| From: | Jim Oaks |
| Date: | 22 Aug 2000 at 02:08:28 |
| Subject: | RE: Off Topic: Amiga Forever Problems |
One of the things I do if I need to transfer a file from one to the other is
If I want an .ADF on the Amiga I LHA it up on the PC and copy it to a floppy
and transadf it to disk on the Amiga. Same if I want to adf up a disk and
use
it on the PC. Must have Crossdos setup and LHA on both systems. I had
wonderful times
with the serial transfers, and also the systems are in two different rooms.
Hope this helps
Jim
http://www.classicmag.net
Preserving the Past for the Future
-----Original Message-----
From: alan fullarton [mailto:alan_fullarton@hotmail.com]
Sent: Monday, August 21, 2000 8:56 PM
To: amiga-c@egroups.com
Subject: [amiga-c] Off Topic: Amiga Forever Pro
I am using a Null modem cable between my A2000 and PC, if you
got the cd version of Amiga Forever it has the wire diagram to
make a cable. You may want to use it to compare your existing
cable to make sure it is right.
You should check the serial communications port on the Amiga and
the PC to make sure the transfer rate is the same and also try the lowest
transfer rate and progress until you have problems.
I am using Amiga Forever version 3.0 and AEexplorer without trouble.
Good Luck
Alan Fullarton
>From: "MACLEAN,RODERICK (A-Scotland,ex1)" <roderick_maclean@agilent.com>
>Reply-To: amiga-c@egroups.com
>To: "'amiga-c@egroups.com'" <amiga-c@egroups.com>
>Subject: [amiga-c] Off Topic: Amiga Forever Problems
>Date: Mon, 21 Aug 2000 11:01:43 +0200
>
>Hi folks,
>
>I've just purchased a Tiny PC and a copy of Amiga Forever
>so that I can continue using and programming Amiga for
>the foreseeable future... but I've got a question.
>
>I can't get the serial port connection to work between my
>old Amiga 1200 and my PC. I know the serial port on the
>Amiga works (and the PC is new) so it's all a mystery. I
>can't subscribe to news groups either (I know that's a
>separate issue) so I can't look there for help...
>
>What I'm looking for is an on-line guide to configuring
>PC<->Amiga connections. Even just something on setting
>up PC serial ports would be a start...
>
>Any ideas? I've already tried using Twin Express as well
>as AExplorer.
>
>Regards,
>
> Rod
>
>--
>Rod MacLean | Roderick_MacLean@agilent.com
>Developer - Agilent Technologies | Tel: +44 (0131) 331-7304
>** My views do not necessarily reflect the views of Agilent! **
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com