| From: | Michael Habermann |
| Date: | 4 Aug 2001 at 19:25:51 |
| Subject: | [D5] Re: no workbench launching |
Hello,
Cannot launch a program from a button or a menu if it is specified as
"workbench". By setting "output to window" and a "close window button"
the following is displayed following an unsuccessful launch:
DirOpus Output Window
dopusrt5: unknown command
failed returncode 10
User startup reads:
assign DOpus5: Boot:Opus5
path DOpus5: C add
In the CLI I typed another path command to get dopusrt5 recognized. I
tested it out. I typed dopusrt5 and the program name and
it ran, but of course this is from the CLI, not DOpus.
All I remember about installing DOpus was that initially it ran on a
separate screen, and afterwards (when I decided I didn't need the two
screens) I ran the install option "Dopus as workbench replacement" and
that didn't do the trick until Dr. Perry told me to add those two lines to
the user startup.
Don't know much about programming but it seems to me that somehow dopusrt5
is not being found. I added different path commands to the system and
still cannot get it to work.
What is to be done?
Thanks,
Michael
---------------------------------------------------
Michael R. Habermann
email: mrh@charm.net