1
Connect one end of the (yellow) Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson Gateway:
 |
< |
Your computer must have a free Ethernet port. |
< |
Your computer must be configured to obtain an IP address automatically. This is the default setting. |
Proceed as follows:
1 |
Connect one end of the (yellow) Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson Gateway:
|
2 |
Connect the other end of the (yellow) Ethernet cable to your computer. |
3 |
Your computer is now connected to your network. No additional configuration is needed. |