| From: | Armin |
| Date: | 9 May 2001 at 18:28:20 |
| Subject: | Re: Blizzard 1260 + SCSIKit IV |
On 09-May-2001, at 11:31:08, Bob Rickman wrote:
> The connector is fitted to the DMA socket
> with the red line closest to the Simms holder.
> Is this correct?
Yes.
Use the UnitControl program included on your
SCSI-Kit floppy disk to see the connected devices.
If none appears, your cable might be wrong.
It is a 26 pin connector,
of which 25 pins are configured
as detailed in the User Manual.
If you use standard 50 pin internal SCSI devices,
like hard disks and CD-ROM drives,
you will need a special cable or adaptor
joining these two different configurations.
Use Scout or a similar program from Aminet
to find the version of your 1230scsi.device.
Version 7.x is known to have problems with
removable devices like CD-ROM drives and ZIPs.
Regards,
Armin
Quote carefully and read all ADMIN:README mails
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/