002 048 113 132 155 173 188 204 224 241 064 076 088 101 000 000 000 000 000
 Command:  Edit/Weaving                           < EW > 
 Purpose:  Door into the Light Weave editor and Loom control  
 Information:
     This the primary editor and includes the Patternland Light 
     Weave menus.  It shows the drawup, threading, and either 
     harness combinations (lift plan) or treadling with tieup--
     depending on whether or not its Weave/Treadle Mode is 
     selected.  If Weave/Weave is selected, the loom control 
     weaving window is also presented.  Editing keys are displayed 
     by pressing the <?> help key while an edit window is active. 
 Comments: 
     The size of the windows is determined dynamically upon each 
     entry to the editor, based on the number of harnesses or 
     treadles or tieups in use.  If you scroll an editing window 
     and add more harnesses, the window will be enlarged upon 
     next entry to the editor.  The pattern draft gets equal 
     demand on window space in Edit/Weaving; in Edit/Weft-Warp/ 
     Edit, the harnesses/treadles get priority. 

     Three settings in Edit/Modes control background appearance 
     and character size and squareness.
     
     Display/Color Weave determines if single or multiple colors 
     are available.

     Display/Text Options/Warp-Weft Multi-Symbol determines if 
     multiple warp and weft symbols are available.

     Options/Data/Numbering Warp-Weft determines if numbering 
     appears in the windows.

     Options/Data/Peg Plan Numeric controls whether numbers are 
     used on the grid/board for data.

     The arrangement of windows is controlled by Options/Format.

 See Also:  The Light Weave editor menus context help
            Edit/Modes
            Display/Color Weave 
            Display/Text Options/Warp-Weft Multi-Symbol
            Options/Data/Numbering Warp-Weft
            Options/Data/Peg Plan Numeric 
            Options/Format
 ______________________________________________________________

 
 Command:  Edit/Range                             < ER > 
 Purpose:  Change ranges used for editing, display and printing.
 Information:
     Ranges are NOT the SIZE of a weaving or design--they are 
     simply a way of identifying a section of weaving or design. 
     You can also alter ranges through Display/Range and 
     Print/Range. 
 Comments: 
     Normally, your ranges will equal the entire weaving.
 
 See Also:  Edit/Range/all options
            Display/Range
            Print/Range
 ______________________________________________________________


 Command:  Edit/Range/Warp                        < ERA > 
 Purpose:  Change warp range.
 Information:
     Allowable range is limited by current warp limit.  Use 
     Edit/Warp/Size to change actual weaving size.
 Comments: 
     Normally, the warp range will be 1 to warp limit.
 
 See Also:  Edit/Range/Weft
 ______________________________________________________________


 Command:  Edit/Range/Weft                        < ERE > 
 Purpose:  Change weft range.
 Information:
     Allowable range is limited by current weft limit.  Use 
     Edit/Weft/Size to change actual weaving size.
 Comments: 
     Normally, the weft range will be 1 to weft limit.
 
 See Also:  Edit/Range/Warp
 ______________________________________________________________


 Command:  Edit/Range/Column                      < ERC > 
 Purpose:  Change the design screen column range
 Information:
     Allowable range is limited by current design size.  Use 
     Edit/Design/Size to change actual design size.
 Comments: 
     Normally, the columns range will be 1 to Design Columns 
     Limit. 
 
 See Also:  Edit/Range/Row 
 ______________________________________________________________


 Command:  Edit/Range/Row                          < ERR > 
 Purpose:  Change the design screen row range 
 Information: 
     Allowable range is limited by current design size.  
     Use Edit/Design/Size to change actual design size. 
 Comments: 
     Normally, the row range will be 1 to Design Rows Limit. 
 
 See Also:  Edit/Range/Columns 
 ______________________________________________________________


 Command:  Edit/Warp                               < EA > 
 Purpose:  Menu--All warp editing options
 Information: 
     Menu gives access to grid editor screen as well as numerical 
     editing and other editing options.  All options are 
     duplicated on the Edit/Weft menu.
 Comments: 
     Use Edit/Warp to change an existing weaving or work on a new 
     one using warp-only editing.

     Use Edit/New Weaving to start fresh.
 
     Window sizing favors Warp harnesses over pattern draft.
     
 See Also:  Edit/Warp/all options
            Edit/New Weaving 
 ______________________________________________________________


 Command:  Edit/Weft                               < EE > 
 Purpose:  Menu--All weft editing options
 Information: 
     Menu gives access to grid editor screen as well as numerical 
     editing and other editing options.  All options are 
     duplicated on the Edit/Warp menu, except the added switch to 
     set Treadle Mode ON/OFF.
 Comments: 
     Use Edit/Weft to change an existing weaving or work on a new 
     one using weft-only editing.

     Use Edit/New Weaving to start fresh.
 
     Treadle Mode determines if you work with harness 
     combinations or with tieups and treadling.

     Window sizing favors harnesses/treadles over pattern draft.

 See Also:  Edit/Weft/all options
            Edit/New Weaving 
 ______________________________________________________________


 Command:  Edit/Tieup                              < ET > 
 Purpose:  Menu--All tieup-related editing options
 Information: 
     Menu gives access to grid editor screen, numerical 
     editing, as well as the special features Magic Tieup, 
     Reverse Tieup, and Tromp-as-Writ.
 Comments: 
     Magic Tieup and Tromp-as-Writ both create treadling which 
     could also come under Edit/Weft.  However it is a treadling 
     which is created or which creates the weaving in relation to 
     the tieup you have edited.  Reverse Tieup uses the current 
     treadling to alter the harness combinations.

 See Also:  Edit/Tieup/all options
            Edit/New Weaving 
 ______________________________________________________________


 Command:  Edit/Design                             < ED > 
 Purpose:  Menu--All design-related editing options
 Information: 
     Menu gives access to design editor screen, related Size, 
     New, and Transfer Weaving editing features, as well as the 
     special features Weave Wizard and Block Weave Warp. 
 Comments: 
     Weave Wizard creates an entire weaving.  Block Weave Warp 
     can permanently alter the threading using Design screen 
     threading blocks.
     
 See Also:  Edit/Design/all options
 ______________________________________________________________


 Command:  Edit/Colors                             < EC > 
 Purpose:  Menu--All color-related for editing options 
 Information: 
     Menu gives access to numerical Change screens, and other 
     editing options, as well as the special feature Symbols to 
     Colors. 
 Comments: 
     Multi-color and multi-symbol selections can be also be made 
     separately or simultaneously on the grid editors.  Press 
     help key while editing for available commands. 
     
 See Also:  Edit/Colors/all options
            Edit/Symbols
 ______________________________________________________________
                         

 Command:  Edit/Symbols                            < ES > 
 Purpose:  Menu--All symbol-related editing options
 Information: 
     Menu gives access to numerical Change screens, and other 
     editing options, as well as the special feature Colors to 
     Symbols and Write Title Line. 
 Comments: 
     Multi-symbol and multi-color selections can be also be made 
     separately or simultaneously on the grid editors.  Press 
     help key while editing for available commands. 
     
     Symbol number is also the variable magnification factor in 
     display and printer graphics if Variable Magnification is 
     ON.

 See Also:  Edit/symbols/all options
            Edit/Colors 
 ______________________________________________________________
                         

 Command:  Edit/Modes                              < EM > 
 Purpose:  Menu--Change editing and display modes
 Information: 
     Menu includes switch for numerical/grid editing; style of 
     grid background and character width; EGA/VGA 43-/50-line mode
     for editing and text displays, plus Combined Numeric toggle. 

 Comments:
     EGA/VGA mode requires correct setup under Setup/Displays.

     Wide blocks allows Peg Plan Numeric to use numerals for 
     harnesses 10-32 instead of letters A...W for numbers above 9.

 See Also:  Edit/Modes/all options
 ______________________________________________________________
                         

 Command:  Edit/New Weaving                        < EN > 
 Purpose:  Begin a new weaving        
 Information: 
     Erases warp and weft and, optionally, tieups and presents 
     numeric or grid editing screens to create a new weaving.
 Comments: 
     New weaving is affected by the Edit/Modes commands, Color 
     Weave mode, Multi-Warp and Multi-Weft Symbol modes.  

     The grid editors are also affected by Options/Format and 
     several Options/Data options.

 See Also:  Edit/Modes/all options
            Display/Color Weave
            Display/Text Options
            Options/Data
            Options/Format             
 ______________________________________________________________

