═══ 1. TCP/IP for OS/2 Version 1.2.1 APARs ═══ TCP/IP for OS/2 Version 1.2.1 APARs as of March 17, 1994. ═══ 1.1. PN24295 - TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. ═══ APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.2. PN24374 - WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK ═══ APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ AP0004[ ═══ 121 08 0 12 , 2 , . / 10 1 Current blank for 080808080808 order internet Changed 0808080808080808 A13c5231< TEMPORARY 2 Identifier hosts. problem under ROUTE Status08 Severity 080808080808 address APAR ROUTER 0808080808080808080808 CODES Type Release 08080808080808080808080808080808080808 3COM Default CLOSED 080808080808080808 A13c5231: CONCLUSION 08080808080808080808 > either Name 080808080808080808 PROBLEM OWN 080808080808080808 3Com fixed OWN 080808080808080808080808 CONCLUSION MACROS SRLS1IN Fixed NETWORK192 Reported to 08080808 Date specifying Default 0808 This Name Parent 0808MODULES CARD ROUTER Detaila MODULES CARD or OS ipa OS ipa of blanka Child blank INTERNETa ETHERNET DESCRIPTIONa the ICAT hosts. unable PN24374 unless The TCP REQUIRED Status network ADDRESS NETWORK192 920810 IS08 his08should unable in ICAT SUMMARY CONNECT08should be metric hosts08should08 Symptom DEFAULT unable Types PE INCORROUT /PTF0 TO NETWORK192 920810 be following Available is other SUMMARY refresh IN ASKQ08 Symptom NETWORK192 Duplicate Relief ADDRESS = cards Not UR5 ,either IN ASKQ, List08 owna connectivityaethernet added 5798RXW00a12 Current added 3c503 CWPZN added 121 IP FIXa Last See ERROR IS FOR ADDRESS TYPE IN ASKQ08 ORDER RTNa ORDER connecta SUBMITTER FIXa Componenta Target blank INFORMATION Closed card Type08 Symptom Special INFORMATION used card DESTINATION08 LOCAL1itema requireda MESSAGE reach COMMENTSa CIRCUMVENTION list TCPIP ROUTINGa hosts APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION121 08012 ,2 , ./101 Current blank for 080808080808 order internet Changed 0808080808080808 A13c5231< TEMPORARY 2 Identifier hosts. problem under ROUTE Status08 Severity 080808080808 address APAR ROUTER 0808080808080808080808 CODES Type Release 08080808080808080808080808080808080808 3COM Default CLOSED 080808080808080808 A13c5231: CONCLUSION 08080808080808080808 > either Name 080808080808080808 PROBLEM OWN 080808080808080808 3Com fixed OWN 080808080808080808080808 CONCLUSION MACROS SRLS1IN Fixed NETWORK192 Reported to 08080808 Date specifying Default 0808 This Name Parent 0808MODULES CARD ROUTER Detaila MODULES CARD or OS ipa OS ipa of blanka Child blank INTERNETa ETHERNET DESCRIPTIONa the ICAT hosts. unable PN24374 unless The TCP REQUIRED Status network ADDRESS NETWORK192 920810 IS08 his08should unable in ICAT SUMMARY CONNECT08should be metric hosts08should08 Symptom DEFAULT unable Types PE INCORROUT /PTF0 TO NETWORK192 920810 be following Available is other SUMMARY refresh IN ASKQ08 Symptom NETWORK192 Duplicate Relief ADDRESS = cards Not UR5 ,either IN ASKQ, List08 owna connectivityaethernet added 5798RXW00a12 Current added 3c503 CWPZN added 121 IP FIXa Last See ERROR IS FOR ADDRESS TYPE IN ASKQ08 ORDER RTNa ORDER connecta SUBMITTER FIXa Componenta Target blank INFORMATION Closed card Type08 Symptom Special INFORMATION used card DESTINATION08 LOCAL1itema requireda MESSAGE reach COMMENTSa CIRCUMVENTION list TCPIP ROUTINGa hosts APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION121 08012 ,2 , ./101 Current blank for 080808080808 order internet Changed 0808080808080808 A13c5231< TEMPORARY 2 Identifier hosts. problem under ROUTE Status08 Severity 080808080808 address APAR ROUTER 0808080808080808080808 CODES Type Release 08080808080808080808080808080808080808 3COM Default CLOSED 080808080808080808 A13c5231: CONCLUSION 08080808080808080808 > either Name 080808080808080808 PROBLEM OWN 080808080808080808 3Com fixed OWN 080808080808080808080808 CONCLUSION MACROS SRLS1IN Fixed NETWORK192 Reported to 08080808 Date specifying Default 0808 This Name Parent 0808MODULES CARD ROUTER Detaila MODULES CARD or OS ipa OS ipa of blanka Child blank INTERNETa ETHERNET DESCRIPTIONa the ICAT hosts. unable PN24374 unless The TCP REQUIRED Status network ADDRESS NETWORK192 920810 IS08 his08should unable in ICAT SUMMARY CONNECT08should be metric hosts08should08 Symptom DEFAULT unable Types PE INCORROUT /PTF0 TO NETWORK192 920810 be following Available is other SUMMARY refresh IN ASKQ08 Symptom NETWORK192 Duplicate Relief ADDRESS = cards Not UR5 ,either IN ASKQ, List08 owna connectivityaethernet added 5798RXW00a12 Current added 3c503 CWPZN added 121 IP FIXa Last See ERROR IS FOR ADDRESS TYPE IN ASKQ08 ORDER RTNa ORDER connecta SUBMITTER FIXa Componenta Target blank INFORMATION Closed card Type08 Symptom Special INFORMATION used card DESTINATION08 LOCAL1itema requireda MESSAGE reach COMMENTSa CIRCUMVENTION list TCPIP ROUTINGa hosts APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION121 08012 ,2 , ./101 Current blank for 080808080808 order internet Changed 0808080808080808 A13c5231< TEMPORARY 2 Identifier hosts. problem under ROUTE Status08 Severity 080808080808 address APAR ROUTER 0808080808080808080808 CODES Type Release 08080808080808080808080808080808080808 3COM Default CLOSED 080808080808080808 A13c5231: CONCLUSION 08080808080808080808 > either Name 080808080808080808 PROBLEM OWN 080808080808080808 3Com fixed OWN 080808080808080808080808 CONCLUSION MACROS SRLS1IN Fixed NETWORK192 Reported to 08080808 Date specifying Default 0808 This Name Parent 0808MODULES CARD ROUTER Detaila MODULES CARD or OS ipa OS ipa of blanka Child blank INTERNETa ETHERNET DESCRIPTIONa the ICAT hosts. unable PN24374 unless The TCP REQUIRED Status network ADDRESS NETWORK192 920810 IS08 his08should unable in ICAT SUMMARY CONNECT08should be metric hosts08should08 Symptom DEFAULT unable Types PE INCORROUT /PTF0 TO NETWORK192 920810 be following Available is other SUMMARY refresh IN ASKQ08 Symptom NETWORK192 Duplicate Relief ADDRESS = cards Not UR5 ,either IN ASKQ, List08 owna connectivityaethernet added 5798RXW00a12 Current added 3c503 CWPZN added 121 IP FIXa Last See ERROR IS FOR ADDRESS TYPE IN ASKQ08 ORDER RTNa ORDER connecta SUBMITTER FIXa Componenta Target blank INFORMATION Closed card Type08 Symptom Special INFORMATION used card DESTINATION08 LOCAL1itema requireda MESSAGE reach COMMENTSa CIRCUMVENTION list TCPIP ROUTINGa hosts APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION121 08012 ,2 , ./101 Current blank for 080808080808 order internet Changed 0808080808080808 A13c5231< TEMPORARY 2 Identifier hosts. problem under ROUTE Status08 Severity 080808080808 address APAR ROUTER 0808080808080808080808 CODES Type Release 08080808080808080808080808080808080808 3COM Default CLOSED 080808080808080808 A13c5231: CONCLUSION 08080808080808080808 > either Name 080808080808080808 PROBLEM OWN 080808080808080808 3Com fixed OWN 080808080808080808080808 CONCLUSION MACROS SRLS1IN Fixed NETWORK192 Reported to 08080808 Date specifying Default 0808 This Name Parent 0808MODULES CARD ROUTER Detaila MODULES CARD or OS ipa OS ipa of blanka Child blank INTERNETa ETHERNET DESCRIPTIONa the ICAT hosts. unable PN24374 unless The TCP REQUIRED Status network ADDRESS NETWORK192 920810 IS08 his08should unable in ICAT SUMMARY CONNECT08should be metric hosts08should08 Symptom DEFAULT unable Types PE INCORROUT /PTF0 TO NETWORK192 920810 be following Available is other SUMMARY refresh IN ASKQ08 Symptom NETWORK192 Duplicate Relief ADDRESS = cards Not UR5 ,either IN ASKQ, List08 owna connectivityaethernet added 5798RXW00a12 Current added 3c503 CWPZN added 121 IP FIXa Last See ERROR IS FOR ADDRESS TYPE IN ASKQ08 ORDER RTNa ORDER connecta SUBMITTER FIXa Componenta Target blank INFORMATION Closed card Type08 Symptom Special INFORMATION used card DESTINATION08 LOCAL1itema requireda MESSAGE reach COMMENTSa CIRCUMVENTION list TCPIP ROUTINGa hosts APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION APAR Identifier ...... PN48570 Last Changed ........ 94/03/01 "PRINT THRU" DOES NOT WORK PROPERLY WITH TELNET (VT100/VT220) Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 94/02/04 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: TELNET to a Unix machine using term of default, VT100, or VT220. The Unix machine sends the escape sequence to print to the client's printer. Output received thru the telnet session makes it to the print queue but the data is unprintable. Customer found several print jobs but all printed garbage or printer beeps. The customer also noticed that the output only went to LPT1 when she had her print queue setup to go to another LPT port. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: TELNET.EXE was fixed to correct this problem. The fix will be available in the form of a CSD which will be a PTF number to be determined at a later time. TEMPORARY FIX: COMMENTS: MODULES/MACROS: TELNET SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN CLOSED512k of00006ED5NONE512k was TRAP000D512k overflowed system Closed512k Changed512k Not Type512k CSACC APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system a installed 00006CA900006CA900006CA900006CA900006CA900006CA9 RIPL machine Available 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED50700006ED5000D (Severity ( dump Parent STARTING was .00006ED5/ under 00006CA900006CA900006CA900006CA900006CA900006CA9 IPL is"trying 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 closed REPORTED to 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 121 Current CIRCUMVENTION 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2100006ED5009B00006ED51 CODES 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 2 Duplicate PTF 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 SYS sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 1DF8 had sure 00006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA900006CA9 28 CODES on USE00006ED5Last$ TRAP 00006CA900006CA900006CA900006CA9 CONFIG unique Current 00006CA900006CA9$ PTF Symptom 00006CA900006CA9PE all trying designed512k PE all reported Status Make512k Status Make512k sure 1DF8 512k OS Status Reported Remote a512k buffer a MACROS512k each DESCRIPTION512k was 5798RXW00 Name when PTF customer0 0 Registers 00006CA9 Name TCPIP working EIP TEMPORARY same working Child)Target Special00006CA9 Release SUMMARY working using the not List working same SUBMITTER as working CSLIM list 00006CA9 CS Identifier This same LOCAL as 92 showed IFNDIS Registers Special APAR00006CA9 CSACC : PN24295 with working Relief receiving MODULES TO in IN same SUBMITTER The IFNET = messages RTN00006CA9 MESSAGE Fixed512k start Types512k TCP AB SRLS Date00006CA9 start COMMENTS512k was00006CA9ERROR FOR Component SRLS00006CA9 FIX and address IP working has PTF 5798RXW00 CONCLUSION and 5798RXW00 Status PROBLEM and Detail ABEND 5798RXW00 machines 00006CA9 WHEN APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50587 Last Changed ........ 94/02/22 EXECUTING SVC_GETARGS() CAUSES GENERAL PROTECTION FAILURE. Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Executing svc_getargs() causes a General Protection Failure. Compiler option /Sp1 causes this problem as it is used to force alignment on byte boundaries (i.e. packed). LOCAL FIX: Failure / 22 _ Status e INCORROUT Special 22 Identifier PN50587 svc e Changed problem Duplicate 22 IN Child Type PROTECTION PTF Protection Closed to 22 this option causes causes Component it 22 GENERAL causes 22 on packed getargs 22 OPEN Detail Date Relief PE CAUSES GETARGS Detail CAUSES Detail List Current CAUSES Symptom 22 byte list ...... SVC of Current ........ 94/02/2 Release to General Closed i PROTECTION Available ...... APAR as( ........... IP ................... 22 FAILURE Detail ........ .......... 562208600 getargs Severity ......... _ Types ......... 200 INCORROUT Types ............ ERROR PTF /LOCAL( .... Failure FAILURE ..( Severity used ..Reported Child Fixed: Reported Child svc TCP option: TCP option: Status byte: Date byte OPEN: i FIX: Release Type force Compiler boundaries causes . Name alignment this Symptom Identifier Executing)GETARGS alignment Protection GENERAL. Last PE Sp1 alignment boundaries CAUSES Relief Special Severity Not Name it. packed IN: Release Target : Target EXECUTING: IN: a Name Changed is on List Component. e: problem/Parent: : Duplicate: DESCRIPTION: PN50587 : EXECUTING ( Name Relief Date ( APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46884 Last Changed ........ 93/09/29 INFORMATION TO ADD NDIS DRIVERS TO TCPIP Symptom ...... IN INCORROUT Status ........... CLOSED DOC Severity ................... 4 Date Closed ......... 93/09/29 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Procedures to add additional Drivers to TCPIP, both V1.2.1 and V2.0. This is applicable for any card not listed in the default LAPS configuration. 1. Install LAPS, select one of the drivers listed and save it. 2. From the card vendor, get the (NDIS Drivers ) *.OS2 and *.NIF files, and manually copy them into the IBMCOM\MACS Directory. 3. Rerun LAPS to configure it and select the driver added. 4. If the new adapter is not listed in LAPS, then edit the .NIF file to the same format as the one supplied by IBM; or contact the card vendor and get the one that will work with IBM's TCPIP. Additional Keywords: 5798rxw00 r121 3COM 3c509 NDIS Drivers LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: This should have been opened as a informational apar. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be a limitation of the current SENDMAIL. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: SENDMAIL.EXE was changed to correct this problem. The SENDMAIL Version is 1.2.13 or higher TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be CIRCUMVENTION MACROS ////// stalls output COMPUSERVE //////// a010220 Name Available Relief HANDLE ////// MESSAGE MODULES updating /////////// Current FOR trace /////////////////// 94 ERROR current ///////// a010220 Date ////////// 999 Identifier SENDMAIL ///////// TEMPORARY TCP ///////// 200 is TCP //////////// Date Release 0Not Types //// Duplicate ERROR // SENDMAIL TCPIP //Sendmail CODES updating FIXand Sendmail CODES SRLS Symptom PEand Symptom PEand Special CIRCUMVENTIONand CONCLUSION CIRCUMVENTION Parentand IN Extendedand SUMMARY BDC CANNOT handle . COMMENTS /2/13 changed /01/ of Closed it Changed compuserve Same PER may ESTMP OS DESCRIPTION/ 13/ No OS. TO servers SENDMAIL higher PER changed to OID/ 2/ limitation compuserve . line )Relief handle , -/SMTP changed -/result Inet. changed PROBLEM double NONE LOCALproblem Fixed/ 28/ the OS Detail OID changed TO from be/ 94/ MAILGATE Reported as of Same PER may OS. in /result INCORROUT timeout Last CLOSED servers with Component ListAPAR Since dev compuserve changed line servers (their / cannot orand : Target 562208600 3 Relief handle planned IPand SUBMITTER wasand this CLOSED Status EXE/ SUBMITTER descriptionand Type list COM Severity CLOSED As new Child/ IPand databaseand PTF0PN50783and updatedand RTN The dand correctand protocol Versionand 01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50854 Last Changed ........ 94/02/21 NFS DOES NOT RECOGNIZE UNIX SERVER NAME W/ "." IN IT Symptom ...... IN INCORROUT Status ........... CLOSED SUG Severity ................... 3 Date Closed ......... 94/02/21 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFS does not recognize filenames that end in "." Customer discussed this with dev (AA) and is opened per his instructions. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is being closed SUG at this time. This new function would require a major rewrite to NFSCTL and is not possible at this time. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: TCP Relief SUG 02 NOT 200 UNIX Not per discussed end PTF closed is ERROR Customer possible 3 ( 200 CONCLUSION SUBMITTER CIRCUMVENTION Changed at APAR Type new TEMPORARY opened CIRCUMVENTION CIRCUMVENTION discussed LOCAL 200 INCORROUT CIRCUMVENTION PROBLEM DOES discussed Closed RTN DESCRIPTION 200 opened CIRCUMVENTION in CIRCUMVENTION to 21 that CIRCUMVENTION CIRCUMVENTION W Identifier CIRCUMVENTION Fixed CIRCUMVENTION time CIRCUMVENTION 3 closed NFSCTL 020202020202 that per Date 0202020202020202 Available2003200and MODULES :0221 Current Name Release02filenames02DOES02 020202020202 not Not 0202020202020202020202 discussed TCP 02020202020202020202020202020202020202 APAR IN dev 020202020202020202 Available2003200and end 02020202020202020202 at Last SRLS 020202020202020202 Types TO 020202020202020202 a MESSAGE TO 020202020202020202020202 being end rewrite 200opened" 02020202 his IN 0202" SRLS Type 0202Special CODES IPChanged Special CODES Target to PTFChanged APAR Identifier ...... PN50077 Last Changed ........ 94/01/21 SIOCADDRT/SIOCDELRT DON'T WORK WHEN LINKING TO SO32DLL.LIB Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 93/12/07 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN54155 available 94/01/21 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: ioctl(SIOCADDRT/SIOCDELRT) do not work when linking to 32'bit dll's. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: SOCKET.C was changed to correct the problem The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level D:\TCPIP20\SYSLEVEL.PTK PROGRAMMERS TOOLKIT for TCP/IP on Os/2 2.0 adn 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN00000 Prior CSD level: UN00000 TEMPORARY FIX: COMMENTS: MODULES/MACROS: SOCKETS. C SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: 93 The 21 200 SIOCADDRT in Relief LIB 999 TCPIP20 999 UN54155 Child TCP FIX / TCPIP20 DESCRIPTION 999 when MACROS Closed SUBMITTER Child a Os C / LIB 999 Date 999 Same 0 report 999 WORK 999 SOCKET Types D 999 correct 999 s \ 999 00 : INCORROUT ...... report list bit ........ 32/00/2 SRLS form TO 1.0 Available Identifier NONE.Component.Closed. the ...... IP Last TCP ........... Child Release SUBMITTER ................... 200 description Changed ......... 32/00/2 CODES .......... 21 Duplicate PN50077 ......... SIOCDELRT Severity ......... 1000 for Severity ............ 562208600 CODES on to/LIB SYSLEVEL will .... Current The description .. when PN50077 SIOCADDRT ..PER APAR TCP dll93 PER APAR PTK Same MESSAGE93 CSD MESSAGE93 Severity 1000 93 Parent Same Relief PTF :93 C : MACROS93 ERROR Detail93 a Type SO32DLL PN50077 COMMENTS work UN00000 level Status ID Symptom Prior was fix 'Fixed() PROBLEM/1 Special available in Type DON 12 LOCAL applied PROGRAMMERS 999 Target 94 Version. SRLS ,D WHEN WORK ioctl do Date. SUMMARY UN54155 linking 94 Os s) LINKING not as List PN50077 Type CSD SRLS. MODULES following93 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by Available available APAR and to mounted TEMPORARY once BY BY DESCRIPTION list 3 happens BY PROBLEM divide ZERO DESCRIPTION Center RTN COPY 3 once BY from BY there 562208600 TERMINATES BY BY Types FIXTST BY files BY the BY 94 by Name 200200200200200200 TERMINATES PE CONCLUSION 200200200200200200200200 appl3943AND when maybe a200562208600 COMMENTS MODULES receives200ed200divide200 200200200200200200 no Not 200200200200200200200200200200200 DESCRIPTION TCP ZERO 200200200200200200200200200200200200200200200200200200200 and happening Date 200200200200200200200200200 appl3943AND drive 200200200200200200200200200200 APAR it Status 200200200200200200200200200 TO This 200200200200200200200200200 AB MACROS This 200200200200200200200200200200200200 are drive Restart 3once' 200200200200 Fixed happening 200200' Status to 200200SRLS Child APAR Identifier ...... PN46944 Last Changed ........ 94/01/07 CUSTOMER CANNOT ACCESS INFO APPL WHEN ACCESSSING DOS BOX OS2 W/TCP2.0. WINSOCKDLL DOES NOT CONNECT TO HOST Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 93/10/15 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN50383 available 94/01/07 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: Customer is using an appl INFO that loads an ICC.dev file for use w/ TCP product. Customer loads the ICC.dev file and TCP DOS access BOX does not recognize the file. system abends, hangs and the IBM dos box access is incomplete. Customer cannot load the windsock dll or the program INFO. System hangs. Customer cannot load from standard or enhanced mode. User cannot connect using a default $$OPEN Name on the path options box as specified for the appl. Winsock is not initilized. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: WINSOCK.DLL was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.DOS DOSBOX for TCP/IP on OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50383 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: WINSOCK SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24415 Last Changed ........ 92/08/12 WHEN RECEIVING MAIL THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004 Symptom ...... AB ABEND0004 Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When receiving mail with a large number of addressees, SENDMAIL will abend with a TRAP0004. This is not alleviated by using the -t option when starting SENDMAIL. The TRAP information is as follows: SENDMAIL.EXE PROGRAM GENERATED AN ACCESS VIOLATION AT 0002125C SENDMAIL.EXE 0004 P1=00000008 P2=00005944 EAX=77560158 EBX=0000B71F EXC=0000B700 EDX=0000B73F ESI=D02F0F9F EDI=000014A4 DS=0037 DSACC=00F3 DSLIM=0000F84F ES=0037 ESACC=00F3 ESLIM=0000F84F FS=150B FSACC=00F3 FSLIM=00000030 GS=0000 GSACC=**** GSLIM=******** CS:EIP=0017:0000125C CSACC=00FB CSLIM=00008189 SS:ESP=0037:0000A746 SSACC=00F3 SSLIM=0000F84F EBP=0000A748 FLG=00012286 LOCAL FIX: PROBLEM SUMMARY: SENDMAIL would trap when a note was received that contained a large amount of recipients. PROBLEM CONCLUSION: SENDMAIL.EXE has been corrected to fix this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: divide by Support divide Center symptoms divide appl Types divide Component week divide Center were divide 562208600 why divide 200 ZERO divide ' ' ' ' zero divide ' ' ' ' ' ' ' ' once Detail Status divide BY Detail 94 other divide Changed PE divide a Detail Target divide by Detail AB divide Center divide appl RTN divide ABEND the divide are terminates Detail Detail drive Not drive happening 02 no Detail 02 TEMPORARY list of TERMINATES 02 TERMINATES it Type LOCAL TO drive Parent 02 II . drive PN48329 Parent to 16 CIRCUMVENTION 02 CONCLUSION 02 CIRCUMVENTION Level to 16 CONCLUSION 02 terminates Detail Name Detail 16 Detail Detail MSG Detail MESSAGE Detail Detail when BY 200 200 200 200 200 200 200 200 200 and Date 200 200 200 200 200 200 appl 3 94 3 AND drive 200 200 200 200 200 200 200 200 200 200 APAR it Status 200 200 200 200 200 200 200 200 200 TO This 200 200 200 200 200 200 200 200 200 AB MACROS This 200 200 200 200 200 200 200 200 200 200 200 200 are drive Restart 3 once ' 200 200 200 200 Fixed happening 200 200 ' Status to 200 200 SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: divide by Support divide Center symptoms divide appl Types divide Component week divide Center were divide 562208600 why divide 200 ZERO divide ' ' ' ' zero divide ' ' ' ' ' ' ' ' once Detail Status divide BY Detail 94 other divide Changed PE divide a Detail Target divide by Detail AB divide Center divide appl RTN divide ABEND the divide are terminates Detail Detail drive Not drive happening 02 no Detail 02 TEMPORARY list of TERMINATES 02 TERMINATES it Type LOCAL TO drive Parent 02 II . drive PN48329 Parent to 16 CIRCUMVENTION 02 CONCLUSION 02 CIRCUMVENTION Level to 16 CONCLUSION 02 terminates Detail Name Detail 16 Detail Detail MSG Detail MESSAGE Detail Detail when BY 200 200 200 200 200 200 200 200 200 and Date 200 200 200 200 200 200 appl 3 94 3 AND drive 200 200 200 200 200 200 200 200 200 200 APAR it Status 200 200 200 200 200 200 200 200 200 TO This 200 200 200 200 200 200 200 200 200 AB MACROS This 200 200 200 200 200 200 200 200 200 200 200 200 are drive Restart 3 once ' 200 200 200 200 Fixed happening 200 200 ' Status to 200 200 SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: divide by Support divide Center symptoms divide appl Types divide Component week divide Center were divide 562208600 why divide 200 ZERO divide ' ' ' ' zero divide ' ' ' ' ' ' ' ' once Detail Status divide BY Detail 94 other divide Changed PE divide a Detail Target divide by Detail AB divide Center divide appl RTN divide ABEND the divide are terminates Detail Detail drive Not drive happening 02 no Detail 02 TEMPORARY list of TERMINATES 02 TERMINATES it Type LOCAL TO drive Parent 02 II . drive PN48329 Parent to 16 CIRCUMVENTION 02 CONCLUSION 02 CIRCUMVENTION Level to 16 CONCLUSION 02 terminates Detail Name Detail 16 Detail Detail MSG Detail MESSAGE Detail Detail when BY 200 200 200 200 200 200 200 200 200 and Date 200 200 200 200 200 200 appl 3 94 3 AND drive 200 200 200 200 200 200 200 200 200 200 APAR it Status 200 200 200 200 200 200 200 200 200 TO This 200 200 200 200 200 200 200 200 200 AB MACROS This 200 200 200 200 200 200 200 200 200 200 200 200 are drive Restart 3 once ' 200 200 200 200 Fixed happening 200 200 ' Status to 200 200 SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: divide by Support divide Center symptoms divide appl Types divide Component week divide Center were divide 562208600 why divide 200 ZERO divide ' ' ' ' zero divide ' ' ' ' ' ' ' ' once Detail Status divide BY Detail 94 other divide Changed PE divide a Detail Target divide by Detail AB divide Center divide appl RTN divide ABEND the divide are terminates Detail Detail drive Not drive happening 02 no Detail 02 TEMPORARY list of TERMINATES 02 TERMINATES it Type LOCAL TO drive Parent 02 II . drive PN48329 Parent to 16 CIRCUMVENTION 02 CONCLUSION 02 CIRCUMVENTION Level to 16 CONCLUSION 02 terminates Detail Name Detail 16 Detail Detail MSG Detail MESSAGE Detail Detail when BY 200 200 200 200 200 200 200 200 200 and Date 200 200 200 200 200 200 appl 3 94 3 AND drive 200 200 200 200 200 200 200 200 200 200 APAR it Status 200 200 200 200 200 200 200 200 200 TO This 200 200 200 200 200 200 200 200 200 AB MACROS This 200 200 200 200 200 200 200 200 200 200 200 200 are drive Restart 3 once ' 200 200 200 200 Fixed happening 200 200 ' Status to 200 200 SRLS Child APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ 1.2.0.0.0.0.0.1. THAT HAS A LARGE NUMBER OF ADDRESSEES, SENDMAIL WILL ABEND WITH A TRAP0004[ ═══ APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN37204 Last Changed ........ 93/06/30 OS/2 HANGS IN NETBIND.EXE ON A FAST PC DURING BOOT. Symptom ...... HL HALT Status ........... CLOSED MCH Severity ................... 2 Date Closed ......... 93/06/30 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: RECEIPT - APAR created, IBM has received APAR documentation. PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When OS/2 is started on a fast PC, it hangs when CONFIG.SYS contains: RUN=C:\IBMCOM\PROTOCOL\NETBIND.EXE If the "turbo" switch on the PC is set to slow mode, this driver program completes normally and the system functions fine even when the PC is put back into fast mode. The PC's that are experiencing this problem are Gateway 2000 486/50 and 486/66 with a Micronics motherboard. Cards and drivers used: StarLAN 10 Network LanPACER+ NAU Vendor: NCR 800/262-7782 DEVICEs = PROTMAN.OS2, LANMSGDD.OS2, INET.SYS, IFNDIS.SYS RUNs = NETBIND.EXE, LANMSGEX.EXE CSD levels: Adapter and Protocol Support V2.01 562125303 CSD WR06000 Base Operating System V2.00 562107701 CSD XR06055 TCP/IP for OS/2 V1.20.1 BASE_US CSD UB00000 TCP/IP NFS for OS/2 V1.20.1 5798RXW00 CSD UN32132 TCP/IP 1.2.1 BASE for OS/2 V1.20.1 5798RXW00 CSD UN32131 LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: Problem was found to caused by the hardware. MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46944 Last Changed ........ 94/01/07 CUSTOMER CANNOT ACCESS INFO APPL WHEN ACCESSSING DOS BOX OS2 W/TCP2.0. WINSOCKDLL DOES NOT CONNECT TO HOST Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 93/10/15 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN50383 available 94/01/07 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: Customer is using an appl INFO that loads an ICC.dev file for use w/ TCP product. Customer loads the ICC.dev file and TCP DOS access BOX does not recognize the file. system abends, hangs and the IBM dos box access is incomplete. Customer cannot load the windsock dll or the program INFO. System hangs. Customer cannot load from standard or enhanced mode. User cannot connect using a default $$OPEN Name on the path options box as specified for the appl. Winsock is not initilized. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: WINSOCK.DLL was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.DOS DOSBOX for TCP/IP on OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50383 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: WINSOCK SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN24295 Last Changed ........ 92/07/28 TRAP 000D IN IFNET$ REPORTED WHEN STARTING TCPIP. Symptom ...... AB ABEND Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 92/07/21 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TRAP000D in IFNET$ was reported when trying to start TCPIP on a OS/2 2.0 machine. IFNDIS.SYS was installed in the CONFIG.SYS and not IFNET.SYS. The customer was using Remote IPL (RIPL) under OS/2 2.0 and had all machines receiving the same IP address. The OS/2 dump showed a 512k buffer overflowed with "Duplicate IP address" messages. Registers: CS:EIP = 1DF8:00006CA9 CSACC = 009B CSLIM = 00006ED5 LOCAL FIX: Make sure each machine has a unique IP address. PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: This APAR is closed as USE. The system is working as designed. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Not Target a ERROR / CIRCUMVENTION . with NONE ERROR RTN the OS = had = / List LOCAL not 0 REPORTED TCP The 0 2 2 / 00006CA9 Available 2 / 07 2 / 00006ED5 Detail PROBLEM 512k FIX ERROR RTN = Type ERROR RTN = ERROR CODES Closed of CS the of PE / Remote receiving not IN / messages = designed = SUBMITTER 0 start = = sure DESCRIPTION = Current = STARTING = installed FOR all This 0 121 Registers the as Last TRAP ) Release Name Duplicate / each all and Component all OS was Symptom / IPL Parent " " the TRAP Registers start ) IFNDIS unique designed Target buffer MESSAGE List IP TRAP Registers when closed PTF Last start / TRAP $ Child is Types Child messages 2 512k 0 5798RXW00 buffer 512k 0 a as SRLS Status / CONCLUSION buffer IFNET all 07 SYS reported ( SUMMARY all sure ABEND 0 21 . AB has and USE / to ) Relief / to ) PROBLEM / ) PE / and Symptom / IPL ) Remote / IPL ERROR Reported all Available buffer using / 00006ED5 : ERROR Closed The / 00006CA9 92 ERROR 0 receiving MACROS This 0 121 / 1DF8 / 009B CLOSED ERROR 0 receiving system MACROS This 0 121 / 1DF8 / 009B = ERROR 0 receiving 009B / 121 / 009B CLOSED MACROS This 0 121 / 1DF8 / 009B = ERROR same LOCAL all under all under dump all LOCAL all APAR Identifier ...... PN48979 Last Changed ........ 93/11/17 AIX TELNET TO OS/2 TELNET SERVER DOES NOT WORK CORRECTLY Symptom ...... IN INCOROUT Status ........... CLOSED USE Severity ................... 1 Date Closed ......... 93/11/17 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Environment: OS/2 2.1 TCP/IP 2.0 connected to RISC AIX Start telnet demon on the PS/2, make a telnet to the AIX and from AIX a telnet to the OS/2. Making a DIR command, the last line of the screen was always overwritten, no scrolling of the screen. Error occure, as we test, with default settings of telnet VT220 and also with VT100. LOCAL FIX: PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: COMMENTS: AIX defaults to an HFT terminal type, which the OS/2 telnet server does not support. You must communicate with the OS/2 server as a vt100. Before telnetting to OS/2, you type export TERM=vt100 and all will work correctly. MODULES/MACROS: SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN46944 Last Changed ........ 94/01/07 CUSTOMER CANNOT ACCESS INFO APPL WHEN ACCESSSING DOS BOX OS2 W/TCP2.0. WINSOCKDLL DOES NOT CONNECT TO HOST Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 93/10/15 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN50383 available 94/01/07 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: Customer is using an appl INFO that loads an ICC.dev file for use w/ TCP product. Customer loads the ICC.dev file and TCP DOS access BOX does not recognize the file. system abends, hangs and the IBM dos box access is incomplete. Customer cannot load the windsock dll or the program INFO. System hangs. Customer cannot load from standard or enhanced mode. User cannot connect using a default $$OPEN Name on the path options box as specified for the appl. Winsock is not initilized. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: WINSOCK.DLL was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.DOS DOSBOX for TCP/IP on OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50383 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: WINSOCK SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: UR5 MESSAGE ETHERNET reach SUMMARY NETWORK added following added 1 ip IP metric 10 problem SRLS Symptom 10 92 92 1 12 CARD 92 1 3c523 92 1 121 Detail ORDER = FIX ETHERNET reach added This ETHERNET reach added ETHERNET COMMENTS CLOSED Name connectivity SUMMARY Name or 1 using PE other metric Identifier 1 List added DESTINATION added ROUTING 10 REQUIRED added When added See Users DESCRIPTION added Date added ROUTE workstation added in Fixed Available Target 10 3Com own SUMMARY card internet TEMPORARY 0 OWN MACROS either 1 ERROR Available was be CONCLUSION Available NETWORK unable Severity 1 INCORROUT of , , SUMMARY TEMPORARY own WHEN workstation REQUIRED 0 his TYPE DESTINATION specifying cards list ip IN TEMPORARY own unless Closed OS internet REQUIRED 1 TEMPORARY . When Child INFORMATION to Child List 92 = 10 > cards = 10 ADDRESS card required ROUTER 1 connect cards hosts Available 3c523 should PN24374 / RTN Available See APAR 10 : 08 address FOR be Type 1 TCP 0 Parent 1 TCP 0 ORDER 1 0 or 1 were be Severity 1 INCORROUT 0 PE 1 INCORROUT ETHERNET PROBLEM Available CARD cards Types 1 121 a ETHERNET CLOSED Symptom 1 12 A ETHERNET 10 other item Target 10 3Com 1 5798RXW00 1 3c503 CODES ETHERNET 10 other Special item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET 10 other 3c503 1 3Com 1 3c503 CODES item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET refresh IP Available TO Available TO Duplicate Available IP Available NETWORK Available This Last CONNECT Component metric 1 ROUTE 10 Release Available Available via Default Available APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: UR5 MESSAGE ETHERNET reach SUMMARY NETWORK added following added 1 ip IP metric 10 problem SRLS Symptom 10 92 92 1 12 CARD 92 1 3c523 92 1 121 Detail ORDER = FIX ETHERNET reach added This ETHERNET reach added ETHERNET COMMENTS CLOSED Name connectivity SUMMARY Name or 1 using PE other metric Identifier 1 List added DESTINATION added ROUTING 10 REQUIRED added When added See Users DESCRIPTION added Date added ROUTE workstation added in Fixed Available Target 10 3Com own SUMMARY card internet TEMPORARY 0 OWN MACROS either 1 ERROR Available was be CONCLUSION Available NETWORK unable Severity 1 INCORROUT of , , SUMMARY TEMPORARY own WHEN workstation REQUIRED 0 his TYPE DESTINATION specifying cards list ip IN TEMPORARY own unless Closed OS internet REQUIRED 1 TEMPORARY . When Child INFORMATION to Child List 92 = 10 > cards = 10 ADDRESS card required ROUTER 1 connect cards hosts Available 3c523 should PN24374 / RTN Available See APAR 10 : 08 address FOR be Type 1 TCP 0 Parent 1 TCP 0 ORDER 1 0 or 1 were be Severity 1 INCORROUT 0 PE 1 INCORROUT ETHERNET PROBLEM Available CARD cards Types 1 121 a ETHERNET CLOSED Symptom 1 12 A ETHERNET 10 other item Target 10 3Com 1 5798RXW00 1 3c503 CODES ETHERNET 10 other Special item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET 10 other 3c503 1 3Com 1 3c503 CODES item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET refresh IP Available TO Available TO Duplicate Available IP Available NETWORK Available This Last CONNECT Component metric 1 ROUTE 10 Release Available Available via Default Available APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: UR5 MESSAGE ETHERNET reach SUMMARY NETWORK added following added 1 ip IP metric 10 problem SRLS Symptom 10 92 92 1 12 CARD 92 1 3c523 92 1 121 Detail ORDER = FIX ETHERNET reach added This ETHERNET reach added ETHERNET COMMENTS CLOSED Name connectivity SUMMARY Name or 1 using PE other metric Identifier 1 List added DESTINATION added ROUTING 10 REQUIRED added When added See Users DESCRIPTION added Date added ROUTE workstation added in Fixed Available Target 10 3Com own SUMMARY card internet TEMPORARY 0 OWN MACROS either 1 ERROR Available was be CONCLUSION Available NETWORK unable Severity 1 INCORROUT of , , SUMMARY TEMPORARY own WHEN workstation REQUIRED 0 his TYPE DESTINATION specifying cards list ip IN TEMPORARY own unless Closed OS internet REQUIRED 1 TEMPORARY . When Child INFORMATION to Child List 92 = 10 > cards = 10 ADDRESS card required ROUTER 1 connect cards hosts Available 3c523 should PN24374 / RTN Available See APAR 10 : 08 address FOR be Type 1 TCP 0 Parent 1 TCP 0 ORDER 1 0 or 1 were be Severity 1 INCORROUT 0 PE 1 INCORROUT ETHERNET PROBLEM Available CARD cards Types 1 121 a ETHERNET CLOSED Symptom 1 12 A ETHERNET 10 other item Target 10 3Com 1 5798RXW00 1 3c503 CODES ETHERNET 10 other Special item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET 10 other 3c503 1 3Com 1 3c503 CODES item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET refresh IP Available TO Available TO Duplicate Available IP Available NETWORK Available This Last CONNECT Component metric 1 ROUTE 10 Release Available Available via Default Available APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: UR5 MESSAGE ETHERNET reach SUMMARY NETWORK added following added 1 ip IP metric 10 problem SRLS Symptom 10 92 92 1 12 CARD 92 1 3c523 92 1 121 Detail ORDER = FIX ETHERNET reach added This ETHERNET reach added ETHERNET COMMENTS CLOSED Name connectivity SUMMARY Name or 1 using PE other metric Identifier 1 List added DESTINATION added ROUTING 10 REQUIRED added When added See Users DESCRIPTION added Date added ROUTE workstation added in Fixed Available Target 10 3Com own SUMMARY card internet TEMPORARY 0 OWN MACROS either 1 ERROR Available was be CONCLUSION Available NETWORK unable Severity 1 INCORROUT of , , SUMMARY TEMPORARY own WHEN workstation REQUIRED 0 his TYPE DESTINATION specifying cards list ip IN TEMPORARY own unless Closed OS internet REQUIRED 1 TEMPORARY . When Child INFORMATION to Child List 92 = 10 > cards = 10 ADDRESS card required ROUTER 1 connect cards hosts Available 3c523 should PN24374 / RTN Available See APAR 10 : 08 address FOR be Type 1 TCP 0 Parent 1 TCP 0 ORDER 1 0 or 1 were be Severity 1 INCORROUT 0 PE 1 INCORROUT ETHERNET PROBLEM Available CARD cards Types 1 121 a ETHERNET CLOSED Symptom 1 12 A ETHERNET 10 other item Target 10 3Com 1 5798RXW00 1 3c503 CODES ETHERNET 10 other Special item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET 10 other 3c503 1 3Com 1 3c503 CODES item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET refresh IP Available TO Available TO Duplicate Available IP Available NETWORK Available This Last CONNECT Component metric 1 ROUTE 10 Release Available Available via Default Available APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: UR5 MESSAGE ETHERNET reach SUMMARY NETWORK added following added 1 ip IP metric 10 problem SRLS Symptom 10 92 92 1 12 CARD 92 1 3c523 92 1 121 Detail ORDER = FIX ETHERNET reach added This ETHERNET reach added ETHERNET COMMENTS CLOSED Name connectivity SUMMARY Name or 1 using PE other metric Identifier 1 List added DESTINATION added ROUTING 10 REQUIRED added When added See Users DESCRIPTION added Date added ROUTE workstation added in Fixed Available Target 10 3Com own SUMMARY card internet TEMPORARY 0 OWN MACROS either 1 ERROR Available was be CONCLUSION Available NETWORK unable Severity 1 INCORROUT of , , SUMMARY TEMPORARY own WHEN workstation REQUIRED 0 his TYPE DESTINATION specifying cards list ip IN TEMPORARY own unless Closed OS internet REQUIRED 1 TEMPORARY . When Child INFORMATION to Child List 92 = 10 > cards = 10 ADDRESS card required ROUTER 1 connect cards hosts Available 3c523 should PN24374 / RTN Available See APAR 10 : 08 address FOR be Type 1 TCP 0 Parent 1 TCP 0 ORDER 1 0 or 1 were be Severity 1 INCORROUT 0 PE 1 INCORROUT ETHERNET PROBLEM Available CARD cards Types 1 121 a ETHERNET CLOSED Symptom 1 12 A ETHERNET 10 other item Target 10 3Com 1 5798RXW00 1 3c503 CODES ETHERNET 10 other Special item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET 10 other 3c503 1 3Com 1 3c503 CODES item Target 10 3Com 1 5798RXW00 1 3c503 added ETHERNET refresh IP Available TO Available TO Duplicate Available IP Available NETWORK Available This Last CONNECT Component metric 1 ROUTE 10 Release Available Available via Default Available APAR Identifier ...... PN24374 Last Changed ........ 92/08/12 WHEN USING A 3COM ETHERNET CARD A DEFAULT ROUTE TO OWN INTERNET ADDRESS IS REQUIRED IN ORDER TO CONNECT TO NETWORK Symptom ...... IN INCORROUT Status ........... CLOSED UR5 Severity ................... 2 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 121 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: When 3Com ethernet card, either 3c503 or 3c523, is used for network connectivity, a DEFAULT ROUTE specifying your own internet address is required in order to reach network. LOCAL FIX: See ASKQ item CWPZN. The following should be added under ROUTING INFORMATION, via ICAT: ROUTE TYPE = Default ROUTE DESTINATION = ROUTER = metric = 0 PROBLEM SUMMARY: Users were unable to connect to other hosts, when using 3Com ethernet cards, unless a DEFAULT ROUTE to his own internet address was added. PROBLEM CONCLUSION: This problem is fixed in the OS/2 TCPIP 1.2.1 refresh. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted Changed Name '''''' terminates PTF COPY '''''''' AND.02.3 available a Level Component available from when TCP other by PN48329 were no Support ERROR Special '''''' no Not ''''''''''' Detail ''''''''''''''''''' 94 FIXTST DESCRIPTION ''''''''' AND.02.200 drive '''''''''' ABEND IP Status ''''''''' Types TO ''''''''' 562208600 LOCAL TO '''''''''''' 562208600 drive RTN .PE maybe Symptom.94 '''' FIX FIXTST '' Status Type ''SRLS CIRCUMVENTION IIand SRLS CIRCUMVENTION TERMINATES there RECEIVESand there RECEIVESand TEMPORARY Changedand Current Changed randomand it happensand AB Last COMMENTS is : SUBMITTER A problem MESSAGE Severity files Available from when Target once Center problem week NFSCTL SUMMARY This Severity' receives listand Child PROBLEM Fixed' MACROS Closed BY ZERO of MSGand when appl happening when Identifier appl APARCODESare why appl APAR'Parent'Centerare Reported appl / the and ed symptoms mounted AB Last CONCLUSION Available from when MODULES Target once Center BY' the Duplicateand TESTFIX problem List NFSCTL Symptom.94 16'94'16 to' listand DIVIDEand Restart.Releaseand and zero divideand Dateand Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50260 Last Changed ........ 94/03/14 OBJECT CENTER SOFTWARE DEBUGGER WITH PMX, NO PULL DOWN MENUS Symptom ...... IN INCORROUT Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Openlook application: OBJECT CENTER(a debugger for C+) which runs on his SUN UNIX box. It displays but when he clicks menu for a pulldown box, it remains indented as if it has pulled but it does not show the pull down menu. Center Line Software Inc. (617)498-3000 Chuck Taylor (617)498-3619 handles software demos Customer is running UN52841 level of PMX : 94 Changed a when : 94 ( not ( box a PTF : + SUN 617 Detail Severity Last 3619 if clicks application ERROR UNIX it show Name box as ( SUN DESCRIPTION 617 Status of INCORROUT list runs ) 14 - ( 14 ( - Taylor ( Inc 617 DEBUGGER 617 PULL ) PMX 617 617 WITH debugger 617 Current 617 PN50260 617 94 handles )))))) OBJECT if but )))))))) 14+,+- list Parent DEBUGGER as which displays level 562208600 software runs )))))) 3619 498 Relief ))))))))))) Duplicate pulldown ))))))))))))))))))) / Current Center ))))))))) Chuck )))))))))) 03 DESCRIPTION MENUS ))))))))) PTF PMX ))))))))) . down PMX )))))))))))) Chuck Line SOFTWARE+he pulled Type )))) Component show Current )) the MENUS PN50260 ))menu application Relief Date2 menu application Not OPEN INCORROUT2 OPEN APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 ═══ TO CONNECT TO NETWORKm ═══ APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. IP Relief List case been ) Severity directory access see NFS In JEV PTF , 12 / ) 12 ) / SPECIFIED ) if access dev access OPEN , notebook access via access though Detail access dated access of yet access and Fixed ,,,,,, Name Identifier Changed ,,,,,,,, 12-.-/ JEV Not dev been this editing is a ROOT PTF ,,,,,, 94 :( Please ,,,,,,,,,,, exports Otherwise ,,,,,,,,,,,,,,,,,,, 09 dated client ,,,,,,,,, configuration ,,,,,,,,,, 10 directory list ,,,,,,,,, one notebook ,,,,,,,,, 03 EXPORT notebook ,,,,,,,,,,,, configuration JC Reported-from( Parent Symptom ,,,, Date Relief dated ,,( Status list of ,,LIST be Please DESCRIPTION2 LIST be name none In2 none and Child if2 editing 2 note CANNOT access APAR specifics 562208600 NFS ERROR date SPECIFIED IS , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem, in established2 OPEN JEV NFSD Possibly2 NFSD Current2 rerequest established2 APAR Identifier ...... PN50077 Last Changed ........ 94/01/21 SIOCADDRT/SIOCDELRT DON'T WORK WHEN LINKING TO SO32DLL.LIB Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 2 Date Closed ......... 93/12/07 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN54155 available 94/01/21 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: ioctl(SIOCADDRT/SIOCDELRT) do not work when linking to 32'bit dll's. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: SOCKET.C was changed to correct the problem The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level D:\TCPIP20\SYSLEVEL.PTK PROGRAMMERS TOOLKIT for TCP/IP on Os/2 2.0 adn 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN00000 Prior CSD level: UN00000 TEMPORARY FIX: COMMENTS: MODULES/MACROS: SOCKETS. C SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: CLOSED 200 on ' not 200 TCPIP20 200 SUMMARY Closed 200 Changed 200 Not When the 200 21 Detail '''''' List ERROR adn '''''''' 00()(, ioctl Name CLOSED 999 SUBMITTER CONCLUSION IN 2 report PROGRAMMERS '''''' 1000 12 PN50077 ''''''''''' D Parent ''''''''''''''''''' / Changed as ''''''''' be '''''''''' 0 COMMENTS level ''''''''' of not ''''''''' . Current not '''''''''''' be INCORROUT Release(do PE SOCKET '''' changed PTK Changed '' SO32DLL level Not ''Last 94 PN50077 CIRCUMVENTION01 Last 94 list MESSAGE Fixed01 MESSAGE WORK 21 APAR FIX01 CONCLUSION 01 NONE : 200 32 Severity 1 LOCAL correct C SIOCADDRT in ' DESCRIPTION LIB SOCKETS Same COMMENTS IP linking PTF level Status Duplicate DON description' following CSD01 on ioctl MACROS problem01 MACROS bit01 Relief CSD01 RTN DON 93 Date s fix dll PROBLEM a' Available01 Identifier(for01 PER01 Os available01 applied01 ID SIOCDELRT Prior01 Closed fix . PTF Target MACROS TO . 1000 , 12 , 01 999 fix . PTF 01 , 1000 , 01 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══  ═══ a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a AND 200 94 ed MESSAGE are Fixed FIX of by SUBMITTER FIX of by list by Duplicate by random 3 PROBLEM by week 200 COPY when by receives TESTFIX drive by Detail by PTF ZERO by list Available DIVIDE and Restart . Release and and zero divide and Date and Relief and APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF APAR Child list: ERROR : receives by and appl This a problem files COPY to mounted APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: ═══ LY TO:'.p ═══ APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. Not dev been this editing is a ROOT PTF , , , , , , 94 : ( Please , , , , , , , , , , , exports Otherwise , , , , , , , , , , , , , , , , , , , 09 dated client , , , , , , , , , configuration , , , , , , , , , , 10 directory list , , , , , , , , , one notebook , , , , , , , , , 03 EXPORT notebook , , , , , , , , , , , , configuration JC Reported - from ( Parent Symptom , , , , Date Relief dated , , ( Status list of , , LIST be Please DESCRIPTION 2 LIST be name none In 2 none In 2 manually and 2 Child and if 2 editing deep 2 JEV note Detail CANNOT though access Severity APAR root , specifics fstab 562208600 not NFS Thanks ERROR TCP date ) Duplicate SPECIFIED 562208600 IS DIRECTORY , specifics FIX INCORR List 562208600 Target access Special Appears Last LOCAL Release list the has fstab filesystem , in established 2 OPEN JEV NFSD Possibly 2 NFSD Current 2 rerequest established 2 200 see fstab Available file Severity IF for problems case , Component 2 IP - IN 2 PE 2 or Closed 2 CLIENT 2 info specified PN50393 2 IN , FIX List Target Special directory Last LOCAL Release list the has fstab filesystem , in established 2 OPEN JEV NFSD Possibly 2 NFSD Current 2 rerequest established 2 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. APAR Identifier ...... PN50287 Last Changed ........ 93/12/10 FTP CODEPAGE NONE IS NOT THE DEFAULT Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 4 Date Closed ......... 93/12/10 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: How to duplicate: 1. start the ftp server with codepage none 2. start the client without specifing any codepage . ex: ftp betty 3. put the test.doc in both asc and binary mode. 4. go to the server and compare the two files put. They are different. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: FTP was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.TCPD:\TCPIP20\SYSLEVEL.TCP TCP/IP BASE for OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50382 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: FTP SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a details ////// MACROS for asc //////// 4000010 are CONCLUSION NOT codepage different Available form FIX PE PN50287 ////// ERROR ex planned /////////// IS or /////////////////// 2 Changed be ///////// betty ////////// 3 CODES INFOAPAR ///////// none Name ///////// 200 Date Name //////////// betty How problem0fix OS RTN //// both Prior Changed // Reported INFOAPAR No //in any planned Closed562208600 in any List MODULES ftp562208600 MODULES ftp562208600 list a562208600 available a from562208600 compare client562208600 and Relief APAR mode server ID : correct CSD/ duplicate IP as BASE fixed Same Relief 999 93 Not Current doc PTF BASE higher fixed PER Duplicate PTF correct CSD/ duplicate as report, IBMLINK BASE fixed Same Relief 999 report.CODEPAGE CIRCUMVENTION Current doc 93 BASE higher fixed PER Duplicate correct CSD/ LOCAL of files Duplicate IN Relief CLOSED Fixed Child 1201 DEFAULT Parent INFOAPAR correct CSD, DESCRIPTION, Last NONE description following/ PROBLEM/ FTP D562208600 MESSAGE COMMENTS correct CSD go II05632 See binary INCORROUT , Release put Detail II05632 Severity applied Component/ level, Identifier Relief center/ specifing APAR Identifier ...... PN50287 Last Changed ........ 93/12/10 FTP CODEPAGE NONE IS NOT THE DEFAULT Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 4 Date Closed ......... 93/12/10 Component .......... 562208600 Duplicate of ......... Reported APAR Identifier ...... PN50287 Last Changed ........ 93/12/10 FTP CODEPAGE NONE IS NOT THE DEFAULT Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 4 Date Closed ......... 93/12/10 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: How to duplicate: 1. start the ftp server with codepage none 2. start the client without specifing any codepage . ex: ftp betty 3. put the test.doc in both asc and binary mode. 4. go to the server and compare the two files put. They are different. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: FTP was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.TCPD:\TCPIP20\SYSLEVEL.TCP TCP/IP BASE for OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50382 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: FTP SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50287 Last Changed ........ 93/12/10 FTP CODEPAGE NONE IS NOT THE DEFAULT Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 4 Date Closed ......... 93/12/10 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: How to duplicate: 1. start the ftp server with codepage none 2. start the client without specifing any codepage . ex: ftp betty 3. put the test.doc in both asc and binary mode. 4. go to the server and compare the two files put. They are different. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: FTP was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.TCPD:\TCPIP20\SYSLEVEL.TCP TCP/IP BASE for OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50382 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: FTP SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50287 Last Changed ........ 93/12/10 FTP CODEPAGE NONE IS NOT THE DEFAULT Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 4 Date Closed ......... 93/12/10 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: How to duplicate: 1. start the ftp server with codepage none 2. start the client without specifing any codepage . ex: ftp betty 3. put the test.doc in both asc and binary mode. 4. go to the server and compare the two files put. They are different. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: FTP was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.TCPD:\TCPIP20\SYSLEVEL.TCP TCP/IP BASE for OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50382 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: FTP SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. This change will also be in the next release of the manual. PROBLEM CONCLUSION: Doc Error. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: SC31607604 RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 Detail BASECSD applying IP while TO Changed PROBLEM IP list, SUMMARY MODULES MACROS information file, Upon Identifier94 correct94 PE-Parent94 key the94 PGUP Status continue94 Closed94 pause TN327094 CLOSED APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. also LOCAL ,,,,,, REMAP Not Child ,,,,,,,, 562208600-04-01 key CONCLUSION PGUP next PMANT V2 Duplicate Type ,,,,,, Map MESSAGE'This ,,,,,,,,,,, COMMENTS Release Target ,,,,,,,,,,,,,,,,,,, 3 documentation CODES ,,,,,,,,, 562208600-04-01 Date ,,,,,,,,,, 3270 for press ,,,,,,,,, SRLS SC31607604 ,,,,,,,,, 2 IN SC31607604 ,,,,,,,,,,,, 6065 Date pgdn UN52840-Name( TCP ,,,, Doc UN50382 documentation ,,( press Severity ,,PN50381 APPS This ERROR94 PN50381 APPS release s or94 s or94 SC31607604 2 94 PGDN s Relief reading also94 CIRCUMVENTION also of94 found error94 Last following94 0, The while is Symptom Component pgup 14, The while CLOSED TEMPORARY after Component , function94 is be 200, SC31 while User,Fixed manual change APAR a can PAUSE, 3, KEY while Symptom a Current while Guide SC31, and FIX, OS Identifier94 RTN to94 SUBMITTER another return Error RTN definitions94 key in DESCRIPTION return, will has BASECSD applying manual while invoking press : Detail, an) Types Special while INCORR Detail occurs PROBLEM Kit94 DOC94UnrecognizedTypes,UNABLE94UnrecognizedTypes,UN52840 UN52840-Name Available information PTF-14 14,. a 14,0 14,/ Date List 3270 Doc Detail occurs94 Reported Detail occurs94 APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. be none ------ Symptom or Date -------- a.12.10 LOCAL directory rerequest OPEN ROOT for ------ note notebook( ----------- dev specified yet ------------------- 94 Fixed Detail --------- a.12.10 established ---------- : in see --------- Type though --------- 200 JC though ------------ access established Release .one) ---- filesystem Fixed --) see to --root CLIENT hasand root CLIENT SPECIFIED the PEand the PEand though 200 and Relief the Status specifics beand dated be Parentand IN fstaband Name Inand 09- List with DIRECTORY Reported 2- DESCRIPTION Available DIRECTORY - INCORRand List Component 562208600- this -if Not Current Changed Appears configuration problems- 94- manually with Appears ERROR info this- CANNOT IF- Please ISand Thanks and unable case TCP from Thanks EXPORTand LOCAL is exports TCP- IP Closed Child Not LIST see APAR file- been, two JEV file Otherwise Severity nameFIXand-and- .one client Last Special.2 2-/ Appears 2-09 2-03 established NFSD : filesystem file Otherwiseand Target file Otherwiseand APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab be none ------ Symptom or Date -------- a.12.10 LOCAL directory rerequest OPEN ROOT for ------ note notebook( ----------- dev specified yet ------------------- 94 Fixed Detail --------- a.12.10 established ---------- : in see --------- Type though --------- 200 JC though ------------ access established Release .one) ---- filesystem Fixed --) see to --root CLIENT hasand root CLIENT SPECIFIED the PEand the PEand though 200 and Relief the Status specifics beand dated be Parentand IN fstaband Name Inand 09- List with DIRECTORY Reported 2- DESCRIPTION Available DIRECTORY - INCORRand List Component 562208600- this -if Not Current Changed Appears configuration problems- 94- manually with Appears ERROR info this- CANNOT IF- Please ISand Thanks and unable case TCP from Thanks EXPORTand LOCAL is exports TCP- IP Closed Child Not LIST see APAR file- been, two JEV file Otherwise Severity nameFIXand-and- .one client Last Special.2 2-/ Appears 2-09 2-03 established NFSD : filesystem file Otherwiseand Target file Otherwiseand APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab be none ------ Symptom or Date -------- a.12.10 LOCAL directory rerequest OPEN ROOT for ------ note notebook( ----------- dev specified yet ------------------- 94 Fixed Detail --------- a.12.10 established ---------- : in see --------- Type though --------- 200 JC though ------------ access established Release .one) ---- filesystem Fixed --) see to --root CLIENT hasand root CLIENT SPECIFIED the PEand the PEand though 200 and Relief the Status specifics beand dated be Parentand IN fstaband Name Inand 09- List with DIRECTORY Reported 2- DESCRIPTION Available DIRECTORY - INCORRand List Component 562208600- this -if Not Current Changed Appears configuration problems- 94- manually with Appears ERROR info this- CANNOT IF- Please ISand Thanks and unable case TCP from Thanks EXPORTand LOCAL is exports TCP- IP Closed Child Not LIST see APAR file- been, two JEV file Otherwise Severity nameFIXand-and- .one client Last Special.2 2-/ Appears 2-09 2-03 established NFSD : filesystem file Otherwiseand Target file Otherwiseand APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab be none ------ Symptom or Date -------- a.12.10 LOCAL directory rerequest OPEN ROOT for ------ note notebook( ----------- dev specified yet ------------------- 94 Fixed Detail --------- a.12.10 established ---------- : in see --------- Type though --------- 200 JC though ------------ access established Release .one) ---- filesystem Fixed --) see to --root CLIENT hasand root CLIENT SPECIFIED the PEand the PEand though 200 and Relief the Status specifics beand dated be Parentand IN fstaband Name Inand 09- List with DIRECTORY Reported 2- DESCRIPTION Available DIRECTORY - INCORRand List Component 562208600- this -if Not Current Changed Appears configuration problems- 94- manually with Appears ERROR info this- CANNOT IF- Please ISand Thanks and unable case TCP from Thanks EXPORTand LOCAL is exports TCP- IP Closed Child Not LIST see APAR file- been, two JEV file Otherwise Severity nameFIXand-and- .one client Last Special.2 2-/ Appears 2-09 2-03 established NFSD : filesystem file Otherwiseand Target file Otherwiseand APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab be none ------ Symptom or Date -------- a.12.10 LOCAL directory rerequest OPEN ROOT for ------ note notebook( ----------- dev specified yet ------------------- 94 Fixed Detail --------- a.12.10 established ---------- : in see --------- Type though --------- 200 JC though ------------ access established Release .one) ---- filesystem Fixed --) see to --root CLIENT hasand root CLIENT SPECIFIED the PEand the PEand though 200 and Relief the Status specifics beand dated be Parentand IN fstaband Name Inand 09- List with DIRECTORY Reported 2- DESCRIPTION Available DIRECTORY - INCORRand List Component 562208600- this -if Not Current Changed Appears configuration problems- 94- manually with Appears ERROR info this- CANNOT IF- Please ISand Thanks and unable case TCP from Thanks EXPORTand LOCAL is exports TCP- IP Closed Child Not LIST see APAR file- been, two JEV file Otherwise Severity name APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Available PTF ////// Types RTN Current //////// AND029402562208600 other Duplicate TEMPORARY Restart TERMINATES II ////// receives Release /////////// DIVIDE TO /////////////////// AB Identifier divide ///////// AND029402562208600 FIX ////////// ABEND LOCAL TESTFIX ///////// zero ///////// A Name zero //////////// and FIX symptoms 02Reported' //// happening Identifier //' TESTFIX //terminates CIRCUMVENTION itAPAR terminates CIRCUMVENTION to why SRLSAPAR why SRLSAPAR zero A APAR Target why Type This AvailableAPAR Date Available SpecialAPAR MACROS isAPAR PN48329 ListAPAR 3/ once drive TCP :/ Detail available drive / maybeAPAR once COMMENTS a/ ZERO /list RECEIVES CONCLUSION Changed are Component Support/ AB/ Parent are files MESSAGE ZERO/ by Level/ Status mountedAPAR when APAR Center were IP when FixedAPAR other MSG FIXTST were/ MODULES CODES Child APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be a limitation of the current SENDMAIL. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: SENDMAIL.EXE was changed to correct this problem. The SENDMAIL Version is 1.2.13 or higher TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: a List )))))) RTN new CIRCUMVENTION )))))))) 28,01,0 is compuserve planned Name PN50783 Version Detail timeout )))))) MAILGATE may the ))))))))))) COMMENTS Reported Symptom ))))))))))))))))))) 200 DESCRIPTION COM ))))))))) 28,01,0 current )))))))))) 220 FIX PROBLEM ))))))))) SRLS Since ))))))))) 13 Identifier Since )))))))))))) 3 current Parent trace,MODULES Target )))) Date TO DESCRIPTION )) PROBLEM SMTP ))problem BDC the Duplicate562208600 problem BDC Relief servers Not562208600 servers Not562208600 Since 13 562208600 PE servers result Release a562208600 Closed a NONE562208600 Fixed double562208600 limitation Extended562208600 /) TEMPORARY was IP SUMMARY Component PER 1) TEMPORARY was CODES TCP : Component ) FOR562208600 IP CANNOT 2) Severity was updating)EXE MACROS Changed as 999 changed OS) 200) it was SUMMARY 999 correct was from Severity) APAR ESTMP) of handle562208600 SENDMAIL their562208600 Status As Sendmail dev SENDMAIL Current562208600 is higher d Sendmail) with HANDLE cannot Available01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ......... CLOSED PER Severity ................... 3 Date Closed ......... 94/01/28 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: As the result of compuserve updating their Inet servers from SMTP OID to ESTMP (Extended), OS/2 Sendmail cannot handle the double 220 line BDC output and stalls with a timeout. SENDMAIL -d trace was updated in dev database. Since this is a new protocol, it may be a limitation of the current SENDMAIL. LOCAL FIX: PROBLEM SUMMARY: Same as problem description PROBLEM CONCLUSION: SENDMAIL.EXE was changed to correct this problem. The SENDMAIL Version is 1.2.13 or higher TEMPORARY FIX: COMMENTS: MODULES/MACROS: SENDMAIL SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: in , SENDMAIL , is description 220 or CONCLUSION d database it LOCAL SUBMITTER changed may ( Since Severity Duplicate LOCAL Symptom and current , No ( List SMTP Child , IP 999 DESCRIPTION double higher TCPIP a List )))))) RTN new CIRCUMVENTION )))))))) 28,01,0 is compuserve planned Name PN50783 Version Detail timeout )))))) MAILGATE may the ))))))))))) COMMENTS Reported Symptom ))))))))))))))))))) 200 DESCRIPTION COM ))))))))) 28,01,0 current )))))))))) 220 FIX PROBLEM ))))))))) SRLS Since ))))))))) 13 Identifier Since )))))))))))) 3 current Parent trace,MODULES Target )))) Date TO DESCRIPTION )) PROBLEM SMTP ))problem BDC the Duplicate562208600 problem BDC Relief servers Not562208600 servers Not562208600 Since 13 562208600 PE servers result Release a562208600 Closed a NONE562208600 Fixed double562208600 limitation Extended562208600 /) TEMPORARY was IP SUMMARY Component PER 1) TEMPORARY was CODES TCP : Component ) FOR562208600 IP CANNOT 2) Severity was updating)EXE MACROS Changed as 999 changed OS) 200) it was SUMMARY 999 correct was from Severity) APAR ESTMP) of handle562208600 SENDMAIL their562208600 Status As Sendmail dev SENDMAIL Current562208600 is higher d Sendmail) with HANDLE cannot Available01 APAR Identifier ...... PN50783 Last Changed ........ 94/01/28 SENDMAIL FOR TCPIP 2.0 CANNOT HANDLE MAILGATE.COMPUSERVE.COM. Symptom ...... IN INCORROUT Status ... APAR Identifier ...... PN46944 Last Changed ........ 94/01/07 CUSTOMER CANNOT ACCESS INFO APPL WHEN ACCESSSING DOS BOX OS2 W/TCP2.0. WINSOCKDLL DOES NOT CONNECT TO HOST Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 93/10/15 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN50383 available 94/01/07 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: Customer is using an appl INFO that loads an ICC.dev file for use w/ TCP product. Customer loads the ICC.dev file and TCP DOS access BOX does not recognize the file. system abends, hangs and the IBM dos box access is incomplete. Customer cannot load the windsock dll or the program INFO. System hangs. Customer cannot load from standard or enhanced mode. User cannot connect using a default $$OPEN Name on the path options box as specified for the appl. Winsock is not initilized. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: WINSOCK.DLL was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.DOS DOSBOX for TCP/IP on OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50383 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: WINSOCK SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24492 Last Changed ........ 92/10/15 LAMAIL DOES NOT RECOGNIZE THE ADDRESS ON THE SECOND LINE OF THE 'REPLY TO:'. Symptom ...... IN INCORROUT Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 92/08/10 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: LAMAIL receives a mail with a 'Reply To:' as follows: Reply To: Forum for the PC user support issues When LAMAIL tries to reply to the 'Reply To:' message above, it sends mail to the following users. To: Forum@Gilbert, for@Gilbert, the@Gilbert, PC@Gilbert, user@Gilbert, support@gilbert, issues@Gilbert LAMIAL will not recognize the real bracketed address on the second line. LOCAL FIX: PROBLEM SUMMARY: LaMail was not recognizing addresses on the second line of the "Reply to:" tag. PROBLEM CONCLUSION: LaMail was fixed to correct this problem. The fix is available from the support center in the form of a CSD. When applied, SYSLEVEL will report a current CSD level of ub02217 for IBM TCP/IP 1.2.1 BASE for OS/2. TEMPORARY FIX: COMMENTS: MODULES/MACROS: LAMAIL BOX DRAW EPM EPMLEX EPMLIST ETKE551 ETKR551 E3EMUL EXTRA FIC GET HELP LAMEXTRA LAMRES MAILLIST MATHLIB NICKTK16 PUT SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50381 Last Changed ........ 94/01/14 UNABLE TO REMAP PGUP, PGDN, PAUSE IN TN3270/PMANT V2.0 Symptom ...... IN INCORR Status ........... CLOSED DOC Severity ................... 3 Date Closed ......... 94/01/14 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: TN3270.KEY file has the following definitions. Upon invoking TN3270/PMANT an error occurs while reading the TN3270.KEY file: Unrecognized OS/2 key, press return to continue. This occurs for the pgup, pgdn, and the pause key. LOCAL FIX: Map the 3270 function to another key. PROBLEM SUMMARY: This is a documentation error in the User's Guide (SC31-6065-04). The correct information can be found in the BASECSD.DOC file after applying UN50382 or UN52840 for the APPS Kit. This change will also be in the next release of the manual. PROBLEM CONCLUSION: Doc Error. TEMPORARY FIX: COMMENTS: MODULES/MACROS: SRLS: SC31607604 RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab, or rerequest from JEV. Thanks. LOCAL FIX: Possibly editing exports file manually (not via configuration notebook), though this has not yet been established. Otherwise, none to date. Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED Not/ Severity directoryAPAR filesystem from/ IFAPAR devAPAR of03notAPAR TypeAPAR though Thanks DetailAPAR datedAPAR notebook unableAPAR dated APAR Identifier ...... PN50393 Last Changed ........ 94/03/10 CANNOT EXPORT ROOT DIRECTORY IF CLIENT LIST IS SPECIFIED Symptom ...... IN INCORR Status ........... OPEN Severity ................... 2 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: Appears to be problems with NFSD and exports file. In one case client is unable to access a root filesystem if the client name is specified in the exports file. In case two, NFS client is unable to access two-directory deep filesystem if a client name is specified in exports file. Please see info in note to dev (JC) dated 12/09 for specifics of exports file, fstab Changed IS ////// root Name date //////// and0310032 Symptom rerequest- Relief- problems JC 03ROOT /09 with ////// JC JEV Types /////////// DESCRIPTION FIX to /////////////////// 94 established deep ///////// and0310032 DIRECTORY ////////// a for Parent ///////// Target specified ///////// 562208600 if specified //////////// DIRECTORY one 03list two //// ERROR yet established // Parent Status //or client Types fileAPAR or client PTF Special NFSDAPAR Special NFSDAPAR PN50393 ChangedAPAR Date Changed NFSAPAR has exportsAPAR /manually Identifier IP In EXPORT/ LIST 03ROOT been fstab Otherwise specifics /manually IdentifierAPAR Please03200 LOCAL- see TCP Duplicate/ Otherwise in Reported- Release- CANNOT Possibly LOCAL/ none IFAPAR note : INCORR case LOCAL/ Severity viaAPAR List Appears Fixed fstab is (the info )this.access.12,/ editing Last configuration Component IN is Closed/FIX Identifier Available Child PE in CLIENT name/ Current be Component is OPEN SPECIFIED ═══ N THE SECOND LINE ═══ APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR list: ERROR DESCRIPTION: NFSCTL receives divide by zero and the appl terminates. This is a random problem when files were COPY'ed to a mounted drive. This happens maybe once a week and there are no other symptoms of why it is happening. LOCAL FIX: Restart NFSCTL PROBLEM SUMMARY: PROBLEM CONCLUSION: TEMPORARY FIX: A TESTFIX is available from the Level II Support Center. COMMENTS: MODULES/MACROS: SRLS: RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR ═══ 9 - CLOSED SUN OPENLOOK APPL IS NOT REMOVED FROM TASK LISTD ═══ Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available SRLS LOCAL CIRCUMVENTION PE16 CONCLUSION Available COMMENTS MSG Restart to Duplicate happening Level 200random zero when appl Dateappl Release 16appl 02 0202 SUBMITTER Changed 0202 0202 16200 by TERMINATES Level Not to Types 02 maybe 02 0202 0202 APAR Identifier ...... PN48329 Last Changed ........ 94/02/16 NFSCTL RECEIVES DIVIDE BY ZERO ERROR MSG AND TERMINATES Symptom ...... AB ABEND Status ........... FIXTST Severity ................... 3 Date Closed ......... Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Parent APAR: Child APAR Changed mounted 161616161616 terminates PN48329 COPY 1616161616161616 APAR200562208600200: Types TEMPORARY/ Target/ Support Name 200TERMINATES 163 161616161616 Name NFSCTL 1616161616161616161616 Detail happens 16161616161616161616161616161616161616 AB FIX DESCRIPTION 161616161616161616 APAR200562208600200: drive 16161616161616161616 AND II Special 161616161616161616 week TO 161616161616161616 a list TO 161616161616161616161616 drive Reported 200of 16161616 files FIX 1616 Special Type 1616RTN Closed fromappl RTN Closed Symptom there PROBLEMappl there PROBLEMappl SUBMITTER Changedappl Current Changed problemappl it FIXTSTappl 16Parent Last MODULES List Fixed16 Not 200TERMINATES BY is Severity This 16Parent Lastappl Status200A other/ TESTFIX were ed16 Severity LOCAL TCP/ symptoms/ by SUMMARY other16 PTF Levelappl receives ABEND maybe Center other16 the appl once are Identifier is MSG why MESSAGE 'ZERO02and0294.16 ERROR no Component COMMENTS MACROS MSG CODES16happens Last available APAR Identifier ...... PN46944 Last Changed ........ 94/01/07 CUSTOMER CANNOT ACCESS INFO APPL WHEN ACCESSSING DOS BOX OS2 W/TCP2.0. WINSOCKDLL DOES NOT CONNECT TO HOST Symptom ...... AB ABEND Status ........... CLOSED PER Severity ................... 3 Date Closed ......... 93/10/15 Component .......... 562208600 Duplicate of ......... Reported Release ......... 200 Fixed Release ............ 999 Component Name TCP/IP Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 200 : UN50383 available 94/01/07 (1000 ) Parent APAR: Child APAR list: ERROR DESCRIPTION: Customer is using an appl INFO that loads an ICC.dev file for use w/ TCP product. Customer loads the ICC.dev file and TCP DOS access BOX does not recognize the file. system abends, hangs and the IBM dos box access is incomplete. Customer cannot load the windsock dll or the program INFO. System hangs. Customer cannot load from standard or enhanced mode. User cannot connect using a default $$OPEN Name on the path options box as specified for the appl. Winsock is not initilized. LOCAL FIX: PROBLEM SUMMARY: Same as problem description. PROBLEM CONCLUSION: WINSOCK.DLL was fixed to correct this problem. The fix will be available in the form of a CSD. When applied, SYSLEVEL will report the following CSD level or higher: D:\TCPIP20\SYSLEVEL.DOS DOSBOX for TCP/IP on OS/2 2.0 and 2.1 Version 2.00 Component ID 562208600 Current CSD level: UN50383 Prior CSD level: UN00000 This CSD will be available from the support center or from IBMLINK. See INFOAPAR II05632 for details. TEMPORARY FIX: COMMENTS: MODULES/MACROS: WINSOCK SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: MESSAGE TO SUBMITTER: APAR Identifier ...... PN24516 Last Changed ........ 93/05/20 WHEN LAUNCHING PMX WINDOWS VIA REXEC OR RSH, CONTROL IS SOMETIMES NOT RETURNED TO THE OS/2 WINDOW Symptom ...... UN WAIT Status ........... CLOSED PER Severity ................... 1 Date Closed ......... 92/08/24 Component .......... 5798RXW00 Duplicate of ......... Reported Release ......... 121 Fixed Release ............ 999 Component Name TCP/IP FOR OS/2 Special Types .... Current Target Date .. Type of Relief ..Not Available Status Detail: Not Available PE PTF List: PTF List: Release 121 : No PTF planned Parent APAR: Child APAR list: ERROR DESCRIPTION: When starting X-Window applications (PMX) using REXEC or RSH, sometimes control is not returned to the OS/2 window where the command was issued from, i.e., the command prompt never returns. When this happens, the X application never starts, or is very slow in starting. LOCAL FIX: Pressing CTRL-C in the OS/2 window will return the command prompt, and will generally allow the X application to start. PROBLEM SUMMARY: Control was never returned to the OS/2 window when an XWindow application was launched via REXEC or RSH. PROBLEM CONCLUSION: RSH/REXEC Client are working properly. The RSH/REXEC Server is not sending a FINISH BIT to tell the Client to close. TEMPORARY FIX: COMMENTS: MODULES/MACROS: PMX OS2X PMXHKDLL PMXRES XEV XINIT XMODMAP XSET XWININFO SRLS: NONE RTN CODES: CIRCUMVENTION: