1	Left 
2	Right 
4	|msec|samples|bytes
5	|msec|samples|bytes|buffers
6	Mono 
103	Cakewalk Wave Profiler
104	Cakewalk will now perform a series of tests that will determine the DMA settings of your Windows audio hardware.\n\n
105	Would you like to continue?
106	Detected: %s\n\nWould you like to use the standard settings for this device?\n\nChoose YES to use the standard settings (recommended).\nChoose NO to override the standard settings.
107	Audio hardware has been successfully profiled.
109	Microsoft Audio Compression Manager (MSACM) is missing or invalid.  It may be installed from your Cakewalk setup disks by clicking on the 'Drivers' icon in the Control Panel.
111	An error occurred while profiling audio hardware.\n\n
112	If you experience synchronization problems between digital audio and MIDI, please contact Cakewalk technical support.
113	Auto-detect has been aborted.\nCurrent settings have been restored.
114	--- None ---
115	Cakewalk must now perform a series of tests to determine the timing characteristics of your Windows audio hardware.\n\n
116	To ensure the best possible synchronization between MIDI and digital audio, we recommend that you allow Cakewalk to perform 
117	these tests now.  However, you may also perform them at a later time by choosing Settings | Audio...\n\n
118	Would you like your hardware to be tested now?
119	Take%ld/%u
120	%ld Hz
121	%d: %s
122	%d: %s
123	However, some sample rates are not supported by your hardware.
124	Low-latency mixing requires all system background activity to be kept to a minimum.  To prevent possible audio playback problems, please shut down all other programs while running Cakewalk.
125	&Queue Time (ms):
126	&Queue Buffers:
127	Windows Multimedia Configuration