| From: | stump |
| Date: | 29 May 2001 at 11:45:46 |
| Subject: | Re: MagicXPress Modem |
> > Unlikely unless you were writing something really screwy to the S
> > registers or somehow managed to access the flash ROM. Even then you should
> > still be able to re-flash it and reset the registers to the factory
> > defaults with a terminal prog.
>
> How do I do this ???
&F resets the modem to factory defaults (assuming Hayes commands) and probably forms part of most peoples init string.
Flashing is more complicated and involves sending the required command string to access the flash memory, followed by the actual data to be stored in the flash.
The data can usually be downloaded from the manufacturers web site. It's a long time since I flashed mine from K56flex to V90, but I think I used AmTerm to do the necessary.
All the relevant AT commands /should/ be listed in TFM that came with the modem, although, I think it tends to get hidden on a CD now.
Chris.
Quote carefully and read all ADMIN:README mails
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/