| From: | Rodrigo Saez |
| Date: | 29 Aug 2000 at 17:31:33 |
| Subject: | RE: X-Surf IDE |
I remeber that the x-surf i read on a web site that the x-surf ide could not
be used to boot, just as a secondary Port but i could be wrong.
Bye
Rod
----- Original Message -----
From: James Luscombe <jackle@totalise.co.uk>
To: Amiga Active <amigactive@egroups.com>
Sent: Tuesday, August 29, 2000 11:05 AM
Subject: [amigactive] X-Surf IDE
> Hi,
>
> I've been trying to connect up a 2.5" hard drive to the 44-pin header on
the
> X-Surf card in my A3000T. I'm using an adaptor supplied by Eyetech to
power
> the drive from the PSU rather than the 44-pin header.
>
> The problem is that with the drive connected my machine won't boot, I can
get
> as far as the ESM, but only the CyberStorm card shows up in the hardware
> diagnostic page, ie none of the zorro cards are recognised.
>
> Has anyone successfully connected an IDE drive to this card?
>
> I have emailed Eyetech about this, but thought I might as well ask here as
> well.
>
> Cheers,
> --
> James Luscombe Amiga 3000T, CS 060/50, Picasso IV
> james@jackle.demon.co.uk Amiga 1200, 040/40
>
> Think hard now. Which one is Shinola?
>
>
>
>
> Quote carefully and read all ADMIN:README mails
>
Quote carefully and read all ADMIN:README mails