0	Create a chamfer a given distance from an intersection\nChamfer (Distance and Distance)\n\n
1	Create a chamfer defined by its distance and angle\nChamfer (Distance and Angle)\n\n
2	Create a chamfer defined by its length and angle\nChamfer (Length and Angle)\n\n
3	Extend two lines to a meeting point\nMeet 2 Lines\n\n
4	Extend line to a meeting point\nT Meet Double Lines\n\n
5	Clean meeting point\nX Meet Double Lines\n\n
6	Connect two lines with a smooth arc\nFillet\n\n
100	Process the whole multiline\nMultiline\n\n
101	Delete gaps in the chosen entity\nDelete Gaps\n\n
102	Cleanup intersection\nCleanup\n\n
103	Delete CutLines in the chosen entity\nDelete CutLines\n\n
300	\nDelete Gaps
301	\nDelete Cutline
302	\nMeet Lines
400	Key in Distance A and Distance B and click on the first line/double line
401	Key in the Distance and Angle and click on the first line/double line
402	Key in the Length and Angle and click on the first line/double line
403	Click on the second line/double line
404	Click on the second line/double line
405	Click on the second line/double line
406	Select the first entity
407	Select the second entity
898	A currently selected entity has lost connections to its dimensions. We recommend deleting these dimensions and re-doing them.
899	Failed because selection contains graphics which are read only.
900	Wrong option selection.
901	Chamfer is not possible in this case.
902	Wrong selection. Try to select the second segment again or use the local menu.
903	For this case, the modification requested is not possible.
904	Cannot fillet or chamfer 
these two segments of the same multiline.

Try to select the second segment again
   or use the local menu.
905	At least one of these two choosen segments 
of different multilines is not a start/end segment.

Try to select the second segment again
   or use the local menu.
906	At least one of these two multilines is closed.

Explode complex entities before trying to Fillet or Chamfer.
907	Cannot fillet or chamfer these two segments.

Try to select the second segment again
   or use the local menu.
908	Radius is too small for fillet.

Try again
   or use the local menu.
909	Cannot fillet these arcs.
910	These two segments belong to the same multiline so a Meet cannot be performed on them.
911	These two segments belong to the same multiline so a Meet cannot be performed on them.
912	These two segments belong to the same multiline so a Meet cannot be performed on them.
913	At least one of the two chosen segments 
of different multilines is not a start/end segment.
914	Cannot Meet these two segments.
915	Meet is not possible, try again!
916	Cannot X_Meet these two segments.
917	At least one of the two multilines is closed. Meet is not possible, try again!
3000	Modify\nChamfer\nDistanceDistance\n&Distance/Distance
3001	Modify\nChamfer\nDistanceAngle\nDistance/&Angle
3002	Modify\nChamfer\nLengthAngle\n&Length/Angle
3003	Modify\nMeet2Lines\n&Meet 2 Lines
3004	Modify\nTMeet2DoubleLines\nT-M&eet 2 Double Lines
3005	Modify\nIntersect2DoubleLines\nI&ntersect 2 Double Lines
3006	Modify\nFillet\nF&illet