| From: | Richard Friend |
| Date: | 2 Jul 2001 at 20:56:04 |
| Subject: | Re: Title Shadow. |
----- Original Message -----
From: Steven <spi@sliders.demon.co.uk>
>
> Erm...what bug exactly. From the way you described your installation
> its no wonder you had problems. If you ran TitleShadows IMMEDIATELY
> after Setpatch, and before Env-Handler was started, the ENV: assign
> wouldn't exist, and so when TitleShadow goes to interrogate ENV: for
> its prefs, it wont be able to resolve the assign.
>
I ran TitleShadow right after Setpatch and Env-Handler much further down,
just before the system assigns! Even after removing Env-Handler the problem
of asking for 'Volume Env' to be inserted still persisted! All the ENV setup
commands and ENVARC copy commands where there but it still asked for 'Volume
ENV' to be inserted! Cancelling the requestor allowed workbench to boot but
TitleShadow was crap until saved. After reboot I was back to square one
again!
Removing TitleShadow cured the problem.
> By now moving Titleshadows to a position after Env-Handler has been
> run, that problem wont exist. You'd be better off running it in your
> User-Startup in all honesty, since thats what the User-Startup was
> designed for.
>
I've now placed TitleShadow as the last line of my user startup and put
Env-Handler back before the system assigns and all works well!
My opinion is that TitleShadow MUST be run in the user startup NOT in the
startup sequence after Setpatch as the documents suggest!
Richy
http://www.aminutz.org.uk
ICQ 18894975
mailto:richy@aminutz.org.uk
Quote carefully and read all ADMIN:README mails
To unsubscribe mailto:amigactive-unsubscribe@yahoogroups.com
Anyone sending unsubscribe messages to the list will be SHOT!
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/