.topic 10024
Click here for Version and
Registration information

.topic 10017
Click here to locate you script file

.topic 10010
Turns on/off marking spots to be removed
with red color and moving spots with blue.
Also, cells with high motion are highlighted.

.topic 10001
Adjusts brightness, contrast, or saturation.
Processing speed is not affected.
The "contrast" slider adjust intensity contrast
while "saturation" means color contrast.

.topic 10002
Adjusts color shifts.
See main Help for details.

.topic 10019
Set it negative to reduce the strength
of smoothing for color components.

.topic 10011
Maximal horizontal shift for a spot
to be identified as a moving object.
Set it higher for high motion in cartoons.
Lower number will remove more spots.
Measured as percentage of frame size.

.topic 10012
Maximal vertical shift for a spot
to be identified as a moving object.
Set it higher for high motion in cartoons.
Lower number will remove more spots.
Measured as percentage of frame size.

.topic 10004
You won't regret clicking
on this useful button!

.topic 10020
A higher number will smooth more noise.
Affects both intensity and color components.
Set to 9 or higher for VHS source.

.topic 10005
Width of the smoothing kernel in time.
Higher number will smooth more accurately
but takes more time. Has almost no effect
on the strength of smoothing.

.topic 10006
Minimal difference between intensity in
the spot and a pixel on the perimeter for
the latter to fulfil the perimeter clearance.
Set it lower for easier spot detection.

.topic 10008
Maximal level of color variation that
allows color components to become locked.
Zero will disable color locking.

.topic 10009
Maximal level of intensity variation that
allows pixel intensity to become locked.
Zero will disable intensity locking.

.topic 10023
Turns on/off highlighting of locked pixels
for debugging purposes.

.topic 10007
Level of intensity jump for a pixel
to be identified as a pixel in spot.
Set it smaller for easier spot detection.

.topic 10013
Intensity threshold for a cell to
become flagged as a cell with motion,
suppressing the spot removal.
Set it higher to decrease motion
sensitivity and remove more spots.

.topic 10014
Ratio of "bad" pixels in the perimeter.
Set it higher for easier spot detection.
Zero will require absolute perimeter
clearance, without "bad" pixels.

.topic 10015
When using "Preview", remember about
the large time lag. (See main Help for details)

.topic 10016
Click on this button to restore the
default values for all parameters.

.topic 10018
Type in the name of your
script file with full path here.
Leave empty if not used.

.topic 10003
Larger number will require thick round spots.
Set it smaller to remove scratches, hairs etc.
Should be over 20 when processing cartoons.

.topic 10021
Amount of columns in the motion table.
Can range from 1 to 24

.topic 10022
Amount of rows in the motion table.
Can range from 1 to 18.