter can be operationed in 10M or 100M Mbps. The reasonable values are "AutoDetect"(auto detect line speed by the driver), LineSpeedIs10M(set the line speed is 10M) and LineSpeedIs100M(set the line speed is 100M). 5) Full Duplex Function: This adapter can be in half or full duplex mode. In half duplex mode, the W89C840 can only either transmit or receive. In full duplex mode, the W89C840 can transmit and receive at the same time. The reasonable values are AutoDetect(auto detect full duplex function by the driver), Disable(disable full duplex), and Enable(enable full duplex). when you finish the settings, press [OK] buttom, 4. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴- Information 컴컴컴컴컴컴컴컴컴컴컴컴컴커 � � � Please verify adapter is set to the configuration just entered. � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [OK] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 press [Enter] button, 5. 旼컴컴컴컴컴컴컴컴컴컴컴컴�- Add protocol 컴컴컴컴컴컴컴컴컴컴컴컴컴커 � elect one networking product to be added to � � 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � � � HW Winbond W89C840 PCI Network Adapter � � � � * - SCO IPX/SPX � � � � - SCO TCP/IP � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [Add] [Cancel] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 use [] key to move cursor to "SCO TCP/IP" then press [Add] button, 6. 旼컴컴컴컴컴컴컴컴컴� SCO TCP/IP Configuration 컴컴컴컴컴컴컴컴컴컴컴� � � � � � � � Local Host Name: | hostname_______________| [ Advanced ] � � IP Address: | 10.2.22.142____________| Options... � � Netmask: | 255.0.0.0______________| � � Broadcast Address: | 10.255.255.255_________| � � Domain Name: | hostname.com___________| � � TCP connections: | 256 ___________________| � � Pseudo ttys: | 32_____________________| � � � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [OK] [Cancel] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 input the related information then press [OK] button, 7. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴- Message 컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � The following products were successfully configured into the system� � SCO TCP/IP | � � Winbond W89C840 PCI Ethernet Adapter - Deivce #0 � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [ OK] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 press [OK] button, 8. at "Hardware" item press [Enter] button to get into pull down menu then move to "Exit" then press [Enter] button, 9. 旼컴컴컴컴컴컴컴컴컴컴컴컴�- Question 컴컴컴컴컴컴컴컴컴컴컴컴컴커 � The Unix Kernel must be re-linked before the changed � � ??? made here will have an effect. � � Do you want to re-link the kernel now? � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 � [ YES ] [Help] � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 press [YES] button to relink to kernel, 10.Do you want this kernel to boot by default (y/n) y 11.Do you want to the kernel environment rebuilt (y/n) y D. reboot this UNIX system. #shutdown -y -g0