home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Boldly Go Collection
/
version40.iso
/
TS
/
17A
/
BIGMENU4.ZIP
/
README.TXT
< prev
next >
Wrap
Text File
|
1992-03-09
|
4KB
|
90 lines
README.TXT (Important notes and additions)
Last update: March 9, 1992.
******** REINSTALLATION
1] VERY IMPORTANT: You must run the install program (follow the instructions
below) to change your existing menu, index and phone book data files to the new
format. ** YOU CAN NOT SIMPLY COPY THE NEW FILES! **
******** INSTALLATION
1] IMPORTANT: You must run the install program from a floppy drive for the
program to function. To do this you should have a program diskette.
2] If you do not have a BIGMENU program diskette then create one by copying
the following (14) files to the root directory of a floppy disk:
[file] [description]
ACTIVE PRG Tracks the active menu.
BM4_M PRG Holds program characteristics.
CHECKDSK BAT Sample batch file.
COLORSET PRG Holds default program colors.
INSTALL EXE Install program.
MENU4 EXE Menu program. Can not be executed without BM4.BAT.
MESSAGE PRG Holds daily messages.
PB2 DTA Holds phone book data.
PHONE_BK IDX Holds phone book index.
README TXT This file.
README BAT Runs README.TXT.
UTILITY MNU Sample menu.
UTILITY FIL Sample menu characteristics file.
UTILITY IDX Sample menu index.
If you do have a program disk then make sure the above files are on the disk.
The lastest release is 3-9-92. All of the above files should be dated 3-9-92.
3] Use the following commands in DOS to install (first time) or reinstall:
To install from the A: drive ==>
(Put your program diskette into the A: drive)
C:\> A:
A:\> INSTALL
To install from the B: drive ==>
(Put your program diskette into the B: drive)
C:\> B:
B:\> INSTALL
4] Reinstallation will convert your existing BIGMENU data and menu files to
the new improved format.
******** UPLOADING TO A BULLETIN BOARD
1] Use your communications program to upload BIGMENU4.ZIP to your local
bulletin boards. If you do not have BIGMENU4.ZIP then you must create it by
following the instructions listed below (2).
2] Copy the (14) program files (above) to a temporary directory on your hard
drive. Use a compression utility to compress the program files into one file.
Upload the compressed file (BIGMENU4.ZIP) to the bulletin board.
Commands used to compress BIGMENU program files:
(create a temporary directory)
C:> MD\TEMP
(copy the 14 program files to the TEMP directory)
C:> COPY [program files] C:\TEMP
(use PKWARE to compress program files creating BIGMENU4.ZIP)
C:> PKZIP -a BIGMENU4.ZIP C:\TEMP\*.*
(use your communications program to upload BIGMENU4.ZIP)
******** OTHER INFORMATION
1] To print this file use the following command at the DOS prompt:
C:> TYPE README.TXT >PRN
2] If you find problems with the program or have complaints or suggestions
then write or call:
First Step Computer Ideas of Orlando
P.O. Box 161463
Altamonte Springs, Fl 32716-1463
1-407-869-8999
3] To register: Print a registration form by choosing <F8> in any menu.
Registration is only $35. If you would like an unregistered up to date copy
of BIGMENU then send $5 to the address above and please specify floppy disk
size (5.25 in. or 3.5 in.) and density (360K, 720K, 1.2M, or 1.44M).
*** PLEASE REGISTER AND DISTRIBUTE THE PROGRAM TO OTHERS ***