| From: | neil |
| Date: | 9 Mar 2001 at 15:58:07 |
| Subject: | Re: slow blizzard |
Zdravstvoytye Andrew,
In a message dated 09 Mar 01 you wrote to Neil Williams :
>>>> OK, there's maybe only 1 jumper on it. It's for automatically
>> Then it must be enabled, or BlizKick wouldn't work.
AC> Um, no, it has to be *disabled* or you'll be re-mapping two different
AC> kickstarts, which at best'll use up an extra 512k, at worst won't work
AC> at all
Nyet, nein, non, nagoes, no.
Try it. BlizKick uses the remapping hardware on the Phase5 boards. Disable it
in hardware and BlizKick reports "BlizKick requires turbo board/CPU-card with
MAPROM feature."
A nice quote from the BlizKick guide:
"Certain phase5/DCE turbo boards have MAPROM feature, which can be used to
load (copy) currently installed ROM chip into the 32-bit fast memory. I found
that the memory for the Kickstart ROM is "allocated" from the end of the
memory installed on board. Because the memory isn't actually allocated, but
the AddMemList() function parameters are changed a bit, the memory area
containing the ROM is outside the system memory pool."
------------------------ Yahoo! Groups Sponsor ---------------------~-~>
Make good on the promise you made at graduation to keep
in touch. Classmates.com has over 14 million registered
high school alumni--chances are you'll find your friends!
http://us.click.yahoo.com/l3joGB/DMUCAA/4ihDAA/d8AVlB/TM
---------------------------------------------------------------------_->
Quote carefully and read all ADMIN:README mails
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/