Newsgroups: rec.radio.amateur.misc
From: cook@stout.atd.ucar.edu (Forrest Cook)
Subject: Re: How to broadband a Yaesu FT-757GXII?
Message-ID: <1992Nov4.045408.8975@ncar.ucar.edu>
Sender: news@ncar.ucar.edu (USENET Maintenance)
Organization: Atmospheric Technology Division/NCAR Boulder, CO
References: <1992Nov4.013124.22012@ncar.ucar.edu>
Distribution: usa
Date: Wed, 4 Nov 1992 04:54:08 GMT
Lines: 14

In article <1992Nov4.013124.22012@ncar.ucar.edu> cook@stout.atd.ucar.edu 
(Forrest Cook) (me) writes:
>Does anybody have information on how to "broadband" a Yaesu FT-757GX II
>transceiver?  

Just after posting the article a friend of mine came in and he found
the unmarked switch on the upper main board near the display board and
under a bundle of wires.

1: remove the top cover
2: locate the small black switch that is located on the edge of the
   big horizontal board near the back of the main tuning dial.  The switch
   was under a bundle of wires.  You do not need to remove the metal cover
   from the board.
3: flip the switch.
4: replace the top cover.

Forrest Cook
cook@stout.atd.ucar.edu WB0RIO
{husc6|rutgers|ames|gatech}!ncar!stout!cook
 
Copied from the QRZ! Windows Ham Radio CDROM