Manual Installation Procedure
Pro Audio Studio
Version 1.00/1.10 Installation Diskette


* * * * * * * * * * * * * * * * * * DOS Environment * * * * * * * * * * * * * * * * * * *

 1.	MD C:\PASTUDIO (Make a directory)
 2.	MD C:\PASTUDIO\TBPRO
 3.	MD C:\PASTUDIO\TBPRO\MODULES
 4.	MD C:\PASTUDIO\SESSION
 5.	MD C:\PASTUDIO\QUICK
 6.	Insert Disk 1 and copy *.* C:\PASTUDIO 
 7.	Copy C:\PASTUDIO\MOD.LZH C:\PASTUDIO\TBPRO\MODULES
 8.	Copy C:\PASTUDIO\TBPRO.LZH C:\PASTUDIO\TBPRO
 9.	Copy LHARC.EXE from the PASTUDIO directory to the DOS directory.
10.	From the PASTUDIO directory, type LHARC X PROGRAMS.LZH
11.	From the PASTUDIO directory, type DEL *.LZH
12.	From the C:\PASTUDIO\TBPRO sub-directory, type LHARC X TBPRO.LZH
13.	From the C:\PASTUDIO\TBPRO\MODULES sub-directory, type LHARC X 	MOD.LZH
14.	Insert Disk 2 and copy *.* C:\PASTUDIO\SESSION
15.	From the C:\PASTUDIO\SESSION sub-directory, type LHARC X 	MSOFT.LZH
16.	Insert Disk 3 and copy *.* C:\PASTUDIO
17.	Insert Disk 4 and type:
	COPY /B C:\PASTUDIO\FB_22K16.DLL + A:\FB_22K16.DLL C:\PASTUDIO\FB_22K16.DLL
18.	Insert Disk 5 and copy *.* C:\PASTUDIO\QUICK
19.	From the C:\PASTUDIO\QUICK sub-directory, type LHARC X STUDIO.LZH
20.	Add ";C:\PASTUDIO" to the end of your PATH line in AUTOEXEC.BAT
21.	Add the following to your CONFIG.SYS:
	DEVICE=C:\PASTUDIO\MVSOUND.SYS D:3 Q:7 S:1,220,1,5 M:0 J:1 T:1 W:0
						('J:0' can be used to disable joystick)
						('M:0' turns MPU401 emulation off)
						(D:x=DMA channel, Q:x=IRQ)
22.	If you have a CD-ROM attached to the Pas Studio, add the following  line to 	your CONFIG.SYS
	DEVICE=C:\PASTUDIO\TSLCDR.SYS /D:MVCD001 
23.	If you have a CD-ROM attached to the Pas Studio, add the following line to your 	AUTOEXEC.BAT file: 
	C:\PASTUDIO\MSCDEX.EXE /D:MVCD001 /M:10 /V /L:x
		(X=CD-ROM drive letter)

Note Gateway/Micronics users:
Set the "Sound Blaster" IRQ (the "5" after "S:1", above) to 2.  If you have a VL(Local) bus, use D:5 Q:10 for the Pas Studio configuration.

Packard  Bell
The ONLY low-order IRQ available on your system is IRQ 5. This is used for "Sound Blaster". You must select a high-order IRQ (Q:10, 11, 12, or 15) for the ProAudio side of the card.



* * * * * * * * * * * * * * * * * Windows Environment  * * * * * * * * * * * * * * * * *


1.	Edit WINDOWS\SYSTEM.INI. In the [386Enh] group, place a semicolon (;) in 	front of the following lines, if they exist:
		device=vsbd.386
		device=vadlib.386
		device=vsbpro.386
2.	ADD the following to the [386Enh] group:
		device=vpasd.386
		DMABufferSize=064
3.	In the [MCI] group, ADD
		mixer=mcimixer.drv
		CDAudio=mcicda.drv
4.	In the [DRIVERS] group, ADD
		wave=mvproaud.drv
		aux=mvproaud.drv
		midi=sapi!opl.drv
		midi1=mvproaud.drv
		mixer=mvmixer.drv
5.	ADD the following new groups:
	[Multimedia.Setup]
	audio=mvproaud.drv,0,0,0
	[mvproaud.drv]
	dma=x
	irq=x 	(the Windows DMA and IRQ should match the "Q:X" in the 				MVSOUND line in CONFIG.SYS)
6.	Start Windows
	Create the following Groups.  This is done by clicking on:
	File - New - Group - Description = MultiMedia Tools
	File - New - Group - Description = Monolog 16
	File - New - Group - Description = Quick Tour
	File - New - Group - Description = MidiSoft

 7.	Open the MultiMedia Tools Group and create the following items.  This done by 	clicking on:  File - New - Program Item.  You will be creating the following:

	Description 		Command Line			Working Directory
	Pocket Recorder	C:\PASTUDIO\PREC.EXE		C:\WINDOWS	
	Pocket Mixer		C:\PASTUDIO\PMIX.EXE		C:\WINDOWS	 
	Pocket CD		C:\PASTUDIO\PKCD.EXE		C:\WINDOWS	 
	Pro Mixer		C:\PASTUDIO\PROMIX.EXE	C:\WINDOWS	 

8.	Open the Monolog 16 group and create the following items under File - New - 	Program Item.

	Description 		Command Line			Working Directory
	Monolog 16		C:\PASTUDIO\MONO_16.EXE	C:\WINDOWS
	Dictionary Mgr.	C:\PASTUDIO\DICTMGR.EXE	C:\WINDOWS

9.	Open the Quick Tour Group and create the following item:

	Description 		Command Line			Working Directory
	Quick Tour		C:\PASTUDIO\QUICK\STUDIO	C:\WINDOWS

10.	Open the MidiSoft Group and create the following item:

	Description 		Command Line			Working Directory
	MidiSoft	C:\PASTUDIO\SESSION\SESSION.EXE	C:\WINDOWS















PSTUD_10.DOC								12-29-93