101	------------------------------------------------------------------------
1111	Matrox Display Driver Setup
1112	Installation isn't complete. If you cancel the installation, your display software may not work properly.\n\nAre you sure you want to cancel the installation?
1113	< &Back
1114	&Next >
1115	Cancel
1116	&Finish
1119	Language selected:
1120	Devices selected:
1121	 (%d devices)
1122	Default quality and performance settings will be restored.
1123	Installation canceled. Your display software may not work properly. To install properly, run this setup program again.
1124	Installation failed. Try restarting your system before running the setup program again. Also, be sure to follow the installation procedure of your Matrox graphics card manual.
1125	This software doesn't detect any Matrox graphics hardware in your computer.\n\nMake sure your Matrox graphics hardware is properly installed.
1126	Listed below are devices this software has detected in your computer.
1127	Default PowerDesk settings will be restored.
1128	Unknown Matrox Device
1129	Extra DualHead Multi-Display support
1150	Installing...
1151	Done
1152	Failed
1153	Canceled
1155	1 analog computer monitor
1156	2 analog computer monitors
1157	3 analog computer monitors
1158	1 digital (flat panel) monitor
1159	2 digital (flat panel) monitors
1160	1 digital (flat panel) monitor and 1 analog computer monitor
1161	1 digital (flat panel) monitor and 2 analog computer monitors
1162	1 analog monitor and a TV
1163	1 digital (flat panel) monitor and a TV
1164	(1) Connect your HD15-to-DVI adapter to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your analog computer monitor to this adapter.
1165	(1) Connect your HD15-to-DVI adapter to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your preferred analog computer monitor to this adapter.
\n
\n(3) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(4) Connect your second analog computer monitor to connector "1" on this cable.
1166	(1) Connect your HD15-to-DVI adapter to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your preferred analog computer monitor to this adapter.
\n
\n(3) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(4) Connect your second analog computer monitor to connector "1" on this cable.
\n
\n(5) Connect your third analog computer monitor to connector "2" on this cable.
1167	(1) Connect your digital monitor directly to the main ("A") connector on your Matrox graphics card.
1168	(1) Connect your preferred digital monitor directly to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your second digital monitor directly to the secondary ("B") connector on your Matrox graphics card.
1169	(1) Connect your preferred monitor to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your second monitor to the secondary ("B") connector on your Matrox graphics card.
\n
\nNote: To connect your analog computer monitor, use your HD15-to-DVI adapter.)
1170	(1) Connect your digital monitor directly to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(3) Connect your first analog computer monitor to connector "1" on this cable.
\n
\n(4) Connect your second analog computer monitor to connector "2" on this cable.
1171	(1) Connect your HD15-to-DVI adapter to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your analog computer monitor to this adapter.
\n
\n(3) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(4) Connect your TV output adapter to connector "1" on your dual-monitor cable.
\n
\n(5) Connect your TV (or video recorder) to the composite video or S-video connector on your TV output adapter.
1172	(1) Connect your digital monitor directly to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(3) Connect your TV output adapter to connector "1" on your dual-monitor cable.
\n
\n(4) Connect your TV (or video recorder) to the composite video or S-video connector on your TV output adapter.
1173	Use only 1 display for your Windows desktop.
1174	Use 1 display for your Windows desktop and use your second display to view a copy of your first display.
1175	You can select a separate resolution, color palette, and relative virtual position for each display.
1176	Both displays use the same resolution and color palette.
1177	All 3 displays use the same resolution and color palette.
1178	For each display
1179	Display 1
1180	800 x 600
1181	1024 x 768
1182	1152 x 864
1183	1280 x 1024
1184	1600 x 1200
1185	Monitor setup:
1186	1 display
1187	2 displays, Clone mode
1188	2 displays, Independent mode
1189	2 displays, Stretched mode
1190	3 displays, Stretched mode
1191	Multi-display setup:
1192	Center dialog boxes and message boxes:
1193	Center on desktop
1194	Center in parent program window
1195	Center in mouse pointer display
1196	Center in parent program display
1197	Maximize windows:
1198	Across all displays
1199	In the display containing the window
1200	Display resolution:
1201	Resolution 1
1202	Resolution 2
1203	Font size (DPI):
1204	Normal (96 DPI)
1205	Large (120 DPI)
1206	This setup will continue normally, but PowerDesk features won't be available until Microsoft .NET Framework software is installed. To install this software now, make sure "Install Microsoft .NET Framework" is enabled.
1207	Separate resolutions and refresh rates are effectively unavailable while using 2 digital (flat panel) monitors at a time. However, while using 2 digital monitors at a time in "independent" mode, Windows still treats your displays as independent displays, and for each display you can still use separate color palette settings and separate virtual positions.\n\nWith 2 digital monitors, the display with the lowest maximum resolution always determines the maximum resolution of both your displays. If you select a lower Windows resolution for one of your displays, that display may use only a portion of the screen (the rest of the screen will be black). To avoid this, we recommend you select the highest Windows resolution available for your digital monitors.
1208	2 analog computer monitors and a TV
1209	1 digital (flat panel) monitor, 1 analog computer monitor, and a TV
1210	(1) Connect your HD15-to-DVI adapter to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your preferred analog computer monitor to this adapter.
\n
\n(3) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(4) Connect your second analog computer monitor to connector "2" on this cable.
\n
\n(5) Connect your TV output adapter to connector "1" on your dual-monitor cable.
\n
\n(6) Connect your TV (or video recorder) to the composite video or S-video connector on your TV output adapter.
1211	(1) Connect your digital monitor directly to the main ("A") connector on your Matrox graphics card.
\n
\n(2) Connect your dual-monitor cable to the secondary ("B") connector on your Matrox graphics card.
\n
\n(3) Connect your second analog computer monitor to connector "2" on your dual-monitor cable.
\n
\n(4) Connect your TV output adapter to connector "1" on your dual-monitor cable.
\n
\n(5) Connect your TV (or video recorder) to the composite video or S-video connector on your TV output adapter.
1212	While using 3 displays at a time, a TV can be used for full-screen PowerDesk-HF features (for example, PureVideo/DVDMax) but can't be part of the Windows desktop.
1213	Note
1501	Setup program for Matrox display driver and Matrox PowerDesk software --\n  Operating system: Windows %s; Date: %d-%02d-%02d; Time: %d:%02d
1502	Command-line and/or INI switches were recognized.
1503	No switches used.
1504	Installation summary
1505	Miscellaneous
1506	Matrox driver defaults restored.
1507	"[BOOTUP]" section -- switches added
1508	No switches added.
1509	"[REGISTRY]" section -- switches added
1510	"[TV_STANDARDS]" section -- switches added
1511	Specific display mode (%s x %s, %s-bit, %s dpi) applied.
1512	Matrox QuickDesk won't be started when Windows restarts.
1513	Matrox Diagnostic won't be started when Windows restarts.
1514	The following files were explicitly copied:
1515	At %d:%02d, the setup program finished without restarting the computer.
1516	At %d:%02d, the setup was cancelled by the user.
1517	At %d:%02d, the setup program restarted the computer.
1518	No files copied.
1519		Source path: %s\n	Destination path: %s
1520	The default destination path is "%s".
1523	Matrox PowerDesk defaults restored.