Index
FaxLauncher

Desktop Requirements Overview

Steps for Installing FaxLauncher

         Note For Users without Direct SMTP Access to the Internet

Using FaxLauncher

Using the AddressBook

         Broadcast Faxing

Setting Your Preferences

         Setting Fine or Standard Modes

         Cover Page Settings

         Internet Configuration

         User Settings

FaxLauncher Security

Rates

Cancelling Faxes

Adding additional email addresses

Paying for FaxLauncher Service

Windows NT Version

Macintosh Version

Getting a New Version of FaxLauncher

Advanced Installation Procedures

         Example Configurations

                Scenario 1: Web browsing capability via a stand-alone modem

                Scenario 2: Web browsing capability on a LAN

                Scenario 3: Email-only capability on a LAN with Windows 3.11

                Scenario 4: Email capability on a LAN with Windows 95

                Scenario 5: If you do not have a direct Internet connection

Note for Windows 95 Users

Technical Support


Desktop Requirements Overview

FaxLauncher runs on Windows PCs that have TCP/IP Winsock Internet

connections and SMTP access to the Internet.

Software requirements on client PC:

- Windows 3.1, Windows 3.11 (Windows for Workgroups), or Windows 95

- TCP/IP software including winsock

Hardware requirements on the client PC:

- 386 or higher microprocessor

- Connection to Internet-enabled LAN, or installed Hayes-compatible modem

- 4 MB or greater RAM

- 4 MB free disk space

- Desktop or portable PC

Internet access requirements on the client PC:

- TCP/IP access (SLIP or PPP for dial-up access)

- Either an open SMTP (mail) port to Internet or SMTP access via an email

gateway

- Open FTP (file transfer) port to Internet, necessary only for

registration information interchange.

In order to send a fax, your proxy servers and firewalls must be configured

to support SMTP protocol to the desktop. FTP support is only necessary for

the ability to perform online  registration and account modification, such

as password changes.

Registration and account modification can also be accomplished by printing

out and faxing the form (fsregfrm.wri found in the faxsav directory) to

1-800-336-0835 (from inside the US) or +1 908 906 1113 (from outside the US),

by telephoning Customer Service at 1-800-828-7115 or +1 908 906 1555, or by

completing a form on-line at the FaxSav Web site at http://www.faxsav.com.


Steps for Installing FaxLauncher

1. You must have a TCP/IP Internet connection to use FaxLauncher.  When

installing FaxLauncher from diskette:

 a. Insert the diskette into your PC.

 b. From Program Manager (in Windows 3.x), pull down the File menu and

select Run, or from Start Menu (in Windows '95), choose Run.

 c. Type a:setup (or b:setup, whichever is appropriate), and click OK.

2. Follow the installation instructions that appear on the screen.

3. Registration choices:

 If you are not already a FaxSav for Internet customer, and will be paying

via credit card, choose First Time registration.

If you are not already a FaxSav for Internet customer, and will be paying

via corporate invoice, register first with Customer Service.  Either fill

out and fax back the registration form found at our Web site, or contact

Customer Service to request a form (1-800-828-7115 from inside the US., or

+1 908 905 1555 from outside the US, or sales@faxsav.com by email).

If you are already a FaxSav for Internet customer (you have used

FaxLauncher, FaxSav for Internet, or FaxMailer), or have previously been

registered with Customer Service, then choose Registered User.

If your company is already a FaxSav for Internet customer, your email

address must be on the list of registered users. If it is not, have your

contact person email support@faxsav.com with your address.  After you

receive a welcome email, run the registration utility and choose Registered

User.


Users without SMTP access

The default configuration for FaxLauncher attempts to deliver the SMTP Fax

message directly to one of our service gateway hosts.  This is intended to

avoid lengthy mail gateways hops and intermediate mail gateways imposing

limits on message length.

In some corporate LAN configurations it is not desirable to allow direct

SMTP traffic outside the firewall.  You can configure FaxLauncher to

forward the fax message to an internal mail gateway and then to the

Internet by running the FaxLauncher Configuration Utility that was

installed on your PC.  When the Configuration Utility opens, click on the

folder tab labeled "Internet."  You may need to consult your Internet

administrator for the necessary information.  Enter the name of your domain

name server and the IP address of the primary mail gateway host.  If you

have a secondary mail gateway host, supply that number as well.


Using FaxLauncher

Remember that you must be registered with FaxSav in order to use this

software. If you have not already registered, please run the Registration

Utility to become a full or trial user.

To send a fax:

1. You must have your Internet connection up before you can fax.

2. With the document you want to fax open, pull down the File menu and

select "Print."

3. Choose Printer or Printer Setup or Setup (whichever button you see).

(If you do not see any such choice, then click Cancel and from the File

menu, select "Printer Setup." From the list of printers, choose and

double-click on "FaxLauncher on FAX:". Pull down the File menu and select

"Print."  Continue with step 7.)

4. From the list of printers, choose and double-click on "FaxLauncher on FAX:."

5. When your choice has been activated, click Close or OK to accept it.

6. Click OK to initiate the printing.

7. In the "Fax:" field, enter the fax number you would like to send to

including country code and area/city code, even if you are faxing locally.

For faxes to the US, Canada, or the Caribbean, you should use an 11-digit

number in the form:

1 + (3-digit area code) + (7-digit local number)

For example, the complete fax number for a fax being sent to New York, USA

could be:

12125551234    -or-      1-212-555-1234

Dashes (-) are accepted in the fax number field, but no other special

characters are allowed.

Faxes to all other locations should be of the form:

(country code) + (city code) + (local number)

International access codes (such as 011 in the United States) should not be

used.  For example, the complete fax number for a fax being sent to Tokyo,

Japan could be:

81312345678    -or-       81-3-1234-5678

You may enter multiple fax numbers in this field.  Separate them with commas.

8. In the other fields on the form, you may choose to enter any of the

following:

Receive Delivery Notice

To receive delivery notices via email, please check this box.

Address Book

Click on this button to add a fax number to your address book, make a new

broadcast list or add to your current one, and to use a FaxSav EZ List.

Subject

Enter the Subject of your fax in this field.  This Subject will also be

used to refer to this specific fax in the delivery notice that is emailed

to you.

Use Cover Page

To use a cover page, please check this box.

To

Please enter the name of the person or organization to whom you are sending

the fax.

From

Please enter your name.

Organization

Please enter the name of your organization (if any).

Reply Fax

Please enter the number where you would like the recipient to fax you a reply.

Note

Any notes you would like to put on your cover page.

Some of these fields may be saved as defaults or preferences by using the

FaxLauncher Configuration Utility.(See Setting your preferences)

9. Click OK to send the fax.

10.Wait until the message "Fax has been sent to FaxSav!" appears before

doing anything else in your document.

To fax again, you pull down the File menu and select "Print" and resume

with step 7 above.  To be able to print to your paper printer, you need to

change your printer setup as in steps 1 to 6, except you should choose the

name of your paper printer instead of FaxLauncher.


Using the Address Book

The "Address Book" button on the main window for FaxLauncher will send you

to the Address Book. If you are looking at the Address Book for the first

time, there will be no numbers in the lists. For an explanation on how to

add or remove entries, please see below.  To select a destination from the

addresses in the book, click on the desired destination's name found under

"Available Fax Destinations" and then click on the ">>>" button to move it

to the "Fax Destinations for this fax" list.  When you click on OK, the

selected fax numbers are entered into the fax delivery fields.

Avialable Fax Destinations

Edit

To edit an individual fax destination or list entry, please click on "Edit." You

willthen be able to edit the fax number, name, and a description of this fax

entry. If is the selection is a local broadcast list, you will be able to add or remove members

of that list. If the selection is an EZ list entry, you will be able to choose which

of your lists stored at FaxSav that you will use.

Add

To add an entry to your address book, please click on the "Add" button and

an address book entry dialog box will pop up giving you a choice of entry types

Remove

To remove address book entries, please click on the "Remove" button.

Fax Destinations for this Fax

Click on an entry in the Available Fax Destinations list, and then click >>> to add this to the list of  fax numbers to be used for this fax.. Or you may double-click on an entry, and it will automatically be added.

Remove

To remove a fax destination previously selected for the current fax, click on its entry in the Fax Destinations For This Fax list, and then click remove.

Note: The Address Book may only be reached by beginning to fax. You may

make a change to your Address Book in this way and then cancel the sending

of the fax, and your changes will be saved.


Broadcast Faxes
Broadcast Faxing

There are two ways to broadcast faxes, i.e. send the same fax to multiple

fax machines.  You can build a "Local Broadcast List" with a list of

numbers chosen from your Address Book and maintained by you "locally."

Alternately, you can use the EZ List service where your broadcast list is

saved at FaxSav.

Local Broadcast List

If you select "Local Broadcast List," it is important to understand that

the Local Broadcast List must consist of numbers already in your Address

Book.  The "Add" button on this dialog box will let you create new

individuals or EZ-Lists.  From these existing Address Book members you can

then create a name for the new list.  Enter that new name into the "Name"

field.  Fill in the description.  Then "Add" the numbers that should be in

the broadcast list by clicking on each and then selecting the button labeled

>>>. When the list is complete, click "OK," and you will then have a Broadcast

List that you can use for sending a single fax to multiple users.

FaxSav EZ List

If you select "FaxSav EZ List," you will be tapping into a powerful service

that remotely manages your broadcast list.  With the FaxSav EZ List option,

your company will have set up a group of broadcast lists stored at FaxSav

headquarters, each with its own unique numeric identifier so that both

computer users and fax users can take advantage of the list.  Clicking "OK"

in the EZ List dialog box gives the selected numbered list your own

personal identification name so that you can remember which list is which.

For more information on the EZ List Service, send email to

broadcast@faxsav.com.


Setting Your Preferences

FaxLauncher makes several faxing options available to you for all of your

faxing.  Run the FaxLauncher Configuration Utility that was installed on

your PC.  You will be presented with a number of fields that can be set or

changed for all of the faxes you send.  Changing these fields in this

dialog box means that they will not have to be re-entered in the main

dialog box every time you send a fax.

1. Clicking on the "Account Information"  folder tab lets you enter:

Return email address

Please use the email address to which you would like your delivery notices sent.

Receive delivery notice

Check this box to receive an email delivery notice automatically by default.

Password

Only change your password here if FaxSav technical support instructs you to

do so.  If you would like to change your password yourself, you must use

the FaxLauncher Registration Utility, choosing "Change Password, Submit

Registration."

2. Clicking on the "Cover Page"  folder tab lets you enter:

Use cover page by default

Check this if you would like to use a default cover page.  You may also

choose whether to use a cover page while you are preparing to send any

given fax.

From

Your name.

Organization

The organization from which you are faxing.

Reply fax number

The fax number to which you would like a reply to be faxed.

3. Clicking on the "Internet" folder tab, you will see the following information:

Domain name server

You may enter the name of your domain name server. If you do not provide

one here, FaxLauncher will find a domain name server automatically.

Primary mail gateway

You may enter the IP address of your primary email gateway here. You only

need to do this when you do not have a direct, open SMTP port to the

Internet from your PC.

Secondary mail gateway

You may enter the IP address of your primary email gateway here, if you

have one. You only need to do this when you do not have a direct, open SMTP

port to the Internet from your PC.

Alternative SMTP port

If you are specifying an alternative SMTP route through your email gateway,

and your server channels SMTP through a port other than the commonly used

ports, 23 or 25, then you must specify the port used here.


Setting Fine or Standard Modes

By default, FaxLauncher is set to fax in normal (or standard) mode. To fax

in fine mode, go to the Windows Print Manager and pull down the Options

menu, and select "Printer Setup."  Choose "FaxLauncher on FAX:" from the

list of installed printers and then click on the "Setup" button.  In the

next dialog box, pull down the list of Resolution options and select "Fine

Resolution"  Click OK and then close to save your settings. This will make

all of your faxes transmit in Fine mode.  If you wish to set the mode back

to standard, you need to return to this dialog box and select "Standard

Resolution."

Sending in fine mode may cost more than normal mode. Please see

http://www.faxsav.com/faxsavinternet/html/rates.html

for more information.


FaxLauncher security

FaxLauncher uses a two-level encryption scheme based on RSA's 40-bit

encryption methodology, the maximum level of encryption legal for export.

Thus, as the fax file travels through the Internet to the FaxSav Internet

server network, the body of the fax is kept confidential. When the fax

reaches the fax node closest to the destination fax number, the body is

decrypted, and the pages are converted into fax images and delivered

unencrypted via telephony to the destination fax machine, just like a

regular fax-to-fax transmission.

How the Encryption Works

The body of the fax is encrypted with a 40-bit symmetric key randomly

seeded by the FaxLauncher client software.  This 40-bit key and the user's

password (which is stored in a simple encrypted format on the client

machine) are encrypted with the FaxLauncher public key, a 512-bit modulus,

that is stored in the client software. The encrypted combination of fax and

key is UUencoded and sent via SMTP to a FaxSav Internet server.


Rates

For the latest FaxSav for Internet rates please go to:

http://www.faxsav.com/faxsavinternet/html/rates.html


Advanced Installation Procedures

Example Configurations

This User's Manual covers the most straightforward connections to the

Internet.  However, there are a few more complicated situations that arise

from interconnectivity at the site where you receive Internet access.

Below, we've listed different potential Configuration Scenarios and how you

can get access to the FaxSav network if you have that type of

configuration.  You may wish to consult your System Administrator for

assistance.

Scenario 1

Scenario 2

Scenario 3

Scenario 4

Scenario 5


Configuration Scenario 1

You have Web browsing capability via a stand-alone modem

Your system configuration looks like:

Client Operating System

Windows 3.1 or 3.11

Network Operating System

N/A

LAN Configuration

N/A

Internet Access

Dial - Up

Internet Protocol Allowed to Client

HTTP, SMTP, and FTP

To Prepare for FaxLauncher: No preparation necessary. Ready to install and

use FaxLauncher.

Comments: Any direct Internet Service Provider will support this type of

connection.  Internet access cannot be through a shell account. The latest

versions of CompuServe (version 2.0.1 or later) and America Online (Version

 3.0 or later)  use winsock connections. Prodigy does not yet support the use

of FaxLauncher.


Configuration Scenario 2

You have Web browsing capability on a LAN

Your system configuration looks like:

Client Operating System Windows

3.1 or 3.11, or Windows 95

Network Operating System

Windows NT or Netware

LAN Configuration

Ethernet

Internet Access

Dedcated Line

Internet Protocol Allowed to Client

HTTP, SMTP, and FTP

To Prepare for FaxLauncher: No preparation necessary. Ready to install and

use FaxLauncher.

Comments: If the PC is set up for Web browsing, then it is very likely

ready to use FaxLauncher. If a proxy server or firewall is installed, the

SMTP port must be available to the client PC or you must configure

FaxLauncher to point to your email gateway.


Configuration Scenario 3

You have email-only capability on a LAN with Windows 3.11

Your system configuration looks like:

Client Operating System

Windows 3.11

Network Operating System

Windows NT or Netware

LAN Configuration

Ethernet

Internet Access

Dedicated line to LAN

Internet Protocol Allowed to Client

None, Internet email by LAN gateway

To Prepare for FaxLauncher:

1. Install TCP/IP stack with winsock, and configure.  A license will cost

from $50 - 100 per PC from FTP Software or Novell.  Microsoft provides free

software (downloadable from Internet).

2. Assign IP address to PC (fixed or dynamic).

3. Open SMTP port to this IP address for outgoing communication or after

installation, you must configure FaxLauncher to point to your email gateway

(See Internet Configuration)

4.  Install FaxLauncher.

Comments: A PC need not be given Web browsing access (HTTP), or file

transfer access (FTP) to use FaxLauncher.  FTP access is necessary only for

on-line registration and account maintenance.


Scenario 4

You have email capability on a LAN with Windows 95

Client Operating System

Windows 95 (any language version)

Network Operating System

Windows NT or Netware

LAN Configuration

Ethernet

Internet Access

Dedicated line to LAN

Internet Protocol Allowed to Client

 Internet email by LAN gateway

Solution:

1. Assign IP address to PC (fixed or dynamic).

2. Open SMTP port to this IP address or after installation, you must

configure FaxLauncher to point to your email gateway (See Internet Configuration)

3. Install FaxLauncher.

Comments: A PC need not be given Web browsing access (HTTP), or file

transfer access (FTP) to use FaxLauncher.  FTP access is necessary only for

on-line registration and account maintenance.


Scenario 5

If you do not have a direct Internet connection...

Contact an Internet access provider.  Recommended global providers:

UUNet

1-800-488-6383 or +1 703 206 5600

CompuServe

1-800-433-0389 or +1 614 798 3356

IBM

1-800-426-3333 or +1 520 574 4600

Netcom

1-800-638-2661 or +1 408 983 5970

Any of these providers can assist with each step of the installation of

Internet access and provide security recommendations.  Software for each PC

may be included free with service package.  Prices for service can range

from $10 per month for a single PC with limited hours of use to $1200 per

month for a dedicated T1 to connect an entire corporate site with unlimited

hours of use.  To use FaxLauncher, you must have a winsock and direct

TCP/IP connection to the internet.


Note for Win 95 users

If you use a 16-Bit winsock implementation on Windows 95 and have not

configured a 32-Bit winsock, change theUseDeliver entry in the DELIVERY

section of FaxSav.INI file to the value 16.  This will cause FaxLauncher to

use the 16-Bit delivery system instead of the 32-Bit delivery system.

                ;before

                [DELIVERY]

                Delivery32=c:\faxsav\FSDELIV.EXE

                Delivery16=c:\faxsav\FSDELV16.EXE

                UseDeliver=1

                ;after

                [DELIVERY]

                Delivery32=c:\faxsav\FSDELIV.EXE

                Delivery16=c:\faxsav\FSDELV16.EXE

                UseDeliver=16


Technical support

If you are having trouble with installation or initial setup, before

calling Technical Support, please review the Advanced Installation

Procedures Section .  For the latest information on billing and

virtually all other issues, we encourage you to visit our Web Site at

http://www.faxsav.com.

If you have problems or questions, please email them to support@faxsav.com.

Please be as specific as possible about the error situation and your Internet

 connection.  For instance, let us know the exact error message, the software

 package you were using at the time, which version of FaxLauncher, and the

 type of Internet connection you have (on-line service through Compuserve,

direct service through Netcom, or a corporate LAN connection, for example).

The latest version of FaxLauncher including any bug fixes is available for free

downloading at ftp.faxsav.com/pub/faxsav.exe. You may also send an email

 message to faxlauncher@faxsav.com to have the file automatically emailed to you.

If you would like to speak to a person, please call FaxSav Customer

Service.

From inside the US call between 9:00AM - 9:00PM Eastern Time:

1-800-828-7115 and choose #2 for Internet faxing services at the prompt.

From outside the US call between 3:00PM - 5:00AM GMT: +1 908 906 1555 and

choose #2 for Internet faxing services at the prompt to receive support in

English.

You may also contact the authorized FaxSav representative in your

country.


Cancelling Faxes

There is no way of cancelling a fax once it has been sent to the FaxSav network. Your fax is processed in real time and immediately sent to the destination fax machine.


Adding additional email addresses

To add email addresses of additional people, please email them to support@faxsav.com. If you would like to add another address of your own, please run the Registration Utility that was installed on your P.C., or email your request to support@faxsav.com.


Paying for FaxLauncher Service

You may register for continued use of FaxLauncher with a Visa, Mastercard, or American Express credit card. You may use the Registration Utility, installed on your PC. to send this information encrypted to FaxSav, or you may choose Off-Line Registration and print out the form to fax to FaxSav.

If you are interested in invoice billing and will be spending over US$ 25.00 per month, please choose Off- Line Registration and print out the form to fax to FaxSav. This option is only available in countries where there is a FaxSav representative. Contact sales@faxsav.com for more information.


Macintosh Version

A Macintosh version of FaxLauncher will be available from http://www.faxsav.com in September, 1996.


Latest Version

The latest version of FaxLauncher including any bug fixes is available for free downloading at ftp.faxsav.com/pub/faxsav.exe. You may also send an email message to faxlauncher@faxsav.com to have the file automatically emailed to you.


Cover Page

FaxLauncher makes several faxing options available to you for all of your

faxing.  Run the FaxLauncher Configuration Utility that was installed on

your PC.  You will be presented with a number of fields that can be set or

changed for all of the faxes you send.  Changing these fields in this

dialog box means that they will not have to be re-entered in the main

dialog box every time you send a fax.

Clicking on the "Cover Page"  folder tab lets you enter:

Use cover page by default

Check this if you would like to use a default cover page.  You may also

choose whether to use a cover page while you are preparing to send any

given fax.

From

Your name.

Organization

The organization from which you are faxing.

Reply fax number

The fax number to which you would like a reply to be faxed.


User Settings

FaxLauncher makes several faxing options available to you for all of your

faxing.  Run the FaxLauncher Configuration Utility that was installed on

your PC.  You will be presented with a number of fields that can be set or

changed for all of the faxes you send.  Changing these fields in this

dialog box means that they will not have to be re-entered in the main

dialog box every time you send a fax.

Clicking on the "Account Information"  folder tab lets you enter:

Return email address

Please use the email address to which you would like your delivery notices sent.

Receive delivery notice

Check this box to receive an email delivery notice automatically by default.

Password

Only change your password here if FaxSav technical support instructs you to

do so.  If you would like to change your password yourself, you must use

the FaxLauncher Registration Utility, choosing "Change Password, Submit

Registration."


Internet Configuration

FaxLauncher makes several faxing options available to you for all of your

faxing.  Run the FaxLauncher Configuration Utility that was installed on

your PC.  You will be presented with a number of fields that can be set or

changed for all of the faxes you send.  Changing these fields in this

dialog box means that they will not have to be re-entered in the main

dialog box every time you send a fax.

Domain name server

You may enter the name of your domain name server. If you do not provide

one here, FaxLauncher will find a domain name server automatically.

Primary mail gateway

You may enter the IP address of your primary email gateway here. You only

need to do this when you do not have a direct, open SMTP port to the

Internet from your PC.

Secondary mail gateway

You may enter the IP address of your primary email gateway here, if you

have one. You only need to do this when you do not have a direct, open SMTP

port to the Internet from your PC.

Alternative SMTP port

If you are specifying an alternative SMTP route through your email gateway,

and your server channels SMTP through a port other than the commonly used

ports, 23 or 25, then you must specify the port used here.


Registration

First Time

If you would like to register for FaxLauncher for the first time please click on the First Time button. You will then be prompted if you would like to register on-line or off-line.

Trial Registration

For a trial registration please click on Trial Registration. This will enable you to fax 10 free faxes for free. All you have to do is enter your email address and you will be on your way.

Registered User

Choose this option if you are already a registered user of any of FaxSavs Internet fax services including FaxMailer or FaxScan. Also use this option if you have been pre-registered off-line with FaxSav, or if you are installing FaxLauncher on a new machine using an already registered email address.

Multiple Users

If you would like to register a corporate account with multiple users, please choose this option.

Register Later

If you are not sure how you should register, you may leave this utility now and run it later from the icon installed on your PC.


Entry

To add or remove entries from the address book, simply click on the "Add"

or "Remove" buttons.  When you select "Add," you will be presented with one

of three options:

Individual Fax Machine is meant for a single fax machine.

You may enter in the name of the recipient for this

fax number, a description of this fax number, and the actual fax

number, including the country code.  US users please enter

area code as well, even for a local call.

FaxSav Ez List is a powerful service that remotely manages your

broadcast lists.  With the FaxSav EZ List option, your company

will have set up a group of broadcast lists stored at FaxSav

headquarters, each with its own unique numeric identifier so that

both computer users and fax users can take advantage of the

capability.You can assign a name to a numbered EZ List by

using the Address Book. For more information on the Ez List

Service send email to broadcast@faxsav.com.

A Local Broadcast List is a list of fax numbers that have already been stored locally

in your address book.The "Add" button on this dialog box will let you add

new individual  entries or EZ Lists to your address book. You may provide a Name

 for the list you are creating. And you may provide a larger Description of this list.

Then "Add" the numbers that should be in the broadcast list by clicking on each and

then clicking on the ">>>" button. When the list is complete, click "OK," and you will

 then have a Broadcast List that you can use for sending a single fax to multiple users.


Individual Fax Machine

Individual Fax Machine is meant for a single fax machine.

You may enter in the name of the recipient for this

fax number, a description of this fax number, and the actual fax

number, including the country code.  US users please enter

area code as well, even for a local call.


FaxSav EZ List

FaxSav Ez List is a powerful service that remotely manages your

broadcast lists.  With the FaxSav EZ List option, your company

will have set up a group of broadcast lists stored at FaxSav

headquarters, each with its own unique numeric identifier so that

both computer users and fax users can take advantage of the

capability.You can assign a name to a numbered EZ List by

using the Address Book. For more information on the Ez List

Service send email to broadcast@faxsav.com.


Local Broadcast List

A Local Broadcast List is a list of fax numbers that have already been stored locally

in your address book.The "Add" button on this dialog box will let you add

new individual  entries or EZ Lists to your address book. You may provide a Name

 for the list you are creating. And you may provide a larger Description of this list.

Then "Add" the numbers that should be in the broadcast list by clicking on each and

then clicking on the ">>>" button. When the list is complete, click "OK," and you will

 then have a Broadcast List that you can use for sending a single fax to multiple users.


New Registration

Additional Email Addresses

If you personally have more than one address from which you would like to use FaxSav for Internet services, click here to enter them. If you want to add other peoples email addresses to your account, first register yourself, and then email the additions to support@faxsav.com.

Credit Information

Click here to enter or update your credit card information. VISA, Mastercard, and American Express are accepted.

Password

Click here to enter the password that will make your account secure. You may also use this password when performing maintenance functions at the Web site.

Submit Registration

When you have completed all of the required fields on the main registration screen and the credit information screen, you may click here to upload your registration information to FaxSav. You must have open FTP access to complete this step. If this step fails, please complete the off-line registration form to fax to FaxSav, or contact Customer Service at +1 908 906 1555 from outside the US, or 1-800-828-7115 from inside the US. Or you may contact your local FaxSav representative.


Changing Registration

Additional Email Addresses

If you personally have more than one address from which you would like to use FaxSav for Internet services, click here to enter them. If you want to add other peoples email addresses to your account, first register yourself, and then email the additions to support@faxsav.com.

Credit Information

Click here to enter or update your credit card information. VISA, Mastercard, and American Express are accepted.

Change Password

Click here to change your password. If you are receiving Password Mismatch errors when faxing, do not try to change your password here. Run the Configuration Utility, and change the password in Account Information.

Submit Registration

When you have completed all of the required fields on the main registration screen and the credit information screen, you may click here to upload your registration information to FaxSav. You must have open FTP access to complete this step. If this step fails, please complete the off-line registration form to fax to FaxSav, or contact Customer Service at +1 908 906 1555 from outside the US, or 1-800-828-7115 from inside the US. Or you may contact your local FaxSav representative.


Windows NT version

A windows NT version will be available in late 1996.