home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 8
/
CDASC08.ISO
/
VRAC
/
CMINFO.ZIP
/
II06260.CM
< prev
next >
Wrap
Text File
|
1993-04-27
|
16KB
|
193 lines
PRINT SELECTION FOR APAR - II06260 93/04/27
PIN INFO-PC-LIB-091 II06260-IN-INCORROUT
F - - -
SYSTEM HANGS ON 8590/95 W/IMAGE ADAPTER/A WITH OS/2 2.0 AND
ES/1 COMMUNICATIONS MANAGER
END OF ABSTRACT FESN5NFO000-000
REPORTED RELEASE R001
ERROR DESCRIPTION:
+-------------------------------------------------------------+
|II06260 |
| |
| COMMUNICATIONS MANAGER INFORMATION APAR |
| |
| SYSTEM HANGS ON 8590/95 W/IMAGE ADAPTER/A |
| WITH OS/2 2.0 AND ES/1 COMMUNICATIONS MANAGER |
| |
|LAST UPDATE: 12/17/92 BY: RHB |
| |
|PURPOSE: THIS INFORMATION APAR DISCUSSES |
| SYSTEM HANGS ON 8590/95 W/IMAGE ADAPTER/A |
| WITH OS/2 2.0 AND ES/1 COMMUNICATIONS MANAGER |
| |
+-------------------------------------------------------------+
|
| REFERENCES:
| THE CONTENTS OF THIS APAR ALSO EXISTS IN
| HONE FLASH NUMBER 2153
|
|
|
+-------------------------------------------------------------+
| SYMPTOMS: |
+-------------------------------------------------------------+
|
|
|A SYSTEM HANG CONDITION MAY OCCUR IN ANY MODEL 8590 OR 8595
|WHEN INSTALLING AN IMAGE ADAPTER/A CARD IN A SYSTEM RUNNING
|OS/2 2.0 WITH EXTENDED SERVICES (ES) OR LAN SERVER (LS).
|
|THE SYSTEM HANG MAY ALSO OCCUR IF THE CUSTOMER IS INSTALLING
|ES OR LS IN A SYSTEM CURRENTLY RUNNING OS/2 2.0 AND USING
|AN IMAGE ADAPTER/A.
|
|THE HANG CONDITION WOULD APPEAR AS A BLANK DISPLAY WITH THE
|CURSOR BLINKING IN THE UPPER LEFT CORNER. THE DISKETTE DRIVE
|AND HARDFILE LIGHTS WOULD BE OFF.
|
|THE CURRENT IMAGE ADAPTER/A FRU P/N06G8223 AND BELOW ARE
|AFFECTED REGARDLESS OF THE AMOUNT OF VIDEO MEMORY INSTALLED
|ON THE IMAGE ADAPTER/A CARD. IMAGE ADAPTER/A OPTION DISKETTE
|VERSION 1.03 AND BELOW ARE AFFECTED. IMAGE ADAPTER/A DEVICE
|DRIVER DISKETTE'S VERSION 1.04 AND BELOW ARE ALSO AFFECTED.
|
|THE SYSTEM HANG IS CAUSED BY THE MISPLACEMENT OF COMMANDS IN
|THE CONFIG.SYS FILE DURING INSTALLATION OF EITHER THE IMAGE
|ADAPTER/A, ES OR LS.
|
+-------------------------------------------------------------+
| SOLUTION: |
+-------------------------------------------------------------+
|
|TO PREVENT THE SYSTEM HANG FROM OCCURRING, THE CUSTOMER OR
|APPROPRIATE PERSON RESPONSIBLE FOR THE SOFTWARE SHOULD
|FOLLOW THESE STEPS LISTED FOR THE APPLICABLE CASES BELOW:
|
+-------------------------------------------------------------+
|CASE #1 - OS/2 2.0 BASE IS ALREADY INSTALLED AND THE IMAGE |
| ADAPTER/A AND ES OR LS WILL BE INSTALLED. |
+-------------------------------------------------------------+
|
|1) INSTALL ES OR LS AS INSTRUCTED BY THE DOCUMENTATION THAT
| ACCOMPANIES THE PRODUCT.
|
|2) INSTALL THE IMAGE ADAPTER/A ACCORDING TO THE INSTRUCTIONS
| CONTAINED WITH THAT OPTION. WHEN OS/2 PROMPTS THE
| USER TO "REBOOT THE SYSTEM FOR THE CHANGES TO TAKE EFFECT",
| DO NOT REBOOT.
|
|3) RETURN TO THE OS/2 DESKTOP AND USING THE SYSTEM EDITOR
| (E.EXE), EDIT THE CONFIG.SYS FILE LOCATED IN THE ROOT
| DIRECTORY AS FOLLOWS:
|
| A. MOVE THE LINE: "DEVICE=C: OS2 XGARINGO.SYS" BELOW THE
| LINE THAT READS: "FILES=XX (WHERE XX=20, 30 OR ETC.)
|
|4) SAVE THE CONFIG.SYS FILE AND EXIT THE EDITOR.
|
|5) RETURN TO THE DESKTOP AND PERFORM AN ORDERLY SHUTDOWN OF
| OS/2. THE SYSTEM CAN NOW BE REBOOTED.
|
|
+-------------------------------------------------------------+
|CASE #2 - OS/2 2.0 BASE AND THE IMAGE ADAPTER/A ARE ALREADY |
| INSTALLED AND ES OR LS WILL BE ADDED. |
+-------------------------------------------------------------+
|
|1) INSTALL ES OR LS AS INSTRUCTED BY THE DOCUMENTATION THAT
| ACCOMPANIES THE PRODUCT.
|
|2) WHEN INSTRUCTED TO SHUTDOWN AND REBOOT THE SYSTEM FOR THE
| CHANGES TO TAKE EFFECT, RETURN TO "DESKTOP" AND EDIT THE
| CONFIG.SYS AS STATED IN STEPS 3 THRU 5 OF CASE #1 ABOVE.
|
+-------------------------------------------------------------+
|CASE #3 - OS/2 2.0 BASE AND ES OR LS IS ALREADY INSTALLED |
| AND THE IMAGE ADAPTER/A IS TO BE INSTALLED. |
+-------------------------------------------------------------+
|
|1) INSTALL THE IMAGE ADAPTER/A AS INSTRUCTED BY THE
| DOCUMENTATION THAT ACCOMPANIES THE OPTION.
|
|2) WHEN INSTRUCTED TO SHUTDOWN AND REBOOT THE SYSTEM FOR THE
| CHANGES TO TAKE EFFECT, RETURN TO "DESKTOP" AND EDIT THE
| CONFIG.SYS AS STATED IN STEPS 3 THRU 5 OF CASE #1 ABOVE.
|
+-------------------------------------------------------------+
|CASE #4 - TO CORRECT THE PROBLEM AFTER A HANG CONDITION HAS |
| BEEN ENCOUNTERED. |
+-------------------------------------------------------------+
|
|1) INSERT THE OS/2 2.0 INSTALLATION DISKETTE PROVIDED WITH THE
| OS/2 2.0 PRODUCT AND REBOOT THE SYSTEM. WHEN INSTRUCTED,
| INSERT DISKETTE 1 INTO DRIVE A:.
|
|2) AT THE "WELCOME TO OS/2" INSTALLATION SCREEN ON DISKETTE #1,
| PRESS ESCAPE TO EXIT TO THE A: PROMPT.
|
|3) CHANGE TO THE DRIVE PROMPT THAT OS/2 2.0 HAS BEEN INSTALLED
| (C:). ISSUE THE FOLLOWING COMMANDS THAT WILL REPLACE THE
| CONFIG.SYS FILE IN THE ROOT DIRECTORY WITH A BASE CONFIG.SYS
| FILE THAT WILL ALLOW OS/2 TO REBOOT.
|
| A. RENAME CONFIG.SYS CONFIG.OLD
| B. CD OS2 INSTALL
| C. COPY CONFIG.SYS C:
|
|4) REBOOT OS/2 2.0 FROM THE HARDFILE.
|
|5) WHEN THE SYSTEM HAS COMPLETED THE IPL OF OS/2 2.0,
| EXIT TO AN OS/2 FULL SCREEN OR WINDOW AND ERASE THE
| CONFIG.SYS FILE THAT WAS COPIED TO THE ROOT
| DIRECTORY. RENAME CONFIG.OLD TO CONFIG.SYS.
|
|6) USE THE OS/2 2.O SYSTEM EDITOR TO EDIT THE
| CONFIG.SYS FILE AS DETAILED IN STEPS 3
| THROUGH 5 IN CASE #1 ABOVE.
|
+-------------------------------------------------------------+
|OTHERWISE:
+-------------------------------------------------------------+
|
|IF THE SYSTEM HANG PERSISTS, VERIFY THAT THE
|ABOVE INSTRUCTIONS HAVE BEEN FOLLOWED AND UTILIZE NORMAL
|PROBLEM DETERMINATION PROCEDURES IF NECESSARY.
|
|THIS PROBLEM WILL BE RESOLVED IN FUTURE RELEASES OF THE IMAGE
|ADAPTER/A DEVICE DRIVERS.
|
+-------------------------------------------------------------+
|KEYWORDS: CMINFO 562121301 R100 CM |
| 8590 8585 IMAGE ADAPTER ADAPTER/A APDAPTERA A |
| IA A IA/A |
| SYSTEM SYSTEMS HANGS HANG WAIT STOP STOPPED |
| |
+-------------------------------------------------------------+
COMMENTS:
SEE INFORMATION ABOVE.
CIRCUMVENTION:
REPINNED RP92/08/14 'PIN' RHB/RALFS
92/12/17,UNKNOWN
REPINNED 92/12/17 RALFS/RHB