home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 15
/
CD_ASCQ_15_070894.iso
/
news
/
2527
/
chm312
/
readme.1st
< prev
next >
Wrap
Text File
|
1994-07-17
|
14KB
|
306 lines
<ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP> <ASP>
The following information is from the Table of Contents of CHM312.HLP,
the Application File included with the CHM312.ZIP package. It
summarizes topics used to demonstrate the versatile ASTRO 3
spreadsheet/calculator programs. This application file is read by the
program. Follow the instructions at the end of this file to get
started.
┌─────────────────────────┐
│╒════════════════════════╧╕
││ Application File ├─────────────────────────────────────
││ └──────────────────────────────────────
││
││ Interactive Problem Solving in
││
││ COMPUTATIONAL CHEMISTRY
││
││ Using the ASTRO 3 Team
││
││ Application File Version 3.12 03-01-1994
│
by P. DuBois Murphy, Ph.D.
(c) Copyright 1981, 1994 PC SuperComputer Capital, Inc.
All rights reserved.
╒══════════╕
│ CONTENTS └──────────────────────────────────────────────────────────
0.00 Table of Contents
SECTION TITLE PAGE│LINE
0.00 ... Table of Contents ................................... 1 29
1.00 ... Introduction ........................................ 3 102
2.00 ... About the ASTRO 3 Programs. ......................... 4 164
3.00 ... An Introduction to Calculations Using ASTRO 3 ....... 7 277
Programs.
4.00 ... Installing and Using ASTRO 3 Programs. .............. 9 394
5.00 ... MOLE FRACTIONS IN SO2 OXIDATION TO SULFURIC ACID ... 10 443
6.00 ... LANGMUIR ADSORPTION ISOTHERM ....................... 11 464
7.00 ... FLORY-HUGGINS FORMULA, VAPOR PRESSURE OF SOLVENT ... 11 488
ABOVE SOLUTION
8.00 ... NUMERICAL INTEGRATION .............................. 12 513
9.00 ... ROOTS OF QUADRATIC EQUATIONS ....................... 12 533
10.0 ... SERIES EXPANSION OF EXP(-X) ........................ 13 553
11.0 ... RADIOACTIVE DECAY EXPERIMENT, POISSON .............. 13 574
DISTRIBUTION
12.0 ... TEMPERATURE DEPENDENCE OF THE VAPOR OF ............. 13 598
O-TOLUIDINE, NEWTON-RAPHSON METHOD
13.0 ... PROTON CONCENTRATION (PH) IN AQUEOUS SOLUTION OF ... 14 623
WEAK MONOBASIC ACID
14.0 ... HEAT CAPACITY, POWER SERIES APPROXIMATION, ......... 15 646
SIMULTANEOUS EQUATIONS
15.0 ... ANALYSIS OF MASS SPECTROMETRY DATA: MIXTURES OF .... 15 673
ALCOHOLS, ITERATIVE METHOD
16.0 ... MIXTURE COMPOSITION BY ELEMENTAL ANALYSIS: ......... 16 699
SOLVING LINEAR SIMULTANEOUS EQUATIONS
17.0 ... ELECTROLYTE CONDUCTIVITY DATA: PREDICTOR ........... 16 723
EQUATION, NONLINEAR LEAST SQUARES FIT
18.0 ... DETERMINATION OF THERMODYNAMIC DATA FOR ............ 17 748
DECOMPOSITION PROCESS, NONLINEAR FIT
19.0 ... PREDICTION OF ACTIVITY COEFFICIENTS, NONLINEAR ..... 17 773
REGRESSION
20.0 ... Circumference of an Ellipse: Calculation by ........ 18 796
Series and Integration
21.0 ... Ideal Gas Law Calculations. ........................ 19 851
22.0 ... Statistical Analysis: Linear Regression and ........ 20 885
Correlation.
23.0 ... Useful Calculations for Problem Solving in ......... 21 950
Applied Physics.
24.0 ... How to Differentiate and Integrate An Equation: .... 23 1044
Commands D and G
25.0 ... Backsolving for Value of Independent Variable: ..... 25 1148
Commands S and U
26.0 ... Solving (If possible) Linear Simultaneous .......... 28 1274
Equations.
27.0 ... Solving (If possible) Nonlinear Simultaneous ....... 31 1383
Equations.
28.0 ... Finding Best Values of Transistor Parameters ....... 33 1506
from Experimental Data by Nonlinear Least
Squares.
29.0 ... Automatic Least-squares Polynomial Regression ...... 39 1780
(Linear Least Squares)
30.0 ... Glossary of Terms .................................. 43 1934
31.0 ... Product License and Warranty. ...................... 43 1971
32.0 ... Product Information and How to Order Complete ...... 45 2037
Package.
33.0 ... Order/Registration Form ............................ 46 2108
34.0 ... Instructions for Manually Installing Package. ...... 48 2173
35.0 ... Interested in Becoming the Author of Your Own ...... 49 2218
Interactive Application File?
36.0 ... Help File: Summary of File Viewing Commands ........ 50 2278
────────────────────────────────────────────────────────────────────────
Shareware Policy
────────────────────────────────────────────────────────────────────────
This file contains information for anyone who uses CHM312.ZIP. PCSCC,
Inc. will follow the published guidelines of the Association of
Shareware Professionals and will attempt to maintain its policies and
documentation consistent with their guidelines. Published guidelines
of the Association of Shareware Professionals will take precedent over
any current policies or documentation.
Shareware is "Try-Before-You-Buy" software, it is not free. We urge
all parties who distribute Shareware to help educate the public about
the true nature of Shareware distribution. Information on registering
can be found in the file REGISTER.DOC which is part of this package
(CHM312.ZIP)
Information on distribution of the CHM312.ZIP package can be found in
the file VENDOR.DOC which is part of this package.
Detailed information on licensing policies is found in the file
LICENSE.DOC which is part of this package.
A discussion of ASTRO 3 software products can be found in the file
ABOUT_IT.DOC which is part of this package.
────────────────────────────────────────────────────────────────────────
Product Description for AstroFormulaCalculator 3
────────────────────────────────────────────────────────────────────────
AstroFormulaCalculator 3 Product Description 01-07-1994
AstroFormCalc 3 is a unique and innovative mathematics tool
which offers productivity enhancements not found in any other
software package either retail or shareware. This hands-on
program combines the functions of both a spreadsheet and
calculator; but it is better. Why? Because it is right
between the two: Easier than a spreadsheet and more powerful
than a calculator. With its special format-free interface,
formula or equation-based iterations are much easier to set up
than in a spreadsheet. It is designed to be "smarter" which
makes it very user-friendly for Professionals of all levels,
especially for the infrequent or "computer-shy" user.
AstroFormCalc 3 should be your choice when the results of
calculations are most important, not the math!
Broad applications exist in many disciplines where calculations
with formulas, equations or other math recipes are required
such as in Economics, Genetics, Chemistry, Electrical
Engineering, Engineering Mechanics, Fluid Mechanics &
Hydraulics, Finance, Physics, Statistics and even Nursing.
Features include:
■ DOS or Windows as non-Windows application. Runs on all PC
compatibles. DOS 2.1+, Monochrome display, <256K RAM, floppy
or disk.
■ DOS command line support for any direct calculation such as
addition, multiplication, subtraction and division.
■ Format-free entry of up to 63 equations with at least 256
independent variables and 256 constants. Smart and
"hassle-free" interpreter.
■ Equations and formulas are written according to the BASIC
conventions. Versatile library of built-in functions.
■ Advanced calculator functions including many automated
numerical methods such as:
∙ Newton-Raphson for solving x in y=f(x)
∙ Advanced simplex for solving x at W=Y=Z... in W=f(x), Y=g(x),
Z=h(x)...
∙ Numerical integration (two methods)
∙ Numerical differentiation
∙ Finding maxima and minima
. Summation on integer index
∙ Plotting equations
∙ Saving/retrieving data files with full file management
support
∙ Screen dumps as DOS text files for inclusion in documents
■ Highly-structured documentation, on-line with Table of
Contents, Glossary and search function. Help file
is interactive with program.
∙ On-line helpfile. Comprehensive summary of
commands/functions with step-by-step examples on uses of all
advanced functions.
∙ On-line user manual. A "learn by example" document which
illustrates the universal nature of problem-solving with many
step-by-step examples from Science, Engineering and Finance.
■ Full support for ACTION21 and ACTION11 data sets.
■ Comments from users:
∙ "... calculate circuit board drilling and routing speeds...easy to
use, versatile and powerful with good documentation."
J. L. New York
∙ "...used the integration capability to determine defect density...do
not have any tool (either PC or host based) that does for me what
...(AstroFormCalc 3)...does."
J. R. Virginia
∙ "...for Electrical Engineering practice it is better than a
spreadsheet and a calculator..."
C. B. Florida
∙ "...used to do frequency spectrum work and calculations on circuits,
...of real value and a productivity tool."
E. S. California
∙ "...one of a handful of scarcely available packages...in the types
of numeric problems they solve."
W. C. Chile
This productivity-enhancing tool has been developed by the team at PC
SuperComputer Capital, Inc. Order the complete version of
AstroFormulaCalculator 3 today!
PCSCC, Inc. Dept. CHM
P. O. Box 173
Botsford, CT 06404 USA
Support ONLY, Call 1-203-270-9079
[Mar 1994] Prices subject to change without notice.
────────────────────────────────────────────────────────────────────────
Support and Arbitration Policies
────────────────────────────────────────────────────────────────────────
The author will remedy the deficiencies of the program in accordance
with the published guidelines of the Association of Shareware
Professionals <ASP>. The Support and Arbitration Policies can be found
in the on-line help files ACAL3HLP.HLP, ASOL3HLP.HLP or AFIT3HLP.HLP,
if available, which are accessed from the programs ACAL3.EXE, ASOL3.EXE
and AFIT3.EXE by the (F1) key.
────────────────────────────────────────────────────────────────────────
Manually Installing Instructions
────────────────────────────────────────────────────────────────────────
The following are minimal instructions for manually installing
ASTRO 3 programs.
■ Minimum distribution files: README.1ST, ACAL3.ICO, ACAL3.EXE,
ASOL3.ICO, ASOL3.EXE, AFIT3.ICO, AFIT3.EXE, CHM312.HLP and *.EQU
files. These files may be distributed in compressed formats such as
CHM312.ZIP.
■ Create a DOS directory named ASTRO3 and change to it:
cd\ (enter) md\astro3 (enter) cd \astro3 (enter)
■ Copy distribution file(s) into this directory.
■ If necessary, decompress CHM312.ZIP as follows:
pkunzip CHM312 (enter)
■ Add these statements to AUTOEXEC.BAT in the base directory:
∙ SET ASTRO3=C:\ASTRO3
∙ append to existing PATH statement ;C:\ASTRO3;
· reboot the computer (ctrl alt del).
■ Running Under Windows as a Non-Windows Application
Follow the installation instructions and install on the hard drive C.
Start WINDOWS (tm, MicroSoft). Click on FILE then click on PROPERTIES.
Enter the following information for each of the fields. Description:
AstroFormCalc 3, Command: ACAL3.EXE, Working Directory: \ASTRO3.
Click on CHANGE ICON. Enter Filename: C:\astro3\acal3.ico. Click on
OK to exit and click on OK to exit FILE. The AstroFormCalc 3 icon
should appear in the accessory window. Click on it to run ACAL3. At
"Get file" prompt type YES (enter) and at filename prompt type (end
esc) CHM312.HLP (enter).
────────────────────────────────────────────────────────────────────────
Running AstroFormulaCalculator 3
────────────────────────────────────────────────────────────────────────
■ To begin with the 'Computational Chemistry' application file, type:
cd\astro3 (enter) demo (enter) or CHM312 (enter)
■ To start from DOS with any Application Manual (ends in .HLP) like
CHM312.HLP, enter DOS commands:
cd\astro3 (enter) acal3 CHM312.HLP (enter)
■ To start from DOS with the ACAL3 on-line helpfile, enter DOS
commands:
cd\astro3 (enter) acal3 ? (enter)
■ To start from DOS with a listing of *.equ files in directory \ASTRO3,
enter DOS commands:
cd\astro3 (enter) acal3 \astro3 (enter)
■ To start from DOS with a formula like y=m*x+b, enter DOS commands:
cd\astro3 (enter) acal3 y=m*x+b (enter)
■ To start from DOS with a one-shot calculation, enter DOS commands:
cd\astro3 (enter) acal3 55.72+16.34+21.32-48.45 (enter)