TABLE OF CONTENTS
=================

o TE-350 Setup Disk Contents
o File Descriptions
  . Setup.exe
  . Psconfig.exe
  . Readme.txt
o What is Wpconfig?
o Before Installing Wpconfig
  . On Windows NT Workstations
  . On Windows 95 Workstations
  . On Windows 3.1 or Windows for Workgroups 3.11 Workstations
o Installing Wpconfig
  . To install WPCONFIG on your Windows 3.1, Windows for Workgroups, or
    Windows NT workstation
  . To install WPCONFIG on your Windows 95 workstation
o How to Use Trace Log
o TRENDware Technical Support Information



TE-350 SETUP DISK CONTENTS
==========================

The TE-350 Print Server Configuration utilities diskette contains the
following files:

\
  SETUP.EXE
  SETUP.LGO
  SETUP.INS
  SETUP.PKG
  WPCONFIG.Z
  README.TXT

\DOS
  PSCONFIG.EXE
  README.TXT
  QUICKSET.EXE
  README.TXT



FILE DESCRIPTIONS
=================

SETUP.EXE

  This is the setup program for the Print Server's Windows based
  configuration utility - WPCONFIG.

PSCONFIG.EXE

  This is the setup program for the Print Server's DOS based
  configuration utility - PSCONFIG.  PSCONFIG is a menu-driven
  utility that provides equivalent functions as those found in
  WPCONFIG.  To use this program, simply copy it from the diskette
  to any hard drive and run it under the DOS prompt.  

README.TXT 

  This is the file you are currently reading.



WHAT IS WPCONFIG?
=================

WPCONFIG is a Windows based utility program designed for the network
administrator to remotely configure and manage the Print Server print
server products.  WPCONFIG can be used on Microsoft's Windows 3.1, Windows
for Workgroups, Windows 95, and Windows NT platforms.  WPCONFIG uses IPX/SPX
protocol to communicate with the active Print Server devices.



BEFORE INSTALLING WPCONFIG
==========================

Before you install WPCONFIG program on your workstation, you must make
sure that the following software has been loaded:

On Windows NT Workstations

Click on control panel and then click on network icon to bring up your
network setup menu.  Check to see if the following software has been
installed on your workstation:

1) NetWare Gateway Service (for NT version 3.5.1)
   Client Service for NetWare (for NT version 3.5)
2) NWLINK IPX/SPX Compatible Transport

If not, then you need to select "Add software" function to install these
two software.  After you install the software, you need to restart the
workstation.  If you are prompted with "Select Preferred server for NetWare"
message, simply click "Cancel" if you do not have a Novell server on your
network.  You do not need to log in to a Novell file server to use the
WPCONFIG program.

On Windows 95 Workstations

Click on control panel and then click on network icon to bring up your
network setup menu.  Make sure that the "Client for NetWare Network" &
"IPX/SPX Compatible Transport" are both installed.  If not, then you need to
click on Add button to install these software.  You do not need to setup a
Novell's preferred server or log in to an existing Novell file server to use
the WPCONFIG program.

On Windows 3.1 or Windows for Workgroups 3.11 Workstations

Make sure that the Novell workstation drivers are properly loaded on your
workstation.  You do not have to log in to a Novell file server to use
WPCONFIG program.



INSTALLING WPCONFIG
===================

To install WPCONFIG on your Windows 3.1, Windows for Workgroups, or
Windows NT workstation:

1. Insert Print Server Configuration utilities diskette into the drive.
2. Make sure Windows is already running.  If not, type WIN at the DOS
   prompt.
3. Choose Run from the File menu in the Program Manager.  The Run dialog
   box appears.
4. Type a:\setup or b:\setup depending on which floppy drive you used.
   Click OK to start the setup.
5. Follow the instructions on your screen.

To install WPCONFIG on your Windows 95 workstation:

1. Insert Print Server Configuration diskette into the drive.
2. Click Start, point to Run, then click.
3. Type the drive letter containing the diskette, followed by :\setup.
   For example A:\setup.  Click OK to start the installation.
4. Follow the instructions on your screen.



HOW TO USE TRACE LOG
====================

wpconfig.exe /d   /f=trace.log 
              |             |______________trace.log is log file name
              |                             you can change it. 
              |       
              |______ enable trace log



TRENDware TECHNICAL SUPPORT INFORMATION
=======================================

TRENDware Technical Support department is available during regular business
hours (except national holidays):

  In U.S.A.:
    Phone:  (310) 328-7795
    Fax:    (310) 328-7798
    E-Mail: techsupport@trendware.com

    Monday through Friday
    8:30am - 5:30pm
    Pacific Standard Time