20102	WinFax User's Pager
24576	IDI_TAPI
24577	IDI_DELRINA
24579	DccLocationChange
24581	[Unused]
24582	Phone number
24584	Service access number
24589	Calling card number
24593	Wait for second dial tone
24595	Wait
24599	Wait for bong
24602	Switch to pulse dial
24605	Switch to tone dial
24610	Hookflash
24613	Properties for: %s
24616	Install New Modem
24617	Install New Modem Type
24619	2400 bps
24621	4800 bps
24623	7200 bps
24626	9600 bps
24628	12000 bps
24630	14400 bps
24634	TAPI modem
24636	Standard COM port modem
24638	ISDN CAPI board
24640	DccModemChange
24645	Cellular
24749	As fast as possible
24751	Send at any rate
24753	Regular
24754	Class 1
24755	Class 2
24758	CAS
24761	WorldPort
24764	SendFax
24766	IDI_WINSOCK
24769	Waiting...
24771	COM%d
24772	Testing %s...
24773	%s:  No modem was found on this port.
24774	%s:  Modem found
24775		This modem supports:	
24776	Fax
24777	Data
24778	Voice
24779	%s:  This port is currently being used by a device
24780		Max fax transmit speed:	%lu bps
24781		Max fax receive speed:	%lu bps
24782		Fax Class:		
24783	Class 1
24784	Class 2
24785	Class 2.0
24786	Unknown
24787		Voice Type:		
24788	Voice101
24789	Rockwell
24790	Cirrus
24791	Sierra
24792	Unknown
24793	Tests completed
24794	Missing RegLib32.Dll
24795	Missing QueryCom function
24796	Querying modem...
24797	Completed
24798	No modem was found on %s.
\n
24799	Make sure the modem is turned on.
24800	This modem supports 
24801	.
\n
24802	This is a 
24803	 fax modem.
\n
24804	Max fax transmit speed:  %lu bps.
\n
24805	Max fax receive speed:  %lu bps.
\n
24806	 type voice modem
\n
24807	Modem busy.  Waiting...
24808	This modem is in use and cannot be tested right now.
\n
24809	Exit all apps that may be using this modem and click Retry.
\n
24810	Failed
24811	Direct Connect (Cabled)
24812	Windows modem
24813	Modem Properties
24814	Changing the fax class will cause any customized fax settings to be lost.  Continue?
24815	Please select an active modem!\n
24816	WZMODCFG.HLP
24817	Another CommSuite program is already using the Modem Properties dialog.
24818	TAPI modems can only be removed through the control panel.\nDo you wish to do this now?
24819	You are removing the active modem.  Are you sure?
24820	This modem has not been configured to work with WinFax.\nDo you want to run the WinFax modem configuration wizard now?
24821	The minimum transmit speed cannot be greater than the maximum transmit speed.
24827	             and cannot be tested.
24828	Unable to launch the Modem Control Panel
24829	Warning
24831	You must enter a country code.
24832	You must enter an area code.
24833	You must enter a long distance access code.
24834	You must enter an international distance access code.
24835	Setup cannot determine the proper voice settings for this modem.
24836	Dial '1'
24837	Dial '#'
24838	Connection Device
24839	Port
24840	Dialing Properties
24841	Modem Properties
24842	Unable to launch the Modem Control Panel
24843	U.S. Robotics
24844	Windows
24845	Windows
24846	WinFax PRO for Networks
24847	<none>
24921	Modem Configuration Wizard
24922	with speakerphone capabilities.
24923	with telephone
24924					
24925	The modem you have selected has less capability than the one you just tested.
\n\nClick Cancel and choose another model or click OK to use these settings.
24926	CAS/NetSatisFAXtion
24927	Please restart WinFax to unload the network components. This will avoid possible conflicts.
24929	This library does not contain a list of supported devices.
24930	This library does not contain required configuration information.
24932	WinFax PRO Device Installation Library|WFXWF*.DLL||
24933	No compatible modems were found.
24938	ISDN
24939	The modem you have previously configured has different capabilities then the one just tested.\n\nClick OK to keep the previous settings or cancel to select another model.
24940	This modem has not been configured and you do not have the Administrative\nprevilage necessary to run the Modem Configuration Wizard. 
24943	Please first select the calling cards from the Calling Card tab then enable this feature.
24944	The calling card you selected does not have a valid number, please go to the Calling Card tab to configure it or select a different one.
24945	WinFax Peer-to-Peer
24946	You must select a calling card from list below or enter a name for the new calling card.
24947	You have just changed the active modem.  Please restart Outlook before you use Symantec WinFax Starter Edition.
24948	Symantec WinFax Starter Edition
25088	Separator
25090	New Toolbar
25125	&Edit...
25127	C&olor Buttons
25129	&Show ToolTips
25131	&Large Buttons
25133	&WinFax Classic
25135	&Captions
25137	&Bar Styles
25139	Toolbars
25141	Unassigned
25151	Close
25152	OK
25153	&Apply
25154	< &Back
25155	&Next >
25156	&Finish
25157	&Help
25158	Cancel
25159	- 
25160	Could not find tips file.
\nTips not available.
\n
25165	TalkWorks Properties
25166	VOICE.HLP
25345	Invalid Folder or Directory.
25346	You are not authorized to modify shared Symantec WinFax Starter Edition settings.\nContact your Windows NT administrator to grant you this right.\nRegistry value accessed:\n%s.
25472	Default
25473	[No translation]
25474	1
25475	1
25476	011
25477	Canada (1)
27679	The following error occurred when attempting to 
27680	WinFax PRO
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61984	OK\n50
61985	Cancel\n50
61986	&Apply\n50
61987	&Help\n50
61988	Close