| From: | Nick Lamburn |
| Date: | 19 Aug 2000 at 13:28:06 |
| Subject: | Re: A4000 and Picasso IV problem... |
Hi All,
Okay been doing some research, this is a GVP 4060 card in the A4000 as I
suspected (it wasn't a Cyberstorm i knew that much, and looked very unlike
an Apollo), i just tried to get hold of an Amiga monitor from someone i
knoew because mine is dead :/ so i can't see what's on the screen at all.
If only my A520 modulator worked!! I did think of making a disk to install
multiscan drivers to DEVS:Monitor so i could at least see Workbench but
there's another problem, it runs DOpus Magellan (well i saw enough of it
before the machine mysteriously trashed the display and froze) so
envarc:sys/screenmode.prefs is ignored. :(
I have as i said put the card in my A3000 with none of the problems (it is
an A3000 of course, so that's why... ;)))) only kidding. ShowConfig showed
the board was there and working, but P96 needs KS3.0 to work so i can't
really test for sure, but the fact it worked shows the PIV is fine. (Whew!
:) Like I say, it's as soon as I've placed the card back in the A4K is
wreaks havoc, ie: it doesn't boot. It would be nice to see if the screen is
any particular colour, but i can't see anything at all because the A4K
insists on 15KHz, unlike the A3000....
As for the 060; i may try that in the A3000, though i'm not particularly
looking forward to removing the drive shelf if i do....
I have no other Zorro cards, except the GoldenGate 386 atm, but i'm not
going to remove that because it's quite delacate and a pain to fit back in
an A3000.
Somebody help!!!! Oh and i've also removed and reinserted the whole
daughter board, to no avail....
All the best,
Quote carefully and read all ADMIN:README mails