home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 12
/
CD_ASCQ_12_0294.iso
/
news
/
2386
/
hdtsv3
/
always.ctl
< prev
next >
Wrap
Text File
|
1993-01-18
|
3KB
|
123 lines
┌────────────────────────────────┐
│ Hard Disk Tech Specs(tm) v3.0 │
└────────────────────────────────┘
Hard Drive Solutions Family(tm)
//IN-2000
11
D62, 82, 75, 82
D75, 82, 75, 60
D75, 60, 62, 60
D62, 60, 62, 82
T75, 72, 0, 1, J1
C55, 80, 1, 1
T54, 83, 0, 1, J2
C37, 91, 1, 0
T42, 89, 0, 1, J3
T21, 89, 0, 1, J4
T20, 75, 0, 1, J5
T50, 82, 0, 4, Term. Term.
T53, 82, 0, 4, Term. Term.
T27, 89, 0, 1, SW1
{
Drives: 7 SCSI devices supported.
2 floppy drives (360KB, 720KB, 1.2MB, and 1.44MB).
Debug: C800:8 (or address if BIOS is relocated).
J1 External SCSI connector.
J2 Internal SCSI connector.
J3 Floppy connector.
J4 DC power connector.
J5 LED connector.
SW1 -1 Off (Default) BIOS address C:8000 - C:BFFF
-2 Off
On BIOS address D:8000 - D:BFFF
Off
Off BIOS address D:0000 - D:3FFF
On
On BIOS disabled.
On
-3 Off (Default) I/O ports 220 - 22F
-4 Off
On I/O ports 200 - 20F
Off
Off I/O ports 110 - 11F
On
On I/O ports 100 - 10F
On
-5 Off (Default) IRQ 15.
-6 Off
-7 Off
Off IRQ 14.
On
Off
Off IRQ 11.
Off
On
Off IRQ 10.
On
On
On IRQ disabled.
Off
Off
On DOS v5.00 support enabled.
On
On
-8 Off (Default) Asynchronous negotiation (normal for DOS).
On Synchronous negotiation enabled.
-9 Off (Default) Floppy controller disabled.
On Floppy controller enabled.
Terminators: Default is installed. If this is not the 1st or last
in a series of SCSI devices, or if in-line terminators
are in use, remove all terminating resistor packs.
}
*
//AL-4000
03
D86, 82, 95, 82
D95, 82, 95, 60
D95, 60, 86, 60
D86, 60, 86, 82
T95, 72, 0, 1, J1
C80, 80, 1, 1
T79, 83, 0, 1, J2
C55, 93, 1, 0
T60, 91, 0, 1, J3
T8, 91, 0, 1, J4
T77, 82, 0, 4, Term. Term.
T74, 82, 0, 4, Term. Term.
{
Drives: 7 SCSI devices supported.
2 floppy drives (360KB, 720KB, 1.2MB, and 1.44MB).
J1 External SCSI connector.
J2 Internal SCSI connector.
J3 Floppy connector.
J4 LED connector.
Note: There are no user-configurable jumpers on this adapter.
All setup is performed via software.
}
*