3	File output name missing.\n
4	Too many file output parameters\n
5	Too many redirect to file parameters\n
6	Incorrect syntax\n
7	Unrecognized command %s\n
8	Can scan one Domain, Computer or an IP Address/Range at a time\n
9	Can not combine report and scan options together\n
10	Two many parameters, expecting one. If you are using spaces in the parameter, \nexclose the parameter in double quotes.\n
11	Scan target parameter missing\n
12	Too many parameters passed\n
14	Can pick one report option at a time\n
15	Report file name missing.\n
16	%s is not a valid IP address\n
17	%s is not a valid IP address range format. Must be <IP address>-<IP address> (no spaces).\n
18	%s is not a valid IP address range\n
19	Can not get the Local Machine name due to an error: %d
20	Output filename must contain %C% if you attempt to scan more then one computer
21	No checks selected. Can not scan.
22	-baseline is not allowed when -sus is specified
29	Help cannot be loaded. Check your installation.
30	Invalid command - %s\n
31	An instance of the %s is already running
32	No scan selection indicated.
33	%s. Scan did not complete\n
34	Exception during the scan. Scan did not complete\n
35	Can not open the file for redirection
36	Unable to get XML errors data.\n
37	Exception. Can not get the list of errors\n
38	%s. Can not get the list of errors.\n
39	GetReportList failed.
40	No reports available from latest scan\n
41	No reports available\n
42	GetUserXML failed.\n
43	Out of memory, cannot scan\n
45	Version 1.2 (%s)\n
46	HFNetChk developed for Microsoft Corporation by Shavlik Technologies, LLC.
47	Configured to send results to server %s\n\n
48	No parameters allowed for this command\n
49	All rights reserved.
50	Invalid parameter count for command %s\n
51	Error: Failure when processing file input.  Continuing without the data in one or more files.
52	Error: ** -history and -b cannot be used together.  No scan done **
53	Invalid output format (%s).  Exiting application\n
54	\n\n ** E-Mail output not yet implemented ** \n\n
55	\n\n ** Event log writing not yet implemented ** \n\n
56	Error: SUS file not found or invalid format. Valid entries are a URL of the\nSUS server or the file path to an approveditems.txt file.
57	Error:  Both Username and Password must be set if using the -u or -p option.  Scan not run.
58	Error:  Unable to get the sus file approveditems.txt from:\nURL **%s**.
59	Error:  No SUS file passed in and not in the registry.
60	Using log file hf.log in current working directory.\n
61	\nPlease use the -v switch to view details for\nPatch NOT Found, Warning and Note messages\n
64	Error:  It was determined that there are no machines to scan.  No scan was done.
65	Error: Error in resolving machines to scan.  No scan was done.
66	Can not create a Scan object\n
67	Cannot create MSXML object.\nMake sure the latest version of MSXML is correctly installed.\n
68	Unable to load XML data.\n
69	Can not load XSL file.\n
70	Unable to apply XSL to XML.\n
72	MBSACLI [/c|/i|/r|/d domain] [/n option] [/o file] [/f file] [/qp] [/qe] [/qr]\n\nMBSACLI [/e] [/l] [/ls] [/lr file] [/ld file] [/unicode] [/hf] [/?]\n\nDescription:\n    This is a command line interface for Microsoft Baseline Security Analyzer\n\nParameter List:\n
73	    /c     domain\computer   Scan named computer.\n\n    /i     IP                Scan named IP address.\n\n    /r     IP-IP             Scan named IP addresses range.\n\n
74	    /d     domain            Scan named domain.\n\n    /n     option            Select which scans to NOT perform.\n                             All checks are performed by default.\n                             Valid values:\n                             "OS", "SQL", "IIS", "Updates", "Password",\n                             Can be concatenated with "+" (no spaces).\n\n
75	    /o     filename          Output XML file name template.\n                             Default: %D% - %C% (%T%).\n\n    /f     filename          Redirect output to a file.\n\n    /qp                      Don't display scan progress.\n\n
76	    /qe                      Don't display error list.\n\n    /qr                      Don't display report list.\n\n    /q                       Do not display any of the preceding items\n\n    /s 1                     Suppress security update check notes.\n\n    /s 2                     Suppress security update check notes and warnings.\n\n    /nvc                     Do not check for a new version of MBSA.\n\n
77	    /baseline                Check only for baseline security updates.\n\n    /nosum                   Security update checks will not test\n                             file checksums.\n\n    /sus    [susserver | susfilename]  Specify the URL of the SUS server or the\n                             file path to the approveditems.txt file. If a URL\n                             or path is not specified, then the value stored in\n                             the registry will be used if available.\n\n    /e                       List errors from the latest scan.\n\n    /l                       List all reports available.\n\n
78	    /ls                      List reports from the latest scan.\n\n    /lr     filename         Display overview report.\n\n    /ld     filename         Display detailed report.\n\n    /v                       Display security update reason codes.\n\n    /unicode                 Output Unicode.\n\n    /hf                      Run in HFNetChk mode.\n                             Run with /hf -? for hfnetchk help\n                             The /hf must be the first command line parameter.\n\n
79	    /?                       Display this help/usage.\n\nExecuting MBSACLI with no parameters scans the local computer.\n\nExamples:\n    MBSACLI\n    MBSACLI /n Password\n    MBSACLI /c MyDomain\MyComputer /n Password+Updates+SQL\n    MBSACLI /d MyDomain\n    MBSACLI /i 200.0.0.1\n    MBSACLI /r "200.0.0.1-200.0.0.50"\n    MBSACLI /l\n    MBSACLI /ld "Domain - Computer (03-01-2002 12-00 AM)"\n    MBSACLI /f "C:\results.txt"\n    MBSACLI /sus "http://corp_sus"\n    MBSACLI /hf  -?\n\nThe MBSA V1.2 graphical interface default parameters are:\n    For scans:   /nosum /baseline\n    For reports: /v\n
85	mbsacli /hf  [-h hostname] [-i ipaddress] [-d domainname] [-n]\n             [-r range] [-history level] [-t threads] [-b] [-sus]\n             [-o output] [-x datasource] [-z] [-v] [-s suppression]\n             [-nosum] [-sum] [-u username] [-p password] [-f outfile]\n             [-fh Hostfile] [-fip ipfile] [-about] [-fq Ignorefile]\n             [-unicode]\n\n
86	Description:\n	The MBSACLI tool assesses a machine or group of machines for security\n	hotfixes that have either been installed and/or need to be installed.\n	For more information on this tool, please refer to Microsoft Knowledge\n	Base Article 303215.\n\nParameter List:\n\n
87		-about			About mbsacli.\n\n	-h	hostname	Specifies the NetBIOS machine name to scan.\n				Default is the localhost.\n\n	-fh	hostfile	Specifies the name of a file containing\n				NetBIOS machine names to scan.  One name per\n				line, 256 max per file.\n\n	-i	ipaddress	Specifies the IP address of a machine to scan.\n\n	-fip	ipfile		Specifies the name of a file containing\n				addresses to scan. One IP address per\n				line, 256 max per file.\n\n
88		-fq	ignorefile	Specifies the name of a file containing\n				Q numbers to ignore.  One Q number per line.\n\n	-r	range		Specifies the IP address range to be scanned,\n				starting with ipaddress1 and ending with\n				ipaddress2 inclusive.  <ipaddress1-ipaddress2>\n\n	-d	domainname	Specifies the domain name to scan.  All\n				machines in the domain will be scanned.\n\n	-n			All systems on the local network will be\n				scanned.  (i.e., all hosts in Network\n				Neighborhood)\n\n
89		-history level		Displays hotfixes that are:\n				(1) explicitly installed\n				(2) explicitly not installed\n				(3) effectively installed\n				This switch is not necessary for normal\n				operation. Do not use this switch unless you've\n				read -history usage in 303215.\n\n	-t	threads		Number of threads used for executing scan.\n				Possible values are from 1 to 128. Default is 64\n\n	-o 	output		Specifies the desired output format.\n				(tab) outputs in tab delimited format.\n				(wrap) outputs in a word wrapped format.\n				Default is wrap.\n\n
90		-x	datasource	Specifies the xml datasource containing the\n				hotfix information.  Location may be an xml\n				filename, compressed xml cab file, or URL.\n				Default is mssecure.cab from the Microsoft\n				website.\n\n	-s	suppression	Suppresses NOTE and WARNING messages\n				1 =  Suppress NOTE messages only\n				2 =  Suppress both NOTE and WARNING messages\n				Default is to show all messages\n\n	-nvc			Do not check for new version of MBSA.\n\n	-z			Do not perform registry checks. (Note when this\n				switch is used with -history, registry checks\n				will still be performed for those patches that\n				only have registry key data and no file version\n				information in the mssecure.xml file)\n\n	-nosum			Do not evaluate file checksum.\n				The checksum test calculates the checksum of\n				files.  This can use up large amounts of\n				bandwidth.  Using this option will speed up a\n				scan and use less bandwidth.  File version\n				checks will be still done.\n\n
91		-b			Display the status of hotfixes required to\n				meet minimum baseline security standards.\n				This scans for updates marked as critical\n				security updates in Windows Update.\n\n	-v			Displays the details for Patch NOT Found,\n				WARNING and NOTE messages.  Enabled by default\n				in tab mode.\n\n	-f 	outfile		Specifies name of the file to save the results.\n				Default is to display to screen.\n\n	-u	username	Specifies optional user name for login\n				to remote computer.\n\n	-p	password	Specifies password to be used with user name.\n\n
92		-sus	[susserver | susfilename]  Specify the URL of the SUS server or\n				the file path to the approveditems.txt file. If\n				a URL or path is not specified, then the value\n				stored in the registry will be used if\n				available.\n\n	-sum			Perform file checksum tests.\n				Force checksum tests to be run on non-English\n				language systems. Use only if you have a custom\n				XML file with language-specific checksums.\n\n	-unicode		Output Unicode.\n\n	-?			Displays this menu.\n\n
93	Examples:\n	 mbsacli -hf\n	 mbsacli -hf -v -z -b\n	 mbsacli -hf -h hostname\n	 mbsacli -hf -o tab\n	 mbsacli -hf -sus\n	 mbsacli -hf /sus "http://corp_sus"\n	 mbsacli -hf -h hostname -f out.txt\n	 mbsacli -hf -d domainname -u domainname\username -p password\n	 mbsacli -hf -d domainname -u username -p password\n	 mbsacli -hf -h h1,h2,h3\n	 mbsacli -hf -i 192.168.1.1 -s 2 -t 10 -v\n	 mbsacli -hf -i 192.168.1.1,192.168.1.8 -h hostname -x mssecure.xml \n	 mbsacli -hf -d domainname -s 1 -o tab -x c:\temp\mssecure.xml\n	 mbsacli -hf -r 192.168.1.1-192.168.1.254 -history 1 -t 20 \n	 mbsacli -hf -x http://www.xyz.abc/mssecure.xml\n	 mbsacli -hf -x "c:\Space In Path\mssecure.xml"\n	 mbsacli -hf -fh d:\MyHostFile.txt\n	 mbsacli -hf -fip d:\MyIPFile.txt\n	 mbsacli -hf -v -z -b\n	 mbsacli -hf -about\n\n
101	\nError: Failed to initialize unicode output library.\n
103	\nA new version of MBSA is available!\nPlease visit the MBSA homepage to download the latest version at:\n%s\n\n
104	\nThis version of Microsoft Baseline Security Analyzer has expired.\nPlease upgrade to the released version.\n\nMicrosoft Baseline Security Analyzer updates are available at:\n	http://go.microsoft.com/fwlink/?LinkId=16534\n
105	Error:  Number of threads used for executing a scan must be between 1 and 128. Default is 64.
106	Checks to exclude from scan are missing.
107	Invalid check name: %s
108	Error: ** -history - Invalid parameter.  Only 1 2 or 3 are allowed **
110	Invalid parameter: %s %s
111	Option %s requires a parameter\n
500	Scanning
501	Done scanning
502	----------------------------
503	SP1
507	LoadDocumentSync - Caught exception
509	LoadDocumentSync Failed - m_pIXMLDOMDocument is 0
514	Name
541	Issue
542	Summary
555	No Error
556	WNetGetLastError Error %d seeking text for %d
557	Provider %s Error %d (%s)
558	No verision info
559	Out of memory, cannot scan
560	Error:
561	Error: Not able to open shavlikscanerrors.htm
562	Using %d as TC
563	Adding to Ignore list -  %s
564	Adding to list -  %s
565	%s failed with code %ld;
566	Error: Unable to find domain:
567	Adding computer %s
568	Add %s from workgroup %s
570	In Resolve Domain exit 1 - Netapi32.dll not found.  domain resolution stopped, domain %s.
571	Netapi32.dll not found.  domain resolution stopped, domain %s
572	Attempting to enumerate machines for domain:
573	%s, enumeration stopped, domain %s
574	Domain resolution determined the number of computers on domain %s is %d
575	Error: Unable to enumerate machine accounts from domain controller for domain %s.  Please ensure that you have administrative rights to the domain controllers for this domain.
576	TotalEntries = 0 - No machines enumerated
577	Getting machine list %s
578	Error: ExpandWorkgroup for domain %s failed
579	Calling ExpandWorkgroup.
580	getdc  Status %d,  domain %s
581	NetGetAnyDCName  Status %d,  domain %s
582	DsGetDcName failed for domain %s, Error %s
583	In Resolve Domain exit 2.
584	GetLastError %s, ERROR_ACCESS_DENIED - domain resolution stopped, domain %s
585	Error: GetLastError %s
586	nStatus %s, domain resolution stopped, domain %s
587	Error: domain %s
588	Error: DsGetDcName - ERROR_ACCESS_DENIED - nStatus %s, domain resolution stopped
589	DsGetDcName is not found in Netapi32.dll. Code requires SP6a and DS Client.
590	Internal error - CS::AddToThreadList
591	Error:  Scan not performed on machine: %s - The selected output format has a limit of 256 possible machines to scan.
592	Scan not performed on machine: %s - Over the limit for the selected output format
594	No machines added for domain:
595	Error in resolving domain:
596	Machine-->%s
597	Resolving machines to scan
598	SUS Error - NO COMMA on line -   %s
599	SUS Error (Invalid value) on line -   %s
601	Using the following (%d) SUS Approved Patches
602	Last Line - no CR   SUS Data --->   %s
603	SUS Data --->   %s
604	Error:  Not able to open file
605	CSettings::AddFromFile *%s* Opened FAILED
606	Error:  Only the 1st 256 entries from file %s were used.
607	256 is the limit on the number of entries from a file.
608	Started by Classic
609	Started by Enterprise
611	Please refer to 306460 for a detailed explanation.
612	SScanning started at %s
613	Is Windows 2000 or greater.
614	Testing if NT version 4
615	Leaving function StartScan
616	Machine Name	Product	Bulletin	Title	Q Numbers	FAQ URL	Reason	Description	Status
617	Machine Name, Product, Bulletin, Title, Q Numbers, FAQ URL, Reason, Description, Status
618	Machine Name	Product	Bulletin	Q Number	Reason	Status
619	Machine Name, Product, Bulletin, Q Number, Reason, Status
620	Error:  Error in DB Setup.  Error is:  %s
621	Scanning machine is windows 2000 or later
622	Scanning machine is NT 4
623	Evaluating systems against baseline security standards.
624	Read SUS mappings.  The number of mappings is - %d
625	Failed to load default XML
626	Failed to load XML %s
627	Results added **
628	Adding result - Error - Reason = %s
629	Error: Scanning %s - SystemRoot share access required to scan
630	Error: %s:  SystemRoot share access required to scan
631	Error: 301 - SystemRoot share access required to scan.
632	Error: Scanning %s - Registry access.  Reason UnKnown
633	Error: 503 - Scan not performed.  Error reading Registry.
634	Registry access not available.  Part 2 - %s
635	Registry access not available.  Part 1 - %d
636	Error: 502 - Scan not performed.  Error reading Registry.
637	Registry - Machine not be found - probably because remote registry service is off
638	Error: 553 - Unable to read registry.  Please ensure that the remote registry service is running.  Scan not performed.
639	Registry - Access Denied
640	Error: 501 - Remote registry access denied.  Scan not performed.
641	Error: 451 - Admin rights are required to scan.  Scan not performed.
642	Error: Scanning %s - Full Admin rights do not exist.
643	Error: 621 - Machine is not running Windows Server 2003, Windows XP, Windows 2000, or Windows NT 4.0.  Scan not performed.
644	Error: Scanning %s - Not a Windows NT type platform.
645	Error: 623 - Machine service pack is not supported.  Scan not performed.
646	Error: Scanning %s - Not a valid SP.
647	Error: 622 - Machine OS is not supported. Scan not performed.
648	Error: Scanning %s - Unrecognized OS.
649	MachineScan.ScanAllowed is TRUE
650	There is not Admin share access.
651	Testing for admin share access.
652	Machine is not running Windows Server 2003, Windows XP, Windows 2000, or Windows NT 4.0.
653	Registry access not available.  Error = %d
654	Setting machine name to %s
655	ScanAMachine - strMachinename -  **%s**, strIP - **%s**.
656	GetIP() returned - %s
657	In GetIP() 5 - error = %d
658	In ScanAllowed SPVer = %d
659	ScanAllowed = %d
660	GetServicePack fails with %d.  Reg.Open of SYSTEM\CurrentControlSet\Control\Windows failed.
662	Installed
666	GetBaseOS() = ??? (NOT NT OR 2K OR XP
667	Reg.Query(CSDVersion) -  GetServicePack fails with %d
678	Enterprise
679	Terminal Server
691	GFV == 0.  NOT able to determine so assume false
692	Internal error - SetMachineBeingScannedChecksumRules
693	This is NOT US English
694	This is US English
695	This is US English BUT more than 1 language versioned.
696	*****			GetFileVersionInfoSize returned eror = %d     *****
697	Error:  Error description -2:  %s.
698	Error:  Error description -1:  %s.
699	Error:  Specific message for this is:  %s.
700	Error:  Unable to determine the OS language.  Checksum tests will not be done unless the -sum command is used. 
701	Error:  Unable to determine the OS language.  Checksum tests will not be done unless the -sum command is used. This is probably due to the share not being available.
702	FAILED IN TESTACESS for NTDLL.  Error description -2:  %s
703	FAILED IN TESTACESS for NTDLL.  Error description -1:  %s
704	Looking for file **%s**.
705	LatestOSSP():  Failed to get OS m_CurrentServicePackID info from the xml
706	LatestOSSP():  Read from the xml
707	LatestOSSP():  Failed to Read product from the xml
709	No Information
713	SP Unknown
723	Unable to read Exchange Bulletin information from XML \n in the XML file.
724	There are no security updates for
725	Unable to read ServicePack information from XML for
726	TestIE ServicePack.Read failed for product %s.
728	TestExchange  product.Read failed: Error is: %s\n information not available from XML
738	***		WMP Version test.  File %s not found or is not accessible.  GetLasterror returned %d.  File handle was NULL or INVALID_HANDLE.  Unable to test for WMP
739	***		WMP Version test.  File %s not found or is not accessible.  GetLasterror returned %d.  File handle was NULL or INVALID_HANDLE.  Checking for V 6.4
740	SQL Server and/or MSDE Version = %s
743	SQL Server and/or MSDE Version (2) = %s
744	SQL Server and/or MSDE
747	Unable to read SQL Server and/or MSDE Bulletin information from XML
748	Unable to read SQL Server and/or MSDE information from XML
749	Warning
750	Informational
751	PatchFound
752	MissingPatch
753	Note
758	Error: Save scan result failed.  Reason:  %s
759	COutput::OutputResult default
762	No SQL Server and/or MSDE Found  %s
763	Key Open failed getting SQL Server and/or MSDE path
764	Key Opened, getting SQL Server and/or MSDE path (3)
765	Default Instance Found - no Installed Instances
766	NO NAMED INSTANCES InstalledInstances not found
767	Key Opened, getting SQL Server and/or MSDE path (2)
768	Named Instance - Trying to open key %s
769	Key Opened, getting SQL Server and/or MSDE (1)
770	Default Instance Trying to open RK
771	InstalledInstances
772	Microsoft SQL Server and/or MSDE Server exists
773	Trying for Getting named instances
774	Error: %X
775	Unknown Error!
776	The RecordSet is NULL
777	SetupIPRules failed - 3:  Error is = **-->%s<--**
778	SetupIPRules failed - 2:  Error is = **-->%s<--**
784	SetupIPRules failed - 1:  Error is = **-->%s<--**
788	SetupIPReasons failed - 1:  Error is = **-->%s<--**
790	SetupScanItems failed - 1:  Error is = **-->%s<--**
794	SetupProducts failed - 1:  Error is = **-->%s<--**
799	SetupIPaches failed - 1:  Error is = **-->%s<--**
801		*************		SaveScanResult Error exit 2.  m_strError = -->%s<--**
802		*************		SaveScanResult Error exit 1.  m_strError = -->%s<--**
811	Failed to add a Reason - ReasonID  m_strError = **-->%s<--**
813	Adding MachineID --- Name = %s, IP = %s
814	In function Verify
815	Cab (%s) file was not found.
816	Cab (%s) file was not able to be read (Possible read permissions) .
817	Cab (%s) file was not signed or the user said don't accept.
818	XML will not extract from %s.
819	System error getting machine information.
820	Error: System error getting machine information.
821	Machine not found.
822	Error: Machine not found.
823	Error: MBSA is unable to scan this machine.  Please check to see that you have administrative rights to this machine and are able to login to this machine from your workstation.
824	Error: Scan not performed.  Error reading Registry.
825	Service pack registry key could not be found
826	Error: Service pack registry key could not be found.
827	Remote registry access denied
828	Error: Remote registry access denied.
829	NOT an Admin
830	Error: Administrator rights are required to scan.
831	Scan NOT Allowed
832	Done Scanning for Latest Available SP
833	Scanning OS Service Pck
834	Done Scanning OS
835	Scanning OS
836	Done Scanning IIS
837	Scanning IIS
838	Done Scanning SQL Server and/or MSDE
839	Testing SQL Server and/or MSDE instance =
840	Scanning SQL Server and/or MSDE
841	Done Scanning Exchange
842	Scanning Exchange
843	Done Scanning WMP
844	Scanning WMP
845	Done Scanning IE
846	Scanning IE
847	GetWkstaInfo - NWGI Error is:
848	GetWkstaInfo:  NWGI :  Error is:
849	Tried the DSN name.  Now trying IP
850	Started at
851	GetServerInfo:  NSGI - Error is:
852	GetServerInfo:  NSGI:  Error is:
853	NSGI completed at
854	IP
855	Registry access not available.  Error =
856	GetServicePack fails with
857	Reg.Open of SYSTEM\CurrentControlSet\Control\Windows failed.
871	Services
872	Unable to perform test.  Uable to determine if the file exists. The test was not completed.  Error # is
873	File handle for
874	was NULL
875	GetLasterror returned
876	File Access Error for file
877	error Number =
878	detail -
879	Error: File Access Error.  Details:
880	Error: File Access Error for file:
881	Details:
882	Unable to access file
883	Please see 305385 for more information.
884	Unable to validate patch status.  MBSA was not able to access file
885	Please see 305385 for more information.  The specific error number is:
886	Unable to find file
887	Filename in test access is empty
888	TestSystemRootAccess - Failed.  Error =
889	IS BEING SUSSED
890	Comparing Patch to Patch
891	Comparing SUSpatch to Approved SUSPatch
892	Testing for IsBeingSUSSED
893	GetFileVersionInfoSize returned eror =
894	Error:  Error description -2:
895	Error:  Error description -1:
896	Error:  Specific message for this is:
897	FAILED IN TESTACESS for NTDLL.  Error description -2:
898	FAILED IN TESTACESS for NTDLL.  Error description -1:
899	Outlook
900	There are no security updates related to this product in the XML database.
901	The latest Service Pack for this application has not been installed.  Please install the latest service pack before evaluating this system against baseline security standards.
902	The latest service pack for this product is not installed.
903	Currently
904	is installed.
905	The latest service pack is
906	No information for this products Current Service Pack ID is available in the Hotfix Database
907	There is no information about this product's minimum supported service pack level in the XML file.
908	There is no information about this product's service pack level in \n	the XML database
909	There are no security updates for this product in the XML file.
911	Internet Information Services
912	All necessary hotfixes have been applied.
913	No hotfixes are missing or installed.
914	No hotfixes are installed.
915	All baseline security hotfixes have been applied.
916	No baseline hotfixes are missing or installed
917	No baseline hotfixes are installed
918	FAILED IN TESTACESS.  Error description:
919	Unable to read IIS Bulletin information from XML
920	Unable to read Current Service Pack ID from XML
921	Unable to read Minimum Supported Service Pack ID from XML
922	Unable to read IIS information from XML
923	Unable to read Exchange Bulletin information from XML
924	in the XML file.
925	TestIE ServicePack.Read failed for product
926	TestExchange  product.Read failed: Error is:
927	information not available from XML
928	Unable to read WMP Bulletin information from XML
929	TestWMP ServicePack.Read failed for product
930	Unable to read WMP information from XML
931	Unable to read IE Bulletin information from XML
934	SQL Server and/or MSDE Version =
935	SQL Server and/or MSDE Version (2) =
936	GetSQLServicePack - SQL Server and/or MSDE Service Pack is
937	Note	
938	Information
939	Error: Save scan result failed.  Reason:
940	No registry entries for this test.
941	No SQL Server and/or MSDE found
942	SUS Error - NO COMMA on line -
943	SUS Error (Invalid value) on line -
944	SUS PATCHNAME =
945	Using the following
946	SUS Approved Patches
947	Last Line - no CR
948	SUS Data --->
977	Using XML data version =
978	Last modified on
979	Scan performed
980	===============================================================
981	Cab
982	file was not found.
983	file was not able to be read (Possible read permissions) .
984	file was not signed or the user said don't accept.
985	XML will not extract from
986	Extraction of XML from CAB failed
987	Download of CAB failed
988	XML successfully loaded.
989	Error: All attempts to load xml failed.
990	No Hotfix XML Loaded.  All attempts to load xml failed
991	Error: Failed to load xml from local CAB
992	Attempting to load local XML
993	Attempting to load XML from local CAB
994	Error: Failed to load default xml
995	Attempting to load XML from
996	Error: Failed to load xml from default CAB
997	Attempting to load default XML
998	Failed to load default CAB
999	Attempting to get CAB from
1000	Attempting to load default CAB
1001	Opening regkey
1002	The returned error is:
1003	The results for this machine may not be reliable
1004	this machine
1005	********************RegOpen for key
1006	failed.  Setroot
1007	ERROR: RegConnect for Machine
1008	with a root of
1009	returned error
1010	Querying regkey
1011	KEY is not SZ either
1012	cannot be located.
1013	has an invalid checksum.
1014	greater than what is expected
1015	has an invalid checksum and its file version
1016	is equal to what is expected
1017	that is less than what is expected
1018	has a file version
1019	that is greater than what is expected
1020	File
1021	should be deleted.
1022	Invalid checksum for file
1023	Access denied to file:
1024	There are no security updates available for this product.
1025	File version is greater than expected.
1026	File version is less than expected.
1027	Patch NOT Found
1028	Patch Found
1029	Machine Name	Product	Bulletin	Q Number	Reason	Status
1030	Attempting to load from local CAB
1031	Attempting to load
1032	Error: Failed to load
1033	Error: Failed to load default CAB
1034	Error: 235 - System not found, or NetBIOS ports may be firewalled.  \n	Scan not performed.
1035	A required registry key does not exist.  It is necessary in order \n	for this patch to be considered installed.
1036	This product is no longer supported by Microsoft. The latest version\n	of MSXML should be installed.
1037	Error: Unable to load the XML file from the following location - 
1038	Error:  Scan not performed on machine: 
1039	 - The limit is 50 machines at one time for the selected output format.
1040	Error: 200 - System not found.  Scan not performed.
1041	*Error*
1042	Error: 201 - System not found.  The requested address is not valid.
1043	A required registry key does not exist.  It is necessary in order for this patch to be considered installed.
1044	The latest Service Pack for this application has not been installed.\n	Please install the latest service pack before evaluating this system\n	against baseline security standards.
1045	Reason:
1046	Port
1047	Ports
1048	System not found.
1049	The latest service pack\n	is
1050	The latest service \n	pack is
1051	INTERNET INFORMATION SERVICES
1052	Error: 801 - No XML was loaded for the language of the machine.
1053	 
1054	A registry key has the wrong value.
1055	Error: 553 - Unable to read registry.  Please ensure that the remote\n	registry service is running.  Scan not performed.
1056	Error: 261 - System found but it is not listening on NetBIOS ports.\n	Scan not performed.