# Tento subor treba premenovat na MYKERNEL s velkymi pismenami.
# Tato verzia je vsak pre starsi kernel (3.1+). Ak pracujete s FreeBSD 4.0, pouzite tento
# kernel
# Dat ho do adresara /usr/src/sys/i386/conf a spustit
# config /usr/src/sys/i386/conf/MYKERNEL Tymto sa v adresari
# /usr/src/sys/compile vytvori adresar MYKERNEL, v ktorom treba zadat
# make depend a potom make. Po kompilacii treba este zadat make install.
# Takto ziskate novy kernel.
# TENTO SUBOR VYTVORI KERNEL S PODPOROU SOUND BLASTER, ATAPI/PARALLEL PORT ZIP DRIVE,
# PRISTUP NA EXT2 A PLNO DALSICH VECI, KTORE NIE SU V INSTALACNOM KERNELI
# JEDNOTLIVE FUNCKIE SOM PRELOZIL DO SLOVENCINY. POZOR, MAM PENTIUM, pre
# AMD asi bude vhodne este dopisat nejake funkcie. Zakomentovanie #
# zablokuje, ide iba o poznamku.
# Kernel Configuration Files: http://www.freebsd.org/handbook/kernelconfig-config.html
machine "i386" #architektura, teda PC kompatibilny
#cpu "I386_CPU" #typy procesorov.
cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident MYKERNEL #nazov
maxusers 32 #max. pocet uzivatelov
options MATH_EMULATE #Podpora pre x87 emulaciu
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options NTFS
options MSDOSFS #MSDOS Filesystem
options "EXT2FS" #linux ext2 suborovy system
options "IBCS2" #Podpora pre ine unixovske binarne subory
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options USER_LDT
options "VM86"
options "CPU_SUSP_HLT"
options "CPU_FASTER_5X86_FPU"
options "MD5"
options VESA
config kernel root on wd0
# To make an SMP kernel, the next two are needed
# SMP je podpora pre viacero procesorov
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
controller isa0
controller pnp0 # PnP podpora for ISA
controller eisa0
controller pci0
# Floppy drives
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
# IDE controller and disks
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
# ATAPI devices
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device acd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller ncr0 # NCR/Symbios Logic
controller ahb0 # EISA AHA1742 family
controller ahc0 # AHA2940 and onboard AIC7xxx devices
controller amd0 # AMD 53C974 (Teckram DC-390(T))
controller isp0 # Qlogic family
controller dpt0 # DPT Smartcache - See LINT for options!
controller adv0 at isa? port ? cam irq ?
controller adw0
controller bt0 at isa? port ? cam irq ?
controller aha0 at isa? port ? cam irq ?
# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device sa0 # Sequential Access (tape etc)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI)
device ch0 # scsi media changers
controller scbus1
device da1
device pass1
device sa1
device pt0 at scbus? #scsi processor type
device sctarg0 at scbus? #scsi target
device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0
device pca0 at isa? port "IO_TIMER1" tty
# Proprietary or custom CD-ROM Interfaces
#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10
#device matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# atkbdc0 controls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
#device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at isa? port IO_NPX irq 13
# Power management support - podpora APM (see LINT for more options)
device apm0 at isa? disable flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at card?
#device pcic1 at card?
# Serial (COM) ports
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device sio2 at isa? disable port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0 # Parallel port bus (required)
device lpt0 at ppbus? # printer
device plip0 at ppbus? # TCP/IP over parallel
device ppi0 at ppbus? # Parallel port interface device
controller vpo0 at ppbus? # ZIP DISK, potrebne su scbus and da0
device ppc1 at isa? port? tty
controller ppbus1
device lpt1 at ppbus?
device plip1 at ppbus?
device ppi1 at ppbus?
controller vpo1 at ppbus? # ZIP DISK (ak mate druhy paral. port
# PCI Ethernet NICs.
device al0 # ADMtek AL981 (``Comet'')
device ax0 # ASIX AX88140A
device de0 # DEC/Intel DC21x4x (``Tulip'')
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
device mx0 # Macronix 98713/98715/98725 (``PMAC'')
device pn0 # Lite-On 82c168/82c169 (``PNIC'')
device rl0 # RealTek 8129/8139
device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'')
device tl0 # Texas Instruments ThunderLAN
device tx0 # SMC 9432TX (83c170 ``EPIC'')
device vr0 # VIA Rhine, Rhine II
device vx0 # 3Com 3c590, 3c595 (``Vortex'')
device wb0 # Winbond W89C840F
device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
device ep0 at isa? port 0x300 net irq 10
device ex0 at isa? port? net irq?
device fe0 at isa? port 0x300 net irq ?
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 net irq 10 drq 0
device cs0 at isa? port 0x300 net irq ?
# requires PCCARD (PCMCIA) support to be activated
#device xe0 at isa? port? net irq ?
# PCCARD NIC drivers.
# ze and zp take over the pcic and cannot coexist with generic pccard
# support, nor the ed and ep drivers they replace.
device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun 1 # Packet tunnel
pseudo-device pty 16 # Pseudo-ttys (telnet etc)
pseudo-device gzip # Exec gzipped a.out's
pseudo-device vn # driver na pseudo filesystem
pseudo-device speaker
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
pseudo-device bpfilter 1 #Berkeley packet filter