MVR-D2000 enhanced properties setting utility                   Version 3.20
                                                                2000/4/7



1. About this utility
 This software allows you to display/configure multiple MVR-D2000 boards installed in your PC.
 This program supports Windows 98 / 98 Second Edition / Millennium Edition, Windows 2000 and Windows NT4.0.


2. Instructions
2-1. List Display
 (1) When the program opens, the list of boards that are currently installed in your system will show up.
    a. Bus, Device, Function
      The Bus number (0 - 255), Device number (0 - 31), Function number (0 - 7) will be displayed.
    b. Name
      The functional boards will have device names applied.
      The boards that are not functional will not have names.
      These name are different from the ones applied by the device manager in Win 98. 

2-2 Enhanced properties setting/display
 (1) Select the board on the list, and click the properties button to set the enhanced properties. 
    a. Name (same as the name applied in 2-1-(1)-b.
    b. Product name
    c. Capture, playback, monitor
         This shows the board functions
         This setting cannot be changed
    d. Convert AVI to MPEG 
         This setting has to be activated to support AVI to MPEG convert.
    e. Status
         This shows if the board can be used or not.
         If the board can not be used, the reason will be displayed.
 (2) To make the new settings active, you must restart windows.


3. Revision dates
------------------------------------
Version 1.00     Release: 2000/1/14
------------------------------------
First release.

------------------------------------
Version 2.00     Release: 2000/4/7
------------------------------------
Added power management in Windows 2000 (when the WDM driver is installed).
See WdmReadme.txt for details.


Copyright (c) 2000 Canopus Co., Ltd.  All rights reserved