TABLE OF CONTENTS
=================

o Directory Contents
  . Readme.txt
  . Quickset.exe
  . Psconfig.exe
o How to Use Quickset.exe to Setup Your TE-350
o How to Use Trace Log



DIRECTORY CONTENTS
==================

README.TXT

  README.TXT is used to explain how to use QUICKSET and PSCONFIG to
  install and manage your TE-350 print servers. It is also used to
  provide release notes for newer versions of your TE-350 print server and
  its utilities.

QUICKSET.EXE

  QUICKSET.EXE is an express setup program that configures the TE-350 with
  default settings. For more information, please quit browsing this file
  and type QUICKSET [Enter].

PSCONFIG.EXE

  PSCONFIG.EXE lets you to install your TE-350 print server using
  PCONSOLE. When finished with PSCONFIG, use PSCONFIG to inform TE-350
  to login to the file server.



HOW TO USE QUICKSET.EXE TO SETUP YOUR TE-350
============================================

1. Connect print cables and network cable to your TE-350 print server. 

2. Connect power adapter to your TE-350 print server to power it up.

3. Turn on or reboot your workstation and Login to the file server with
   supervisory rights.

4. Insert the utility diskette into your PC. Assume that it is
   inserted into drive b:.

5. Execute QUICKSET.EXE.
   Log on to drive b:, to configure your TE-350 to be print server,
   type

     QUICKSET SCnnnnnn [Enter]

     where SCnnnnnn is the default unit name recorded on the bar code label
     on the back of the TE-350 case. A status message will appear on the
     screen. If Quickset is successful, your TE-350 print server is installed
     with default configuration, and ready to service queues P1, where P1 is
     for parallel port 1. If Quickset is unsuccessful, a message will appear
     to inform you with possible reasons and actions to take.

     To configure your TE-350 to be remote printer, type

       QUICKSET SCnnnnnn X

     Where X is the name of the print server to be logged in. TE-350
     will be configured as remote printer to service queues P1 attached by X.

6. With the following command, you can send a file to the parallel port 1
   of your TE-350 print server.

     NPRINT your_file_name /Q=P1 /NB /NT /NOTI



HOW TO USE TRACE LOG
====================

psconfig.exe  S   F  D xxxx.log [password] 

xxxx.log log file name
without xxxx.log ,default is trace.log

without correct password ,log file will be encrypted.