DP Tool Club 15/CD_ASCQ_15_070894.iso/news/4583/anipnt60/bin2.fle

Text File | 1994-06-12 | 276KB | 7,134 lines

*************************** The Paint Studio *****************************

                        How to Use the Studio

The Paint Studio uses icons. Click mouse button 1 to get help on the
tool, activate the tool with mouse button 2. Esc or cancel will
bring you back to the screening room file area. See the rest of this
document for more information.

Lose the cursor? Click Both Buttons it will be homed.

Important! Wrong Palette?
Try Home Key then Both Buttons inside live active window,
(Picture's palette record is read), or above screen, window
closed (default current menu palette). (VCX carry palette info).
If you Zoom out, click on Color, then Click Both buttons on the picture,
the pictures palette is replaced in the file by the current palette.
To exit fast to the Screening Room.  ESC (not saved) or F2(saves first)
F3 Key to Clear Window with the L color.
If you are starting a new picture, always use the New Pic Icon #47 first.
This will create VCXTEMP.VCX (primary file), and
VCXTEMP2.VCX (secondary file). See New Pic Icon for more information.

 Load the Primary File by Clicking Button 2 on the left scroll
bar.(This is Redo when a VCX picture is active )

Load the secondary file by Clicking Button 2 on the bottom
scroll bar. (This is Undo when a VCX picture is active )

Autosave alternates between the primary and secondary after
each tool operation and may be disabled in CONFIGIT.

Override the settings with CONFIGIT or the AutoSave Icons or
F4 (Autosave On) or F5 (Autosave Off).
ALT-S save current screen. (or Click on Save Button)

********************* IMPORTANT! ******************************
Saving Files
~~~~~~~~~~~~
When the current on-screen work has been updated to the Primary VCX,
the word "Saved", will appear in the bottom left corner otherwise
, "Not Saved", will appear.

If you are learning how to use the program, disable Autosave using
Configit or F4. Use ALT-S to save changes to your work manually,
or turn Autosave on with F5 or Autosave Icons.

If you are working in 320x200 VGA mode full screen, the only way
for it to work properly is to turn on Autosave. With undo and
redo. The screen must be saved prior to the program redrawing the
Icons on the screen. Enable Autosave in CONFIGIT if it is disabled.

Autosave may write over your work. PCX originals are never altered
unless you save as a PCX and write over an existing file.
If you are doing important work, Use the Save Button or save as a PCX
whenever you want to save the file. Always work on copies and save
when you are satisfied.
If you load a VCX from disk, by default it writes over it when it
saves. (Autosave on It saves between each tool useage). Again work
on copies. As soon as you like what you have done use the Save
button to make a good copy. There are three Autosave options
1)Full Autosave   -alternates between the primary
and secondary file.
2)Undosave       -saves the secondary file.
3)Primary save   -saves the primary file.
If Autosave is disabled you are in scratch mode.
If autosave is disabled you must save manually.
Some Icons such as the Act2 Room, Cutting Room, Icon
Stamp Draw Room, etc.. do not save the screen prior to drawing
their menus if autosave is off. Use ALT-S before you do anything
drastic, like the F6 DOS Shell, if you are creating a picture.

In the Paint Studio, the window is normally closed. When you save
the picture, it is opened briefly, updated, then reclosed.
Open the Window by clicking on the scroll bars. The Paint Studio
uses 2 temporary files. One for redo, and one for undo.
ALT-S saves whichever file was opened last.
Text is never Altered by this program unless you delete the file.
You can draw all over any text help file or any other text file
but the program only saves graphic files. To save a screen of text
you must capture the window or an area as a picture using any of
the capture tools.
If you protect a file it will not open into a window. Load any
other file and choose unprotect. It unprotects all VCX and ANI
only. If you protect a text file, you must go to DOS and enter
the command attrib -r  filename.ext  see your DOS manual.

Important! You may have to load the file into a window prior to using
the Save Button to be sure you are saving the correct file.
The Save Button knows which file was opened last, but you may not.
Sometimes you must go to the Screening Room first and load the
file into a window before you can save it with the Save button.
If you get the message "This button only saves etc..." it is
because several types of files have been opened lately and it
is confused. Just go to the Screening Room and load the file
(like any other file, by clicking on the name in the file area)
You may now save it using the Save Button.

The Save Button updates the file first then makes a copy if you want.
Autosave(F5) or ALT-S or Undosave or Primary Save, save VCX files.

Example: ALT-S, what you see is saved.
        Click on the vertical scroll bar.
        If the changes are still there you have
        the correct file. If not, click on
        the horizontal scroll bar. If that is
        correct then you may want to make a copy
        to prevent ruining it.
        Or, click on Save Button, choose VCX, name the
        new copy.

Vertical Scroll Bar: Primary File
    Either VCXTEMP.VCX or the name of the VCX loaded
    from disk.
Horizontal Scroll Bar: Secondary File
   Always VCXTEMP2.VCX

F2 Key or ESC, OOPS! The Boss is comming.

   This program is configured for a two button mouse. Try the
Mouse Set Icon #93 to determine Right and Left Mouse Button
Setting. Depending on the user and your mouse configuration, left
button could be right and vice versa, for the sake of this and
other documents the Buttons are referred to as Button 1  and
Button 2 . The MOUSE BUTTONS Icon that appears in the help menu
has a 1 and 2 on the buttons and shows the current configuration.
Beneath it is the current process delay in milliseconds.

Important! A very fast computer with a 0 mouse delay will skip
           processes and could make operation difficult or impossible.

If this happens reset the delay with the Mouse Set Icon. If this
cannot be done, then delete C:\ANIPAINT\FILECFG.KEY and it will
be replaced. Then set the delay using CONFIGIT. The Mouse Set Icon
writes to FILECFG.KEY and takes precedence over CONFIGIT.

I am partial to using the Right Mouse button as the Action button
in graphic applications and have designed this program this way.
In a text application the left button ususally means "enter"
I use the right button primarily as "action" because enter
does not properly relate to graphics.
Which configuration seems the most natural for you is the one
you should use. It is then a matter of practice before it becomes
an automatic process for you. Use CONFIGIT.EXE to test the
mouse delay. It is critical to proper operation of the program.
In the pop up menu of help an Icon appears showing the current
mouse button configuration. (1 and 2, or 2 and 1)

 The Studio uses Icons to represent the tools that are
 available for your use.

 Key Functions
 ***************


 The Cursor Keys Alone    or   CTRL-L or R Cursor
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Scroll Window Contents 1        Scroll Window contents 40

The PgUp and PgDn Keys
~~~~~~~~~~~~~~~~~~~~~~~
Scroll window contents 40 pixels or 1 page up and down

The Home Key
~~~~~~~~~~~~
Homes the current document.

Note: Some of these keys are only available in the Paint Studio with
      the window closed.
The F1 Key
~~~~~~~~~~
Help
The same help that is available in the upper right hand corner.

The F2 Key
~~~~~~~~~~
Instantly blank the screen to grey, and save the picture while
masked. Then you are brought back to the File Screening Room and
the picture is Flashed to notify you that the Picture has been
saved under it's current name. Most probably a temporary VCX
eg:VCXTEMP.VCX or VCXTEMP2.VCX on D: if available C: if not.
Text Files are not altered.

The F3 Key
~~~~~~~~~~
Clear the current window using the current Left Color.

The F4 Key
~~~~~~~~~~
Turn Autosave Off (Bottom scroll bar is undo).

The F5 Key
~~~~~~~~~~
Turn Autosave ON (Alternates saving between Primary and Secondary).

The F6 Key     DOS Shell
~~~~~~~~~~
The F7 Key     Paste the Current Clip
~~~~~~~~~~
The F8 Key     Menu Colors
~~~~~~~~~~
The F9 Key     Load the current Clip into a window and make it
~~~~~~~~~      the current VCX.
The F10 Key    Exit
~~~~~~~~~~~~
The Esc key
~~~~~~~~~~~
Exit the current process in progress.
If there is no process underway then you are transported back to
the File Screening Room . The current picture stays as it
appeared during the last undo or redo or save operation.

The Space bar
~~~~~~~~~~~~~
Interrupt the current tool or Icon process.

ALT-A     Capture 320x200 top left corner
~~~~~     (full screen FAST320x200VCX ACT2 animation frame)

ALT-C     LOAD CLIP ART
~~~~~
ALT-E     LOAD POP UP CUT & PASTE POLY MENUS
~~~~~     (ACT2 anywhere animation)

ALT-F     Full Screen Off/On Toggle
~~~~~
ALT-L     LOAD PRIMARY FILE   (redo)
~~~~~
ALT-P     Paste POINTS.PNT onto the screen without window.
~~~~~
ALT-Q     EXIT
~~~~~
  R       Run TEMPVEC.RUN stick figure animation without window.
~~~~~
ALT-S     SAVE Current VCX
~~~~~
ALT-U     LOAD VCXTEMP2.VCX   (undo)
~~~~~
ALT-X     EXIT
~~~~~~

In a Window these Keys are Valid
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The F7 Key     Paste the Current Clip
~~~~~~~~~~
The F8 Key     Menu Colors
~~~~~~~~~~
The F10 Key    Exit
~~~~~~~~~~~~
The Esc key
~~~~~~~~~~~
Exit the current process in progress.
If there is no process underway then you are transported back to
the File Screening Room . The current picture stays as it
appeared during the last undo or redo or save operation.

The Space bar
~~~~~~~~~~~~~
Interrupt the current tool or Icon process or close window.

ALT-A    Capture 320x200 ACT2 Animation Top Left
~~~~~
ALT-E    Cut & Paste Menu
~~~~~
ALT-I    Zoom In   ( If using Full Screen use this to zoom in).
~~~~~
ALT-O    Zoom Out  ( If using Full Screen use this to zoom out).
~~~~~
  R     Run TEMPVEC.RUN stick figure animation without window.
~~~~~
In the Screening Room, press P to go directly to the Paint Studio.

Printing with SHIFT PRINT SCREEN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Use F6  (Dos Shell)
2) Enter the DOS Command:  GRAPHICS
3) Type  EXIT to leave the DOS SHELL
4) Choose Full Screen Icon
4) Press SHIFT and PRINT SCREEN at the same time.
 (The Dos Shell may return to default resolution, you may have to
  switch back to the correct mode that you used to make the picture.)
If your printer is on and ready it prints the screen.
It only supports 320x200 mode in 256 colors.
To Print in 640 x 480 you must switch to 16 color mode.
Read your DOS manual for more information on the
GRAPHICS command and your GRAPHICS.PRO file in your Dos path.

A FAR BETTER way to PRINT is to EXPORT as a PCX and use your
favourite printing program to print it. Your printing program
must be able to read PCX files. Most good Word Processors
can load a PCX for printing alone or in a document.
If you have a Fax Card, your FAX software may support PCX.
Print to a fax for laser quality without a laser printer.
See your printing program documentation.
Use the SAVE Button to save as a PCX.
See SCREENRM.DOC for information on Exporting PCX.
See PRINTQ&A.DOC for more info.

Understanding Color           Very Important!!
~~~~~~~~~~~~~~~~~~~
This program uses 256 colors. These colors are called the
palette. A standard  VGA  or SVGA monitor can display a maximum
of 256 colors on the screen at one time. VGA in 320 X 200
resolution only.
This program is designed for a SVGA display with resolution
capabilities to 1200 X 1024. Providing your video card is capable
and compatible with the available display drivers it will serve
you well.
640x480 256 color resolution is recommended.
Each dot or pixel on the screen can be one of 256 colors at any
one time. A graphic picture is made up of these tiny dots like
multicolored lights. Make a blue line, you are turning on a
stretch of blue lights.

Each color is made up of a red value, a green value, and a blue
value. The higher the red/green/blue values the brighter the
color becomes. The lower the red/green/blue value the darker the
color becomes. Pure white has a red value of 255, a green value
of 255, and a blue value of 255. Pure Black has red, green and
blue values of 0.

When you load a PCX picture made by a color scanner or another
program, the colors that make up the picture are contained in
palette information within the file.  Whenever you load a PCX
file, the palette is loaded along with the picture. However this
can pose a problem because all screen colors are affected
including the menu and Icon colors.

If the PCX picture had an all black palette the screen would
become all black leading you to believe a crash had occurred.
Press F8 to reset to menu color.
Many programs including this one must safeguard against this in
some way. I have done this by reserving black and white for menu
use. Other programs reserve the first 8 and the last 8.
When the picture is first loaded it is in it's pure form for
viewing. If the palette is a poor mixture of lousy color, so be
it. If the screen goes black, press F8 to reset color or
press escape to exit process,  or move the mouse
(invisible if black) over the top of the screen and click both
buttons. The default palette will return. ( the current menu
palette is the default)
When you are in a graphic window you have the option of changing
the palette with the color button. It has a maximum of palette
choices as determined by your configuration file.
( See CONFIGIT.EXE to change the maximum number of menu
palettes.) Palette choice 1 or Color 1 is the unaltered palette
that was in the last file when it was loaded into the
program. If nothing happens but a click when set at 1 it is
because there is no current VCX or PCX available to reset the
palette to. No problem.
Color 2 is a grey version of palette 1. This grey version may not
be scaled. Meaning the colors may not get brighter as the color
numbers (0...255) get higher. Color number 60 may be darker than
color number 6. To change the image to a greyscaled image (color
gets brighter as the color number gets higher) you must choose
the Grey Scale Icon to convert the palette and picture, or Sort
Color. ( see Grey Scale )

Many of the tools in the Studio work better on a greyscaled
image. Scatter and Blend just to name two. You will find out
which by experimenting with the tools and alternating between a
greyscaled palette and a normal palette. A picture that looks
totally scrambled could look photographic with the correct
palette.
If you leave the window controls to start work on the picture you
may see the picture change. The Paint Studio reserves white and black
for it's Icons. The original palette from the PCX file may have color
number 0 ( black) and color number 255 ( white) as the same
color. If Studio did not alter these two palette colors the
colors in the Icons may appear to be all white and indiscernible
or all black or all green or whatever. If you can't see the Icon
you don't know which tool does what.
Some pictures will have no noticeable effect when white and black
change, others will drastically change.
If a drastic change occurs the image will not look right.
To correct this you can choose the Swap Color Icon to correct the
picture (see Swap Color Icon ) or use the Pencil Eraser( see
Pencil Eraser) or override the changing of white and black.

To override the Studio's need to reserve color 0 as black
and color number 255 as white, click on the color button while in
an active graphic window. The color button will be incremented by
one. You may then cycle through all the palettes back to Color
palette 1 or use the opposite mouse button. Once you have pressed
this color button you automatically override the Studio. It will
not alter the palette when you leave the window and enter Studio
controls.

Remember !
Both buttons above the top of screen - default menu colors. Click
on the color button in a graphic window - override palette
change.
Bad Palette in PCX - F8 to reset to menu color.

Color problem # 2.

 Example: PCX picture (A), a lovely yellow flower with 256 colors.
          PCX picture (B) a blue humming bird also 256 colors.
          Each uses all available colors, 256, the maximum number that
          you can display onscreen at one time. But you want to paste
          the bird on the flower and animate it. If you use the one
          palette then the other picture will become scrambled.
          Remember, the palettes are not in numerical order.
  The screen can display only 256 of a possible 65000+ colors!
  Most paint programs attempt to map the 2nd colors onto the first.
  This rarely works. Especially if the first palette is
  predominantly shades of one color. Such as the yellow flowers
  palette example above.

You could reduce the first image to 16 colors, capture the
16 colors of the palette and save both. Then reduce the second image
to 16 colors. Then use the shade poly or light/dark Icon to
increase the color numbers of the pixels of the image lighter
by 16 colors. Then capture those 16 colors of the palette,
paste both palettes together and paste both images on a page.
However you lose picture quality on both. And what happens when you
try to paste both on scenery. Do you reduce them again and again.

The easiest solution is to greyscale both images. It's a little
bit like black and white T.V. as opposed to Color T.V. but it
works. Once the image is greyscaled you can use any scaled
palette. To do this use the Grey Scale Icon.( see Grey Scale) If
you plan to create an animation sequence that uses photograph
quality PCX images then greyscale the image first. Use the Sort
color Icon to allow better use of the tools such as Blend.

If you are creating your own drawings, choose a menu palette to
suit your needs. Most of the Menu Palettes are partially scaled
as a compromise containing the primary colors and shades of one
color.

Once again, Bad Palette -Both mouse buttons over top of screen.
            Combining Photos-Greyscale the images.

 The Clip Count Number
 ~~~~~~~~~~~~~~~~~~~~~
 Located on the far left of the color bar, this number determines
what the name of the current Clip Board (CLP#.VCX) is or will
become. The next time you capture an area using any of the
capture tools this number will be incremented by one prior to
naming the file.

Example: The number is 1. You use the Cut and Paste button.
         The Clip Count is increased to 2 and the
         captured area is automatically named CLP2.VCX
         and saved to D:\CLIPS if D: is available or
         C:\ANIPAINT\CLIPS if not.
note:CLP0.VCX is used by the Program internally.

If you wish to overwrite the captured file, click button 1
on the clip count area and it is reduced by one.
Then repeat the cut and paste. Again the number is
automatically incremented and the captured area saved.

When creating animation that is (320x200) the clip count is
incremented by 20 the first time, if the count is less than 20
when you begin. This is intended to segregate the CLP#.VCX files
you are using for ACT2 animation and the normal clip
board files you are using as scratch pads.
When you test run your ACT2 animation sequence the first frame
will run from the clip count number you set. When it reaches the
last frame number as set by the Size number on the extreme right
of the color bar, the animated sequence will again start at the
current clip count number.
To load CLP0.VCX or to set the number to 0 use the Clipboard
Icon. Set the Clip Count number to 1 then use the Clip Board Icon
with the -1 on it. If the Count is 0 the captured image will be
CLP1.VCX.

See Animation for more information.

Remember this number is the Clip Count number and is used
extensively throughout the program.
Very Important!: CLP#.VCX files are temporary files. And
vulnerable to being overwritten at any time. To prevent this from
happening, Save it under a different name by loading it into a window (F9)
or using the Paste Window Icon and then using the Save button.

   The Color Bar
   ~~~~~~~~~~~~~
  Change the drawing color by clicking button 2 on the color bar.
If sound is on you will hear a click. The color will appear in
the Right color area to the extreme right of the color bar. At
the top right the Right Color Number (0..255) also appears.
Now when you draw the outline color will be this color.


  Change the fill color by clicking button 1 on the color bar. If
sound is on you will hear a click and the color will appear in
the Left color area to the extreme left of the color bar. At the
top left the Left Color Number (0..255) also appears.
Now when you paint the fill color will be this color.

Press the scroll button above and to the left of the Color bar
and the color scrolls. Button 1 scrolls left, button 2 scrolls
right. The scroll button above on the extreme right has the same
function.

The default palette uses a combination of colors. The default
palette Color 0 should be black. Color 255 white. When you
first load Studio a 0 appears on the color # 0.  You may change
the default palette with the Menu Color Icon.
Run CONFIGIT.EXE to add a saved palette to the program menu.

You may also change the current draw and fill colors by
clicking button 1 or button 2 anywhere below the color bar.

The current draw and fill colors are also used by other Icons.
Some Icon buttons have options that can exclude colors from their
process.

Example: Paste No Color #0. Suppose you want to paste a clipped
area into your picture. If the clipped image has a black
background you will not paste the black background of the clipped
image onto your picture. If you want to paste the background then
make the background another color other than color #0 or make
another color number black using the Painters Palette Icon. Avoid
drawing with color #0 because it is used for invisible
backgrounds.

See Understanding Color for more information on color.
Only by practice will you learn all the effects that color has on
each Icon button that uses color.

The LEFT or Fill Color Area
~~~~~~~~~~~~~~~~~~~~~~~~~~~
   The area to the left of the color bar is the fill color area.
The clip count number is also located in this area.
The small sliver of color on the extreme left is retained for a
short period to allow you to switch back to this color if you
want to. The Fill Color area shows you which color is currently
the fill color for use with painting tools.

 The Right or Draw Color Area
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   The area to the right of the color bar is the draw color area.
The Size number is also located in this area.
The small sliver of color on the extreme right is retained for a
short period to allow you to switch back to this color if you
want to. The Draw Color area shows you which color is currently
the draw color for use with drawing tools.

The Size Number
~~~~~~~~~~~~~~~
   Whenever the program needs to know the size of brush or box or
line thickness you want to use. It gets this information from
this number.

Example: You click on the paint brush Icon. The cursor it uses is
a rectangle. It determines how large a brush you want to use by
the Size number. The size number is currently set at 10.
It creates a rectangle cursor 10 dots wide 10 dots high. When you
paint you will paint an area 10 X 10 each time you press button 2.

The Size Number is initially set at 10. By clicking button 1 on
the number, it decrements the size number by one. Click button 2
on the number, it increments the number by 1. Click to the right
of the number and it increases and decreases by 10's.

Almost every Icon Button uses this number for something. Mainly
it determines the size of the cursor box and hence the size of
area that the selected Icon Button will affect.
When you are previewing ACT2 animation it determines the last
frame you wish to preview from the Size Number. When you are
setting the frame delay using the frame delay clock button, it
uses the size number.

Remember the number on the right is the Size Number. It is used
extensively throughout the program.

Only by practise will you learn the effect the size number has on
each Icon Button. See each specific Icon for how they use the
Size number.

The Upper Scroll buttons
~~~~~~~~~~~~~~~~~~~~~~~~~
Use the Upper scroll buttons to scroll the Icons in the Icon Bar.

 The Icon Bar
 ~~~~~~~~~~~~~
 Click Button 2 on the Icon to activate the Icon.
 Click Button 1 on the Icon to see it's Icon number.
 Click Both Buttons on the Icon to get help from this file.

Important! Every Rectangle cursor:
gets wider when it moves past the active window to the right,
gets thinner when it moves past the active window  to the left,
gets shorter when it moves above the top and longer when it
moves below the active window.
   Even if there is currently no window mechanics visible.
If there is no active window it uses the last window dimensions.
You may find this annoying at first, but when you learn how to
use this feature effectively, you will find it a real handy tool
and time saver. Instead of exiting the current process and using
a trial and error method of sizing the cursor by Size Number,
you will learn to move in an arc from left outside to top
to shrink the cursor and move in an arc from bottom to right
to enlarge the cursor box. The size of the cursor box determines
the size of area the tool will affect.

Grow boxes and the various other cursors are not affected by
this feature.

 The remainder of this help file is arranged in the order that
the Icons appear, the first Icon being on the far left to the
last Icon on the right. Number 1 is reserved for future use.

#2   Alter Entire Palette
     ~~~~~~~~~~~~~~~~~~~~
  This button is used to add Red Green or Blue to the palette.
All colors on the screen are affected. If you want to save
the changes use the Save Button and choose Palette.

Button 1 to decrese color.
Button 2 to increase color.
Both Buttons to exit the process.


#3 Copy and Paste Parts of the Current Palette
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Select the Left Color Number
2)Select the Right Color Number
3) Select Cut Paste Palette
A menu appears with 2 options
option 1: Copy colors from Left Color to Right Color
option 2: Paste into current palette starting with the
currently set Left Color #.

TEMPMENU.PAL becomes the partial palette file
containing only the colors from the Left Color Number
to the Right Color Number.
Choose the SAVE Button to save the combined palette.

#4  The Palette Color Files
    ~~~~~~~~~~~~~~~~~~~~~~~
  Press this button and you are transported to the Screening Room
to retrieve a palette. When you have selected one you will be
returned to the Studio. As soon as you click on a file name with
the extension PAL the colors will change. Palettes are usually
kept in the Palettes directory. If in the Screening Room you
can't change to Files or Change directories, then press Cancel
first.

#5  The Pencil Eraser     Color Replacer
    ~~~~~~~~~~~~~~~~~
Set the Size number at the desired cursor size.
Set the Left or Fill color to the color you wish to replace.
Set the Right or Draw color to the color you wish to change the
Left to.

Move the cursor over the area in the picture containing the color
to replace and Click button 2. The fill color that is within the
cursor rectangle is changed to the draw color.
(floodfill tools sometimes flood over the wrong areas, so for
a safer color fill use this tool).

#6  The Painters Palette
    ~~~~~~~~~~~~~~~~~~~~
Click button 2 on the color bar or click with the mouse cursor
directly on the picture, to choose the color you wish to change.

Then click button 2 again on the color you wish to add just as a
painter would mix color on a palette board. You may pick color
from anywhere on the screen.
To undo the color, click several times on the original color on
the color bar. It will revert back. Or reload the palette.

When you are satisfied, click Both Buttons to exit the process.
Experiment with it to see how it works.
The color values are reported on the top of the screen
for reference. Keep in mind they are only relevant to
the current palette.
Three buttons labled red green and blue add amounts of these
colors. The results are immediate and the picture is instantly
changed. To save the changes, press the Save button and choose
Palette. Use the Picture Color Icon to write new palette info to
a picture file. To turn a saved palette into a menu palette name
it MENU#.PAL or 16MENU#.PAL for 16 color mode, where # is the
next available menu palette number, then increase the maximum
palette number in the Options menu of CONFIGIT. Look at the
files in C:\ANIPAINT\PALETTES to determine the next palette
number.
#7 Reduce Color in the current VCX
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A window menu pops up with 2 options.

Option 1: Reduce range of color

All color beginning with the Left Color Number and
ending with the Right Color Number will be changed
to the Right Color Number when you answer Yes.

Option 2: Convert 256 color bitmap to 16 colors

Reduces the color but maintains the color balance
by greyscaling first, then reducing to 16 colors.
256 color PCX are automatically processed this way if
you are in any 16 color mode, but this is the way to
reduce a 256 color VCX to 16 colors.


#8 Menu Colors
   ~~~~~~~~~~~~~
1) Button 2 Menu Palette Choice is incremented by one.
When it reaches the maximum palettes number it repeats.
Set maximum by running CONFIGIT.EXE;
Menu palette names are MENU1.PAL ...MENUmax#.PAL.
To add apalette to the menu palettes list,
1)Save your new palette as the next available palette number.

example: THe current number maximum palettes is 15

Name your new palette C:\ANIPAINT\PALETTES\MENU16.PAL
for 256 colors or
C:\ANIPAINT\PALETTES\16MENU16.PAL for 16 color palettes.
2)Then run CONFIGIT.EXE and increase the maximum palettes number in
the Options Menu to 16.

Select the Menu Colors Icon to make a palette current, then every
time you click BOTH BUTTONS ABOVE THE TOP OF THE SCREEN, THE SET
MENU PALETTE RETURNS.

#9  Swap Color
    ~~~~~~~~~~~~
Works the same way as the Pencil Eraser only, for convenience it
affects the entire file, if it is a VCX.  Use the Eraser Icon if
not.
1)Set the Left or Fill Color - Color to replace.
2)Click on the color - The color is completely replaced in the
entire file including any part not currently visible.
This is the easiest way to create a White Page.
1) Choose New Pic to create a blank black page.
2) Set the Right Color as the desired page color.
3) Click on Swap Color Icon then Click on the page.
Button 1 to exit the process.

#10  Grey Scale      Important Icon !
    ~~~~~~~~~~~
If you haven't read Understanding Color above, do so now.
For best results follow these steps.
1) Load a PCX or VCX  file from disk.
2) Click on Grey Scale.

This button first sorts the palette then it converts the
image in the window from VCXTEMP.VCX to GREYTEMP.VCX on
drive D: if available or C: if not.
Pasting files loaded from disk onto existing pictures
works best when the images have first been greyscaled.
In this way they have a common palette.

Greyscaling a full color image will allow you to use some tools
that otherwise will not work effectively.
Scatter, Blend and Light/Dark for example. These are very useful
tools.

Once an image has been converted (greyscaled) you can use any
scaled or sorted palette, so switching palettes is a breeze.
If the palette is not greyscaled or sorted the image will
look incorrect. All pictures are made up of color values that
are only relevant to their palette record.

If you try to sort a scrambled image it will not be corrected. If
the image is not correct before you sort it, it will not be
correct after it is sorted. Try another palette instead.

The original PCX is unchanged and either is VCXTEMP.VCX.
If you want to undo the process, reload the original PCX or VCX
or click on the bottom scroll bar (Undo).

#11,#12,
#13,#14,
#15,#16,
#17,#18
~~~~~~~~~~~~~~~~~~~~~~~  Important Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This group known as the Pixel Movers are invaluable tools for
animation. They all move pixels in the direction of the arrows
shown on the Icons except the last one in the group.
When the last one is toggled on it excludes the Fill and Draw
colors from the process.
Easiest form of animation.
Example: During Act1 or Act2 animation processes.
         Save frame 1.
         Use pixel mover.
         Save frame 2.
         Play back and affected area appears to move.
One of many innovative ideas.

            #11  Down and to Left.
            #12  Down and Up to Left.
            #13  Down and to Right.
            #14  Up and to Right.
            #15  Down.
            #16  Up.
            #17  Right.
            #18  Left

#19  Exclude Color Pixel Mover Toggle.
   When this button is on, two bars appear on the Icon.
   Left is the Fill color, right is the Draw color. Both
   will be excluded when you use any of the pixel movers.
   If you want to exclude only one color make Draw and
   Fill colors the same.

Suppose you had a red, green and blue object on a yellow
background. Choose red as the Fill color by clicking button 1 on
red.
Choose blue as the Draw color by clicking button 2 on blue. Then
use any of the above Pixel Movers.
Only the green and yellow would move.
Experiment to see how it works. Very handy for animation.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#20  Gradient Draw        (Greyscale)
~~~~~~~~~~~~~~~~~~~
 Use this button to add a distance effect, shade lines etc..

 1) Set Size Number.
 2) Choose Fill color.
 3) Choose Draw Color.
 The effect begins at the Fill color and
 and increments color until it reaches the Draw color.

 Press button 1 and move in a horizontal direction.
 Press button 2 to exit process.

A curious illusion of distance occurs when the color
range is shades of blue.

Experiment to see how this Icon works.
Try using it on a picture, then changing colors and
going over the same area. Works best in 640x480 256
color mode.

#21   Grow Rectangle Draw
~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Draw color.
2) Press Button 2 to anchor first point.
3) Hold button 2 and move to draw.

Could be useful for drafting or other line drawings.

#22  Gradient Grow Rectangle Draw     (greyscale)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1) Set the Draw color.
2) Set the Size Number to determine delay of color change.
 If set to  1, it changes quickly to next color, if set to
 100 it will draw many rectangles prior to changing to the
 next color.
3) Press Button 2 to anchor first point.
4) Hold button 2 and move to draw.
Button 1 to exit process.

The gradient feature adds a 3 dimensional effect
to line drawings when working with a scaled palette.

#23  Rectangle
~~~~~~~~~~~~~~
1) Set Size Number.
2) Choose Draw color.
3) Button 2 to draw.

Button 1 to exit process.

Draws a box the size of the Size Number.
Grows and Shrinks on edges.

#24 Filled Rectangle
~~~~~~~~~~~~~~~~~~~~
1) Set Size Number
2) Choose Fill Color.
3) Choose Draw color.
Button 1 to exit process.
Draws a Filled Rectangle.
You may set the fill style with the FIll Style Icon
prior to choosing the fill color.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Special Pair! ~~~~~~~~~~~~~~~~~~~~~~~~
#25  Blob Draw      greyscale optional
~~~~~~~~~~~~~~~~~
1) Choose the draw color.
2) Choose the Fill style and Color.
3) Button 2 draws a filled blob.
4) Button 1, Gradient fill towards centre.
Move the mouse at the same time and the blob moves as it draws.

Both buttons to exit process.
Has a 3 dimensional effect when using a scaled palette.

#26  Son of Blob Draw      greyscale or partially scaled palette
~~~~~~~~~~~~~~~~~~~~~
A tool for the imagination. Use it to get ideas for drawings or
to add scenery, (3d rocks etc..) or for shade or shadow.

1) Set the Size Number (magnetic sensitivity 30 min)
2) Choose the L (Fill) color.
3) Choose the R (Draw) Color.
4) Button 2 draws lines.
5) Button 1, Gradient fill towards centre.
Move the mouse at the same time to guide the gradient and fill the
blob. The lines move magnetically towards the cursor.
6) Button 2, draw more lines.
The gradient effect is from the L color to the R color.
Both buttons to exit the process.
Has a 3 dimensional effect when using a scaled palette. Creates
gradient images, curves, shadows, etc.

#27 Air Brush Spray Paint     Gradient optional
~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Size Number
2) Choose Fill color
3) Button 2 start the sprayer.
Important!
Each time you press Button 2 the color is increased
by one.
Each time you press button 1 the color is decreased
by one.

if you want only one color press button only to activate.

Press both buttons to exit procedure.

Real nice for shading and graphic art.

It takes a bit of practice to master.

#28 Paint Brush
~~~~~~~~~~~~~~~
1) Set Size Number.
2) Choose Fill style and color.
3) Button 2 paints area in cursor box.

Button 2 to exit process.
The same as Filled Rectangle only has no outline color.

#29  Pencil Draw     greyscale optional
~~~~~~~~~~~~~~~~~
1) Select Size Number.
2) Select Draw Color.
3) Button 2 to draw lines free hand.
Button 1 to exit process.
If the L color is Less than the R color it increments towards
the arrow one way and the opposite if L color is Greater than
the R color.
Draws with Size # of lines +1 deep at a time. The line
below and each consecutive line will have a color
decremented or incremented by 1.
In other words it gets brighter towards the top or bottom of
the line. Giving a gradient effect.


#30  Sketch Draw  greyscale optional
~~~~~~~~~~~~~~~~
1) Select the Size Number.
2) Select Draw color.
3) Select Fill color
4) Button 2 anchors point and draws lines.
5) Button 1 moves anchor point.

Both buttons to exit process.

One of my favourite buttons for drawing.

When the Size Number is greater than 1 it will
draw Size # of lines deep.
If the color number of the Draw color is
Greater than the color number of the Fill Color it will
decrement the color by 1 .

If the color number of the Fill color is
Greater than the color number of the Draw Color it will
increment the color by 1 .

If the Fill color is the same as the Draw color it
will neither increment or decrement the color.

Draw > Fill, Color - 1
Fill > Draw, Color + 1
Or in other words, the color changes from the Draw color towards
the Fill color.
Draw = Fill, Color remains the same.

This button takes a lot of practice to master. Also makes a good
eraser. Experiment with it to see how it works.

#31  Point to Point Filled Polygon Draw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Choose the Draw color
2) Choose the Fill Color
3) Button 2 to draw lines from point to point.
4) Both buttons fills the polygon with the
   current Fill style and color.
   Button 1 exits the process.
Important!! A fast way to erase an area.
1) Choose the Draw and Fill colors as the
   background color of your picture.
2) Outline the area.
3) Both Buttons to fill the area with
   background color. Erase complete.

note: Maximum of 6000 points to ensure memory
      compatibility. That's plenty. If you need more reselect.

#32 Angle Pencil Draw     greyscale optional
~~~~~~~~~~~~~~~~~~~~~
1) Select Size Number.
2) Select Draw Color.
3) Button 2 to draw lines free hand.
Button 1 to exit process.
If the L color is Less than the R color it increments towards
the arrow one way and the opposite if L color is Greater than
the R color.
Draws with Size # of lines +1 deep at a time. The line
below and each consecutive line will have a color
decremented or incremented by 1.
In other words it gets brighter towards the arrow on the cursor,
giving a gradient effect.

#33 The Vector Icons
~~~~~~~~~~~~~~~~~~~~
When you click on this Icon you load the Vector Set of Icons
that write to a file in a different way than the other Icons.
The other Icons treat the page as a picture made up of pixels,
accounting for each one. The vector tools, on the other hand,
treat the page as a series of lines connecting points.
The Vector tools write files ending in PNT or RUN.
The PNT files can be edited in a PNT window, and the RUN files
can be manipulated in a RUN window. Whenever you load a file
in the Screening Room, it automatically selects the correct window
for the file based on these 3 letter file name extensions.
The vector tools write at the current zoom and position as set by
the zoom button in an open Vector window.

The Vector Icon numbers are preceded by a V.

#V1 Stick Figure Animation  ( *.RUN )
    ~~~~~~~~~~~~~~~~~~~~~~
Use this Icon to create a stick figure animation for demonstrating
or studying human movement. (Sports, Dance, etc.)
The line color in the file is determined by the Right or Draw
color. When you first click on this Icon the figure is xorput
onto the page. Because of this the color interacts with the
background color instead of writing over it. Therefore the color
will not appear the same on a red background as it does on a
black background. If you are using a black background the color
of the stick figure will appear as the same color on screen
as in the file. If you can not see the stick figure at all
it is because it is the same color as the background.
As an example, set the Draw (right) color to 34 with a black
background. With Menu color 1, the figure will appear pink.
When you have created a sequence and play it back it will
appear pink as well providing the background remains black.
When you choses the Thicken Lines Option in the window, it will
increment the color by 1 in one direction and decrement the
color 1 in the other direction. The total color spread is ten.
Therefore, in this example the thickened figure will range
in color from 29 - 39.
To create a moving stick figure file ( *.RUN) do the following.
1) Set the Left Color to 0 and press F3, this clears the screen.
2) Set the Right Color to 34.
3) Click on the Figure Icon.
4) Choose One Figure or Two Figures animated at once, then press OK.
5) Click Both Buttons at the same time, this saves the first
   frame to TEMPVEC.RUN on D:\ if D: is available or C: if
   not, creating it or appending to it if it already exists.
   ( to start a new sequence, delete the old TEMPVEC.RUN)
6) Press and hold Button 2 on a line intersection or end point
   and move the mouse. This drags the line.

7) To move the entire figure, use the arrow keys or PgUp or PgDn . CTRL+
  the arrow keys moves horizontaly ten pixels.
  If you use Two Figures,the End Key toggles between the Left Figure and
  Right. When the toggle is on one figure will move and when it is off
  the other figure will move.
Press Insert on the keyboard to rotate  Figure 1 90 degrees.
Press Delete on the keyboard to rotate Figure 2 90 degrees.

8) Press PgUp/PgDn or CTRL+ Right or Left arrow keys to
   move figure on page in its current pose.
9) When you have posed the figure, once again save the frame
   by clicking Both Buttons.
10) Continue posing and saving until you are done then press
   Button 1 to exit the process.
11) Load the sequence into a window by clicking on the TEMPVEC.RUN
   Icon.
This is the only Icon that creates a RUN file in this program.
You can play the sequence any time by pressing R on the keyboard,
or by loading TEMPVEC.RUN. You can save the sequence under a
different name using the Save Button but the RUN extension must
be retained.
The delay between frames is set by the Clock Icon. Set the Size
Number to the desired delay, then click on the Clock Icon.

#V2 The Perspective Lines
    ~~~~~~~~~~~~~~~~~~~~~
If you have ever taken formal drawing instruction in school, you
may have learned about perspective in a drawing.

An example of one point perspective is a scene where the road
narrows as it approaches the horizon until it disappears at the
vanishing point. Telephone poles along the road get shorter and closer
together until they disappear at the vanishing point as well.

An example of Two Point Perspective is a drawing of a corner of
a building with the one side of the building getting shorter as
it approaches a vanishing point on the right at the horizon, and
the same being true on the left side with the left side of the
building getting smaller as it approaches another vanishing point
on the Left also on the horizon line.

An example of three point perspective is a partially opened book
on a table. The view is the same as two point perspective except for
the top book cover, which slopes and declines toward a third point
usually directly above one of the other two points. Another example
would be a sloped roof.

You can rearrange these guide lines by clicking Button 1 once
on the square, then move the mouse, then click button 1 again
on the new position.
You may draw lines as you would with the other vector tools
using the Curve, Grid lines or Dots etc. or simply draw free
hand. The perspective lines do not remain and are only there
as a movable guide.
An excersize would be to go to a window in your house and mark
the horizon line on the window with soap. Trace other lines
from builings etc and you will see how perspective works
on a 2 dimensional flat plane. (a flat piece of paper, computer
screen or window pane are examples of two demension planes,
width and height but depth is an illusion). Notice also that
colors on the horizon are mixed with grey, blue, and purple
by the atmosphere.

Both Buttons to exit the process.

#V3 Vector Frame It       greyscale optional
   ~~~~~~~~~~~~~~~~~~
If you enter a width of 50, a height of 50, and a depth of 500
it will look like a 3 dimensional room.

Click Button 2 on the page and it is written to POINTS.PNT
at the current zoom and position.
Remember POINTS.PNT can be edited in an active window.

#V4 Vector Curve
    ~~~~~~~~~~~~~
1) Set the Right (Draw) Color.
2) Set the Size number to the required number of editable points.
   (automatic minimum of 10 maximum of 25)
3) Button 2 to anchor line.
4) Button 2 again to anchor other end of line.
5) Button 2 on point, hold and move mouse to drag point.
6) Form the curve then click Both Buttons to write it to POINTS.PNT
7) Button 1 to exit the process.

#V5 Invisible Snap Grid
    ~~~~~~~~~~~~~~~~~~~
1) Set the Clip Count number (far left) to the vertical grid spacing.
2) Set the Size Number (far right) to the horizontal grid spacing.
 (automatic 10 minimum)
When you draw lines now by pressing Button 2, you will only be able
to place points on the grid intersections making it easier to
match up corners.
If you want to use a grid but also want to put points in between
the grid intersections, use the other grid tool. see #V7

Press E on the keyboard for an Ellipse at the cursor.
Press C for a curve after you have anchored the cursor.
Press G for the visible grid whith points that you can edit.
Press T for a straight or 90 degree magnetic line.
Press 1 to draw horizontal grid lines.
Press 2 to draw vertical grid lines.

#V6 The Free Hand Vector Draw Tool
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Draw color.
2) Set the Size Number. This is the horizontal grid divisor.
3) Set the Clip Count Number. This is the vertical grid divisor
4) Button 2 draws lines in the current draw color.
5) Button 1 to lift pen.
6) Both Buttons to exit process.

This Icon writes the lines to the file POINTS.PNT on D: if
D: is available, C: if not.
If it exists it is added to, if it does not yet exist it is
created.
In the rectangle cursor there are small marks that constitute a
grid. Unlike the other grid which divides the Window, this grid
divides the distance between points allowing for more flexibility.
To leave horizontal grid marks, press H, to leave Vertical grid
marks, press V. These marks are slightly offset.
To snap to one of these points, press the Space Bar.

The hypotenuse is used for special Magnetic Lines
To use the special Magnetic Lines see Vector Grid above. Magnetic
Lines work for both Icons.

You may also snap to any point in the current series of points in
the same way.
They snap to the actual point, not the offset.
You must be within 10 pixels of the point to snap to it.
This makes it easy to meet lines at corners.

Important! If you draw a line and want to lift the pen, you must
click Button 1 on the new point prior to clicking Button 2 to draw
the line, or you may have lines interconnecting the previous and
next lines.

To edit your new object, load it into a window with the POINTS.PNT
Icon, then use the Options in the window menu bar buttons.

Use this icon to trace clip art, create Objects, do freehand
architectural drawings, etc. See the next Icon.

Use the Save Button and choose vector PNT file, then name the
new file.
To start a new vector object, load POINTS.PNT with the next Icon,
then click on the upper right light button and choose Delete.
Now when you draw lines a new POINTS.PNT will be created.
see SCREENRM.DOC for more information.

To paste POINTS.PNT onto a page use ALT-P

#V7 Optional Snap-to Grid
    ~~~~~~~~~~~~~~~~~~~~~
Unlike other grids that are precicely x units by y units, with nothing
in between (the invisible snap grid), this grid is visible but only
snapped to by Button 1 (move pen) or Space Bar (end of line).
It also carries a variable grid on the anchor box cursor.
This tool has many complex features.

The only Vector point file you can add to or create with this Icon is
POINTS.PNT on D: if D: is available C: if not. If it exists it
is added to, if it does not it is created. To add lines to an
existing Object (PNT file):
1) Use the LOAD button
2) Select Picture
3) Select Vector
4) Enter the file name with extension PNT to work on.
(Objects directory has examples)
It will be copied onto POINTS.PNT replacing POINTS.PNT if it exists.
You may now add to or edit the object.
When you are finished, use the Save Button to save POINTS.PNT
under another name. This protects your work and provides better
program control.

To start a new Object or PNT file if POINTS.PNT already exists:
1) Load POINTS.PNT into a window with the POINTS.PNT Icon #34.
2) Select the right corner light button and choose Delete, OK
A new file will be created when you start to draw with this Icon
or the next one.

The idea is to draw lines that are recorded in a file that
you can load into a window, edit, or covert to a bitmap or
use in presentation etc.. The grid dots are not recorded in the
file.

Press 1 to paste the horizontal grid lines onto the page.
Press 2 to paste the vertical grid lines onto the page.
Press G to paste the entire grid and edit the intersecting
points.( Both Buttons at the same time to write the grid
to the file.)

To trace clip art or convert Bitmap graphics to a vector object
first load the clip or bitmap into a window, then select this
Icon or the next. The next Icon is a freehand vector tool without
grid.

To use this -snap to grid- vector tool:

You must be within 10 pixels of the point to snap to it.

1) Select a Draw (Right) color

2) Select a Size Number (extreme right).
 This determines the size of the horizontal grid spacing
 (minimum 10 automatic)
3) Select a Clip count Number. (extreme left)
 This determines the size of the vertical grid spacing
 (minimum 10 automatic)
The variable grid on the anchor box cursor is incremented by
the amount (start of line minus end of line divided by Size number)
both horizontally and vertically.
example:Clipcount (vertical grid spacing) is set to 20
        Size Number is set to 40 ( horizontal grid spacing)
        Therefore the horizontal variable grid dots will
        divide the distance between start of line to end of line
        by 40.


Leave dots all over the place, it does'nt matter, the only
time that lines are recorded using the vector tool is when
you press Button 2 to start or end a line.



The tool snaps to grid to the left, so place the cursor
arrow to the right of the intersecting grid lines and
press Button 1 (start of line) or Space Bar (end of line).

The drawing is completely editable in a window so don't worry
about a few unwanted lines or mistakes that you may make.

To draw lines and record them creating a vector object:

1)Click Button 2 or Space Bar to snap to a start point if you
 want. Even if you do not, your start point where the cursor
 arrow was when you pressed Button 2 is now registered
 and you may snap to it later, providing the grid spacing is
 far enough away from an intersecting point to allow it.
 Intersections and variable grid dots take precedence over
 line start points. That is why it is always best to snap to
 a start of line and end of line. So the corners will meet
 when you come back to complete the rectangle, triangle
 or whatever.
2)Continue moving to new locations and clicking Button 2
 to draw lines. To move the pen to a new location, Click
 Button 1. You may now move anywhere and start a new line.
 Remember if you are using the "snap to" functions and
 precision is important, snap to each point, start of
 line and end of line. (Button 1 and Space Bar) In high
 resolution this is more important because you can not
 see one dot or pixel clear enough to meet the corners by eye.

3)Both Buttons to exit the process.

4)Select another draw color and repeat steps 1 to 3

The old line start and end points are now gone.
You can not snap to the old points. You can
only snap to the new start and end of line points,
or grid line intersections.

This tool only addresses two dimensions on a flat plane.
If you wish to use perspective you may calculate it
yourself using the grid coordinates that are displayed
continuosly on the bottom scroll bar. Although the
coordinates are calculated to numerous decimal places,
they are rounded off to simplify matters. It is sufficient
for tracing and simple CAD applications. That is why the
coordinates are partially unstable, varying by one or
two pixels. The grid however does not vary
so trust the grid rather than the coordinate ruler.

Important! The grid uses a lot of conventional memory.
For compatibility reasons it will not extend beyond your
convention memory into EMS or XMS. It will only draw a grid
with as many points as it can. In high resolution, a grid
spacing of 10 will not fill the window. Use a higher grid
spacing to reduce the number of points and fill the entire
window. The grid does not extend to the edges of the window.
Lay out grid dots if you need to work close to the edge.

To recap the above:

New Object: Delete the old POINTS.PNT, new one is created.
Load Object: Use the Load Button.
Snap to corners: Space Bar or Buton 1 start of line,
                 Space Bar end of line.

Press 1 to paste the horizontal grid lines onto the page.
Press 2 to paste the vertical grid lines onto the page.
Press G to edit grid points.
----------------------------------------------------------------
Special Magnetic Lines
~~~~~~~~~~~~~~~~~~~~~~~
This tools has two special line options.

1) Magnetic Curve    C key
~~~~~~~~~~~~~~~~~
Press Button 2 on the start point for curve.
Move mouse cursor to end of curve and Press  C on the keyboard.
The hypotenuse line (angular bisection) becomes an editable curve
line. The higher the Size Number, the more points it will have.
Minimum of 10. Optimum 20.
You may now move the line points by pressing Button 2 within
Size number of pixels from the line points.
Click above a point, the cursor becomes magnetic and the line moves up.
Click below a point, the cursor becomes magnetic and the line moves down.
It takes a bit of practice but when you learn it's properties it
can be used to put a line, any shape, anywhere on the screen.

To record the line to the vector file: Move the cursor away from the
line out of magnetic range and Click both buttons.
Repeat moving and saving the line with Both Buttons if you want.

Click Both Buttons to write to POINTS.PNT file and Button 1 to exit
back to the vector grid draw. Any other key will exit back to the
vector draw without writing to file.

2) Ellipse               Press E on the keyboard
   ~~~~~~~~
Similar to a circle only the height and width may vary.
Press E on the keyboard and then Button 2 to drag the size
and shape of the ellipse. The centre is the cursor position when you
pressed E.

Both B to write the ellipse to POINTS.PNT.
Button 1 to exit the process.


3) Magnetic T Square Line          T key
~~~~~~~~~~~~~~~~~~~~~~~~~~
Press Button 2 on the start point for line1.
Move mouse cursor to approx end of line and Press  T on the
keyboard.
The hypotenuse line (angular bisection) becomes an editable line
The higher the Size Number, the more points it will have.
Minimum of 10. Optimum 20.
Make the hypotenuse horizontal, you get a horizontal line.
Make the hypotenuse vertical, you get a vertical line.
Make the hypotenuse angular, you get a multy step line
that seeks to 90 degree angles or to straigten itself out.

You may now move the line points by pressing Button 2 within
Size number of pixels from the line points.
Click above a point, the cursor becomes magnetic and the line moves up.
Click below a point, the cursor becomes magnetic and the line moves down.
Amazingly it always seeks to square itself. The ends shrink and grow
magnetically.
It takes a bit of practice but when you learn it's properties it
can be used to put a line or series of lines the same size in series.
The line appears to roll up and down seeking to follow the magnetic
cursor.

To record the line to the vector file: Move the cursor below and away,
or above and away from the line out of magnetic range and Click both
buttons.
Repeat moving and saving the line with Both Buttons if you want.

If you keep the cursor away from the ends of the line, it will
roll horizontaly or vertically true.( depending on if the line
is vertically or horizontally oriented at the time)
Click Button 1 to exit back to the vector grid draw without writing
to the file POINTS.PNT.

4) 3D Magnetic Grid            G key
~~~~~~~~~~~~~~~~~~~~
Set the Clip count number to the desired vertical grid spacing.
Set the Size number to the desired horizontal grid spacing.

Hold Button 2 and drag intersecting points.
Press Both Buttons and the grid is written to POINTS.PNT.

Create 3D spline drawings etc.
Fill each square with flood fill tool or bluescreen or zoom
in etc.
Paste onto page with ALT-P.

Click Button 1 to write to file and exit back to the vector grid draw.
Any key will exit back to the vector draw without writing to file.

----------------------------------------------------------------------

The location where you draw is recorded to POINTS.PNT and may be
edited by loading your drawing into a vector window. Icon #34
To paste POINTS.PNT onto a page use ALT-P
If the file size of POINTS.PNT is larger than 1 MEG you will be
told in order to avoid filling up your hard disk. Just delete
POINTS.PNT with the right corner button if you want. Save
with the Save Button first if you want.

#V8 Main Icons
    ~~~~~~~~~~~~
    Use this Icon to switch back to the normal Icon menu.

#V9 Load TEMPVEC.RUN into a window.

TEMPVEC.RUN is the file created by the Stick Figure Icon. It
is created on D:\ if D: is available C: if not.

When you select this Icon the sequence automatically starts playing.
Click Both Buttons to stop the sequence.
You can also play the sequence at any time without the window
by pressing R on the Keyboard while in the Paint Studio.
If it exists it will play.

You may save the sequence under a different name using the Save
Button or Load a previously saved RUN sequence using the Load
Button. When you load a RUN file it becomes TEMPVEC.RUN.
Once loaded you can add to it using the Stick Figure Icon.
To begin a new sequence from scratch first load TEMPVEC.RUN then
press the right top corner light button and choose delete.

#V10

#34 Load POINTS.PNT if it is Available
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have been tracing clips or making a vector object and want
to load the object into a window to edit it, then Click on this Icon.
POINTS.PNT will be loaded into a Vector Graphic Window.
POINTS.PNT is a temporary file that is written when you use
the Point Draw or Trace Icons #33 or #34.

To edit the object select the Image Button and select one of the
options there. Hide all 1 color, Unhide all, Step Edit Point and
Delete All 1 Color.

To remove lines permanently, use Delete All 1 Color or Step Edit.
For Step Edit use Button 2  for next line, Button 1 for Previous,
and Both Buttons to delete the line.
With a fast computer and small mouse set delays you will remove
many points per button press. Use arrows for a slower more careful
edit.
Up arrow, Down arrow, and Delete Key do the same.

Use Delete All 1 Color to delete a series of lines. Click Button 2
on the square that corresponds to the set of lines. A number appears
on some or all of the lines associated with the series. Try to Click
on the square, not the number as the choice is determined by the
color of the square. If you click on the white number nothing will
happen unless you have 256 series of lines in which case the line
series associated with the white squares would be deleted because the
color sampled when you clicked would be white as the text is white.

The deletions are permanent but not removed from the file until
it is saved with the save button.

see SCREENRM.DOC and two previous Icons for more information.

#35 The Camera
    ~~~~~~~~~~~
Click Button 2 to save the area inside the window as it appears
at the time. The file is named the next Clip Count Number.
eg: Clip count number is 6, file will be named D:\CLIPS\CLP7.VCX
if drive D: is available or else it will be named CLP7.VCX on the
C:\ANIPAINT\CLIPS directory. Use the Clip Board in the Cutting
Room instead, when you are there.

#36 The Load the Current File Again Window
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reactivates the current window. If you want to use the window
controls on the current file you can reactivate it with this
Window Icon.


#37 Paste Copy Options
    ~~~~~~~~~~~~~~~~~~
A menu appears with options to Flip, Rotate 45 degres,
mirror etc.
In a Window under Image, the picture can be rotated 90 degrees.
Here, a clip can be rotated 45 degrees.
Select an option and the current clip is made available for
pasting, if a clip corresponding to the Clip Count number
exists.

#38 Paste To Window
    ~~~~~~~~~~~~~~~~
The current Clip Board File is opened into it's own window. If
there is a Clip corresponding to the Clip Count Number available.

#39 Copy Rectangle Grow Box
    ~~~~~~~~~~~~~~~~~~~~~~
A rectangular area is Clipped to a Clip Board file corresponding
to the next Clip Count Number. The original is unchanged.
1) Button 2 to select first corner.
2) Both Buttons to copy area to file.
3) Button 1 when done to exit process.
If you press both buttons a second time, the last dimensions are
used.
Even if you abort the process, the Clip Count will be incremented
by one.

#40 Copy Poly
    ~~~~~~~~~~
Button 2 to mark the area.
Both Buttons to complete the polygon and capture the area
inside to a file.
The area is surrounded by a black background. Black is
ommitted when you paste it with Button 2 or choose the Paste
Options Icon.
Even if you abort the process, the Clip Count will be incremented
by one.

#41 Copy and Paste Rectangle
    ~~~~~~~~~~~~~~~~~~~~~~~~
1) Button 2 to anchor first corner.
2) Both Buttons to copy the area inside the rectangle.
3) Button 2 again to paste or paint with clip
or Button 1 to exit process.

Copies the area to the next Clip Board as determined by the Clip
Board Count + 1.

Important! :Only the area inside the dimensions of the primary
file is saved so if you paste outside of this area, it is not
saved between undo and redo. Capture window with Camera and Paste
to window with Icon #38 or choose New Pic or Resize Icon, and
resize the page, then paste the clip onto the new file.
Even if you abort the process, the Clip Count will be incremented
by one.
#42 Gradient Flood Fill Vertical   greyscale if R Color <> L Color
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Left Fill color.
2)If the Right Color is the same as the Left Color Gradient  is
  turned off. The single color is used.
3)Click Button 2 on the area to be filled.
  Move Mouse sideways to speed up fill
  Alternate with Space Bar to Stop Fill
4)Space Bar if filling, then Button 1 to exit process.

For patterns use the Poly Fill Icon or Flood Fill Icon or
Bluescreen a clipped pattern. (marble or brick etc..)

#43 Clip Art Libraries
    ~~~~~~~~~~~~~~~~~~~
Important! If you wish to paste 256 color Clip Art without the
background, set the left (fill) color to the background color.
Then when you paste the stamp with button 2 it will only paste
the image, not the background as well.

Toggle between 256 color or 2 color Clip Art with the 256 color
button. 256 color Clip Art may not look correct in 2 color mode.

1) For 2 color Clip Art, set the Left Color as the Background
color of the clip if you intend to paste the background as well
as the line drawing.
2) Set the Right Draw color to the desired line color.
3) Set the size number to the desired zoom factor. (5 is the
   Maximum, adjustable in the Clip Art controls)
4) Activate Clip Art Icon
5) Use Buttons on right hand side of Clip Art to change color,
   or change Libraries.
6) On the Left side of the Clip art window are scroll buttons.
7) Press Button 2 to scroll to the next row.
8) Press Button 1 on the Scroll Buttons to move up or down a bit
   if necessary.
9) Click Button 2 on the Clip Art Picture using the magnify glass
   as the cursor. A rectangle appears around the cursor location.
10) Button 2 pastes just the draw color on your picture.
   Both Buttons paste the draw color and the background.
   (If you have a black background and black draw color you will not
   be able to see the stamp if you press Button 2 only. Black on
   black)

Stamp the clip onto the window as many times as you want.

11) Click on the Done Button Top Right Corner to exit the current
process.
See Icon Stamp Draw Room and New Icon Stamp Icon #67 for information
on creating your own Clip Art Libraries.

You should become familiar with all aspects of the program before
you attempt to make your own Clip Art Library because it is a
rather complicated task. You need to create a blank then paste onto
it. Then save it as C:\ANIPAINT\STAMPS\STAMP#.VCX where # is the next
available library number. Then increase the max stamps number in
the Options Menu of CONFIGIT.

To paint with a stamp:   ( patterns, tiles, bricks, backgrounds etc)
1) Stamp onto page.
2) Capture stamp with Copy Rectangle Icon.
3) Choose Bluescreen Icon

#44 Sherlock the File Finder
    ~~~~~~~~~~~~~~~~~~~~~~~~
1) Select Icon with Button 2.
2) Enter a Search Pathmask. (eg: *.PCX)

Searchmode is activated and the hard disk is searched for all
File Names matching the pathmask.

#45   Scenery For Act1 Animation      See ANIMATE.DOC for more info.
      ~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Click Button 2 on the Icon.
2) Move the rectangular area cursor over the area of the
picture that you want to use as the first backdrop, then
click Both Buttons to blow up area into the Cutting Room.
You Are transported there as well now under it's control.

For on the spot animation, use this Icon then after you have
created an ACT1 animation, use the Presentation Icon to
paste the animation back onto the scenery. See Presentation
in SCREENRM.DOC or the last Icon in this file.

Also see below.

#46  The Cutting Room           see CUTTNGRM.DOC for information
     ~~~~~~~~~~~~~~~~~~
Act1 Animation is created in this room. It has it's own icons as
well as the other Upper Icons that appear in the Icon Bar.
Only the file ACT1.ANI can be created or added to but you
may reload and edit any ACT1 animation file.

The Screen is NOT CLEARED moving between the Cutting Room
and the normal Paint Studio Controls.It is a little messier this
way but it also allows you to move freely back and
forth without changing your on-screen work.
Get help on individual Icons in the Cutting Room by clicking
Button 2 on the Help Button in the cutting room bottom
left hand corner. Read about ACT1 animation in ANIMATE.DOC
There are many ways to create effects once you know how.
Help is available in the cutting room.

#47 New Pic Icon
   ~~~~~~~~~~~~~
By default the page is black. To get a white page see below.
Start a New VCX Picture.
If you press Button 1 you will accept the default shown.
If you press Button 2 you will have to enter new sizes.
If you press enter you will use the previous size.
Example 1: The previous size was 200x128.
           It asks, Enter a Width <640>: You press enter alone.
           The new size is 200x128.
Example 2: The previous size was 200x128.
           It asks, Enter a Width <640>: You press Button 1.
           It asks, Enter a Height<400>: You press Button 1.
           The new size is 640x400.
Otherwise:
1) Enter a Width, 4000 maximum.
2) Enter a Height.
3) VCXTEMP.VCX and VCXTEMP2.VCX are created on D:
  if available C: if not.
Draw, Paste etc.. onto the new file. Then choose SAVE to rename
the file. Undo and Redo use these two files. Autosave alternates
between the two.
If you have a slow computer or are creating ACT2 animation you
may want a size of 320x200. It is not mandatory to use a picture
size of 320x200 when creating ACT2 animation. No matter what size
of page you are using, it saves 320x200 in the top left corner
(for FAST320x200VCX) or 320x200 or 200x320 anywhere (ACT2NAME)
when you save an ACT2 frame.

Important! Undo and Redo only save what is inside of the page
dimensions.

For a page color other than black:
After creating a new pic,
1) Set the Right (draw) color to the desired page color.
2) Select the Swap Color Icon #9.
3) Click Button 2 on page.
Color black is replaced by the Right (draw) Color.
Now Click Button 2 on the Bottom Scroll Bar to load the
secondary file.
Repeat steps 1 to 3. Both Primary and Secondary are now the
desired color.
Caution: Do not be too hasty to change the picture from the
default Black. If you make the page all white it is harder on
the eyes and many processes can exclude Black #0. You are
denying yourself those options when you change the picture color
and it slows the performance of the program slightly. However,
if you find that you are continuously losing part of your
picture because you can not tell the edge of the current page,
you may want to use this option. The Clear Icon only alters the
current window, the Swap Icon changes the entire file.


#48  Show the Previous Clip
     ~~~~~~~~~~~~~~~~~~~~~~~
The previous clip appears in the top left window corner.
Use this to screen ACT2 Animation sequences that are 320x200 or
to review any clips that you have made.

#49 The Action Icon             See ANIMATE.DOC for more info
~~~~~~~~~~~~~~~~
Use the Action Board to Copy the Area Top Left window corner to
320 dots to the right and 200 dots down. ( 320x200)

It Captures ACT2 animation Frames.
Incrementing the clip count by twenty if the clip count is
less than twenty to separate Clip Board Files for scratch work.
It keeps track as well of the last frame number.

#50 Show The Next Clip
    ~~~~~~~~~~~~~~~~~~
For screening the next frame in the sequence, or any Clip Board
file, as determined by the Clip Count Number.

#51 Show ACT2 Fast Full Screen Animation
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you weren't in 320 x 200 mode you will be. Watching whatever
clip is in line from the LEFT Clip Count Number to the Right Size
Number. Once the clip count reaches the Size Number in the
animation sequence, the count starts over again at the clip count
number. If you have disabled mode switching in CONFIGIT you must
be in 320x200 mode to use this Icon.
1)Button 1 to slow down.
2)Button 2 to speed up.
3)Both Buttons to exit process and return to normal mode.

Remember!: Set the Right Size Number to the Last Frame and the
Clip Count Number to the FIRST FRAME. Both Buttons when Done. If
not, you will hear a series clicks to notify you that
it cannot find a file. Turn Sound Off if it annoys you
using the Mouse Set Icon. Sound is important because it
gives you more awareness of the program operations. See Mouse Set
Icon for info on sound.

#52  ACT2 Delay Clock
     ~~~~~~~~~~~~~~~~~
1) Set the Right Size Number
2) Click Button 2 on clock and delay is set to the amount of
milliseconds shown on clock.


#53 Combine Files
    ~~~~~~~~~~~~~~~
1) Import a list as an ASCII file or use the File List Icon to
   create one.
2) Follow ongoing instructions to combine files such as to create
   a New Knowledge Base.  Essentially the same as Copy *.*
   filename.ext /b
   First it copies the files on the list onto a temporary directory,
   then copies all the files in that directory  onto one file.
Act1 animation cannot be made this way as other information is
stored in the file between frames.
The original files in their original directories are unchanged,
only copies are made, combined, then the copies deleted leaving
one large file.

#54 File List Icon
    ~~~~~~~~~~~~~~
1) Click on File List.
2) Previous list if it exists is erased and initialized.
3) You are transported to the File Screening Room.
4) Mark files and click on the Line Height Scale Button on the
   right side to append the names to SCRIPT.TXT.
5) When the list is complete, return to the Paint Studio and
   Press File List again to turn it off.
6) Combine all files on list into one file with previous Icon.
   May be used to create a new Knowledge Base etc.
   A list of file pathnames has many uses for someone who is
   an experienced computer user. Batch files etc.

#55 Blue Screen
    ~~~~~~~~~~~~
1) Click Button 2 on the left top corner of your preferred
location to begin replacing a color with the clip.
Replace the color under the mouse cursor with the current clip
board file beginning with the mouse location and repeating the
image until it reaches the Right Window Edge, then it will
start a new row.
If the current clip is an image larger than the window, it will
completely replace one color, effectively pasting a background
around an image by replacing the one color background color with
the clip. (Just like on T.V. the Six O'clock News');

If you need to, put a dab of the replace color in the top left
corner of the window. Then click on that spot to get the bluescreen
effect to begin closer to the left edge.
Use this icon to Tile a page, or replace a color with marble or
brick, or any pattern you can sample with any AniPaint capture
tool. Try different effects like rotating the clip and capturing
it rotated, then bluescreen it that way. Or bluescreen over
bluescreen etc..

#56 Paste Together a New Clip Art Library
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The width is preset but the length can vary depending on the
number you enter when prompted. If you are using 320x200 mode
you may want to create your own width with the New Pic Icon.
Any VCX can be a Stamp Library.

Once the new blank is constructed you may paste clips onto the
file and save the file with ALT-S. This will update the new file.
Then use the SAVE button to rename the file.
(Save VCX) Save as C:\ANIPAINT\STAMPS\STAMP#.VCX where # is the
next available #.
Stamps are kept in the STAMPS subdirectory. If you do not put them
there they will not be loaded by the Clip Art Icon.

Run CONFIGIT.EXE to add 1 to the stamp number in Options.
As long as it is saved you can reopen it and add to it until the
blank is full. Just load the STAMP#.VCX name of the file from disk.
If your clip art is larger than the Clip Art Icon Window then do not
add them to the library. Instead load them from disk as needed in
the File Screening Room. Just load the Clip art file and Capture as
many images as you want to make into current Clip Board Files.
The Clip Count Number is automatically incremented each time.
Then adjust the clip count number and paste your clips.

Make stamps for the your library with the Icon Draw Room Icon #66.
See New Icon Draw Room #66, New Icon Stamp Icon #67 and
also see the Clip Art Icon #43  for more information.

You should become familiar with all aspects of the program before
you attempt to make your own Clip Art Library because it is a
rather complicated task.

#57 Flood Fill
    ~~~~~~~~~~~~
This is a normal flood fill tool with the exception that the
fill is only bound by one color. That color must be the right
draw color.
The Left Color is used for the fill.
The Right Color is the outline or draw color.
Set the pattern prior with the Pattern Icon if you wish.
Be sure you press ALT-S prior to using this tool if autosave
is disabled. If you select the wrong color as the outline
or boundary color, it will paint over everything.


#58  Gradient Shield      scaled palette recommended.
    ~~~~~~~~~~~~~~~~~
1) Set the Size Number
2) Create a Size Number sided filled gradient shield when you
press Button 2
3) Press Button 1 to move pen.
4) Both Buttons exit process.


#59 Normal Circle Draw
    ~~~~~~~~~~~~~~~~~~~~~
1) Select the Right Draw Color
2) Select the Size number.
3) Click Button 2 to draw circle size number wide.
4) Press Button 1 to move pen.
5) Both Buttons exit process.

#60 Gradient Globe Circle    Scaled palette recommended.
    ~~~~~~~~~~~~~~~~~~~~~~
1) Left (Fill) color darkest shade of globe.
2) Button 2 to anchor point, then move mouse
3) Button 2 to draw globe

If L color # is higher than R color # then outside color
Inside gets brighter with a scaled palette.

If R color # is higher than L color # then outside color
Inside gets darker with a scaled palette.

   Space bar to paste geodesic design.
4) Press Button 1 to move pen.
5) Both Buttons exit process.




#61 Filled Circle or Polygon
    ~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Right Draw Outline Color
2) Set the Left Fill Color and the Pattern Icon if desired.
3) Button 2 to anchor circle
4) Move mouse to position and size Circle
5) Button 2 to Draw and Fill Circle
6) Press Button 1 to move pen.
7) Both Buttons exit process.
Size number determines how many sides. Maximun 45.
eg:Size number 8, draws octagon. Size number 30 and up draws circle.

#62 Draw an Arc or half circle
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
 The size number is 8 you get half an octagon. At size number 30 the
 polygon becomes an arc.

1) Set the Right Draw Color
2) Button 2 to anchor the arc.
3) Both buttons to draw the arc.
4) Press Button 1 to move pen.
5) Both Buttons exit process.


#63 Draw and Fill an Arc
    ~~~~~~~~~~~~~~~~~~~~
The size number is 8 you get half an octagon. At size number 30 the
 polygon becomes an arc.
1) Set the Right Draw Color
2) Set the Left Fill Color
3) Button 2 to anchor the arc.
4) Press Button 1 to move pen.
5) Both Buttons exit process.

#64 Gradient Torus  scaled palette recommended
    ~~~~~~~~~~~~~~
1) Set the Right (Draw) color to darkest shade of torus.
2) Button 2 to anchor point, then move mouse
3) Button 2 to draw torus
4) Button 1 move pen
5) Both Buttons to exit the process;


#65 Gradient Fill Area Horizontal      greyscale if R Color <> L Color
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Set the Left Color
2) If the Right Color is the same as the Left Color Gradient
   is turned off. The single color is used.
3) Select the Icon
4) Fill with horizontal gradient colors
5) Move the mouse sideways to speed up the fill
6) Space bar to stop the fill.
7) Button 1 to exit process.
When you are using it as a gradient fill and it does not fill the
entire area, you have to resample the color in order to preserve
the continuity of the gradient effect. (dark areas don't match
with light areas) Exit the process and resample the color
on the same level of gradient as that which will be the start
of the next gradient fill.

#66 Icon Stamp Draw Room
   ~~~~~~~~~~~~~~~~~~~~~
The current screen is not cleared to allow you to paste an Icon
into the small icon window or Picture into the Large draw area.
If it is too messy and you can not clearly see the Icons
( eg: moving from The Cutting Room to New Button)
then Press the Clear Screen Icon first or F3.

In the Icon Draw Room, You draw with square blocks the
size determined by the current setting under the Paint
Brushes Icon. You may shrink and copy to the Icon window
with the Arrows Toward I Icon. The Single Paint Brush Icon
replaces the color that is under the mouse cursor when Button 2
is pressed. The Left Color is replace by the Right Color

Both Buttons or Button 2 on DONE to exit process.
Save to a file with the next Icon.
These Icons can be used to paste into a CLIP ART Library.
Make a bunch of them, then, in the Screening room enter
the path *.ICO. Then load the icon and use capture to make
clips of them. Then press Button 1 on the name of the clip
one after another as they appear on the dormant file list.
(below the directory area). This will allow you to paste the
clip. You will see a rectangle with an X in it instead of the
clip. Paste a bunch of them into a block on the right side
of the screen beside the directory area. The standard in this
program is 12 rows of 5, but if you are confined to 320x200
resolution make 12 rows of 2 or 3. (an area approx 80x50 each)
Then use the capture button again to capture the block of stamps.
Then go to the Paint Studio and create a blank Clip Art file
using the New Clip Art Icon #56. Once you have a blank you can
paste the block of icons onto the blank clip art using the
Edit Button on the Window Menu. Then exit the window and choose
the Autosave Icon #89. The name STAMP#.VCX should appear in the
vertical scroll bar after it saves.

You should become familiar with all aspects of the program before
you attempt to make your own Clip Art Library because it is a
rather complicated task.

    Important! ANIPAINT.ICO, and ANICFGIT.ICO
    are Microsoft Windows Icons and are not AnIPaint compatible.
    They are for Windows Users to load the program.

#67 New Icon Stamp Icon
    ~~~~~~~~~~~~~~~~~~~~~

Set the Size number. The Icon is saved as ICO#.ICO
Where the name is determined by the Size number.
While you have not pressed Button 1, Each time you click
Button 2 the area inside the rectangle cursor is saved to
a file. The Size number is then incremented by one.
When you are done press Button 1 to exit the process.
They are used to make stamps to include in your Clip Art Libraries.

If you had a whole page of Icons in a PCX, you could make a
clip art library from them by converting it to VCX and naming the
file C:\ANIPAINT\STAMPS\STAMP#.VCX where # is the next available
stamp number. If you have not made any new Stamp libraries
yet you would name the file C:\ANIPAINT\STAMPS\STAMP4.VCX
Run CONFIGIT to increase the stamps number.

Once this is done the clip art can be loaded using the Clip Art Icon
and selecting Library when it is loaded.

These Icon Stamps can be created using the Icon Stamp Draw Room #66
above, or captured from any area of the screen.

Although they are small in 1200x1024 mode they seem large in
320x200 mode. They are not compatible with Microsoft Windows or
any other program that I am aware of.

Important! You can not alter the Program Icons they are loaded from a
program library file and must remain intact.
See Clip Art Icon #43 and Icon Stamp Draw Room #66 for addition
information.
You should become familiar with all aspects of the program before
you attempt to make your own Clip Art Library because it is a
rather complicated task.

#68 The Fill Patterns
    ~~~~~~~~~~~~~~~~~~
1) Select the Icon.
2) Button 2 to select a fill pattern.
3) Any other button to exit.
Solid Fill is the default.

#69 The Tape Measure
    ~~~~~~~~~~~~~~~~
If you are doing any work that requires precision, then
you may want to use this for measuring coordinates.
Width, Height and the Hypotenuse are used to measure
the difference between any two points.

#70 The Magnifying Glass
    ~~~~~~~~~~~~~~~~~~~~
This Icon turns on the magnify cursor until you click
Button 1

#71 Scatter The Color       greyscale first for best results
~~~~~~~~~~~~~~~~~
Use this Icon to mix color up in an area the size determined by
the Size Number.

1)Set the Size Number
2)Select the Scatter Icon
3)Position rectangular box over area
4)Button 2 to scatter colors in the area
5)Button 1 to exit process
All rectangle box cursors that do not anchor and
grow, shrink and grow by bouncing off the window edges.

#72 The Blender         greyscale first for best results
    ~~~~~~~~~~~
Use this Icon to Blend the Color in an area the size determined
by the Size Number.

1)Set the Size Number
2)Select the Blender Icon
3)Position rectangular box over area
4)Button 2 to Blend Colors in the area
5)Button 1 to exit process
All rectangle box cursors that do not anchor and
grow, shrink and grow by bouncing off the window edges.


#73 Light and Dark       greyscale first for best results
   ~~~~~~~~~~~~~~~~~
Use this Icon to Lighten or Shade color in an area the size
determined by the Size Number.

1)Set the Size Number
2)Select the Light Dark Icon
3)Position rectangular box over area
4)Press Button 2 to initialize
5)Button 2 to Lighten colors in the area
6)Button 1 to Darken colors

Both Buttons to exit process

All rectangle box cursors that do not anchor and
grow, shrink and grow by bouncing off the window edges.

#74 Magic Wand
    ~~~~~~~~~~~
Use this spray tool to spray edit photographic pictures. The color
is automatically sampled.
1)Set the Size Number
2)Select the Icon
3)Button 2 to initialize
4)Move and spray the area in the direction of the arrow.
  Takes practice but works great.
5)Click Button 2 again to cycle through 4 different directions

Both Buttons to exit process

#75 The Clip Finder Board
    ~~~~~~~~~~~~~~~~~~~~~
Use this Icon to temporarily travel back to the File Screening
Room and retrieve a Clip from file. D: is searched if D: is
available or else C: is searched.  All clips are named CLP#.VCX
and usually kept in the CLIPS directory.

note:If D: becomes full automatic use of D: is disabled until
you reload the program. So, if you have made a series of clips
prior it will search C: instead of D:. Your clips on D: will
not be found by this process. You will then have to manually
switch drives by entering D: on the pathline area above
FILES/DIRECTORY. Your clips will be in a subdirectory called
D:\CLIPS.

#76 3D Bar       Gradient Option
    ~~~~~~
1)Set the Left Fill Color and Pattern Icon if you want.
2)Set the Right Outline Color. This color is the first
when you select gradient. The gradient option requires
a scaled or partially scaled palette.
3) If you want a gradient filled 3D block set the Size
Number to determine how many colors to skip as the
gradient fill progresses.
You will be prompted for:
Width: the frontal width of the block.
Height: The frontal height of the block.
Depth: The number of lines or pixels deep.
Gradient: The color gets brighter as it moves forward.
With gradient, be sure to select the Right Draw color as the
darkest of the shades you wish the block to use.
example: You choose the first of 8 shades of green as your
draw color. You select a Size Number of 1.
Enter a depth of 8 when asked. The color will increment
getting brighter as the block is drawn, giving the illusion
of depth. If the Size number is 2, then it will stop at
16 colors from the Chosen Right Draw Color. Each shade will be
2 colors brighter than the previous one. If the Size number
is 4 then every shade will be 4 colors brighter etc..

Use this Icon for dazzling 3D Bar Graphs. Use a graph similar
to the 3DGRAPH.PNT vector object example included with this
release. Just load 3DGRAPH.PNT into a window, and add the
3D bars.

Perspective
~~~~~~~~~~~
If you choose perspective the front will be larger than the
back.
If the block is not gradient, you may rotate the block by
bouncing the cursor off the walls of the window.
The top and bottom edges of the window rotate the block vertically
on a horizontal axis.
The Left and Right window edges rotate the blockk horizontaly on a
vertical axis.
If gradient is on, the cursor will move but that it will have no
effect on the block it will draw.

#77 Shrink 10 % Icon
    ~~~~~~~~~~~~~~~~
1)Set the cursor box size with the Size Number
2)Click Button 2 to shrink the area inside the box.
All cursor boxes that don't anchor and grow, shrink and
grow in contact with the window edges.

#78 Rounded corners Rectangle Draw
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Select the Draw Color
2)Select the Size numer for Width of box
3)Select the Clip Count Number for Height of box
4) Button 2 to draw a rounded rectangle.
5)Button 1 to exit process
Shrinks and grows in contact with window edges.
Occaisionally one of the lines may not be completely
horizontal due to the ratios between width and height.
To correct this move the cursor either to the right or
left window edge. When the size changes the lines will
be corrected.

#79 Rounded corners Filled Rectangle Draw
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Select the Draw Color
2)Select the fill color and patttern if you wish.
3)Select the Size numer for Width of box
4)Select the Clip Count Number for Height of box
5) Button 2 to draw and fill a rounded rectangle.
6)Button 1 to exit process
Occaisionally one of the lines may not be completely
horizontal due to the ratios between width and height.
To correct this move the cursor either to the right or
left window edge. When the size changes the lines will
be corrected.

#80 Frame It
    ~~~~~~~~~
1)Set the Right Draw color to the first gradient shade.
2)Set the Size number to the number of color shades to
  skip each time.
3)Enter a Width
4)Enter a Height
5)Enter a frame depth.
6)Button 2 to draw frame.
The size number determines the design on the frame.
Experiment with differrent size numbers to see the effect.

~~~~~~~~~~~~~~~~ Important Icon! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#81  Lighten and Darken Polygon        scaled palette recommended
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Set the Left Color to the desired brightness to add
 The first time you press lighten it will increment the color
 contained inside the polygon by this many colors.
2)Button 2 to Mark the area
3)Both Buttons to complete the polygon
Important! It must first be initialized.
3)Button 2 to initialize
4)Button 2 again to lighten the area
5)Button 1 to darken the area
6)Both Buttons to exit the process
Works well with practice.

#82  Copy Grow 10% and Paste  Polygon
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Button 2 to Mark the area
2)Both Buttons to complete the polygon
3)Button 2 to Paste
4)Button 1 to exit process

Picture is pasted 10% larger

#83 Enlarge Page
    ~~~~~~~~~~~~
1)Enter the Width and Height
Picture on screen, in window, is captured and pasted on the new
background.
To Alter the Pictures Proportions, use a graphic window's
zoom button, then copy an area. Paste the clip onto a background
created with the New Pic Icon.
To enlarge a picture's proportions zoom it out, then capture
screen and then paste on new larger background. There is no
option to save a Zoomed out picture as a new file, because a
picture zoomed out at the power of 10 and saved in this way could
hypothetically fill your hard disk. Anipaint has a maximum
picture width of 4000 pixels and an undetermined maximum length.

#84 Change Text Color
    ~~~~~~~~~~~~~~~~~
1)Set the Size number to approximate height of text
2)Select the Right Color to the amount to brighten the
color.
3)Button 2 to increment the color inside the Rectangular area by
one.
4)Button 1 to decrement the color inside the Rectangular area by
one.
5) Both Buttons to exit the process.
Size the cursor area by bouncing the cursor box off the window
walls.
White and Black are not affected.

#85 Create a Font
    ~~~~~~~~~~~~~
1)Select the Icon
2)Select Font
3)Select Size
4)Select Shading if desired or Stretch
5)Toggle between front character and back character
  in the centre of the scroll buttons, if stretch is on.
6) Stretch and Shadow may be turned off and On by
   clicking Button 2 on the word Off or On in the boxes beside
   shadow and stretch.
7)When satisfied then choose OK
8)Name Font if you want to save it  eg: NAME.FNT
9)The font becomes the current font either way.
Choose Cancel to abort the process

The color of the text is determined by the Right and
Left colors when you type it. see next Icon below.
Remember the color of the Font and shadow are relative
to the current palette.

The included  Fonts are kept in the Fonts Subdirectory.
When you name your Font, if you use the full path,
C:\ANIPAINT\FONTS\fontname.FNT then the font will
be put in the FONTS subdirectory. If you omit the
full path and just enter the name fontname.FNT then
your Font will be put in the ANIPAINT directory.
(fontname is any valid name according to naming convention)

Choose the next Icon to Write Text.
Justify is unused and included only for future compatibility. The
Font creator requires a screen resolution size of 640x480 to
work.


#86 Write Text Copy and Paste
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
1)Select the Left and Right Colors
2)Select the Icon
3)Button 2 to anchor cursor and Write Text
4)Button 1 anywhere below window top to move to new location
5)Press enter for next line
6)Move mouse towards window top and it becomes an arrow.
7)Use the arrow to cut out the Text
8)Button 2 to Paste the Text
9)Button 1 to exit process
In 320x200 mode you have not got enough pixels to use large
fonts.

#87 Retrieve a Font File
    ~~~~~~~~~~~~~~~~~~~~
You are transported temporarily to the File Screening Room
to Retrieve a Font File.
1) For the Included fonts, Click Button 2 on the Fonts
subdirectory, Then click on the word "Directory" in the
FILES/DIRECTORY area to get the files. Load the Font like any
other file with    Button 1 .
You will see the message "Font Loaded" if it is a valid AniPaint
font file. Only AniPaint fonts are compatible with AniPaint.
If you use Button 2 the file filename is marked but not loaded.
Don't confuse Button 1 and Button 2.

You may now choose Write Text to write to the screen with the
chosen Font. When you save a font it is saved to the Anipaint
directory unless you specify otherwise. If you want to retrieve
one of these, omit switching to the Fonts subdirectory.
If the Screening Room will not allow switching directories
then press Cancel first.

#88 Make Full Screen the Default      (also ALT+F on the keyboard)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are drawing in 320x200 mode this will give you a larger
work area.
Toggle between On and Off.
Status report is on Icon.
Window controls are still available just outside the screen.
It is a matter of practice and familiarity with the window controls
to move the mouse just outside the screen to scroll and  use the window
Menu Buttons, zoom etc..
Click past their normal width and the window closes.
Use the Cursor Keys and PGUP and PGDN to scroll if you find it easier.
See the beginning of this file for more information on Keyboard Control.

#89 Turn Auto Save On
    ~~~~~~~~~~~~~~~~~~
By default Auto Save is On unless disabled in the Options
Menu of CONFIGIT.
Some tools such as the Cutting Room turn autosave off.
So once you are finished, if you want undo and redo again,
you must use this Icon to reactivate it.
If Autosave is disabled you may override the disabillity for
one save by pressing this Icon. It will be only temporarily
turned On.

If You Override this with one of the next two Icons you may have
to press this button to reactivate Undo and Redo
The File is saved between processes to VCXTEMP.VCX (or
Another VCX name if you loaded one from disk) and
VCXTEMP2.VCX.
The file name appears in the Scroll Bar when it saves.

D: is used if it is available.
If you don't want to use Autosave then activate one of
the next two Icons or disable it entirely in the CONFIGIT.EXE
utility. If your computer is slow, autosave is a very slow
process. If you have a 486 then it is a very useful option. The
Left Vertical Scroll bar Loads the Primary file and the bottom
horizontal scroll bar controls the secondary file.
When Autosave is on the program alternates between the two.
Undo - Load the one saved last.
Redo - Load the other.
This is an option that you should take advantage of.
There are also keyboard controls for this. See the beginning of
this document.

#90 Save the Primary VCX
    ~~~~~~~~~~~~~~~~~~~~
The Primary file if it is a VCX will be
saved in it's current state.
The file name appears in the Scroll Bar when it saves.

#91 Save the Secondary VCX
    ~~~~~~~~~~~~~~~~~~~~~~
The Secondary file if it is a VCX will be
saved in it's current state.
The file name appears in the Scroll Bar when it saves.

#92 Turn Autosave OFF
    ~~~~~~~~~~~~~~~~~~~~~~
Autosave will be turned Off.
You may disable Autosave in Configit but some processes require it
be activated and may activate it prior to their process. If they
do you may want to shut it off manually.
Same as F4.



#93 Mouse Setup, Program Delays and Sound On/Off
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Each time this button is pressed the Mouse Buttons Trade
names and operation is reversed. Button 1 becomes Button 2
and vice versa.
Next you may set the delays
Press Enter for the Default Settings shown in brackets <default>
If the program is skipping right by a process then you may
need to increase the delay.
With a very fast computer, a 0 process delay could hypothetically
disable the program.
If this happens reset the delay with the Mouse Set Icon. If this
cannot be done, then delete C:\ANIPAINT\FILECFG.KEY and it will
be replaced. Then set the delay using CONFIGIT. The Mouse Set Icon
writes to FILECFG.KEY and takes precedence over CONFIGIT.

If the sounds are too long and noisy then it is a sign that you
need to reduce the delays. The sounds should be low and quiet if
configured properly.
If the sounds are annoying then turn the sound off by answering
yes.
When something is wrong there are not always visual clues but
there are always auditory clues. Even when something is wrong it
is usually not serious because of the way errors are handled by
the program. It has a built in recovery system. However if a file
cannot be found the operation cannot be performed whatever that
operation might be. You will hear a beep if sounds are on. Nothing
may happen at all if sounds are disabled.

#94 Cruise Disk
    ~~~~~~~~~~~
Choose a Drive and Path. eg D:\*.* or C:\ANIPAINT\*.*
The directory is piped into a file and displayed in a
window.

#95 Picture Color
    ~~~~~~~~~~~~~
Change the picture's palette colors to the current palette
colors. If the palette is the same no change will occur.
Answer yes and it is done.

#96 Gradient Curves
    ~~~~~~~~~~~~~~~
There are 6 gradient curves. All of them toggle on
and off using the numbers on the keyboard.

1)Set the Left Color Number as the first shade of the
  gradient effect.
2)Set the Size number
  A size of 10 produces a solid one color thin curve
  A size greater than 10 begins the gradient effect.
  A Size of 40 makes a nice gradient curve.
3)Hold Button 2 while drawing roughly the intended curve
4)Click Button 2 to release the line.
5)Move the mouse down and out to reorient the curve.
6)Click button 2 to draw the curve.
or
7)Click Button 1 to track the curve.
or
Press a number from 1 to 6 on the keyboard to toggle the
various curves off and on. They may be used together
but some combinations will not be desireable.

When you begin curve number 5 is on. It's opposite is
curve number 4. Toggle 5 off and 4 on and then press
Button 1. When the curve releases from the page it will
orient itself opposite and upside down in relation to
the previous curve.

Some of these curves are self tracking, which means if you
do not move the mouse but just alternate Button 1 and
Button 2 the curve will be drawn then reoriented on
the same directional plane along an imaginary line. When you
select it's opposite as in the (5 and 4 example) it will
go back the other way matching up with the previous curve
giving you an S curve.

The best way to use these curves are to experiment with
them to see how they work. There are many effects that
can be created with these curves.

#97 Text Color
    ~~~~~~~~~~~
Use this Icon to change the default Text Color

You have to go to the File Screening Room and load a Text
Window before it will take effect.
The change is temporary. The default colors must remain dominant
due to the problems associated with different palettes.
See understanding color.
You can however alter the default palette by replacing MENU1.PAL
or 16MENU1.PAL with your own creation. Be sure you know what you
are doing first. If you ever really mess things up you can
reinitialize the program with CONFIGIT.EXE

#98 Convert VCX to Black and White 2 Color

1) Set the Size Number to the dividing Point.
2) Answer Y and it is done.
First it is normalized if zoomed out, then greyscaled, then
reduced to 2 colors.
If you zoom in first you can create some effects.

Color 128 is the middle. Every color higher than the Size Number
will become White. Every color less than the Size Number will
become Black. Experiment for best conversion.

Click on the horizontal or vertical scroll bar to undo.


#99 Reverse Color #0 with Color #255
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
By default, color #0 is black, but you may want to reverse
the colors for some reason. Invert 2 color images, for instance.
The change is temporary, so save the palette if you want a
permanent change.

#100 Run DO1.BAT if it is Aavailable
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have not yet created DO1.BAT then you will see the
error message BAD COMMAND or FILENAME. No Problem.

Use this Icon to run a batch file that you have created and
named DO1.BAT.
Important ! You will probably not have enough memory to
do more than run simple utilities, such as a compression
utility.
If you do not have enough free conventional memory you
will get an error message eg: Cannot Execute
Optimize your system for maximum available conventional
memory.

A batch file is a file that can be used to run utilities,
or do DOS commands etc.
It is created with a text editor such as DOS EDIT.

eg: MD C:\MYSHOW
    COPY ACT2.PAL C:\MYSHOW
    COPY D:\CLIPS\*.VCX C:\MYSHOW
    COPY PLAYACT1.EXE C:\MYSHOW

save the file as DO1.BAT and when you use this Icon it
will execute the commands contained in DO1.BAT

Another example would be to use DO1.BAT to run a compression
utility. Compress with DO1.BAT, Decompress with DO2.BAT
(see below).

See your DOS Manual on Batch Files.

#101 Run DO2.BAT if it is Available
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have not yet created DO2.BAT then you will see the
error message BAD COMMAND or FILENAME. No Problem.

Use this Icon to run a batch file that you have created and
named DO2.BAT.
Important! You will probably not have enough memory to
do more than run simple utilities, such as a compression
utility.
If you do not have enough free conventional memory you
will get an error message eg: Cannot Execute
Optimize your system for maximum available conventional
memory.

A batch file is a file that can be used to run programs,
or do DOS commands etc.
It is created with a text editor such as DOS EDIT.

eg: MD C:\MYSHOW
    COPY ACT2.PAL C:\MYSHOW
    COPY C:\ANIPAINT\CLIPS\*.VCX C:\MYSHOW
    COPY C:\ANIPAINT\PLAYACT1.EXE C:\MYSHOW

save the file as DO2.BAT and when you use this Icon it
will execute the commands contained in DO2.BAT

See your DOS Manual on Batch Files.

#102 ACT2 Room Icon
     ~~~~~~~~~~~~~~~
Use this Icon to work with your ACT2 Clips. Create SHOWIT.ACT
an ACT script. ACT scripts are also created with the last
Icon and the Presentation Button in the Screening Room.

When you select this Icon, three clips are loaded into
windows. The current Clip (as set by the Clip Count Number),
the clip before the current one and the clip after.
The current clip is loaded into the large window.
Button 2 inside the ACT2 Room is the action button.
Click on Done to exit.
There is more help available in the room and in ANIMATE.DOC
see SCREENRM.DOC for information on ACT scripts.


#103 ACT2 Drive In Icon
     ~~~~~~~~~~~~~~~~~~~
Play the ACT2 Clips from the currently set CLIP Count Number
to the Size Number in a Window.
ACT2 can be played either full screen in 320x200 VGA
(FAST320x200VCX) or in a window (ACT2NAME).
When you use the command FAST320x200VCX in a script or
use the Projector Icon #51, the clips are written
directly to video memory using fast low level routines.
When you use the command ACT2NAME in a script, or use
the Drive In Icon, the clips are played using low level
routines, but they are not written directly to video
memory. On a 486 50mhz they are fairly fast. On a
slower machine you may want to use the faster routines.

Button 2 to start the clips and Button 1 to end the process.
see SCREENRM.DOC for information on ACT scripts and
see ANIMATE.DOC for information on ACT2 animation.


#104 Load the Current Default Knowledgebase
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have a text file that contains information you reference
regularly, you may want to make a copy of it and name it
C:\ANIPAINT\HELPDOCS\KNOWBASE.DOC
In this way whenever you need to open this file you can
click on this Icon.
You can create a large file of several small reference files
by using the File List Icon and then Combine Files Icon. The
first will create a list of pathnames and the latter will
combine them into one large file. Then when you need to find
information you can load the file with this Icon and use
Cyberfind to find the information and clip text for inclusion
in your work.
Here is a brief scenario.
You have lost some information in a group of 15 text files and
the boss want's a report in 5 minutes.
You quickly make a list of pathnames then combine the files, name
the new file C:\ANIPAINT\HELPDOCS\KNOWBASE.DOC.  (Full Pathname)
Then you Click on the Knowbase Icon.
Then Click on FIND and enter text to search for.
Then if the list of paragraphs found is longer than 1 page, print
the document with the Print Button in the Window Menu.
Click on Find again and enter the line number.
It goes to the information you seek.
Once there you can quickly navigate the entire document by
instantly referencing any text with the mouse.
Or print from line to line to clip a report.
Click on the first line to step back and forth between
finds. (Next / Previous).
If you have done this once, the second time will take less than
a couple of minutes.
If you don't know where your files are that contain the text that
you are searching for, then use Searchmode to search your hard disk
for similar filenames or use Cruise Disk and FIND to browse any drive.

#105 Reverse Picture Colors
     ~~~~~~~~~~~~~~~~~~~~~~~
If the current window contains a VCX bitmapped picture this
Icon can be used to reverse the picture. This is sometimes
necessary to correctly print the picture.

#106 Create a Presentation
     ~~~~~~~~~~~~~~~~~~~~~~
Create Stunning Presentations with:
Text in a window where you want it, a Graphic VCX Background and
animation anywhere on the screen at the same time.
This Button writes a sample Script for you to learn to
do it with an ASCII TEXT Editor. This is a command language and
you may use the commands listed when the file is made.
1) First Create or Choose a Background Picture
2) Create ACT1 animation in the Cutting Room
3) Find the text you wish to display and make note of the
names of all three files. Picture background, ACT1 and Text 4)
Select the Icon and Enter the Names.
Same as pressing Presentation in the Screening Room.
To create animation on a spot on a full screen picture,
first capture the area to animate with the Scenery Icon.
Then create your animation and paste it on the exact same
spot using this Icon. The x and y coordinates will
be listed in SHOWIT.ACT the temporary act file created with
this Icon. You have a chance to rename it when you are done.
You will know that you are on the exact spot when the
image in the act1 you are about to paste completely
cancells out the image on the full screen picture and it
becomes a black block the size of Act1 animation. (100x80)

see ANIMATE.DOC for more information

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 The Object of this program is to either load an existing file in
the Screening Room and then edit it, or draw a picture yourself.

 Once you have a picture you can add captured text for Desk Top
Publishing, or you can create an animation file, or you can
animate it as a series of clips, or you may create a Presentation
file that combines a Text Window with a Graphic Background and
Isolated animation sequences.

 Animation is done by creating a series of frames, then playing
them back quickly. If you find they are not fast enough try
animating ACT2 animation in full screen 320 x 200 mode.

You can create an animation file that you can give to someone
else. Providing they have at minimum a VGA IBM compatible
computer system. Wish someone happy birthday, ask someone to
lunch, create an advertisement, make a full length animated
cartoon, or movie, use them for employee training etc. Use your
Imagination.

Digitized Art is the wave of the future. This program is
designed with the fewest possible restrictions on it's use. I am
sure you will find ways to use it that I never dreamt of.

AniPaint (c) 1994 by Rick Sobie of Lake Cowichan B.C. Canada
PKZIP is the property of PKWARE

It is my hope that this program will -like a message in a bottle-
travel and be used throughout the world. We live in a wonderful
age of Global Communication, let us hope that technology will
bring the world together in peace instead of breaking it to
pieces as our forefathers almost did.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
************************** CyberFind ******************************

Cyberfind is an intelligent search utility.
Rather than search the next instance of the word, (which
in a large document can take a long time if the reference
you seek is the 47th instance of the word), Cyberfind clips
paragraphs to a temporary file called TEMP.LST.
Then you choose the instance you want, and go directly there.

If you combine a group of files into a Knowledgebase, then
your reference material will be easily accessed whenever
you want it. See STUDIO.DOC for more info on the Knowbase
Icon.
The Knowbase Icon loads C:\ANIPAINT\HELPDOCS\KNOWBASE.DOC
if you have created it.

Cyberfind is very simple to use once you get the hang of it.

Manual Use of Cyberfind
~~~~~~~~~~~~~~~~~~~~~~~
1)Click Button 2 on FIND in a text window.
2)Select Subject Button.
3)Enter a word or words to search for.
The word is referenced in the document and all
references are clipped to TEMP.LST.
Next TEMP.LST is loaded and you see the paragraphs.
Under each paragraph is ###***> and a line number.
4)Select Find again and Click on the Go to Line # button.
5)Enter the line number of the paragraph and the document
is once again loaded into the window only now it is at
the line # you entered.

If there are more than 1 page of clippings use Refine Search. Or
print TEMP.LST to view them better.
If automatic Cyberfind is Not disabled you may also use the
mouse. Do not be too hasty to disable automatic Cyberfind,
once you figure out how it works, you can manipulate files
very quickly with the mouse.

Refine Search Button
********************
If you have searched for a word and found a lot of references to
that word, you may want to search TEMP.LST for a second
word that will narrow the list of paragraphs down.
eg: You search for the word "disk" and you get floppy disk
and a number of other things.
Refine the search with the word "hard". Now only the
references to "hard disk" are left.

Convert Document
****************
Most Word Processors add hidden codes to a text document to tell
the program what font to use, how many spaces in a Tab, if a
picture is in the document etc.
Fine if you are viewing the file with that program. If you
want to view that file with another program, the other
program has to know what those codes are and what they mean. Each
program uses the hidden codes according to their format. However,
with thousands of word processors each adding codes their own way
it is virtually impossible to decipher them all. An easier way is
to save the file in the other program as an ASCII file ( a plain
text file without the hidden codes).

With Convert you may remove the hidden codes in a word
processor document and convert it to ASCII text. You will not
have the same document with the same fonts or anything else, but
you will have the text, providing the file is not
encrypted or compressed.
This program will not change the original but will make a
file called TEXTCNVRT.DOC. On D: if D: is available C: if not. Do
with it as you will.
This program does not edit text. There are word processors
out there better suited for this job. Text is best handled
in text mode not graphics mode. (When you are working with a DOS
application. Microsoft Windows does a superb job of
simulated text mode, while in graphics mode.)

The use of text in this program is for reference or cutting and
pasting into a picture.
See your DOS manual on ASCII text if you are not totally
familiar with it already.

What the heck is a knowledgebase?
*********************************

A knowledgebase is an Artificial Intelligence term for all
the collected information on a subject or subjects.
Usually it is formatted into categories such as Class, Member
Hierarchy etc. eg: MARE:HORSE:BOVINE:MAMMAL:LIVING THING
Do you see the connection. A Mare is a horse which is in the
family Bovine which is in the Class Mammal which is a living
thing.
The way we look at the world is thus, either something is
whole, or it is a part, or it is a general term or it is a
specialized term. (Whole/Part, Gen/Spec)
Studies have shown that the brain can handle three groups
of three things at a time, so to manipulate a vast amount of
information the brain breaks the information down and
classifies it into categories. Then it references the material
with other similar things.
With Cyberfind it uses any text document as a knowledgebase. It
is not a true knowledgebase in the pure sense of the word, but it
is a fast cheap substitute.
It cannot make suggestions based on the information there. It is
up to you to decide what is important and what is not.
It clips everything it thinks may be the information you seek and
lets you decide.

What about CASE Sensitivity?
****************************
Cyberfind simultaneously searches all CAPITALS, the first
letter Capitalized and no capitals at all.

If the word is fishBowl with the B capitalized it will not
find it. To search every word with every possible capitalized
situation takes far too long and speed is essential.
To overcome this, search fish or bowl by themselves and it
will find it.

Remember If you start a search with a smaller word you can
always refine the search.

If you are a communications fanatic like I am, you will
greatly benefit from the following. Place all your file lists and
phone numbers obtained from BBS's in one large file.
Now whenever you need information on any subject you search that
file. It will always come up with something, if you are on enough
Bulletin Boards.
If you are not familiar with communications and Bulletin
Boards or BBS's then you should be. A BBS is a private or
public library of programs and other information files that can
be accessed by a Modem and a telephone line. You call up, get
access, then request the computer on the other end to
send you the file or complete program. Information on any
subject at anytime, anywhere in the world. Just think, a
hundred years ago you would have had to send someone on
a horse.

Using Cyberfind with the Mouse
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Line up the left side of the cursor box on the first
letter of the word you want to reference and Click
Button 2. If the left side of the cursor box is not on the
first letter of the text you wish to search, it will not work.

All paragraphs containing the word, or part word, are clipped to
TEMP.LST.
Under each paragraph is ###***> and a line number.
PGDN or click Mouse Button 1 on any line that does Not contain
###***>, to see the next page of clipped paragraphs.
2)Click Button 1 on the line containing ###***> to go
directly to that line number in the original document.
The most common errors occur when the cursor inside the box or
the cursor box itself are not correctly lined
up on the word or line.
It takes a little practice to get the feel of it.
I recommend you do not disable sound while you are
learning to use Cyberfind because you will hear a click
when you click the mouse on the line # if you are using it
correctly.

If you want to reference more than one word at the same time, use
Cyberfind manually. See above.

If you find Cyberfind an unnecessary pain in the butt, then
disable Automatic Cyberfind by running CONFIGIT.EXE. then
choose Options.

Problems with Cyberfind
~~~~~~~~~~~~~~~~~~~~~~~~~
If you do not line up the cursor precisely it will not work.
Practice, you will get it.

If it takes too long, then the size of the document is too
large for the speed of your computer. Get a faster system or
divide the file into smaller files.

Why does Cyberfind find three instances of the same word?
It searches three case types: All Capitals.
                              First letter capitalized
                              No capitals.

When it is initializing, it may search all three. Just ignore the
other two.

Make sure you are using the proper mouse buttons!

Button 1 scrolls the screen unless you click it on a line
containing ###*****> then it goes to the line number.
Important: You will hear a beep or a click as it does this
if you have done it correctly. Providing you have not
disabled sound.

Button 2 references the word unless you have already
referenced it, and the file TEMP.LST is in the window already. Or
if you do not line up the cursor properly.
In that case it gives you the message "Line up the cursor"
and puts the line containing the word you tried to search at the
top of the window.

Learn how to use it and you will find it a very effective
tool for getting that elusive information off your hard disk and
onto the screen.

Cyberfind (c) 1994 by Rick Sobie
AniPaint  (c) 1994 by Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
********************* Printing Questions and Answers ********************

How do I print different fonts?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Set the font size style NLQ, Draft, Doublestrike, etc
using the printers controls on the printer.
See your printer manual or experiment with it.
or
Create a picture and use any graphic font.  See below
on printing graphics.

How do I Print Graphics?

1)Shell to DOS.
2) Enter the DOS command GRAPHICS
3) Type EXIT to Return to the program
4)If you want to print larger than 320 x 200 then change to 16
color   mode.
5) If you want to print in 256 color mode you must use 320x200
and print with landscape orientation.
6)Make the Picture Full screen by clicking on the upper left
corner  button.
7)Hold the SHIFT button and press Print Screen.
If your printer is supported by DOS it will print.
Read your DOS manual regarding the GRAPHICS command and see your
GRAPHICS.PRO file in your DOS Directory.

Is there A Better Way to print graphics?
Yes.
Export the image as a PCX with the Save Button. (registration required)
Use your favourite Printing program that supports your printer.
Almost all good word processors support the PCX format.

Another way, if you have a FAX CARD, is to print to your Fax or
to someone else's with your fax software. Good substitute for a
laser printer.

Why do I keep getting error messages when I try to print.

check Paper
check connections LPT1
check printer On
check available memory (Beside Files/Directory in
                        the File Screening Room)
The Graphics command uses memory.
See Optimizing your system in your DOS MANUAL.
load hi or remove other memory resident programs.
If printing is interrupted it will abort.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If all else fails go to DOS type :
Copy FILENAME.EXT>PRN
Filename is the file you want to print.
Prints Text only.

Export PCX, that's the key to printing with this program.

AniPaint (c)1994 Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
*************************** The Screening Room *************************

Important! If you do not have a fast computer (50 mhz +) see
     Speeding up the Program at the end of this Document.

     I have tried to make the program useable by anyone, however, if you
do not know the basics, such as that you have to press enter on the
commandline at DOS to do DOS commands, then you had better read your
DOS Manual first or at least keep it handy.

               How to use the Screening Room
               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   You have two cursor options as set by CONFIGIT.
   The ball cursor for fast machines, window cursor
   for slower machines. If you lose the cursor off screen
   click Both Buttons. The mouse cursor is not confined
   in order to allow the freedom necessary to paste pictures
   larger than the screen, or partially outside the screen.


  The current mouse button settings are shown in an Icon
  when you click on Help. In this and all other documents,
  Button 1 and Button 2 refer to Mouse Button 1 and Mouse
  Button 2. Which is which depends on how you have set the
  mouse. Use the Mouse Set Icon to reverse the Buttons if
  you wish.(who's on first?)
!  Remember! If you lose the mouse cursor click both buttons.

 PathMask Button
 ~~~~~~~~~~~~~~~
 Click on "Pathmask" and choose a file extension.
 *.PAL :Palette colors. If the new palette
           differs from the existing one, the
           colors will change.
 *.FNT :Loads a Text Font for use in the Studio.
 note:  While in a Text Window you may also alter the Font
        and it's size. If the loaded file is not a
        graphic picture, you are in a Text Window.
        See Window Action demo for more information.

 *.PCX :Load a graphic picture with this extension.
        The original is unchanged and a new file
        called VCXTEMP.VCX will be created. Use a 256
        color mode when loading PCX

 Important!: Not all PCX formats are supported.
       Specifically, Version 5, 256 colour pictures
       are supported. However, Screening Room will
       attempt to load any file. Some may be converted
       to 2 colors.If you are in 16 color mode it will
       greyscale and reduce 256 color PCX automatically
       to 16 colors.

 Very Important!!: PCX files carry palette information.
       This palette becomes the current palette.
       If the palette is all black the entire
       screen will become all black.
          If this happens, move the mouse over
       the top of the screen and click both buttons or
       hit escape. The standard menu colors will return.
       you may then load a different palette.

*.VCX :This program uses the extension VCX for 256 colour
       graphic pictures. These files also carry palette
       information. To date they are not compatible with
       other programs to my knowledge.


*.ANI :This program uses the extension ANI for animation
       files. ACT1.ANI is  created on drive D:\ if D:\
       is available. Otherwise it is created on drive
        C: . You may then process the file into
       a Presentation combing a full screen VCX with
       animation and a Text Window. See Presentations.

 *.*   :Any other file in the current directory.

 Other Extensions that you may enter on the Path Line

*.ACT  Presentation files use ACT as the file extension
       for script files. Any ASCII editor can create
       an ACT script. See Presentations for more info.
       There are several demos C:\ANIPAINT\*.ACT

*.CFG Work space files use this extension. The workspace
      is automatically saved each time you exit, but if
      you want to return to a work space that you had
      a week ago, it must first have been saved using
      the Save Button. The file list is saved as well,
      so if you have deleted files that are on the list
      after you save the work space, they will not be
      found.

*.PNT The Vector Point Trace Icon uses PNT as it's extension.
      See STUDIO.DOC.
*.RUN The Stick figures use RUN files eg:C:\ANIPAINT\SAMPVECT.RUN

VERY IMPORTANT!!
*.DOC In the HELPDOC subdirectory are the documentation
      files that accompany this program. Don't move them
      or you will disable your help buttons. If they are
      lost, reinstall the program or write me for a
      complete copy.

   The program will attempt to load any file. if it does
   not recognize the format it will load it as text.

  When you click on the PathMask button it toggles between
file extensions and the normal 4 button state.( Path, Paint,
Capture and Clear Desk).
  After you have chosen a path or entered one on the Path
Line above it, the available files with the selected
extension will appear in the directory area.
You may then click on the file to load it into a window.
Files with the extension PAL or FNT will not be put into a
window. See Window Actions demo.

Dormant Files List: Below the directory area is the dormant
   file list area. Small rectangles beside the file names
   contain the window number. The most recent file name
   rectangle is a different colour. If you click Button 2
   on the rectangle it will reload into a window.
   If the file is a graphic picture (VCX), you may paste it
   without window mechanics by clicking Button 1.
   By experimenting you will soon learn how this
   works. To view the picture as you paste, use the Paint
   Studio or Edit in a Graphic Window instead. If your system
   is capable of high resolution, you may want to do your
   paste up in higher modes 1024x768 or 1200x1024 if your
   machine has the capability. See your monitor documentation.
   If you save the workspace, the dormant file list is
   saved as well. However if you delete files then
   reload the workspace, those file names may appear
   on the list but they will not be found.

FILES/DIRECTORY: Click on the word FILES to toggle between files
   and DIRECTORIES.

   When you exit the active window it is placed on the dormant
list below the directory area. Click on the small box beside the
filename to reload the file. If the wrong file loads, either the
cursor was not lined up correctly or the list is wrong. If so use
the Clear Desk button to start a new list.
If a lined box appears the image will be loaded without
window mechanics. This is useful for pasting into other files.

CAPTURE:If the current window is in TextMode, A ruled, growing
   box appears to allow you to capture any area on the screen.
   The file will be saved as a numbered CLIP file such as
   CLP2.VCX. Subsequent Captures are saved automatically
   CLP3.VCX...CLP4.VCX ...etc.

Important!: During the creation of ACT2 animation files, if the
   current clip count is less then 20, then the clip count
   will be incremented by 20. It will use CLP21.VCX ... CLP22.VCX
   etc. for it's frame count. For more information see
   ANIMATE.DOC.

   As a rule, (pun intended) Capture also functions very well as
   a measuring stick for desktop publishing.
   Click once to anchor it then Both Buttons to capture area.
X: Anchored Left Horizontal Position.
Y: Anchored Top Vertical position.
X2:Right Horizontal position.
Y2:Bottom Vertical position.
Width:  Box Width.
Height: Box Height.

Line Height Scale: On the extreme right is a scale showing the
   line height of the current text font. This is a handy tool for
   paste up in desk top publishing. If it is in the way toggle it
   off by clicking Button 2 twice on the small S button above it.
   In the Paint Studio the File List Icon uses the Scale button
   as well to append marked files to SCRIPT.TXT
   The File List Icon is useful for creating a list of file
   path names to create a knowledgebase etc. An Experienced user
   would use this list in a batch file or combine ACT scripts to
   make a series of Presentations into one ACT file. etc.
   See File List in STUDIO.DOC

Clear Desk: Returns the Screening Room to it's initialized state.
It will also attempt to create a new blank picture when you
return to the Paint Studio. This will erase your previous work in
the two files VCXTEMP.VCX and VCXTEMP2.VCX. To prevent this
press ESCAPE when you are prompted for Width and Height.

Important!: The dormant list of file names is also reset.
  If you wish to clear the desk and retain the list, use the
  Cancel button on the top row instead.
  Remember if things get muddled, Cancel. If that is not
  sufficient, Clear Desk. Occasionally you may have trouble
  changing paths or directories or drives. If this happens
  choose Cancel then Clear Desk.

SearchMode:The green light beside FILES/DIRECTORY is a toggle
   between normal FileMode and SearchMode. Enter a search
   path on the Path Line above it or Button 1 to accept
   the current path. Drive C: will be searched for the matching
   file or files.
Example:
To search the entire C: drive for all PCX files click Button 2 on
the Green Light. It says choose path eg:*.PCX Click Button 1 to
accept the path.

   While in Searchmode the name scroller will operate 9 at a time
   as well as 1 at a time. Also the alphabet file name search
   scroll bar will operate on each directory found separately in
   directory order.

Alphabetical Name Search Scroll Bar: If you have a large number
  of files in one directory, a fast way to find a specific file
  is to click Button 2 twice on the letter which corresponds the
  closest to the first letter of the name. Then scroll down to
  it.

System Information: The small black square beside FILES/
   DIRECTORY pops up a window containing the free space
   on C: and  D: if available. Also the free Conventional
   Memory. If this number is too low the program will
   not operate correctly. Free up memory by optimizing
   your system. See your Dos manual for details.
   Examples: Load DOS into High memory. Remove memory
   resident utilities.

Vector Graphic Objects
~~~~~~~~~~~~~~~~~~~~~~
When you load an AniPaint file with the extension PNT it
is loaded into a window, with controls specifically for
vector graphics. These Objects are created in the Paint
Studio with the Point Draw and Trace Icons.
When you draw with these Icons only the file POINTS.PNT is
written to on D: if D: is available C: if not.
Copy another Vector Object onto POINTS.PNT to add more lines
to Objectname.PNT. Then save using the Save Button.
If POINTS.PNT does not exist it is created. If it exists,
it is added to. To begin a new vector object, delete
POINTS.PNT by loading it into a window and using the
right corner light button, then choose delete and OK.

These files contain a record of points and color. When they
are drawn on the screen they connect these points. In
essence, it redraws the object in the same way that it was
created.
You may Hide a series of lines, Replace the hidden lines,
Step through and edit the object one line at a time, or
Delete a series of lines.
These options are contained in the Image Button in the
window menu bar.

Hide a Series of Lines
**********************
Select the option, then click Button 2 on the color
corresponding to the lines you wish to hide. Each time you
draw with the Point Draw and Trace Icon, the edit color
is incremented by one. When you select Hide a Series, it
shows you the edit colors associated with each draw color.
The reason for this is if you make several drawings on one
page, and you want to hide some of the objects, it will
hide all lines that correspond to that edit color.
eg: You set the draw color to blue #10 and draw some lines.
    Inside POINTS.PNT (the temporary vector file) it records
    the Draw color you are using, and the X,Y, coordinates
    of the lines you are drawing, and assigns a color to
    represent that series of lines. This edit color will
    distinguish these lines from the next series of lines
    you add, even if the next series of lines use the same
    draw color as the first. Now when you hide a portion
    of your drawing, or page of drawings, you click on the
    edit color which represents the series of lines that
    you wish to mask.
    Even if you save the object using the Save Button, the
    lines remain hidden in the new drawing until you unhide
    them with the Unhide All Option.
    You may hide up to 255 separate series of lines before
    the edit color will repeat.

The Unhide Option
*****************
Select this option to reveal the series of lines that were
temporarily masked using the option above. All series of
lines that were masked are now revealed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Important Tip!
A good way to create an interesting animation sequence,
Slide Show or Presentation could be to make a detailed line
drawing, then alternate hiding series of lines and capturing
the window using the Camera Icon. In this way you can show details
as you wish. Then arrange the clips as an ACT Script.
Use BACKGROUNDNAME and READAKEY to create a Slide Show.
For example: You create a complex industrial design, architectural
             drawing etc..
             In a demonstration you step through the
             design reducing the complexity.

Make charts and graphs grow before your eyes, etc..

Remember to save and include the palette.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Important!! No PALETTE information is recorded in these files.
The line colors are relative to the current palette.
see Understanding Color in STUDIO.DOC

Step Edit Object
****************
Use this option to permanently remove unwanted lines.
No lines are showing,
Click Button 2 to display the next line from point to point.
Click Button 1 to back up. ( limited to a few backup points)
Click Both Buttons to remove the line.
Caution on a fast machine it could fly through erasing numerous or
all remaining lines. Keyboard control is safer for important drawings.
Or
Up arrow   : next line;
Down Arrow : previous line.
Delete Key : Delete line.
Position is reset to first point each time you load the file.
Changes are permanent but not removed from the file until
you choose the Save Button, and save as a Vector PNT
file.
All vector files in this program use the extension PNT
and are not compatible with any other program to date.

Delete a series of lines
************************
Similar to masking a series above except the series of lines
is permanently erased. The points are not removed from the file
until you save the object with the Save Button. This reduces
the size of the file by removing the redundant points.

Sample Objects
~~~~~~~~~~~~~~~
THe Subdirectory C:\ANIPAINT\OBJECTS is created by Configit
when you install the program.
Sample Objects are included there, you may make more.


For more Information on Vector Graphics see Vector Tools
in STUDIO.DOC

Optimizing Program Performance
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Very Important!!
   This program uses a large amount of disk space. If
   you run out of disk space the program will not
   operate correctly.
   If you have extended memory create a Virtual Drive.
    The operation of the program will be enhanced.
   Consult your DOS manual for information on Ramdrives.
   You will have to add a line to your   CONFIG.SYS file.
   Example: device=ramdrive.sys 4096 512 /e
   creates a 4 meg ramdrive with 512 byte sector size
   in extended memory. With limited memory you may not
   have a large enough number of allowed file entries
   in the root directory. 4 meg is adequate for small
   pictures. If you use higher resolutions you should
   create a ramdrive larger than 4 meg or use C:.
VERY VERY IMPORTANT!! When you shut off or reset your
   system all data on your ramdrive is permanently erased.
   You will be prompted "Backup D: C:\_DBACKUP?: Y or N"
   when you exit the program. Answer Y and all files on D:
   including subdirectories will be copied onto the
   directory C:\_DBACKUP. Use the Load Button to
   restore the backup onto D:. The result is reported in the
   file LOG.TXT. If you have a problem read this file.


   If D:\ is not available, or is disabled with the
   disable ramdrive option in CONFIGIT, C: will be used
   for temporary files. No speed differential may be
   noticed on a fast modern computer.
*  In this documentation I refer to D: as a ramdrive for
   demonstration purposes.
   You may select any drive letter for your ramdrive or
   temporary file area, by selecting the drive letter
   in the CONFIGIT options menu.

   A Dos Shell is available in the Studio (F6) and the Top
   Right corner of the Screening Room. You will probably not
   have enough memory in the shell to do more than
   enter DOS commands on the DOS command Line. See
   the "Command" command in your Dos Manual for information
   on the Dos Shell ("Command" command).
Dos Shell Note:
After you return to AniPaint it may reinitialize to the default
resolution that you had on start-up. If you need to, switch back
manually using the buttons in the Screening Room. If you expect to
be going back and forth, it may be easier to set your default graph
mode in CONFIGIT to correspond the current picture settings if your
machine is capable.

The Path Line: Click Button 2 on the Path Line to enter a
   Path or Change Drives.
   Example: D: changes to drive D:\
            A: changes to drive A:\
            B: changes to B:\
   Be sure the drive is ready first! or you will get
   the error message . Abort/Fail/Retry.
   Example path:  *.PCX
                 or FILENAME.VCX
                 or A:\*.*  etc.
   If you get an error message either make the drive
   ready or choose fail, then type C:  <enter>
   I often let DOS handle the error reporting, it messes up
   the screen but it does it so well. Why duplicate code.

    The Path line is also used for user input to
    name files when prompted.
    Scroll buttons located on both ends of the Path
    Line are used if the path is longer than the
    Path Line area.

Important! Occasionally when in the Studio you will
   be brought to the Screening Room to retrieve a file.
   For Example: To load an additional font or palette.
   A conflict may arise between the current path and the
   path needed. The Studio may persist and you will
   have to either press the "Cancel" or the "Clear Desk"
   button or use the Path Line to change the drive or
   directory.

Exit: You may be prompted to be sure everything is OK
      prior to exit. Such as, are the files saved.

      This program uses many temporary files so if
      you lose a file it may be found saved on D: if
      available, or C: in the current directory.

Load: Choose an option and load the file.

Save: Choose an option and save the file.

This program is extremely disk intensive. It uses a virtual disk
on D: instead of conventional or extended memory and falls back
to the hard drive when it's full whenever possible.
The reason for this is hard disks are much larger than available
memory. It will use a Ram Disk D: if you make one available. See
your DOS manual for information on VIRTUAL DRIVES.
The exception to this is the program itself.
It will load it's overlay file in EMS if LIM standard EMS
is available.

Saving Pictures
~~~~~~~~~~~~~~~
Export to a PCX file format
~~~~~~~~~~~~~~~~~~~~~~~~~~~
After you create a picture you may want to Print It.
Use this option to change the file from VCX into a format that other
programs can load.
Load the image into your favourite printing program.
The image is not compressed.
It is saved as an uncompressed Version 5 256 color PCX.
This is the Best way to print Graphics using AniPaint.

Important!: Although I refer to text windows as being in Text
    Mode, in reality it is simulated textmode. This program
    operates entirely in Graphics mode. The only true text
    mode is the DOS Shell and CONFIGIT. This program was
    designed to create pictures and animation. You cannot
    edit text.
    There are may fine word processors available that deal
    with text. They have spell checkers, thesauruses, and
    all the other necessary tools for editing text.

    For Beginners:
        When your computer is in Graphics mode it uses
    pixels ( or dots) to address the screen. For instance,
    when in text mode you would refer to a column and row.
    One column being 1 text character wide and 1 row being
    one text character high.
    In graphics mode the rows and columns are determined by
    how many pixels from the top left of your screen.
    In 320 X 200 resolution you have 320 dots wide by 200
    dots high. If you think of pixels as tiny lights capable
    of turning on in 1 of 256 colors you will have a
    better understanding. See Understanding Color in STUDIO.DOC.

       This program uses temporary files and
    writes over the same file names each time.
    Any time you capture an area, the program names
    it according to the current Clip Count. The clip
    count starts at 1 and will increment each time  until the
    drive is full.

        When you are creating an ACT2 animation series in
    The Paint Studio, (320 X 200), if the Clip Count is
    less than 20 it will be incremented by 20.
    Example: Current clip count is 19 the clip count
    will now be 39.
       This is to segregate your animation clips from
    your scratch work. You may override this at any
    time by incrementing or decrementing the Clip
    Count button manually. The number on the extreme
    left in the color bar in the Paint Studio is the
    current Clip Count. See Capture or Clip Count in
    STUDIO.DOC for more information.
 Technical note: Sometimes, when a clipped file is larger
    than available conventional memory you will not see
    the picture you are about to paste. Instead,
    you will see a rectangle with X's in it that
    is the size of the picture you are about to paste.
    This is to allow the greatest compatibility
    between systems that may or may not have
    EMS , XMS, working in Microsoft Windows, working
    in DOS real mode or the myriad of platforms and
    conversions for other systems.

 So... when you choose Save Picture it merely renames
     the current file.
     This program can handle very large pictures by using
     virtual memory. However as the size increases
     operational speed decreases. I recommend working
     in 640 X 480 mode and using higher resolutions
     for cutting and pasting.

Very Important! As Graphic Windows can Zoom in and Out,
     when a picture is saved, it remains at the original
     size. If not, one picture zoomed far enough out
     could totally fill your hard drive.

Try to work with files no larger than the screen resolution you
are working in. Convert large files to Clip Board files, then
save under another name if you want. Or paste smaller
files onto a large blank created with the New Pic Icon.

Temporary Files:
~~~~~~~~~~~~~~~
  These are the TEMPORARY file names this program uses and their
description. If drive D: is available it will be used, otherwise
drive C: will be used. If D: is available they will be erased
when you shut off or reset your computer. If C: is used they may
be overwritten.

ACT1.ANI: Sequential animation file created in the cutting room.
  if this file exists it is added to. If it does not
  exist it is created. You may do many weird and wonderful
  things with these files. 100 X 80 zoomable upward.
  See ACT1 in STUDIO.DOC or ANIMATE.DOC or the HELP
  Button in the Cutting Room.

CLP#####.VCX: Captured areas of the screen. These files Carry
         palette information and are zoomable.

GREYTEMP.VCX: When you sort the color of a picture in the Paint
              Studio, this file is created.
              See Understanding Color in STUDIO.DOC.

POINTS.PNT: This file is a record of points created when you
            draw lines with certain tools.
            See the Point Trace Icon in the Studio.

DIRTEMP#.TXT:Used by Screening Room to store the current
             directory lists.

ZOOM#.VCX: Used by the Studio for scenery and various occasions
           to cache temporary information to disk in between zooms.

TEMP.PAL: When you load a 256 color PCX file the palette is
          saved during it's conversion to VCX under this name.
          Known mostly throughout the program as Color Palette #1.

GREYSCAL.PAL: When you load a 256 color PCX file the palette is
          automatically converted to greyscale and saved under
          this name. Known mostly throughout the program as Color
          Palette #2. It is not sorted. See Understanding Color.

 note:If you choose the color button in a window and nothing
      happens at COLOR 1 or COLOR 2 other than a click,
      it is because these files do not exist. They are only
      created by loading a PCX file. No problem.
      See Understanding Color for more information.

TEMP.VAL: Used for program operational purposes.

TEMP.LST: The Cyberfind clip board. see Cyberfind.

Remember: These files evaporate -if D: is available- when
   you shut off or reset your system unless you copy them to
   C: and change the name or use the Save Button.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IMPORTANT! Although many other programs use these same
extensions for their own purposes, they are not compatible.
Only by Exporting as a PCX can another program use a file created
by AniPaint as of the time of this writing.

WARNING!!! If you attempt to load a file with the extension PAL
or FNT or VCX or PNT or VAL or ANI that was not created by
AniPaint, you may have to reboot your system causing loss of your
currently unsaved work.
Some safeguards are in place but they are not fool proof.
Do so at your own risk.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Resolution Buttons: At the bottom of the Screening Room are
   Buttons which - if you have the hardware installed and
   the appropriate monitor and mode switching is not disabled
   -will change the current screen resolution.
   If your system does not have this capability { sigh } the
   text may get larger but that is all.
   You need a SVGA monitor, a Paradise,Trident or VESA compatible
   Video Card with at least 1 meg of on board memory for
   Christmas. While you are at it, get a 486 66 mhz with a 210
   meg hard drive, 8 meg of extended memory, a graphic excelerator
   card, a tape drive for backing up your animated movies and
   a sound board.
If you are still using a 286 with VGA, it's O.K. see speeding up
the program. The 286 is a fine machine. If you are still using an
XT with a CGA I'm sorry you cannot use this program. I still have
an old XT Turbo as well, it makes a fine paper weight.



The Alternate File List Button
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have poor eyesight or are working in modes 1024x768 or
higher, you may have difficulty seeing the file names in the
directory area. If this is the case, use this button to view the
list full screen in large text.

If you are in 320x200 mode this is the only dormant list you
have.

If the Files/Directory toggle is currently set to Files the
filenames of the current directory are shown.

If the Files/Directory toggle is currently set to Directory the
filenames of the Dormant File List are shown.

Click Button 2 on the file name to retrieve the file or Button 1
to return to the normal screen.

The Consecutive Load Button
~~~~~~~~~~~~~~~~~~~~~~~~~~~
On the Bottom Left of the Screening Room is a light button that
is green when Files/Directory is set to Files and Blue if not.

If the Light Button is Green then you may click Button 2 on it to
consecutively load and view all marked files in the current
Directory.

Another way to do this is to
1) Use searchmode to search your disk.
2) Click Button 1 on the area right of the alphabet list in the
Directory area.
All files are marked and the consecutive load option is
activated. It only operates this way while searchmode is active.

The Presentation Button
~~~~~~~~~~~~~~~~~~~~~~~
Click Button 2 on this button or use the last Icon in the
Paint studio to combine a full screen VCX with an ACT1
animation series, and a text window.
Once you have followed the ongoing instructions, you will
be shown the script file that has been written.
These script files are ASCII text and may be altered at any time.
Just use any word processor or text editor and save
as an ASCII file. ( no hidden codes)
See your DOS Manual on ASCII files for more info.

Once you have a script you may play it at any time by loading the
file like any other in the Screening Room, by clicking Button 2
on the file name.
The utility called PLAYACT1.EXE is not included in this release
due to size constraints but you can request one when you
register.
Playact1 is a stand alone player that has a powerful script language
and is used to play ACT script files independent of this program.

Suppose you wanted to give an animation series to someone that
did not have Anipaint, you could give them all the files
contained in the script, the script file (ACT extension)
and the player to view them.( PLAYACT1.EXE)
(better still, give them an entire, original, unregistered
copy of AniPaint)

The command syntax for Playact1 is:

PLAYACT1 <NAME.ACT>
<VGA>or<SVGA><SVGA2><SVGA3><SVGA4><SVGA16> Inside ScriptFile
the script command syntax is: COMMANDNAME:COMMAND Available
commandnames are:
SETPALETTENAME: Load an AniPaint Palette file. ACT2 needs this.
ACT1FRAMEDELAY: Delay between ACT1 animation frames.
READAKEY:       Get keyboard or mouse activity.
TIMEDELAY:      Also for delay between ACT2 animation frames.
ZOOMFACTOR:     Size multiplier for ACT1 Animation
ACT1POSX:       ACT1 Left Starting Point
ACT1POSY:       ACT1 Top Starting Point
TEXTFILESTARTX: Left Text Window Starting Point
TEXTFILESTARTY: Top Text Window Starting Point
TEXTFILEENDX:   Right Text Window Ending Point
TEXTFILEENDY:   Bottom Text Window Ending Point
WINDOWFONT#:    A Number from 1 to 10
WINDOWFONTSIZE#:A Number from 1 to 10
ACT1BACKGROUNDCOLOR#: A Number from 0 to 255 (for solid background)
BACKGROUNDNAME: Name of full screen                      *.VCX
ACT1NAME:       Name of ACT1 Animation File              *.ANI
TEXTFILENAME:   Name of Text File to display 1 page      *.*
LIVEDOCFILENAME: Allows user to PGUP and PGDN etc.       *.*
TEXTLINE#:Text file is opened at this line number in a closed window.
FAST320x200VCX: 320x200 ACT2 animation frame filename.   *.VCX
FAST320x200VCX can only be played in 320x200 VGA resolution
ACT2POSX:       ACT2 Left Starting Point
ACT2POSY:       ACT2 Top Starting Point
ACT2NAME:    320x200 ACT2 animation anywhere.            *.VCX
Important! SVGA 256 color mode, any resolution, required for ACT2NAME:
REPEATSTART:       Marker of place to start repeating until ESC.
REPEATEND:         End of repeat marker. (goes to REPEATSTART)
Important! REPEATSTART and REPEATEND suspend palette changes until
the command SETPALETTENAME is encountered to prevent screen flash
between short animation sequences that repeat.
ACT1NOCOLOR#: Will not cover this color with ACT1 animation.
              It will play around it. eg:one color text on location
OBJECTPOSX: Left start position for vector object
OBJECTPOSX: Right start position for vector object
OBJECTNAME: Name of vector object to draw on the screen   *.PNT
TEXTFONT#: Raw Text font from 0 to 10
TEXTSIZE#: Raw Text Size from 0 to 10
TEXTATX: Raw Text Left start point
TEXTATY:Raw Text Top start point
RAWTEXT: Simple text output at specified location
RAWTEXTCOLOR#:Makes the Raw Text this color.
NOPALETTE: Prevents VCX or ANI from loading their palette
           Short animation sequences flash slightly when
           they load their palette. More noticable when
           it repeats. This solves the problem.
           Use SETPALETTENAME: without a palette name
           to turn palette load back on.
CLEARIT: Clears the screen.

Comments are allowed on a line by themselves.
ALL COMMANDS MUST BE IN CAPITAL LETTERS
any commands below this line are ACTED upon
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You may set the repeat markers anywhere below the line.
It will play the script, and when it reaches REPEATEND in will
go back to REPEATSTART and play until the user presses the
ESC key.

When you use the Presentation button, an ACT file is created. You
may add to it or make one yourself with an ASCII editor.


Important! If you do not enter the screen resolution it will
default to autodetection. Not quite want you wanted if the files
in the script are 256 color high resolution VCX or ANI files.
Not all computers support all the available screen resolutions.
It may not work on some computers. You should not use it on a
monitor with less that VGA capabilities .

Not everyone would know to enter PLAYACT1 /h for help on the DOS
commandline. So include instructions to users that are unfamiliar
with Anipaint.
SVGA16 is VESA 16 color 800 x 600. Many computers support the
VESA standard. So most SVGA monitors should be able to use this
high resolution if they have the memory.
16 color modes are about 10 times slower than SVGA 256 modes.

If you want it to show in high res 256 colors, create the images
in 256 color mode. If you want it to show 16 color images, create
the images in 16 color mode.
Important note! 256 color photographic images will not look
correct when viewed in 16 color mode. Test the script in 16 color
mode before you give it to the world and adjust the color and
palettes or provide viewing instructions. Convert 256 color
photographic images to 16 color by being in 16 color mode when you
load the PCX. Try all the palettes in the Palettes subdirectory
until you find one that is suitable for your image, after conversion.
WOOD.PAL is a good scaled palette in shades of brown.
There are an unlimited number of uses for these scripts.
Make a movie, make a slide show, make a dictionary, use them for
instruction, for business shows, for showing off your artistic
talents, send a moving message, etc etc etc....

There are several ACT scripts included to illustrate ACT scripts.
SVGADEMO.ACT, VGADEMO.ACT and 16DEMO.ACT are 3 scripts I have made
to illustrate ACT animation. Load an ACT script into AniPaint like
any other file, or use PLAYACT1 to play the script. I could not
include any ACT2 animation with this release because of the size of
the files. Each frame is more than 64,000 bytes. This release is
meant to be transferred via modem in a reasonable period of time.
Make a series of ACT2 clips yourself and try to make your own script.
It may be challenging at first, but if you persevere you will
get it. Try making copies of the included scripts and editing out
the ACT1 filenames and replace them with ACT2 commands.

If you don't have Playact1 then load the ACT file in the
Screening Room like any other file. First it will play the
script then it will load the text.
Important!!!

If you want speed, you are far better off to create ACT2 animation
sequences in VGA 320x200 256 color mode. These are assembler
routines that throw images directly into video memory.
The majority of computers in use today (at the time of this
writing) are below 33 mhz. To properly view ACT1 animation
you need a 50 mhz system. Keep this in mind if you are appealing
to a large audience with your presentation files, or they are
intended for varied machines.

You can play ACT2 animation anywhere on the screen. The commands
ACT2POSX , ACT2POSY, TIMEDELAY, SETPALETTENAME and ACT2NAME, are all
you need. A new room called the ACT2 Room has been created to make
script writing a snap. Check it out. Requires a medium fast machine.


PLAYACT1.EXE may be freely distributed for private use but
remains the intellectual property of Rick Sobie.


Speeding Up the Program
~~~~~~~~~~~~~~~~~~~~~~~~~
This program was designed for use with a modern computer with
plenty of memory and disk space, and at least a speed of 50 mhz.
It can still be used by a 286 16 mhz, although not as effectively.
If you have a slower machine, follow these guidelines and you will
get more enjoyment out of this program.

For slower machines:

Use ACT2 animation in 320x200 mode instead of ACT1 animation that
is created in the Cutting Room. See STUDIO.DOC or ANIMATE.DOC for
information on ACT2 animation. You may create ACT1 in the Cutting
Room then convert ACT1 to ACT2 animation.
ACT1 animation when used with any 16 color palette may be too slow
unless you have a very fast machine. Used with a 256 color palette,
it is faster, but still requires a computer speed of about 50 mhz
to look real.


Set all animation delays to 0 whenever possible.
        ~~~~~~~~~
Important!!! Do not set mouse delays to 0 or you may disable the
program. Use CONFIGIT to determine your optimum mouse delay.
Or, set mouse using the Mouse Set Icon in The Paint Studio.

Pictures that are zoomed out scroll much faster in a graphic
window. Use zoom as much as possible.

To clear the screen press F3
To save the screen press ALT-S
To undo Press ALT-U
To load the primary file press ALT-L
To quickly load the vector file POINTS.PNT hit F3 then ALT-P

CTRL-R Arrow, CTRL-L Arrow, PGUP, PGDN all scroll screen
contents faster than mouse control.

If screen refresh is too slow for you interupt it with space bar.
Caution! don't interupt a save in progress or the file may be
incorrect.

Confine your Knowledgebase files to a small size. 200 k is
probably about maximum for a slow machine. Searching and
scrolling large text files is too slow if the file is too large.

Work in 320x200 VGA 256 color mode as much as possible.
Refreshing the screen at high resolution with a slow system can
seem like an eternity.
(1200x1024 is over 1,200,000 bytes, 320x200 64,000)

Avoid using the pathmask *.* Be more specific *.DOC it will take
less time for the program to manage the file list.

Work with smaller pictures.
Choose the New Pic Icon and enter the size 320 wide by 200
long and work in VGA 256 320x200 mode. Select Full screen in the
Paint Studio to have a larger work area. Use the cursor keys or
PGUP or PGDN to move the picture around at full screen.
Cut up larger files into  a manageable size.

You can convert a large image by zooming it in, then choosing the
Edit button and capturing the window contents. Then save the Clip
Board file under another name.

Reduce the size of an Image before you greyscale it.

Cut up your Clip art files into smaller files. The Clip art
size, is only the suggested size. It is loaded like any other
graphic VCX. However to stamp the clips using the Clip Art Icon
in the Studio, each stamp should fit in the clip art window.
If you are working in 320x200, Icon size stamps are best.
They are 32x32 and can be made using the New Stamp Icon.
To reduce the size of the existing clip art library,
cut and paste onto a blank made with the New Pic Icon.
Select a width of about 200. Make as many Stamp Files as
you want. Just increase the current Stamp Maximum Number
in CONFIGIT Options Menu. Clip Art Libraries are named according
to number.
     eg:
        C:\ANIPAINT\STAMPS\STAMP1.VCX
        C:\ANIPAINT\STAMPS\STAMP2.VCX
        C:\ANIPAINT\STAMPS\STAMP3.VCX ...

Name your clip art libraries this way and and you will be able
to switch libraries, while under the controls of the Clip Art Icon.
Rember to set the Size Number before pressing the Clip Art Icon.
Clip art is zoomable according to the Size Number.
The New Clip Art Icon has a preset width, so use the New Pic Icon
instead, to make small width blank clip art libraries.

Use the scroll bars to scroll images instead of the scroll
buttons. The scroll bar moves the image 1/20th it's width or
height and the scroll buttons move it 1 pixel and 40 pixels
depending on which Mouse button you use.

Disable UNDO REDO. When Auto Save is activated ( by default) it
saves the image between each operation. A very time consuming
endeavour for a slow machine. The convenience of being able to
UNO and REDO may not be worth the sacrifice in speed.
Run CONFIGIT.EXE to disable AUTOSAVE. You will have no UNDO
capabilities but you may still use the capture tools such as the
camera,to save the screen. Or use the Autosave Icons
manually.

If you are running this program under Microsoft Windows, try
exiting windows and running the program at DOS. It may speed the
drivers up considerably. The file ANIPAINT.PIF is included for
you to use. Check this file to be sure it is set correctly for
your system.

Try optimizing your system. If you have a bit of extra memory it
may be used by the program to load it's overlay into EMS. see
your DOS manual on Optimizing your System.

If you have a SVGA avoid using the 16 color modes. They are at
least ten times slower.

If all these measures do not help I am sorry. To create a modern
program that is geared for an old machine is not logical.
Save your money and buy a modern machine and run AniPaint
the way it was intended to be used. You won't be disappointed.

I hereby apologize for any incorrect information or grammatical
errors that may or may not be present. There is always someone
who says "Yeah the program was great, but I found a spelling
error in the Documentation". I claim literary license.

See README.1ST for licensing and disclaimers.

Anipaint (c) 1994 Rick Sobie.
Playact1 (c) 1994 Rick Sobie
Configit (c) 1994 Rick Sobie
Cyberfind (c) 1994 Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
*************************** The Cutting Room ******************

This Document is also loaded by the Lower HELP Button
in the Cutting Room.(if you are not there now)

Important! The Cutting Room Only saves frames to ACT1.ANI
on D:\ if D: is available, C: if not. If you want to add
frames to an existing animation, or start a new sequence,
see below.


The Cutting Room Icons
~~~~~~~~~~~~~~~~~~~~~~~
If you lose the cursor, click Both Buttons and it will
be homed at the top of the Animation Window.

To load the Current VCX into the Work Window, press ALT+L.
Then use ( CTRL+ -> ), (CTRL + <- ), (PGUP), and (PGDN) to position
the image in the Work Window.

The Arrows Away From I Icon
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use this Icon to Zoom the Image in the small Animation
Window into the Large Work Window.

Under the Icon is a toggle to exclude the currently set
Left Color and Right Color ( as set by clicking on the
color bar).If the toggle is ON ,it excludes these colors.
Click Button 2 on the small rectangle containing Off to
turn this feature on and Click on it again to turn it off.

The Clear Icon
~~~~~~~~~~~~~~~~
Click Button 2 on the Icon to clear the screen.

Under the Icon is a toggle. Set to Both, it clears both
windows. Set to small, it clears only the animation
window, and set to Large, it clears the Large Window.

The Arrows Towards I Icon
~~~~~~~~~~~~~~~~~~~~~~~~~
Use this Icon to Shrink the Image in the Large Work
Window into the small Animation Window.

Under the Icon is a toggle to exclude the currently set
Left Color and Right Color ( as set by clicking on the
color bar).
If the toggle is ON then it excludes these colors. Click
Button 2 on the small rectangle containing Off to turn
this feature on and Click on it again to turn it off.

The Zoom and scroll Buttons
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use these Buttons if you have selected the Scenery Icon
prior to entering the Cutting Room. The Scenery Icon
Captures the screen and blows up a portion of it into
the Work Window and sits waiting to be called by either
the scroll buttons to the left of the animation window
or the Zoom button.
When you use the Zoom button you may zoom out on the
scenery that you captured and thereby view more of the
scenery.

Ideally, you should capture the centre of an area of
scenery in the largest screen resolution your machine
can manage. In this way, you can zoom in and out with
the zoom button to give the effect of distance. Used
in conjunction with the scroll buttons beside the
animation window, you are able to Pan and Zoom like a
video camera.
Experiment with it to see how it works. First capture
an area with the Scenery Icon, then try the zoom and
scroll buttons.
Once you have a scenery captured you can superimpose
an image onto the scenery.
1) Load or draw an image in the large work window.
2) Use the zoom and scroll buttons to position the
   captured scenery in the small animation window.
3) Click on the rectangle area below the Arrows towards
I Icon, to exclude color. It should read On.
4) Select both right and left colors as the background
color of the image in the large work window.
4) choose the Arrows towards I Icon to shrink the image
into the animation window. Because you have excluded
the background color, only the image itself is copied
into the small window thereby superimposing it on the
scenery.
5) Choose the Act1 action board to capture the frame.

Alternate with the Zoom and Scroll buttons, then
superimpose the image again, save the frame again.
There are many special effects that can be added to
your animations in this fashion.

If you hear a beep when you click on Zoom or the scroll
buttons, it is because you have not captured any scenery
yet. No problem.
If sound is disabled you will hear nothing.
I do not recommend disabling sound, if you want a more
quiet sound then reduce error delays with the Mouse
Set Icon.
The scenery Icon is also used to locate ACT1 animation on
a full screen Picture. Use the Presentation button to paste
your animation on the exact location on the page.

The Color Button
~~~~~~~~~~~~~~~~
The same button that is on the Menu Bar of any Graphic
Window.
Cycle through the palettes by clicking Button 2 on the
Color Button until you find one that suits you. You may
add new palettes to Color Buttons by replacing one of
the existing menu colors in the Palette Directory or by
installing a new menu palette using CONFIGIT.EXE. Color
Number 2 on this button reads the palette from the
current ACT1.ANI animation.
Color number 1 is the greyscaled version of the last
PCX that you loaded. It is GREYSCAL.PAL on D: if D:
is available or C: if not. The remainder of the color
numbers in this button are the menu colors found in
C:\ANIPAINT\PALETTES\MENU#.PAL.
To add or replace a menu color on this button:

Replace any MENU Color in this directory with another
ANIPAINT palette or use CONFIGIT to change the MAXIMUM
menu color number. Then name your new palette the next
number in sequence.

The Animation Window
~~~~~~~~~~~~~~~~~~~~
When you Click on the Action Board anything presently
appearing in the Animation Window is captured as an
ACT1 frame.
If you click on the Animation Window just prior to
clicking on the Projector Icon you will be transported
to 320x200 mode for viewing of your current ACT1
animation sequence.
Both Buttons at the same time brings you back to normal
640x480 mode.

The Clip Board Icon
~~~~~~~~~~~~~~~~~~~
Appearing on the Clip Board is the Current Clip Count
Number as set by clicking Button 2 on the Clip Count
area to the left of the color bar in the left color
rectangle.
When a clip is captured using any capture tool, this
number is automatically incremented prior to capture.
If you click on this Icon you will load the pop up
cut and paste menu.
You may convert ACT1 animation to ACT2 animation
with one of the options there.
If you have a slow machine this will require patience.
If you have VGA only, go to 640x480 mode, load the
ACT1 series to convert into a window.
Use the Color Button in the window to change the palette
if you want.
Capture frames by the EDIT Menu button or press
ALT+E on the keyboard.
If the Clip Count number is less than 20, it will
start at 21 and increment automatically. After you
capture the ACT2 frame, Click on FRAME. The
next ACT1 frame will be displayed in the window.
Continue switching frames and saving ACT2.
Then go to the Paint Studio and set the Left Clip Count
to 21 and the Right size number to 21+ the number of
frames you made.(Usually the Clipcount number before
you changed it to 21).

With a reasonably fast computer you can convert
ACT1 to ACT2 in the Cutting Room with the Clip
Board Icon.
When you select Convert to ACT2 it captures the small
animation contents to the next available Clip Count
number. The same format of incrementing automatically
is used each time the area is captured. If the current
clip count is less than 20 it is incremented by 20.
A 320x200 background is added to ensure that the size
of the frame is 320x200, an absolute requirement for
ACT2 animation frames. You may set the left (fill)
color and fill style (The Fill Style Icon) prior to
capturing the ACT2 frame. Once captured, you may edit
the ACT2 frame with any of the tools by loading it into
a window using the Paste Icon. Use the Bluescreen Icon
to add a background picture to the frame if you want.

Alternate between the small rectangular area below the
Projector (in the Cutting Room), this loads the ACT1
frames into the small animation window, and the Convert
ACT2 button, found in the Clip Board Icon.
The advantage to converting is ACT2 animation plays
back faster, and at full screen 320x200 resolution.
The disadvantage is that they can not be zoomed.

The remaining options in the Clip Board Icon are self
explanatory. If you need help, see the Cut Poly
Icon in STUDIO.DOC

The Crayons
~~~~~~~~~~~~
This Icon saves the current palette to the current ACT1
animation sequence file.
Replace the ACT1 palette by making a different palette
the current palette using the color button, then click
on this Icon with Mouse Button 2.

The Story Board
~~~~~~~~~~~~~~~~
1) Click B2 below Projector Icon to set storyboard first frame.
2) Click B2 on the Story Board Icon.
3) Click B2 on a frame, frame loads into small window.
4) Click B1 on frame, contents of small window replace frame.
5) Both B Done .
Once you have made a few clips you can load the frames
in series, into the large work window. They are
positioned 5 across by 5 long. First set the start
frame you want loaded into the story board by clicking
below the projector Icon. When the story board loads
it will start with this frame number.
Click Button 2 on a frame in the large window and it
loads into the animation window.
Click button 1 and the frame in the animation window
replaces the frame you clicked on.
When the cursor is a magnifying glass this option is
activated and the Story Board is active.
To try an example, Load C:\ANIPAINT\DEMOS\DINO4.ANI
into a window in the Screening Room.
Go to the Cutting Room, set the number below the projector
to 1. Click on the Story Board.
Remember, if you ever want to replace your included demos
with originals you can reinstall them in Configit.
All palettes, clipart, animation demos etc. will be
replaced with originals.

The Action Board
~~~~~~~~~~~~~~~~~
Quiet on the set, roll em. Click Button 2 on the Icon to
save the frame as the next in the series.

Important!!: ACT1 animation uses the temporary file
called ACT1.ANI.
If it exists it is added to. If it does not exist it is
created.
If you are starting a new sequence and ACT1.ANI already
exists,
1) Go to the Screening Room
2) Load ACT1.ANI into a window (It will be on D: if D:
is available or on C: if not.
3) Select the window's right corner light button and
delete the file.
4) Return to the Studio and begin your animation. ACT1
will be recreated.
Once you have created a sequence and you want to save it.
You cannot save an ACT1 animation in the Paint Studio.
You must be in the Screening Room and ACT1.ANI must
be the current file.

If you are using D:

1)Press ESC to go immediately to the Screening Room
2)Enter D: on the pathline
3)Click on the word Directory to get files
4)Click Button 2 on ACT1.ANI (it loads into a window)
  Try out the sequence if you want.
5)Click outside the window. (It closes)
6)Click on the Save Button and select Save ACT1
7)Enter a new name for the ACT1 sequence you created  a new
 copy under a different name is created.

If you are using C: omit the reference to D:

If you want to load an ACT1 sequence previously saved
under another name then you must select the Load Button
to add to that sequence. You may use the story board
and replace frames, edit frames, swap frames etc.
but you can not add to it. You must copy the previous
file onto ACT1.ANI using the Load Button to make it
current for adding to.

This may seem awkward but there are very good reasons
why AniPaint reserves temporary files for some
processes. Better program control, working on copies
protects your valuable work, faster process execution,
less File I/O errors, better memory control etc...

So.. when you use the Load ACT1 option, the previously
saved animation sequence is copied onto ACT1.ANI.

Now when you choose the Action Icon in the Cutting Room
the frame is added to ACT1.ANI. Again when you are done
Save the sequence under the original name or choose
another name, but keep the same extension .ANI
All ACT1 animation must have the extension ANI or it is
not considered an ACT1 animation file.

To review the above:
New Sequence:  Delete the old ACT1.ANI
Load Sequence: Choose Load Button.
Save Sequence: Screening Room, ACT1.ANI in Window then
               choose Save button.

If you follow this format, you will not confuse the
program, and you will work on copies, keeping your
originals intact.

Under the Action Board is a rectangle showing the current
frame number when the sequence is played or the frame is
captured to ACT1.ANI.


Important!!
Load ACT1.ANI into a window like any other file by
clicking on the name as it appears in the directory area.

When you load a previously saved ACT1 sequence, use the
Load button.
It copies the old sequence onto ACT1.ANI.
Example: You save a sequence using the Save Button and
         call it NEWNAME.ANI.
         Then the next day you want to add more frames
         to NEWNAME.ANI so you use the LOAD Button
         It says One File Copied if everything is O.K.
         It has copied the contents of NEWNAME.ANI
         onto ACT1.ANI. Now you may add to, or edit
         ACT1.ANI.
If this is not clear read it again until it is.

If you do not follow these rules you may confuse the
program or yourself.

The Projector Icon
~~~~~~~~~~~~~~~~~~
The projector plays the current animation sequence in
the animation window. It will play the current ACT1
sequence that you load from disk, or ACT1.ANI depending
on which is the most current.
Even though it may play any ACT1 file, you cannot edit
the file until you load ACT1.ANI. A bit of confusion
may arise if you are viewing a sequence and start
saving frames. The frames will only be added to
the file ACT1.ANI, not the animation sequence that
you loaded from disk.

If it is confused or cannot find the sequence then you
will get the message File ACT1.ANI Not Found.

If you Click Button 2 on the Animation Window just prior
to selecting the projector, you will be transported to
320x200 mode for viewing. (providing mode switching is
not currently disabled in CONFIGIT.)
Click Both Buttons to return to normal mode.

Under the Projector Icon is a rectangle. When you Click
Button 2 in this area the next frame is shown in the
window. If you Click Button 1 in this rectangle then the
previous frame is displayed in the window.
Use this area to Step back and forth to test parts of
your sequence or to load frames for capture to ACT2
animation conversions.
This is also the first frame number that will be displayed
by the story board.

The Clock Icon
~~~~~~~~~~~~~~
Use this Icon to set the delay between frames in
milliseconds. 100 is about right for my computer, yours
may be different.
Once an ACT1 sequence is in a window, as loaded in the
Screening Room, you may adjust the delay using the
options menu button.

If you want to vary the delay for more realistic
animation then use an ACT Script with different
ACT1FRAMEDELAY's between different ACT1 sequences.
Remember an ACT1 sequence can be only one frame if
you want.

See Presentations for more information on ACT scripts
in STUDIO.DOC or ANIMATE.DOC

The Scrolling Icons
~~~~~~~~~~~~~~~~~~~
These three Icon areas contain all the Icons in the
upper Icon Bar.

For convienience you can scroll these Icons and use them
without leaving the Cutting room. Apply any tool to the
Large Work Window.
However, if the tool requires going to the Screening Room
it will be suspended unti you press DONE.
Use them on your image in the Large window then Shrink
the image into the small animation window using the
Arrows Towards I Icon.

You cannot directly apply these tools to the small
animation window while in the Cutting Room. You must
first press DONE, then you may work on it like any
other picture.

Remember to set the Size Number before using any tool.
Rectangular Box Cursors shrink and grow when in  contact
with the Large Window edges.

The DONE ICON
~~~~~~~~~~~~~~
Esc takes you immediately to the Screening Room.
If you are in EGA mode you will not see the Bottom Icons,
there is not enough room on the screen. Just press ESC when
you want to exit.

The Lone Paintbrush Icon
~~~~~~~~~~~~~~~~~~~~~~~~
Use this Icon to replace any color in the Large and
small windows with the Right Color. (the color to the
extreme right of the color bar)
1) Select a Right Color
2) Select the Lone Paintbrush Icon
3) Click Button 2 on the color to be replaced in the
   Large Work window.
   The color touched is swapped with the Right Color.
This is not a flood fill tool.

The Paint Brushes Icon
~~~~~~~~~~~~~~~~~~~~~~
Use this Icon to draw with blocks that are immediately
reflected into the animation window. The size of the
block is determined by Clicking Mouse Button 1 or 2 on
the Paint Brushes Icon. The size number of the blocks
is shown in the rectangular area below the Icon. (1..3)
A size of 1 shows up in the animation window as a dot
pattern for use as shading. Size 2 and up shows up as
solid.

Here is the tricky part:
Once you press this Icon you are in Block Draw mode.
Before this, you could select a Right and Left Color by
clicking directly on the color in the large work window.
However, once you activate the Block Draw, you have to
set the Right and Left Colors by clicking on the
Color Bar.
Button 1 draws blocks in the Left Color and Button 2
draws blocks in the Right Color.

To return to normal mode (not Block Draw) select another
Icon or click both buttons at the same time. The Block
Draw option will be deactivated.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Cutting Room is capable of many things and takes
practice to master. Create ACT1 animation then share
it with your friends. Give the player, PLAYACT1 along
with the sequence and they will be able to view them
even if they do not have AniPaint. You must now register
to receive the player Playact1 by request. You can use
CONFIGIT to create an unregistered copy of AniPaint,
or give your original compressed copy.
You will have hours of fun creating your own movies.

AniPaint (c) 1994 by Rick Sobie
PLAYACT1 (c) 1994 by Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
******  Help Index *******

Like all AniPaint Text Files, All words can
be instantly referenced by clicking Button 2 on
the word, Then click Button 1 on   ###***>
to go directly to the corresponding line#.
The Find button operates the same way without
use of the mouse.
If automatic is disabled in CONFIGIT you must
use Cyberfind manually.
If you are using 320x200 mode this document
is half width to allow better viewing.
Enter the key word you want to
search with the Find Button. With
Cyberfind indexing is unnecessary.
For lack of a better name I called it
Help Index.
It really isn't indexed at all.
(literary license)

Palette
~~~~~~~
* What is a palette
A palette is a record of Red Green
and Blue Values that when mixed
together in varied amounts create
the drawing and painting colors.

* Load a palette from disk
To load a palette from disk either
1) In the Studio
Click on the crayons then click
button 1 on the file name in the
screening room.
2) From the Screening Room
Change to Palettes subdirectory
Choose pathmask *.PAL
Click button 1 on the filename

* Create a new palette
Either cut and paste from existing
palettes or use the Palette Icons
to blend each individually.

* Alter an existing palette
First load a palette from disk or
load a picture containing palette
information.
Then do same as above.

* Cut and Paste palette colors
1)Use the CutPaste Palette Icon.
It saves the colors from the
lowest color number to the highest
color number to TEMPMENU.PAL.
Then paste the palette beginning
with the current Left color.

* Capture a palette from a picture
In the Screening Room
1)Load the picture.
2)Exit the window.
3) Choose Save Button then
choose Save Palette under new name.

* Change the Current palette
Either
1)Load new palette.
or
2)Choose color button in graphic
window.
or
3)Load Picture
or
4)Click both buttons above top
of screen.
or
5)Use Icons to Alter Palette
or
6)Use Menu Colors Icon

* Change a picture's palette record
Select the Picture Color Icon to
write the current palette to the
current picture file.

* Greyscale a palette
Choose the Grey Scale Icon.
GREYTEMP.VCX will replace the
current picture. A color sorted
copy of your picture with 256 shades
of grey.

* Sort palette colors
Same as above. The colors are sorted
but not changed to grey.

* Change one palette color
Choose the Painters Palette Icon #6
Choose the color to be altered.
Blend color by clicking on colors.

* Change the default Menu palette
1) Rename MENU1.PAL
2) Rename your new palette MENU1.PAL

* Add a menu Palette
 Run CONFIGIT.EXE
Change Maximum Menu Palettes
Rename your palette MENU?.PAL
where ? is the new maximum.

* Finding a lost palette
In a graphic window, click on
COLOR and cycle through all the
palettes. If it is not found try
loading each palette from disk.
If still not found, rename your
current picture and reload the
original from disk.

* Saving a palette to disk
Choose the Save Button then
choose Save Palette.

* Prevent Palette changing
In a graphic window press Button 1
on Color. Palette changes.
Press Button 2 palette changes back.
Once the Color button is pressed the
program will not alter the palette.

* 16 color palette
Vga monitors can only show 256
colors in 320x200 mode.In 640x480
use the palette files with 16 in the
name. Read manual.

Color
~~~~~~~
Understanding Color
see STUDIO.DOC.

* What are color numbers
Each color is assigned a number from
0 to 255. Located in the STUDIO top
left corner - when you click Button
1 on any color - is the LEFT Color
number. Click Button 2 to change the
Right Color number shown top right.

* Why does white/black color change
White and black are reserved by the
program as White #255 Black #0
to maintain readability of Icons
and text instructions.
See understanding color and below.

* Override white/black picture changes
In a graphic window, click on Color.
Override is now on.

* 16 colors
The maximum # of colors for a VGA
monitor in 640x480 mode.

* 256 colors
The maximum # of colors for SVGA
in this program.

* Color changes between programs
Some programs reserve colors for
program menu use etc.
Some programs use the palette record
differently. Trial and error is the
only way to find out which.

* Blending colors in palettes
Use Painters Palette Icon #6
Follow instructions.

* Blending Colors in pictures
Set the Size Number
Use the Blender Icon or the
Light Dark Icon or
Magic Wand Icon  or the Cut and
Paste Light Dark Icon

* Why screen goes black
Improper palette record.
Click both buttons above top of
screen if this happens
see understanding color.

* Why is background black
Many of the tools can omit color
#0 in their processes. eg To Paste
an image onto scenery.

* Why is Color #0  special
It is the first color number.
when black, it has no value.
0 red 0 green 0 blue. see above.

* Why does the picture color scramble
A picture is only relevant to
it's palette record.
see understanding color.

* Reducing picture's colors
Choose Reduce Color Icon
Follow instructions

* Increasing pictures colors
Set size number
Use the Blend Icon

* Swapping Colors
Choose Eraser Icon  or Swap Color
Icon

* Left color  ( fill color )
Button 1 sets the Left Color used
extensively by the tools.

* Right Color ( draw color)
Button 2 sets the Right Color.

* Lighten a color
If greyscaled:
Use the Light Dark Icon  or
Shade Poly Icon

* Darken a color
Same as above

* Chiaroscuro ( light and shadow)
da Vinci first developed the use
of light and shadow in his painting
style. As color gets brighter it
appears closer. Farther away things
get darker. Shadows are actually
shades of purple in bright light.

* Painting with light
Use the Light Dark Icon with
any scaled or sorted palette.

* Adding shadows
Scaled or sorted palette:
Choose the Shade Poly Icon.
Set the L color small color #
Button 2 then repeat Button 1 until
desired darkness.
Normal palette:
Choose color, or blend palette color
with purple, pick tool and paint
area.

* Removing color
Use eraser Icon or Swap Color
Icon or Reduce Color Icon

* What is Bluescreen
Replacing a picture color with the
current clipped image. Only the
one color is replaced.

* Changing clip art colors
Set the Right color and left color
prior to pressing Clip Art Icon
or press RC or LC after.
(2 color only)

* Changing text colors
Choose the Text Colors Icon
or Swap Color to change captured
text.

* Changing Font colors
Select Right Color and Left Color
prior to selecting Text Icon
or create a font using Font Icon
then choose darker for darker
shadow. The Text Color Icon
brightens and darkens the area
inside the rectangular cursor if
the palette is scaled, and changes
colors completely if not scaled.

* Icon colors
Color numbers 197 to 255 and
0 to 8 are primarily the
Icon Colors.

* Window colors
Clicking on the Color Button in a
graphic window cycles through
several palettes to the maximum
menu palette + 6.
Run CONFIGIT.EXE to increase the
maximum and add palettes.

 Loading / Saving Files
~~~~~~~~~~~~~~~~~~~~~~~
* What is a PCX
A PCX is a common picture file format.
It carries palette information and a bitmap.
Use this format for exporting a
picture to another program.


* What is a VCX
Similar to a PCX, this program uses
VCX as it's own picture file format.
Not compatible with other programs
to date.

* What is an ANI
This program uses the extension ANI
for all ACT1 animation files.
Not Compatible with any other
program to date.

* What is a Bitmap
A bitmap is a record of pixel color
values as they appear in a picture.
May be compressed and carry palette
information.

* What is a raw bitmap
An uncompressed bitmap without
palette information.

* What is a file header
At the beginning of a binary file
is a reference to how the binary
information is to be interpreted.

* What is compression
Generally, if two or more
consecutive bytes are the same, a
marker is used in their place to
reduce the size of a file.

* Viewing file details
Click on the Top Right corner light
button in any window.
Choose cancel.

* Deleting files
Click on the Top Right corner light
button in any window.
Choose Delete then OK

* Protecting files
Click on the Top Right corner light
button in any window.
Choose Protect then OK
* Renaming files
Choose the Save Button or use the
Dos Shell to do it manually.

* Temporary files
This program uses many temporary
files. The word TEMP is in the
filename. See Screening Room

* Finding files
Click on Sherlock Icon  enter
a pathmask.

* What is a pathmask
A pathmask is the known part of
an unknown file name.
eg: *.PCX will find all PCX files
see your DOS Manual

* Importing Files
This program can Import PCX files
from other programs.

* Exporting Files
Save as a PCX with the Export PCX
option in the Save Button

* Reading a Text File
Load a text file from disk.
Use the Find Button in a text
window to convert the document
if it contains hidden codes.
TXTCNVRT.DOC is created.

* Loading fonts
Choose pathmask *.PAL
Load file, palette will change if
it is different from the current.

* Saving fonts
Use the Font Icon.
Create font.
Choose OK
Press Y or click on YES to save font.

* Viewing a Picture file
Load a PCX or VCX or ANI from
disk.

* Saving a Picture
Choose the Save Button.
Select VCX Picture.
or
Select Export PCX
* Saving a Palette
Choose Save Button to save to disk
or Picture Color Icon

* Saving an Animation File
Choose the Save Button then
select ACT1 animation.

* Saving the Work Space
Choose the Save Button then
select Workspace CFG .

* Creating a Presentation File
Choose the Picture Animation
Text Icon and follow
instructions. It Combines a
full screen picture with an
ACT1 animation and a text window.
or
Use the Presentation Button
in the Screening Room

* Creating a File List
Use the File List Icon  then
in the Screening Room repeat marking
files and clicking on the Scale
button to automatically append
file names to SCRIPT.TXT.
When done press File List Icon again
to View SCRIPT.TXT .

* Combining Files
Create a list of file Pathnames
with an ACII text editor or use
the File List Button.
Then answer Yes to process or
use Disks Icon  to combine
then name file.
or
Use the DOS Shell then the DOS
copy command.
See your DOS manual for information
on the copy command.

* Creating a Knowledge Base
An Anipaint Knowledge Base is unique
because no formatting is required.
Any file that contains text can
be added to the knowledge base.
Use the Combine Files Icon and
follow instructions.
Similar to File List.

* Adding to a knowledge Base
Combine files one of which
will be your existing
knowledgebase.
Use Combine Files Icon
Follow instructions.

* Adding to Clip Art Library
An Anipaint clip art file is a
VCX that is approx 576 x ?
There are approx. 5 images
approx 100x80 per row.
You may make them any length.
100 rows of 5 is ok but operation
is slowed.
Run CONFIGIT.EXE to increase the
Maximum Clip Art number. Then
Rename your VCX to STAMP?.VCX where
? is the new maximum number.

* Converting file formats
PCX files are automatically converted
to VCX when they are loaded. The
original is unchanged.
VCX can be converted to a 256
color PCX ver 5, uncompressed
using the Export PCX option
Convert text in a text window
with the Find Button.

* Running CONFIGIT.EXE
In the Anipaint Directory type
CONFIGIT at DOS.

Using a Scanner
~~~~~~~~~~~~~~~~~~
*  Best way to use scanner
The best way to use a scanner
with this program is to exit
the program. Use the Dos command-
line scanner software that came
with the scanner. Or Windows, if
available. Save the file as a PCX.
Reload Anipaint, load the new PCX.
This will provide the greatest
amount of available memory to the
scanner and memory will not be used
by the program.
More memory = larger picture
= better resolution.

* How to Import Scanned Images
Scan as a PCX. Load the PCX into
Anipaint (use a 256 color mode
when loading).

* Improving Scanned Images
If the image is a 2 color black and
white scanned image, load into
Anipaint, then use the Blender
Icon  to increase color depth.

* Converting to clip art
Select New Clip Art Icon
Width: 576  (suggested)
Height: 719 (suggested)
Paste clipped images onto
picture. ALT-S save screen

5)Drawing Pictures
~~~~~~~~~~~~~~~~~~~
Easiest methods
The easiest is to first trace
an image with the Vector Icon.
Then capture the trace with #35
the Camera Icon, or start with
Clip Art and go from there
to the Blender  and the Light
Dark Icon. Remember to set
the Size number first.

* Recommended methods

Each user will in time, and with
practice develop their own favourite
tools and techniques.
I generally start a picture with
lines then develop the image
with light and shadow.
I prefer to use a scaled palette.
(The color # gets higher as the
shades of one color get brighter)
Shading and light provide depth.
Given a total choice of 256 colors
on screen at one time, the best
depth is achieved with a scaled
palette.
It depends entirely on what style
of image you hope to achieve. If
you were animating a cartoon you
would use a wide variety of bright
colors. If you are looking for
realism, the easiest way is to
use a scaled palette. Any of the
tools that shade or lighten work
best with a scaled or sorted
palette.
Therefore I recommend you start
with a scaled or partially
scaled palette.
The best tool for drawing lines
is the sketch tool.
Set the size number to 1. Then
draw the image, alternating the
right and left mouse buttons.
One to move, the other to draw
depending on how the mouse is
set.
Don't try to be perfect. Change the
color to the background color to
remove the unwanted lines after.
Practice, Practice, Practice.

Painting Pictures
~~~~~~~~~~~~~~~~~~~~
* Easiest Methods
The easiest is to start with clip
art and use the Eraser or Paint
Brush or Poly Line Fill Icon
to fill in the color.

* Recommended methods

I recommend using the Poly Fill
Icon . Set the left fill color,
the Pattern Icon and the right
draw color, then draw and fill the
area.In confined spaces use the
Eraser Icon  to replace the
color. Right Color replaces Left.

Cutting and Pasting
~~~~~~~~~~~~~~~~~~~
* Combining Pictures

Read Understanding Color First.
If you Understand that...
1)Each photograph you load wants
to use all the available colors.
(256).
2) Each set of 256 colors (palette)
is different.
3) To combine 2 pictures they must
share the available colors.
Then you begin to see the need to
greyscale photographic images.

In this way they can share a
palette and maintain their
color balance.

If the images you wish to combine
were created with the same palette
there is no problem.

Therefore sort and reduce
the color .
If you load a 256 color PCX in
16 color mode, it will be converted
to 16 colors.(greyscale)

* Cut Polygon
There are many tools to cut and
paste.  The best are available
in the graphic windows
when you load a VCX. Choose the
Edit button. The same can be
accessed in the CUTTING ROOM.

* Cut Rectangle
If you want to cut a square area
use any of the Cut Rectangle Icons
or choose Capture in a Text Window
or in the Screening Room.
They also have a coordinate ruler.

X Y  coordinates
The standard is that
X is the horizontal Left edge.
Y is the vertical Top edge.
X2 is the horizontal Right edge.
y2 the Bottom edge.
XY Left Top Corner
X2 Y2 Right Bottom corner
XY X2Y2 The hypotenuse or angular
bisection from Left top corner to
Right Bottom Corner.
Z would be the depth.
This program deals only in two
dimensions at this time. Depth is
achieved with light rather than
perspective, although you may use
perspective by calculating it
yourself.

* Clip Count Number
The left number in the left color
square (left edge of the color bar)
is the clip count number. Unlike
most programs that only allow you
to work with one cut image at a
time, this program lets you use
as many clips as you have disk
space. Each time you cut an image
the number is incremented by one.
Pasting does not change the number.
You can manually change the Clip
Count at any time by clicking the
mouse on the Clip Count Number.
If you lower the number, Check to
be sure you don't write over a
needed clip the next time you cut
an area. Save the clip with the
Save Button if you want to be
sure this won't happen.

* Finding a clip
Use Icons #48 and #50 to view the
previous and next clips.
Use Icon #75 to find them on C: in
the current directory or use
searchmode with the path set at
CLP*.VCX.

* Saving a clipped Image
Use the Save Button then choose VCX
or use the Dos Shell and rename or
copy command. Or Export as a PCX.

* Painting with clips (Bluescreening)
In television and the movies they
use a process called Bluescreening
to superimpose an image on a screen
background. The news and weather
often use this. The background is
a blue screen and using trick
photography anything blue is
replaced by another image.
The same principal applies to Icon
#55 except any color, not just blue
can be replaced by the current
clipped image.
If you clip an image full window
with the Camera Icon #35 you can
replace any background color with
the image. Press Bluescreen then
click the mouse in the top left
corner of the window.If necessary
put a dab of the color there first.
If the clipped image is smaller
than the window it will be
repeated as many times as it takes
to fill the screen.

Paste no black #0
A great advantage to pasting images
onto backgrounds is the ability
to paste just the image, not the
black background that surrounds the
clip. Depending on the palette you
are using black may not be color #0
However by default, it is.
It is the color number 0 that
determines whether or not the color
is pasted, not the actual color
itself. The palette you are using
may have white as color #0. In this
case no white would be pasted.
Color # 0 is marked on the color
bar when it is to the left of
centre.

Animating Pictures
~~~~~~~~~~~~~~~~~~~~
Once you have an image, the best
part and most fun, is to bring it
to life with animation.
If you have a slow machine ( less
than 33 Mhz) see Other below.

* Fastest Methods
Five minute animation:
1) Set size number. ( 1 2 or 3)
2) Click on Clip Art.
3) Select image and paste on the
right side of window.
4) Select Cutting room Icon #46
5)Click on the Icon with the arrows
pointing toward the I to load the
image into the animation window.
6) Click on the Delay Clock  (100)
7) Click on the action board to
save first frame.
8) Select the Size number ( 100)
9) Select one of the Pixel Mover
Icons #11 to #18 and apply to an
area of the image that you want
to move.
10) Load the image into the
animation window again with the
arrows towards I Icon.
11) Save frame 2 with the action
board again.
12) Click on the movie projector.

The image moves back and forth.
Repeat steps 10 ... 13.

*  Other Methods
If you do not have a fast machine,
you can animate full screen in
320 X 200 mode. These routines
access video memory directly.
They only work if the image is
exactly 320 x 200.

If you have a series of VCX clips
320x200
1) Set the Clip Count number
to the first frame clip number.
2) Set the Size number to the last
3) Select the Movie Projector Icon
4) The video mode is changed to
320 X 200 and the images are
thrown onto the screen.
Click mouse button 1 to slow down
mouse button 2 to speed up.
Set the Delay Clock Icon #52 first
if you want.
Both Buttons or any key to stop the
show.

Using Scenery

The Scenery Icon #45 captures and
blows up an area the size of the
large work window and delivers you
to the Cutting Room.

1)Make a scenery picture as large
as you can. Highest capable
resolution full screen if you want.
2)Select Scenery Icon.
3)Capture a small area of it.
In reality the whole image
is captured but only 100 x 80
shows at one time.
4)In the Cutting Room you may now
use the Zoom and Scroll buttons
to move the scenery in the
Animation window. This will give
the effect of movement, panning
etc in your animation.
5)Create or clip an animated figure.
6) Click on the area just below
the Arrows Toward I Icon. This
activates color omission.
The Left color and right color are
now omitted when the image is
reduced and loaded into the
animation window.
Make the Left and Right color the
same color as the background.
7)Paste the image onto the scene
using the Arrows Toward I Icon.
8) Set the Delay Clock.
9) Save frame with the Action Board
Repeat moving the scenery with the
scroll buttons and pasting your
figure with the Arrows Toward I
Icon. Arrows Away from I blows up
the image into the large work area.

Zooming In and Out
~~~~~~~~~~~~~~~~~~~~~

Experiment to see how it works.
Click Button 1 or 2 on Zoom in
any graphic window.
Click on zoom in the Cutting Room
to zoom the scenery that you
captured with the Scenery Icon.
Scenery does not zoom out past 1.
Act 1 animation does not zoom in
past 1. It is small enough as it
is.

Improving Clarity
Once you Zoom out past the power
of 3 the image is no longer
solid. This is to maintain a
reasonable speed when the image
is painted onto the screen.
Remember this program can handle
pictures 4000 dots wide by an
incredible distance long.
I have never tested the maximum
length. Hypothetically you would
run out of disk space with only
one image on the disk. An image
4,000 x 12,000 at the power of
only 10 becomes a staggering
40,000 x 120,000 or about 67 feet
wide x 150 feet long. The image
would require 4,800,000,000 bytes
of free space uncompressed.
It is for this reason that images
are saved at their original size
and not at their current zoom
factor. You may save at any time
but at the power of 10, 1 in 10
pixels are saved. This makes
editing very forgiving. I recommend
using images the size of the window
you are using.
Past the power of 3, if you use
the Blend or Pixel Movers the black
between the pixels will distort the
image. To correct this, use the
window scroll buttons to shift
the pixels without clearing the
screen between moves. Using this
technique you will fill in the
space between pixels.
Or activate the Omit Color Pixel
Toggle Icon #19 and set Left and
Right colors to black # 0. Light
and Dark does not effect color # 0
or color #255. However, the Blender
and Scatter Icons affect all color
numbers.

If you zoom in however, and put a
square block of color on an image,
it becomes a line pattern when
zoomed out.
Practice and Experimentation are
the key.

To move around a large picture
use the horizontal and vertical
scroll bars. They are factored
relative to the current zoom.
So even if the image was 60 feet
wide you would move 1/20 at each
location on the bar.
A marker is temporarily left on the
bar as a place holder.

Special Effects
~~~~~~~~~~~~~~~~~~
Ghosting Images
One of the benefits of zooming out
and not filling in the area between
pixels, is that this allows you to
use that space for another image.
You may, when you become adept at
animation, simultaneously animate
several files on screen at the same
location at the same time. However
more than 2 becomes confusing to the
eye. I have not yet fully explored
all the possibilities and
combinations but the capability is
there for you to explore.


Gradient Effects

By gradually increasing or
decreasing the brightness on
a horizontal or vertical plane
depth is enhanced. Also it is always
darker in the corner where the
light is located getting brighter
as you move away. Shadows get
lighter on their outer edges.
Only by experimenting with light
and shadow will you develop a
style that you can call your own.
The tools are there.
The proper way is what works for
you. Experiment etc...
see below

Blending Edges
Again following the same principals
as above. Soften an edge with the
Blender Icon #72. It only works
on a scaled or sorted palette.
With a mixed palette you get
rainbows.
By using the Blender in
combination with the Light Dark
Icon #73 and the Scatter Icon #71
and the Shade Poly Icon you have
the capabilities to bring life
into your drawings.
The Pencil Icon #29 and The Sketch
Icon #30 also are gradient when
the size number is greater than 1
and the palette is sorted or
scaled. The Blob Draw Icon #25 is
gradient and moveable. Draw your
blob, then click button 1 and it
is gradiently filled toward the
centre. Move the mouse at the same
time and the blob moves.
Two of the Filled Circle Icons
are also gradient. Icon #58 and
Icon #60. ( They are actually
polygons the number of sides being
determined by the size number
setting).eg: Size number 8 =octagon
At 30 they appear round. Press the space
bar to paste the geodesic design.

Touching up a photo

If the photo is greyscaled it
is easy to touch up photos with
the Light Dark Icon #73 in
combination with the Blender #72
and the Scatter Icon #71. Use the
Scatter Icon on shades that are
closely matched or it will throw
dark colors all over. Remember
with Autosave On you have undo
and redo capability when working
with a VCX image. Areas virtually
disappear when you use the Shade
Poly Icon. Incidentally
this is the best tool for
creating shadow with a scaled
palette.

Magic Wand
Removing or touching up an area
with a mixed palette such as in
a full color photo has been done
in the past with cut and paste
tools. Now you can use this tool,
if careful to cause areas to
disappear.
Set the size number (30)
Press the Magic Icon #74
Move Mouse see cursor
Click button 2 and paint with
a sampled area opposite the spray.
Click button 1 to change direction
of spray. An arrow is provided to
show where the spray will go.
Works like magic. Better at zoom
factor 2 .

Fonts
~~~~~
Creating new fonts

Virtually thousands of Font
combinations are possible.
Shading, Size, Stretching and depth
in endless possibilities.
Choose the Font Designer Icon #85
Push buttons, you will soon figure
it out with the exception of the
stretch and shadow scroll. In the
centre of the four way scroll
button is the Shadow Stretch
toggle.
Choose OK when done. You will be
prompted to save to disk or not.
Either way the font becomes the
current font for use by the
TEXT Icon #86.
I have provided several examples.
Fonts must have the extension .FNT
The text windows are presently
not hooked into these fonts. The
text window fonts are the Copyright
property of Borland International
and have the extension .CHR
Text windows are area formatted to
allow  Cyberfind to operate.
It is a delicate operation
requiring precision.
You may change the font and it's
size in a text window with the
Font and Size buttons.
Cyberfind returns to the machine
standard 8x8 font in normal size
because the characters are the
most consistent in size.

 Loading fonts from disk

Choose Font Files Icon #87
To load a font from disk just
click on the name in the Screening
Room. Nothing visible happens
but the font is made the current
font for use with the TEXT ICON
#86.

Compatibility
The fonts you create are in no way
compatible or useable in any other
program unless they are in a
picture and saved as a PCX.
Borland fonts extension CHR are
compatible with Borland Products.

Changing Color

Set the Left and Right colors to
change the font colors that you
make or that have the extension
FNT.

 Text Color in Documents
To change the Text window colors
choose the Text File Color Icon
#97.

You may change any color including
text in a picture with the Swap
Color Icon #9 or the Eraser Icon
#5.

Adding Text
~~~~~~~~~~~
Easiest Methods
Choose the Font Files Icon #87
to select a font.
 To include text in a picture
set the left and right colors then
use the TEXT Icon to type text.
Then cut and paste onto the picture.
Or Capture text in a text window and
paste onto your picture.

Fastest Methods
Set the font style and size in a
text window. Capture the text.
Load your picture. Paste the text.

Recommended methods

Practice creating your own fonts
and experimenting with the Right
and Left Colors. Save every font
you make that you like, naming them
as descriptively as possible.
Font files take up very little
disk space. You will soon have
a very extensive font library.
To date, when you print from
a text window the font is not used.
You must manually set the font
on your printer. Paste text into a
VCX picture then Export as a PCX
compatible and use your favourite
printing program that supports
PCX files.


Capturing Text
In a text window you can cut a
rectangular area with the Capture
button. You may also make the
page current then exit the window
and use any Capture or Cut Poly
tool in the Studio.

Pasting Text
Treat the captured text like any
other clip board VCX. The Clip
Count Number is used the same
way as any other clip in this
program.



AniPaint (c)1994 by Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
************************ Problems and Solutions ***********************

Mouse Cursor Problems

This program requires a mouse. It also creates it's own cursors.
It hides the usual arrow. If you see the arrow during use of
the program, your pointing device is not compatible with AniPaint.

I have used a standard interupt 33 to hide the mouse cursor
but it may not have any effect on your pointing device.
Perhaps in a later version I will support your device but
for now I am unable to accomodate you.
The cursor arrow will overwrite the menus.

Program Problems
If you are having serious problems with the program I would appreciate
hearing from you. Write me, or you can E-Mail me at EXEC-PC. Just leave
a message for me and I will try to respond as quickly as possible.  I
can't fix a problem that I can't identify so please make note of the
steps that you took prior to the problem and be sure to include your
machine type and all other information that could be pertinent.
If you have downloaded it from a BBS and you received error messages
during download or if anything unusual happens during decompressing
the program, you may have a corrupted copy. If it is a major defect,
or ommission, chances are that someone has already brought it to my
attention and I have corrected the problem already. Look for a newer
version first and be sure you have read the documentation.

File Problems

90 percent of all problems associated with computer programs
occur with FILE IO (file in out). That is, opening & closing,
writing to files, etc. Communication between the program and the
hard disk. The reason for this is that many times situations
occur that are beyond the control of the program.
The user has as much control over the hard disk as most programs.
They may accidentally delete needed files or put things in the
wrong place, or configure their system in a way that makes
program operation difficult or impossible.
Read all documentation accompanying this program and you will
have a far better understanding of how the program works and what
may be wrong. Make sure your system is set up as it should be and
that you have a complete copy of AniPaint and that all included
files are there where they should be. See README.1ST

Free Space

You need free space to write information to a file.
If you are like most people, you cram as much information onto
your hardrive as possible and operated with a minimum of free
space. It seems no matter how big your hard drive is it is never
big enough. Programs not long ago could be put on a single 320 k
floppy. Not any more. Now it seems they are 10 high density disks
or over 10 million bytes. I am limiting my program to allow it to
be transferred in a reasonable period of time by someone with an
older modem . If it wasn't for this fact, I would include far
more clip art and additional programming and utilities. Not to
mention animation files which can grow to enormous size.
Disk compaction helps, but again the information seems to expand
to fit the available space. So to avoid problems, if you are not
using information on your disk, compress it or back it up and
make room. Ongoing maintenance in this area is essential to
today's large programs. If you are using Microsoft Windows
with disk swapping, you will need even more free space. It uses
your disk to create EMS and XMS for use by this and other
programs. Depending on how your _default.pif or programname.pif
is set.

Messing up needed files

If you don't know what a file is, don't mess with it.
Operation of the program can be Easily totally disabled if you
remove or alter a file that the program needs to operate. If not
totally, disabled then partially disabled to the point that
figuring out what went wrong might be impossible. Keep a neat
house. Try not to put your work files in with the program files.
Use sub directories. The small inconvenience of switching
directories is worth the effort.

Stick to convention

If a file is text, name it with some sort of text extension and
stick to the same format. At least be consistent in naming the
file extensions.
This program, like most others, loads and handles files according
to the last three characters. A PCX is not a PCX unless the
extension is PCX.

Archive attributes

Dos provides several file attributes including READ ONLY. This
program allows you to set files as read only by choosing the
right corner light button, then choosing protect. The benefit is
to provide a safety device to ensure the file will not be
overwritten, or accidentally erased, and to protect it in the
program from prying eyes. However, if you protect a file that the
program needs to write over such as a temporary file, all
operations that use that file will be disabled until you
unprotect it. At DOS attrib -r removes the protection.
See your DOS manual on the attrib command for more information.

Recovering deleted files

If you accidentally delete a program file, you must go
immediately to DOS and use the undelete command to recover it.
You will have to compare the list of needed files (README.1st)
with the files that exist, to determine what files are missing
and what the first letter in the name is.
If you wait, the area on the disk will be used perhaps the next
time the program writes to disk, in which case you will have to
reload the entire program from your back up set. ( which I am
sure everyone has) If you don't, you are out of luck plain and
simple. It is time to call up a friend and get their copy. Keep
that registration number in a safe place, you never know when you
might need it. If the wrong file or files get altered, you will
have to enter it again.

Backing up your work

 Anything mechanical sooner or later breaks down.
It seems that with hard drives the bearings wear out.
Where there is any friction there is wear. As long as your
computer is on, the disk is spinning, it is only a matter of
time. If you have a 210 meg hard drive you probably don't still
have just one 320 k floppy drive. Can you imagine backing up 210
meg with 320 k floppies? I highly recommend a tape backup if you
are serious about graphics. I use one. It is not lightning fast
but it is very easy to use and extremely convenient. I can back
up my entire drive while I sleep or make small 20 meg back up
sets in 3 or 4 minutes.
Not only does it safeguard against disk failure but it protects
me from myself as well. Accidental erasure, or if I get off on a
wild tangent and decide later to scrap what I have done, I can go
back to a point that I am happy with and not have to start all
over. Back up your work, it is a chore but it is worth it. See
your DOS manual. MS-DOS 6 has a new backup utility option.


This program only saves files in a format that it creates,
with the exception of PCX. If it does not recognize the format
it loads it as text. For all I know there may be other VCX
files out there. There most certainly are FNT, PAL and ICO
files out there. THESE FILES ARE NOT COMPATIBLE WITH THIS
PROGRAM UNLESS CREATED BY ANIPAINT. If you attempt to load
a file other than PCX that was not created with this program,
unpredictable results may occur.
Be sure you have read all the documentation

Compression

PCX files as well as most older graphic file types use
compression algorithms in their files. I do not. There are so
many good compression utilities and disk compaction programs that
it has become redundant. Speed is the key. An uncompressed file
can be loaded faster because there are less steps involved in
putting it onto the screen. If you have a fast computer with an
excellerator card and tons of on board memory, you may not notice
the difference. But if you don't even have SVGA, or
are still using a 286, then every bit of speed counts.
You may still find this program slow at any rate. If you do, then
try to confine your graphic work to 320 x 200 mode.
See speeding up the program at the end of SCREENRM.DOC.

There are many fine compression utilities available including
PKZIP that if you are familiar with communications you will no doubt
already have. If not ask someone for a copy. One final note on
compression, when you export a PCX from this program it is not
compressed either. Compression schemes often change with new versions
and I felt that I could extend the compatibility for years
to come if I did not compress these files.
In my own tests I have achieved a 10 % increase in compaction
by using PKZIP on VCX as opposed to PCX. The run length encoding
of PCX files is inferior to the compression of PKZIP.

The program you load the PCX with, may not know the file is uncompressed.
If you want to compress it after you load it into another
program, just save the file with the other program.
If you are working with a minimum of space, create Batch files
that zip and unzip your files as you see fit. You can escape to
the DOS shell in either the Paint Studio (F6), or use the upper right
hand corner light button in the screening room. See your DOS manual
on Batch Files and your compression documentation that accompanied the
compression utility you are using.
The two Icons RUN1 and RUN2.BAT can be user defined to automatically
do your periodic maintenance and compression.

Important note:
If you have limited conventional memory, you will not even be
able to use the DOS Shell, let alone any compression utility.
Optimize your System first. You may check your available
conventional memory by clicking on the little black box beside
FILES/DIRECTORY in the Screening Room.

To change drives, enter the command C: or D: or A: or B: on the
pathline above it.
If it doesn't change, press Cancel, then Clear Desk.

If things are looking terribly wrong all of a sudden or acting
very strange, you may have corrupted configuration files.
Delete DRAWCFG.KEY and FILECFG.KEY and they will be replaced
by new files when you next load the program.

Test the mouse delay in CONFIGIT, then set the mouse delay using
the Mouse Set Icon. The Mouse Set Icon takes precedence over
Configit. If you disable the program with the Mouse Set Icon
you will have to delete FILECFG.KEY in the C:\ANIPAINT
directory.


AniPaint (c) 1994 Rick Sobie
PKZIP is the property of PKWARE.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
<<<<<<<<<<<<<<<<********* Graphic Drivers ***********>>>>>>>>>>>>>>>>>>>

In CONFIGIT, Choose a driver in the Graphics Drivers Menu then
go to the Program Options Menu and Select that Driver as your
default driver.
Once you have done this, choose Save in the Program Options Menu.
This information will be written into your user configuration
file and, when you load AniPaint, that driver will be used. Once
inside AniPaint you may switch drivers and modes if your system is
capable of other drivers or modes.

This program requires a minimum VGA adapter. If you have an EGA
only, don't attempt to load a VGA driver, all the wishing and
hoping in the world won't make it work. With the SVGA drivers, No
checks are made to determine if you have a minimum VGA. So do not
use them if you do not have at minimum, VGA capabilities. If you
have a VGA or SVGA, you can use the EGA resolution as well.

If you are experiencing problems switching drivers in the
program, (especially the 16 color drivers), then set the driver
in CONFIGIT.EXE, and don't change drivers in the program.
Choose the Disable Mode Switching Option in CONFIGIT.

This program was designed for 256 color use. It is possible to
use it in 16 color mode, however it is slower. I mean SLOWER! Not
just a little slower, a lot slower. If you have a fast
machine, you get spoiled easy, and when you have to wait a
little, it can be very annoying. If you still have a slow
machine you may be used to waiting.
The smaller the screen, the less information has to be processed.
Try to confine yourself to a smaller screen unless you don't mind
waiting a bit. See Speeding Up the Program in SCREENRM.DOC.

If you have an SVGA with 1 meg of on board memory, then you are
lucky, proving the card is compatible. With my Paradise
compatible SVGA graphics adapter I can load any of these
drivers, and switch back and forth from 16 color in any mode to
256 color in any mode. You should be able to do the same. I still
find the 16 color drivers too slow to use for any length of time.
( If you are using Microsoft Windows, try running AniPaint from
DOS instead.)
If you have a standard VGA, I suggest you use 256 color 320x200
mode. It is fast . However it get's a little crowded since you
are actually using only a tiny corner of the intended screen
size. Find ways of working around this that work for you. Some
tasks will require you to switch to either EGA 16 mode or VGA 16
mode because the screen just isn't large enough in 320x200. Don't
try to switch to 1200x1024 if you don't have a machine that is
capable of this resolution.

If you attempt to convert 2 color PCX in 16 color mode it
will not work. Use any 256 color mode first, then switch to 16
color if you must, and load the VCX conversion.
VCX files are useable across any driver or mode. Although
the palette record must be correct for the mode you are in. In 16
color mode, only the first 16 color numbers are used. If you are
trying to view a 256 color photographic image in 16 color mode,
it will not look correct. Convert the 256 color PCX using a 16
color resolution.
All 256 color PCX files converted to 256 color VCX, are
better converted in 256 color mode.
The original is always unchanged any time a PCX is loaded.

The IBM8514 is also available but you must enter the correct
parameters on the command line. ANIPAINT /IBM8514 loads
the driver for use with the program. My adapter can not
use the IBM8514. The system locks up and I have to reboot.
The same may happen to you if your graphic card is not
compatible with it. This driver is supplied by Borland
International and remains their property.

You must enter the command ANIPAINT /IBM8514 <0> or <1>
omit the brackets. 0 is 640x480 256 colors and 1 is 1024x768. If
this is the driver you use all the time, create a batch file
called PAINT1.BAT and PAINT2.BAT to save some key strokes
eg:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At DOS type this

C:\ANIPAINT>COPY CON PAINT1.BAT

ANIPAINT /IBM8514 0
^Z

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(don't type C:\ANIPAINT> that's the directory you should be in.)
The ^Z is done by holding the CTRL key and pressing Z  .
Repeat the process for PAINT2.BAT and substitute the 0 for a 1.
Now when you start ANIPAINT you will type PAINT1 or PAINT2
to load the Program.
Once inside you will probably not be able to switch modes.
Disable mode switching in CONFIGIT if you have any problems
changing modes.

See your DOS manual for more information on Batch Files.

Use Autodetection for the ATT400 driver.

If you have some type of special graphics card or high tech
super driver, then one more possibility exits.

Use the switch ANIPAINT /other   You must have a vendor supplied
BGI driver to use this option. A BGI driver is sometimes supplied
with the board. It must have the extension .BGI  and be put into
the ANIPAINT directory. You will be prompted for it's name
eg: FASTDRVR.BGI
Then you will be asked for a valid graph driver number, and graph
mode number to pass to this driver to initialize it into graphics.
See your vendor supplied documentation for information.

Trying to make a program that can be used by a wide range of
machines is difficult to say the least. Only recently have the
manufacturers got their act together and are starting to comply
to a standard that is compatible. VESA is the standard but not
all adapters are truly VESA compatible.
The SVGA256 and VESA16 drivers are VESA compatible, so if you
have a compatible card there should be no problem.

If none of these drivers work for you I am sorry, consider
upgrading your system, and when you do, be sure to ask if the
graphics adapter is VESA compatible. Almost all graphic
programs in the future will support VESA.

AniPaint (c) 1994 by Rick Sobie
CONFIGIT (c) 1994 by Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
<<<<<<<<<<<<<<<<************* ANIMATION *****************>>>>>>>>>>>>>>>

Quick Start Instructions
~~~~~~~~~~~~~~~~~~~~~~~~~
Mouse Button 1 on each Icon to activate tools.
Mouse Button 2 on each Icon for help with tools in the Paint Studio.
Load an existing PCX. Capture an area 320x200 with the EDIT button.
Click on the Paint button. Use the Icons to alter the image.
Capture the area again. Set the left number beside the color bar to 21.
Set the right number beside the color bar to 22. Click on the Projector
Icon. Both buttons to stop the show. There are many more ways to
create animation with this program. Read the rest of this document for
more information.
For transfer to video:
Set your camera up to film the computer screen. Create an image,
capture the frame with your video camera, alter the image, then repeat.
Or create the entire sequence, play back, then film the sequence.
The advantage to using a video camera is that you can create high
resolution pictures on-screen and film each frame creating a high
resolution full screen animated sequence. This program will not animate
high resolution images itself. It requires ultra fast systems and tons
of memory beyond the average system in use today. This imagery is
bitmapped unlike the vector graphics seen often on T.V. made with
supercomputers and graphic animation programs costing thousands of
dollars.

Important! If you have a system slower than 50 mhz ,
read Speeding up the Program at the end of SCREENRM.DOC.
Use ACT2 animation instead of ACT1 animation.

There are many types of animation and many things people
refer to as animation from ANSI text to sprite animation in
video games.
This program uses animation the same way they do on T.V. and in
the Movies. One frame at a time. You create a series of frames,
then you play them back quickly.

ACT2 Animation
~~~~~~~~~~~~~~
ACT2NAME ACT2 animation can be captured in 200x320 or 320x200
anywhere on the screen. If you select 200x320 you will not be able
to use the fast assembler routines (FAST320x200VCX see below).
Use the ACT2 Drive-in Icon, or load an act script, or
use the ACT2 Room to view the sequence. (resonably fast machine req.)
To capture ACT2 that can be displayed anywhere, use ALT-E and
choose Capture ACT2 Animation.

FAST320x200VCX     If you feel the need for speed.
~~~~~~~~~~~~~~
These routines write directly to Video Memory and because of this
the file size must be 64776 bytes.
320x200=64000 bytes + 776 bytes for the file header.
When you save as a FAST320x200VCX ACT2 animation CLIP, it is saved
at 320 pixels wide by 200 pixels long.

Easy Method
***********
1) Load any picture any size into a graphic window.
2) Clip or zoom or manipulate the image with the scroll
bars or buttons until it is approximately 320x200 in the
left top corner of the window.
3) Choose the Edit Menu button on the top row of the window.
4) Select Capture ACT2 animation.
The area 320x200 in the top left corner is saved as CLP#.VCX
where # is the next Clip Count number in sequence.
It will be saved on D:\CLIPS if it is available or on C: in
C:\ANIPAINT\CLIPS if not.
The Clip Count Number will be incremented by twenty if the
current clip count number is less than twenty. This is to
separate your scratch work clips from your animation clips.
All clip boards use the Clip Count number to determine the
name of the file. See Clip Count in STUDIO.DOC for more info.
5) Repeat steps 1 through 4 above.
6) When you have a few ACT2 Clips saved, go to the Paint Studio
and set the Clip Count number (extreme left of color bar) to the
number of the first clip that you made.
7) Set the Size Number (extreme right of the color bar) to the
number of the last Clip that you made.

Again, so I make myself clear, the first frame starts playing at
the currently set Clip Count number and plays frames until it
reaches the Size Number, then it repeats.
In this case, if you have made no clips prior to starting this,
the first frame will be 21 and the last will be 21 + the number
of frames.
Once you have done this Play back the series by selecting the
Projector Icon #51.
If you hear a series of clicks, either the Clip count number or
the Size number are not set correctly and the routine cannot find
one or more frames. If mode switching has been disabled in
CONFIGIT.EXE you will first have to switch to 320x200 mode using
CONFIGIT.
If you have followed the instructions above and you have a system
capable of VGA 320x200 mode in 256 colors (any standard VGA) then
you will see the frames being played. If the frames are all the
same it will appear as if nothing is happening.
Use Mouse Button 1 to slow down the frames or Button 2 to speed
them up. The default delay is 50 milliseconds or as set by the
next Icon the Delay Clock #51.

Set the Size Number, Click on the clock. That sets the delay time
between frames. Once the sequence is playing you may still
use the mouse to speed up or slow down.

To exit the animation sequence, Click both mouse buttons at the
same time.

To vary the delay for more realistic animation, write a script
and use the command TIMEDELAY:
see ANIMATION SCRIPTS below or Presentations in SCREENRM.DOC for
more information.

Standard Method
***************

1) Go to the Paint Studio.
2) Draw or edit a picture until it is 320x200
3) Save the frame with the Action Icon #49
It keeps track of the frame number and is displayed on the Icon.
4) Use any of the tools to alter the image.
5) Click again on the Action Icon, the frame is saved.
Remember only the area 320 pixels x 200 pixels in the
left top corner of the window is saved.
If you are in 320x200 resolution mode, the entire screen is
saved. Continue altering, saving, redrawing etc until you have
the series of clips that you require, then set the Clip Count
number to the first clip frame number and set the Size number to
the number corresponding to the last frame number.
6) Use Icons #48 or #50 to view the previous and next Clip Board
files.
7)Load the clip into a window then choose the Save Button to
 rename it.
To do this, go to the Screening room and change drives to D: if
D: is available then switch directories to CLIPS,
then enter CLP*.VCX on the pathline. If D: is not available then
change directory to CLIPS and enter CLP*.VCX on the
pathline. In the Paint Studio you may choose the ClipBoard
Icon #75. It does the same thing for you using Searchmode.

The directory list will appear in the Directory area.
Then load the clips one at a time and save them one at a time
using the Save Button.

Once they have been renamed you can no longer play them in the
Studio. You have to enter the names into a list or Script and
play them back either in the Screening Room or with PLAYACT1 at
DOS.

When you create a Presentation using the last Icon in the
Studio or the Presentation Button in the Screening Room
it does not prompt you for ACT2 animation. It only
prompts you for ACT1 animation because ACT1 animation
is one file. If it prompted for ACT2 animation you
would have to type in every file name in your sequence
which would no doubt lead to too many errors.
Instead I have created a Room to make this task easier.

The ACT2 Room         Important!! SVGA 256 color mode required.
~~~~~~~~~~~~~
Remember! In the ACT2 Room, Mouse Button 2 is the enter or
activity button. Click on Done to exit the ACT2 Room.

When you enter the ACT2 Room, it automatically  loads
three clips into small windows, starting with the
current Clip Count number - 1.
If the Clip Count Number is 22, it will display
Clip #'s 21,22, and 23 in a small window. Since the
Current Clip Count (in this example) is 22, Clip # 22
will be put in a 320x200 window in the Left Top corner.
If the Clip number is yet unused, it will say
"Unused Frame". If the Clip is Larger or Smaller than
320x200, then an X will appear in its place, and the
message "Not an ACT2 Clip" will appear below it.
All ACT2 animation must be 320x200 because of the way
these routines are optimized for speed.

Use the Icons in the room to create an ACT script that
can be played at any time. Keep in mind that if you are
using a Ramdrive (recommended) then in order to save these
clips, you must copy them to C: or they will evaporate when
you shut off your computer.

Suppose you wanted to save all the clips in D:\CLIPS.
Use the DOS Shell or Exit to DOS and at DOS you first
create a directory for them.
Eg:  C:\ANIPAINT> MD C:\MYSHOW

This would create a subdirectory of C: called MYSHOW.
Then you would issue the command:
Eg: C:\ANIPAINT> Copy D:\CLIPS\*.VCX C:\MYSHOW
All the Clips in D:\CLIPS would be copied to your new
subdirectory. Be sure you have enough space on C:.
If you are not using a Ramdrive , then your Clips
will be in C:\ANIPAINT\CLIPS. If you wish to save
the sequence follow the same procedure as above only
substitute C:\ANIPAINt\CLIPS\*.VCX. If you do not
copy the files to somewhere else, they could be
overwritten the next time you save an ACT2 Frame.

Important!! ACT Scripts can be played by ANIPAINT or
PLAYACT1. Either way they need to now where the files
are, so if you copy *.VCX to another Directory, you will
have to Edit the Script. Change all the listed Path Names
to the New Directory. Use any text editor such as
DOS EDIT or a word processor to edit the Script.
It must be ASCII text (no hidden codes).

Also, the palette that the sequence uses should also be
copied to your new directory. If you used the ACT2 Room,
the palette is saved as ACT.PAL on entry, and if you
change the palette (using the Picture Color Icon) then
ACT2.PAL is created. Both are put in C:\ANIPAINT.
Remember! To play an ACT Script all the necessary
files listed in the Script, must be available.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
How to Use the ACT2 Room  Important!! SVGA 256 color mode required.
~~~~~~~~~~~~~~~~~~~~~~~~
Requires a fast machine. see FAST320x200VCX below for slower
machines. All ACT2 frames start above # 20.

The ACT2 Room writes the temporary script called SHOWIT.ACT.
Treat it like any other ACT script.

Special Functions
^^^^^^^^^^^^^^^^^
When you click on a small frame, the contents are transferred
into the large window.
When you click on the large window it is added to the script.
Along with the currently set Time Delay.
If you click on the word "Delete" in the script window, the
line opposite the word is deleted from the script.
Use the scroll buttons to scroll lines in the script.

The 1- Clip Board Icon
^^^^^^^^^^^^^^^^^^^^^^
Use this Icon to reduce the Current Clip Count by one
and display the contents of the clip in the Top Left
Corner.

The 1+ Clip Board Icon
^^^^^^^^^^^^^^^^^^^^^^
Use this Icon to increase the Current Clip Count by one
and display the contents of the clip in the Top Left
Corner.

The Roll Em Icon
^^^^^^^^^^^^^^^^
Three Clips , clip count-1, clip count, and clip count +1
are displayed in small windows, and Clip Count is displayed
in a 320x200 window in the Left Top corner.

The Director Speaks Icon
^^^^^^^^^^^^^^^^^^^^^^^^
Use this Icon to fetch a clip that is not 320x200. The usual
pop up clip menu appears with several self explanatory options.
Since all ACT2 animation must be 320x200, this is the only way
to bring a non ACT2 clip into the ACT2 Room.

The Casting Call Icon
^^^^^^^^^^^^^^^^^^^^^
Use this Icon to load the Clip Art window. If you have created
a number of characters, you may want to add them to a Clip Art
Library, so you will be able to call on them at any time.
See STUDIO.DOC for information on the Clip Art Icons.

The Zoom and Draw Icon
^^^^^^^^^^^^^^^^^^^^^^
Use this Icon to zoom the Current Clip out, and work on it
using the Upper Icon Bar Tools. (provided for convienience)
When you are finished editing the clip, click on the scroll
bar (horizontal or vertical) to reload the clip to it's normal
size. You may use the Edit Button in the active window to save
the frame or save it using the ACT2 Action Board.
You must save the ACT2 frame prior to returning to the ACT2 Room
or the changes made will not be saved. Be sure to adjust the
Clip Count number ( left of color bar) prior to saving the clip.

The ACT2 Drive In Icon
^^^^^^^^^^^^^^^^^^^^^^
This Icon displays the current script. It does not repeat
because the command REPEATEND: is not added to the script
until you exit the ACT2 Room. If you want to view the
script with the sequence repeating, go to the Screening Room
and load the file SHOWIT.ACT.
SHOWIT.ACT is the temporary file created in the ACT2 Room.

The ACT2 Room Action Board
^^^^^^^^^^^^^^^^^^^^^^^^^^
Unlike the other ACT2 action board in the Upper Icon Bar,
this Icon lists the Clip Count Number it will save as.
The other lists the current number but increments the
number prior to saving the clip.
When you click on this Icon the area 320x200 in the Top Left
corner is saved. If the number showing in the Icon is 21,
the name will be D:\CLIPS\CLP21.VCX if D: is available, or
C:\ANIPAINT\CLIPS\CLP21.VCX if not.
If the file name is in use it is automatically overwritten.
Use the scroll buttons beside the Icon to reduce or increase
the Clip Count Number prior to saving the clip.

The Clear Icon
^^^^^^^^^^^^^^
Use this Icon to clear the area 320x200 in the Top Left corner.

The Delay Clock
^^^^^^^^^^^^^^^
Use this Icon to set the delay between frames. Click on it and
the command TIMEDELAY: is added to the script.
Use the scroll buttons beside the Icon to increase or decrease
the delay. Outside of the ACT2 Room, the delay is set by first
setting the SIZE Number to the correct amount, then clicking
on the Delay Clock Icon in the Upper Icon Bar.
If you want to quickly reset the delay to 0 in the ACT2 Room,
just click the mouse on the delay number in the right side of
the message bar. ( where the size number is usually located).

If you have a slow system, you will want to keep this number
at 0.
If you want the script to pause, add several TIMEDELAY:
commands in a row. The maximum for each delay is 6000
milliseconds.(6 seconds). If you want an indefinite delay
add the command READAKEY:. This will delay until a key is
pressed or the mouse is clicked.

The Menu Color Icon
^^^^^^^^^^^^^^^^^^^
Use this Icon to cycle through the menu palettes. The changes
are instant. If you change palettes, remember to save the
palette to the script using the Picture Color Icon.
(see below).

The Save Script Icon
^^^^^^^^^^^^^^^^^^^^
Choose this Icon to rename the current script. The ACT2 Room
automatically writes SHOWIT.ACT. If it exists it will be
overwritten. If you want to save the script, use this Icon
before leaving the ACT2 Room. Otherwise the next time you
enter the ACT2 Room, SHOWIT.ACT is rewritten from scratch.

ACT2 Position in Script
^^^^^^^^^^^^^^^^^^^^^^^
If you choose this Icon, you will be able to choose the
location where the ACT2 animation will be displayed on screen.
click Button 2 to record the position to the script .


The Picture Color Icon
^^^^^^^^^^^^^^^^^^^^^^
Use this Icon to save the current palette as C:\ANIPAINT\ACT2.PAL
and the command SETPALETTENAME:ACT2.PAL is added to the script.
Keep in mind if you want to save the script to show other people,
you must include the file ACT2.PAL or the palette won't change.
If you want more than 1 palette change, you must copy ACT2.PAL
onto another name first. ACT2.PAL is written over every time
this Icon is pressed. ACT.PAL is rewritten every time you enter
the ACT2 Room and ACT2.PAL is rewritten each time you use this Icon.

The ZAP Icon
^^^^^^^^^^^^
Use this Icon to delete the current Clip. The Current clip is the
clip corresponding to the current Clip Count Number.
You will be asked for confirmation prior to deletion.
Answer Y or N when prompted.

The Done Icon
^^^^^^^^^^^^^
You exit the ACT2 Room. The screen is not cleared to allow you
to work on the current clip if you wish to.

The Help Icon
^^^^^^^^^^^^^
The Help Icon Loads this file into a window.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You may also add ACT2 animation to any ACT script file
with an ASCII text editor or word processor that can export
ASCII text.

Just add the command ACT2NAME:framepathname, where framepathname
is the valid path of the file. eg: C:\ANIPAINT\CLIPS\CLP22.VCX

See Presentation Button in SCREENRM.DOC for more
information on ACT script files.

FAST320x200VCX
~~~~~~~~~~~~~~
Very Important!! All FAST320x200VCX animation sequences
are played in 320x200 VGA resolution only. In the Paint Studio,
if the current video mode is not 320x200 VGA it will
be switched to it unless mode switching is disabled.
If you mix ACT1 animation with FAST320x200VCX, separate them
and put the FAST320x200VCX animation in a separate script.
Then run them with a batch file.
You may mix ACT2NAME ACT2 animation because it plays in any
resolution, providing your machine has the capability.
Also you must save the Palette of one of the frames
and enter the command SETPALETTENAME:palettename.PAL
where palettename is the name of a valid Anipaint
palette file, before the list of ACT2 frames or the
palette will probably not be correct. Be sure to
include a copy of your palettename file, if you give
the animation sequence, to someone, for viewing.
Act1 animation sets the palette automatically but the
FAST320x200 does not, as this again would slow things
down.If you have more than one palette change, save the
palette again and enter that name prior to the frame
that uses a different palette.

Use the command TIMEDELAY to set the delay
between frames in the script. The maximum delay is
6000 milliseconds. So if you want it to delay for
an hour between frames you will have to repeat the
command many times in a row, the total adding
up to the desired wait.

To edit the sequence either set the clip count
number manually to the corresponding frame number and
write over it with the next clip or load the file
into a window and click the right corner light
button of the window and choose delete to destroy
the frame. If you don't write over the empty clip
you will hear a click every time that the projector
Icon trys to play the frame. To edit a script
just delete the line containing the name.

Even if you are working in 16 color mode, the files
will be 256 color VCX with palette information
attached to the file. Any time you are in 16 color
mode in this program you are using a 256 color
palette but only viewing 16 of the 256 available
colors.
The benefit to this is you can create the files in
any mode and then play them in 256 color 320x200 VGA
mode when you want to view them. However depending on
the palette the colors may or may not be correct. Check
the palette colors first by loading one of your clips
in 320x200 256 color mode. You can change the palette of
any picture by using the Picture Color Icon #95
in the Paint Studio.

Finally, if you are planning on sharing your animation with the
world, keep in mind that although PLAYACT1 can use
screen resolution to 1024x768, fewer computers are out there that
support SVGA than support VGA at this time. Also there are fewer
50mhz computers than there are slow machines, so use ACT2 for speed.


Draw backs
**********
Act2 animation files are not compressed because of the need for
speed. Compression slows things down too much by adding steps to
the file handling routines.
10 ACT2 animation frames are 647,720 bytes. 100 frames are
6,477,200 bytes so watch your disk space.

They play back faster if they are on D: because D: is a Virtual
Drive On a fast modern system you may not notice any difference
at all on C: or D:. Hard drive Access speed , size of cache etc..
are all determining factors.

If you have made a series of clips that you want to share with
the world, they compress very well with PKZIP. Just uncompress
them before playing the script. I am providing a player free of
charge with this release. It is called PLAYACT1.EXE It plays any
ACT script and may be distributed freely for private use although
I reserve all rights to it. If you load an ACT script file in the
File Screening Room it will play the script then load the script
into a window so that you can view the script. ACT scripts must
have the extension .ACT . If not they will not play in the File
Screening Room.

If you want to combine FAST320x200VCX ACT2 with text in a presentation,
you will have trouble fitting text onto the screen. Use ACT2NAME
instead and display it in a window anywhere on the screen.
You should have a fast machine to use ACT2NAME animation.
Text in 320x200 mode is really crappy. There just isn't enough
room to put text with a nice font onto the screen. You will
either have to use the default system font or Font #2 (the small
font) or create your own small font with the Font Creator Icon in
the Studio. See STUDIO.DOC for more information.
One way around this would be to create a batch file that calls
Playact1 using different resolutions and different ACT script
files. Using higher resolutions for text and perhaps some ACT1
animation and using 320x200 mode for ACT2 animation sequences.
See your DOS manual for information on writing batch files.

See the ACT2 Demo by clicking on Demos in the Screening Room and
selecting ACT2 Demo. Due to the size of these files I could not
include real samples with this package. However they will be
created when you use the demo. The pixel mover Icon is loaded. Use
Button 2 to move some pixels then click Button 1 to end the first
process. Next the first frame will be saved for you and then
another direction of pixel mover will be loaded. Again move some
pixels by pressing Button 2 . Button 1 to end that process. Next
the frame will be saved again for you and the process continues
until 5 frames are done. Then when the fifth frame is saved it is
played back for you. If everything is all right you will see the
changes you made happen in sequence on the screen.
If you have a real slow machine the animation may still not be fast
enough for a realistic effect. If you have a reasonably fast
machine the changes in frames will happen quickly.
At least you will get an idea of the speed. To truly see the speed,
create a character yourself and try it in the Paint Studio.
You must be in a 256 color mode to use this demo.
Clip Count numbers from 100 to 105 will be used on D:\CLIPS if D:
is available or C:\ANIPAINT\CLIPS if not.
If these files already exist because you have previously made a
hundred clips in one session (unlikely) and you need them,
rename these existing clips that you have made prior to running
the demo.

Converting ACT1 to ACT2 animation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have a slow machine this will require patience.
If you have VGA only, go to 640x480 mode, load the
ACT1 series to convert into a window. Ignore the
palette if you are converting 256 color sequences.
The palette can be corrected if need be, back in
256 color mode.
Use the Color Button in the window to change the palette
if you want.
Capture frames by the EDIT Menu button or press
ALT+E on the keyboard.
If the Clip Count number is less than 20, it will
start at 21 and increment automatically. After you
capture the ACT2 frame, Click on FRAME. The
next ACT1 frame will be displayed in the window.
Continue switching frames and saving ACT2.
Switch back to 320x200 VGA mode if you can.
Then go to the Paint Studio and set the Left Clip Count
to 21 and the Right size number to 21+ the number of
frames you made.(Usually the Clipcount number before
you changed it to 21).

Even if you have a slow machine, you may wish to use the Cutting
Room to create an animation sequence, then convert it to ACT2
320x200 to play it back quicker.

To do this, create an ACT1 sequence of frames, then choose the
clip board Icon in the Cutting Room. There is an option in the
pop up menu that will capture the small animation window and save
it as an ACT2 320x200 frame. A background is added to compensate
for the difference in frame size. ACT1 is 100x80.
Each time you save a frame the Clip Count is incremented.
Alternate loading your ACT1 frame into the animation window and
saving the ACT2 frame using the Clip Board Icon.

When you are done, treat the clips like any other ACT2 frame.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ACT1 Animation
~~~~~~~~~~~~~~
If you have a fast machine you will enjoy creating animated
sequences using the Cutting Room.

Advantages
~~~~~~~~~~~~
The advantage to using ACT1 animation is that the frames are
Zoomable and they run in any resolution.
Using the Story Board Icon you can trade frames with ease.
In fact you can create an animated sequence of 100 frames in 15
minutes once you know how to use the cutting room effectively.
ACT1 animated sequences can be incorporated into a Presentation
with a Full Screen background and a text window.
Change palettes at the touch of a button.
Pan Zoom and many special effects including blurred movement can
be used.
You have complete control of the sequence in a window specially
designed for them. Just load the ANI file into a window like any
other file in the Screening Room.
One advantage to their small size is that imperfections don't
show up quite as much. You draw in the window zoomed out and the
frame is shrunk when it is loaded into the animation window.

All the tools you need are conveniently contained in the Cutting
Room.

Image ghosting, fades and multiple sequences at the same time are
possible, not to mention the myriad of possible combinations that
have not yet been explored.

You can superimpose them on a background first created with the
Scenery Icon.

Another advantage is that all ACT1 frames are contained in one
file. ACT2 frames are all separate files.

Disadvantages
~~~~~~~~~~~~~
They are not very big because even a 486 66mhz is not fast
enough to manipulate a large ACT1 animation sequence. They do not
use direct video memory access. They use high level routines.
Switch resolutions to 320 x 200 and they seem larger, or zoom
them out.

They are not very fast for the same reason.

Image quality becomes grainy at higher zooms in order to
retain the speed and maintain their device independence. Use a
solid black background behind a zoomed out ACT1 for best
visibility.
(If you were to create 100 frames full screen at
1200x1024 that would be 120 meg. Not very practical).

Creating ACT1 Animation
~~~~~~~~~~~~~~~~~~~~~~~
Whenever you create ACT1 animation it uses the temporary file
ACT1.ANI on D: if available or C: if not.
When you create the first frame with the Action Board Icon
in the Cutting Room it looks to see if ACT1.ANI exists. If
it does the frame becomes the next frame in the sequence.
If ACT1 does not exist it creates it. If you want to begin
a new sequence  Save ACT1.ANI under another name with the
Save Button (if you want to save a previously made sequence) and
then delete ACT1.ANI by loading it into a window in the Screening
Room and choosing the right corner Light Button.
Then choose Delete. Now when you save the frame, ACT1.ANI
is created from scratch and the frame becomes frame 1.
To change or save the Palette to the file, use any Icon or
Button that changes the palette, to make the palette you
want, the current active palette. Then choose the crayons
in the Cutting Room to write the palette info to the ACT1.ANI
file. Only one palette is allowed per file. To change palettes
in a sequence use an ACT script and create two different sequences,
palette changes between ACT1 sequences.



Easy Method       SVGA 256 colors 640x480 mode
***********

1) Set the size number to 5
2) Choose New Pic Icon and set the height and width to the
default 640x400;
3) Click on the Clip Art Icon
4) Select a clip art image and paste it on the right side
of the current window.
5) Click on the Cutting Room Icon.
6) Click on the Arrows Towards I Icon to load the image into the
animation window.
7) Click on the Action Board Icon and the first frame is saved.
8) Use any of the Pixel Mover Icons to move parts of the clip art
image in the large window.
9) Again choose the Arrows Towards I Icon to load the altered
image into the animation window.
10) Save the frame again with the Action Board Icon.
11) Test the sequence with the Projector Icon.
You will see the image move in the animation window.
If you click on the animation window and then on the projector
you will be put into 320x200 mode for viewing. (Providing the
Mode Switching Option is not set to Disable).
Click both buttons to return to normal mode in the Cutting Room.

The window is not cleared when you choose the Done Button to
allow you the freedom to manipulate the window with the
tools in the Upper Icon Bar. You must exit the Cutting room to
use the Upper Icon Bar. However, Icon Bar tools are available in
the Cutting Room in the three scrolling Icon areas.
* You may Want a larger window to work with or
* You may want to use Autosave or
* You may want to go to the Screening Room to retrieve a file
etc.

If you want to load the current VCX into the Large Work window,
press ALT+L on the keyboard. If a VCX file is current, the
file will be loaded.
ALT+C loads the Clip Art Window. Once you are familiar with the
program, you could create a Clip Art library of characters. Then
when you are making a sequence, you can capture any cast member,
by clicking ALT+C and loading the Clip Art library containing the
members of the cast. (See STUDIO.DOC on Clip Art Libraries.)

When you want to go back into the Cutting Room just click once
again on the Cutting Room Icon.

To Exit the Cutting Room choose the Done Icon.
The cutting room requires a screen size of at least 640x480 to
operate correctly.
If you lose the cursor, Click both buttons.
If you have to exit fast then press ESC.
ALT-X will exit the program or choose the Exit Button.

The Cutting Room is a program all into itself. It has many
small subtle features that take a while to understand and
use correctly. There is a Help Button in the Cutting Room.
Click Button 2 on it to get help on each Icon. Help on the
three scrolling Icon areas is located in the Upper Icon Bar by
clicking Both Buttons on the individual Icon that you
want help with. If in the Cutting Room you will have to
exit the Cutting Room in order to get this help. It is
recommended that you at least become a little familiar
with the Upper Icons before you use them in the Cutting Room.

Using ACT1 in a script you can manipulate them easier.
The script doesn't care how many frames there are. One frame is
still ACT1 as far as it is concerned. So you can combine
numerous sequences into a movie with special effects if
you master both ACT scripts and the Cutting Room. The
Presentation Button in the Screening Room  or Presentation Icon
in the Studio create scripts. Or you can create one with
a word processor providing the file is plain ASCII text.
Play ACT1 animation by loading the ANI file or  ACT script
file into a window or by using the stand alone player
called PLAYACT1.EXE. Type PLAYACT1 /h at DOS in the
directory containing PLAYACT1.EXE for help using PLAYACT1.
It is not included with this shareware release but
can be obtained by registration.

The three uppermost Icons in the cutting room are The
Arrows Away from I Icon, The Clear Icon, and the Arrows
towards I Icon. They each have an option that you can
click either ON or OFF. With the Arrows to and away Icons
the toggles determine whether or not you want to omit
colors when the image is shrunk into the Animation
window or Expanded into the large window. In the Off state,
all colors are transferred including the background.
In the On state the Left and Right Colors are omitted.
Click on the Color Bar to change the Right (Fill Color)
and Left (Draw) colors.

If you have not selected the Paint Brushes Icon then
you may select the draw color by clicking on any color
in the large window.

If you select the Paint brushes icon then Button 1 draws
blocks the size determined by Brush Size Number below the
Brushes Icon and the color determined by the Right Color.
Button 2 draws blocks in the Left Color.
When you use this Icon the blocks are automatically transferred
into the animation window at the same time. (The same way as in
the New Button Icon)
Use a brush size of 1 for shading.
When you select another button or Icon the paint brush is
deactivated.

If you want to transfer the entire image in the large window to
the small animation window then use the Arrows towards I Icon.

The Paint Fill Icon is actually a Color Replacer and not a flood
fill tool. Click Button 2 on the lone paintbrush and it is
activated. Click Button 2 and it is deactivated. When active and
Button 2 is pressed it replaces any color it touches with the
Right Color.

Once you have a few frames you can load the Story Board with the
Story Board Icon. The Story board loads the Large window with the
ACT1 frames. The cursor becomes the magnify cursor.
When the magnify cursor is active, you can click Button 2 on one
of the frames to reload the frame into the animation window. When
you Click Button 1 on a frame the image in the animation window
replaces that frame. Once you select another Button or Icon then
the Story Board is deactivated.

Once you have completed your session choose the Done Icon to exit
the Cutting Room, go to the Screening Room, load ACT1.ANI into a
window, (D:\ACT1.ANI if D: is available) and choose the Save
Button, to save ACT1.ANI under another name.

You may load an OLD ACT1 sequence back into the Cutting Room by
using the Load Icon. Select Load ACT1 and enter the name of the
ANI file you want to edit. It is then copied onto ACT1.ANI
leaving the original unchanged. You may now load the Sorry Board
or add another frame.

See CUTTNGRM.DOC for more help.
AniPaint (c)1994 Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
<<<<<<<<<<<<<<*********** Problem Finder *************>>>>>>>>>>>>>

Is the file protected?
If so enter the DOS command    filename.ext ATTRIB -r    at DOS

Is a file lost?
If so run CONFIGIT.EXE read docs find lost filename then
enter the DOS command   UNDELETE
enter the lost first letter.      DO IT NOW
if it doesn't work reload your backup set.

Is your Disk Full?
Click on the little black box beside FILES/DIRECTORY in
the Screening Room. If so then delete files and make space.

Do you have enough memory?
Does the Dos Shell Work?
if not you need more free memory.
Remove all memory resident utilities in AUTOEXEC.BAT
Optimize your system. See your DOS Manual.

Are you having problems with drivers?
If so run CONFIGIT.EXE check which drivers work.
Avoid the 16 color drivers if they are causing problems.
Try disabling mode switching in CONFIGIT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Read ANIMATE.DOC concerning ACT1 animation
 Read CUTTINGRM.DOC concerning the Cutting Room.
 If ACT1.ANI exists it is added to if it
 does not then it is created. If you are having trouble
 erase ACT1.ANI on D: if D: is available and  C: .
 Go to the cutting room and try again.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Read ANIMATE.DOC

There is a possibility that the memory address is incorrect
for your current machine and configuration. If so then
run the program from DOS with a clean Boot. (Not Windows and
no Memres utilities).
ACT2 animation in 320x200 mode uses the standard VGA address.
If you don't have at least a VGA monitor then forget about it
it uses the standard VGA memory adress. ($A000) (See your monitor
or graphics adapter card documentation .)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are having problems with your Draw Configuration File.

Erase DRAWCFG.KEY and it will be replaced by a new copy.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Paint Studio cannot operate without BIN4.FLE
If this file is missing or corrupt you will have no Icons.
Replace it from backup or use the DOS Undelete command if you
accidentaly erased it.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Read STUDIO.DOC on the Clip Count Number.
All clip boards use the Clip Count number.
Clips are kept on D:\CLIPS if D: is available or
C:\ANIPAINT\CLIPS if not.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Read the first part of this Document.
Read STUDIO.DOC on all Fill tools.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the program cannot communicate with the Printer.
The printer is supposed to be connected to LPT1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The program will abort printing if you touch any key or
it runs out of paper or if the Program receives any
error message from the Printer at all.
Read Printer Q&A and your Printers Manual under Trouble Shooting.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Screening Room cannot Operate without a Directory List.
The only thing I can think of that would prevent this is
a lack of Disk Space or Available Memory. See the beginning
of this Document.

====================================================================
Tool Problems

The most common tool problems are cursor problems.
Run CONFIGIT.EXE and adjust the mouse.

If you cannot find the cursor when you start a process try moving
the mouse up, it may be below the screen, too low for your current
resolution.
If you cannot find the cursor at all then click Both Buttons.
If you are not familiar with the way that all Box Cursors
shrink and Grow at the edges then read STUDIO.DOC

If the Fill tools are not working then again read STUDIO.DOC
they are not like normal fill tools in other programs.

If a tool is not working at all then reload your backup set.


======================================================================






AniPaint (c) 1994 by Rick Sobie
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%















Click on a number then test drive to try it.

This is a Window Demonstration file.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To Exit a Window
~~~~~~~~~~~~~~~~
1) Move cursor over top of Window.
2) Click any Button.


File Name Area                     #1
~~~~~~~~~~~~~~
Located top left of window is the File Name


Beside the Name are the Picture dimensions if the
file has a VCX extension.

To Move a Window:

1) Click Button 1 on Name.
2) Move mouse.
3) Click Both Buttons.

To Resize a Window:

1) Click Button 2 on Name.
2) Move Mouse.
3) Click Both Buttons.






To View File Details, Protect or Delete    #2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click on the Upper Right hand corner
light button.

A Window Pops up With File Details and
Buttons to Protect or Delete the File.

See SCREENRM.DOC for more help on protecting.
or See your Dos Manual


This Window is On ( Light is Green or Blue).

Too See a Window in an Off state (Light is Red),
Click on #2 again.









Scrolling Window Contents to the Left        #3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Click  button 2 on the right bottom scroll button and
text or graphics is scrolled one line to the left.

If the Window is a Graphic Picture then this scroll
button will cause all the pixels to shift left one
If the picture is zoomed out more than 3 it will
not clear the screen first.
Both Buttons inside the window anywhere clears and
redraws the screen.

Use arrow keys or Click button 1 and the picture
is scrolled 40 lines and text is scrolled
25 lines (1 page); CTRL+ARROW key does the same.









Load the Secondary Bitmap                      #4
~~~~~~~~~~~~~~~~~~~~~~~~~~
When you are in the Paint Studio, it uses 2
files. The second is VCXTEMP2.VCX. This file
is like a backup and is used to undo mistakes.
When you begin a new picture or load a picture
this file is automatically created. Autosave
alternates between this file and the primary
VCX. Load this file by clicking Button 2 on
the Horizontal Scroll Bar, when the window
is in an off state.

Click on the Vertical Scroll Bar to load the
Primary VCX.
See STUDIO.DOC for more information.










The Bottom Scroll Bar             #5
~~~~~~~~~~~~~~~~~~~~~
On the window bottom is a bar that houses
the  Window Help Line and the Picture
Positioner.

The Window Help Line
~~~~~~~~~~~~~~~~~~~~~
Ongoing instructions can be found on the bottom bar
when help is available.

The Picture Positioner
~~~~~~~~~~~~~~~~~~~~~~~
When the Window contains a Graphic Picture, if
you Click Button 1 the picture is moved Right
an amount proportional to the width of the window.

If you Click Button 2 then the Picture is moved
Left a proportional amount.

1/20 the width of WIndow.
1/20 the Picture Width.

Invaluable when the Image is Zoomed Out!

Scrolling Window Contents to the RIGHT       #6
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use arrow keys or Click  button 2 on the
second left bottom scroll button and text
or graphics is scrolled one line to the right.

Click button 1 and the picture is scrolled 40 lines
or text is scrolled 25 columns to right.

If the Window is a Graphic Picture then this scroll
button will cause all the pixels to shift right one.
If the picture is zoomed out more than 3 it will
not clear the screen first.
Both Buttons inside the window anywhere clears and
redraws the screen.









Scrolling Window Contents  UP          #7
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use arrow keys or Click  button 2 on the left
bottom scroll button and text or graphics is
scrolled one line up.

Use PGUP key or Click button 1 and the picture
is scrolled 40 lines or text is scrolled
25 lines up.

If the Window is a Graphic Picture then this scroll
button will cause all the pixels to shift up one.
If the picture is zoomed out more than 3 it will
not clear the screen first.
Both Buttons inside the window anywhere clears and
redraws the screen.








Left Vertical Scroll Bar                 #8
**************************

For Pictures
~~~~~~~~~~~~
To quickly move to an area of a large picture,
click Button 1  on the bar to move the picture down.
Button 2 on the bar to move the picture up.
A place marker is left temporarily.

For Text
~~~~~~~~
To move down a large text file, Click button 1 on the
left vertical scroll bar.
The file is scrolled to the corresponding length of
the file.

Invaluable for manuevering around large files!







Scrolling Window Contents  Down      #9
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use arrow keys or Click  button 2 on the left
bottom scroll button and text or graphics
is scrolled one line down.

Use Pgdn key or Click button 1 and the picture
is scrolled 40 lines or text is scrolled
25 lines down.

If the Window is a Graphic Picture then this scroll
button will cause all the pixels to shift down one.
If the picture is zoomed out more than 3 it will
not clear the screen first.
Both Buttons inside the window anywhere clears and
redraws the screen.








Full Screen window                       #10
~~~~~~~~~~~~~~~~~~~
1) Click on the left top corner button. The
window is full screen.
The controls are still there but they are
just outside the screen. You may also use
the PGUP, PGDN and cursor keys to move the
window contents. See STUDIO.DOC


To view text full screen wide, without scroll bars
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1) Use arrow keys to move text to edges.

2) Use Pgdn or Pgup to read.

##################################################
Click on #11 to activate Test Window.

To Exit Any Window Click any Button outside the Window.



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
This is a test Window. See STUDIO.DOC for ALT + Key controls.

If you delete this file:
1)Use DOS undelete commmand to restore WINTEST.SHW
or
2)Use the Install option in Configit to unpack Fonts, Palettes,
Docs, Clip Art etc. Caution all existing files are replaced by
originals including palettes.

User Tip
~~~~~~~~~
If you are not using the keyboard, you are only using
half the program. See Keyboard Control in STUDIO.DOC

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
* Text in a window with a choice of fonts.
* Vector Objects wherever you want them.
* Zoomable Animation 100x80      (ACT1)




























   Send a sensitive note
   to someone special.