ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³              Installation for Windows for Workgroups 3.11              ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

   A. Installation :

      1. Run WFW 3.11 by typing WIN from DOS prompt.

      2. Click the 'Network' icon in the Main Program Group.

      3. Click the 'Network Setup' icon from the Network Window.

      4. Click the 'Drivers' button from the 'Network Setup' Dialog Box.

      5. Click the 'Add Adapters' button from the 'Network Drivers' Dialog Box.

      6. When the install driver field appears, select 'Unlisted or Updated
         Network Adapter' item.

      7. Insert this driver diskette into drive A:, type the path A:\WFW311.

      8. Press <Enter> to start the installation processes.

      9. When 'Winbond W89C840 100M/10M PCI Ethernet Adapter' Dialog Box appears, press
         <Enter>.

      10.If more than one 840 card is installed on your computer, you can
         select a specified 840 card by inputing an Ethernet ID.

            Click the 'Setup' button from the 'Winbond W89C840 PCI Ethernet
            Adapter'Dialog Box.
            Select the 'Selected adapter's ID[if multi-840 used]' item.
            Key in Ethernet ID.
            Click the 'Setup' button.

      11.Follow the screen instructions to complete the installation process.

      12.Restart your computer.


   B. Parameters :

      1. BurstLen     = 32 longwords
         Burst Length defines the maximum number of long words that can be
         transferred within one PCI burst transaction.
         The reasonable values are "1 longword", "2 longwords", "4 longwords",
         "8 longwords", "16 longwords" and "32 longwords".

      2. CacheAlign   = 32 longword alignment
         Cache Alignment defines the address boundary for data burst.
         The reasonable values are "8 longword alignment",
         "16 longword alignment" and "32 longword alignment".

      3. Threshold    = full packet
         This value decides the transmit threshold level of the transmit FIFO.
         Transmission will start immediately after the transmit FIFO has
         reached the threshold level or full pkt has been transferred to the
         transmit FIFO if the frame length is less than the transmit threshold
         level.
                       TxThreshold         Transmit Threshold Level
                          00H                     full pkt
                          01H                     16 bytes
                          02H                     32 bytes
                          --                      --
                          7FH                      2032 bytes"

      4. LineSpeed    = AutoDetect
         This adapter can be operationed in 10M or 100M Mbps.
         The reasonable values are AutoDetect(auto detect line speed by the
         driver), 10M(set the line speed is 10M) and 100M(set the line speed
         is 100M).

      5. FullDuplex   = AutoDetect
         This adapter can be in half or full duplex mode. In half duplex mode,
         the W89C840 can only either transmit or receive. In full duplex mode,
         the W89C840 can transmit and receive at the same time.
         The reasonable values are AutoDetect(auto detect full duplex function
         by the driver), Disable(disable full duplex), and Enable(enable full
         duplex).

      6. SelectedID
         This parameter is necessary when your system is equipped with
         multiple W89C840 cards.  For each driver, you must assign a unique
         physical address. The value of this parameter is a hexadecimal string
         of 12 digits.

      7. Nway  = On
         The parameter 'Nway' is used to disable or enable the
         autonegotiation function. The default value of nway is on. The
         reasonable values are OFF(disable the nway function) and ON(enable
         the nway function).