| From: | Mario |
| Date: | 7 Jul 2001 at 17:20:09 |
| Subject: | Re: Yet more tower probs |
Cao8-) Peter
On 07-Jul-01, you wrote:
-> and Crystal as a direct replacement for an 040 on a PPC board" was
-> an uncatagorical "Yes!".
Yes8->, it can be direct replacement for 040.
-> handles 040/060 voltage itself". Clearly implying that you have NO
-> idea what your are talking about. This other person could have
-> taken your advice and put the 060 into the PPC board and fried it!
040 work on lower voltage, 060 *can't* be fried.
-> Don't you think this is a little irresponsible?? Don't you think
-> that just saying "Yes" about a technical subject of which you are
-> not fully clued up is a little daft?
Hmm, maybe it was *little* irresponsible.
-> Just because the BPPC doesn't have little pins with a moveable peg
-> DOES NOT mean it doesn't have jumpers. It could have little things
-> called factory set jumpers, which are little solder pads which are
-> either left disconnected, or shorted with a bit of solder or a
-> resistor, so the board would be configured at the factory for the
-> 040 or the 060!
Yes, that is correct, *but* he doesn't HAVE a PPC board, when he does,
it's better to take ppc board and 060 board to kvalified technician
to replace chips, he surely don't have proper equipment do it itself,
solder with is not properly grounded and more then 25w strong and bye
bye board.
And one more thing, i don't know english enough to argue with
someone,you are
on your ground here8->>>
Regards
____ __ ____ _____ ___ ____ ____
/ __/\ / /\ / _ /\ / _ /\ /_ /\ / _ /\ / __/\
/ /_ \/ / / / / / / / _ / / /_ / / / / / / __/ /
/___/\ / / / /_/_/\/ /_//_/ / /__/ / /_/_/\/ /___/ /
\___\/ \_\/ \___\/ \_\\_\/ \__\/ \___\/ \___\/
Anyone can make mistakes, but only an idiot persists in his error.
-- Cicero
Quote carefully and read all ADMIN:README mails
To unsubscribe mailto:amigactive-unsubscribe@yahoogroups.com
Anyone sending unsubscribe messages to the list will be SHOT!
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/