DESCRIPTION : la liaison s'etablit correctement jusqu'a la mise en
place des no IP ; apres cela, message :
"ppp0 not connected to a TTY ! can't go open !"
(les points d'exclamations ne sont pas de moi : j'en deduis que la
situation trouvee par pppd est "grosse", mais mon ignorance ne m'a
pas permis d'aller plus loin)
Je n'ai rien trouve dans PPP howto, Readme divers, guide du routard,
ni dans le bouquin Administration reseau sous Linux ... aussi je
fais appel au peuple linuxien.
Merci beaucoup.
Ci-dessous, le fichier /var/adm/notice, puis mon fichier d'activation
de pppd.
Dec 10 20:02:39 lunix syslogd: restart
Dec 10 20:02:44 lunix pppd[611]: pppd 2.1.2 started by root, uid 0
Dec 10 20:02:44 lunix pppd[611]: Connecting with </usr/sbin/chat -v ABORT ERROR ABORT "NO CARRIER" ABORT BUSY "" \ AT OK ATZ OK "AT&K3&B1&N8" OK ATDT61537199 CONNECT \ "" username: devpoly password: dev2412 annex: ppp>
Dec 10 20:02:46 lunix chat[612]: abort on (ERROR)
Dec 10 20:02:46 lunix chat[612]: abort on (NO CARRIER)
Dec 10 20:02:46 lunix chat[612]: abort on (BUSY)
Dec 10 20:02:46 lunix chat[612]: send (AT^M)
Dec 10 20:02:46 lunix chat[612]: expect (OK)
Dec 10 20:02:46 lunix chat[612]: AT^M^M
Dec 10 20:02:46 lunix chat[612]: OK -- got it
Dec 10 20:02:46 lunix chat[612]: send (ATZ^M)
Dec 10 20:02:46 lunix chat[612]: expect (OK)
Dec 10 20:02:46 lunix chat[612]: ^M
Dec 10 20:02:46 lunix chat[612]: ATZ^M^M
Dec 10 20:02:46 lunix chat[612]: OK -- got it
Dec 10 20:02:46 lunix chat[612]: send (AT&K3&B1&N8^M)
Dec 10 20:02:46 lunix chat[612]: expect (OK)
Dec 10 20:02:46 lunix chat[612]: ^M
Dec 10 20:02:47 lunix chat[612]: AT&K3&B1&N8^M^M
Dec 10 20:02:47 lunix chat[612]: OK -- got it
Dec 10 20:02:47 lunix chat[612]: send (ATDT61537199^M)
Dec 10 20:02:47 lunix chat[612]: expect (CONNECT)
Dec 10 20:02:47 lunix chat[612]: ^M
Dec 10 20:03:07 lunix chat[612]: ATDT61537199^M^M
Dec 10 20:03:07 lunix chat[612]: CONNECT -- got it
Dec 10 20:03:07 lunix chat[612]: send (^M)
Dec 10 20:03:07 lunix chat[612]: expect (username:)
Dec 10 20:03:07 lunix chat[612]: 14400/ARQ^M
Dec 10 20:03:08 lunix chat[612]: ^M
Dec 10 20:03:08 lunix chat[612]: ^M
Dec 10 20:03:08 lunix chat[612]: Annex Command Line Interpreter * Copyright 1991 Xylogics, Inc.^M
Dec 10 20:03:08 lunix chat[612]: ^M
Dec 10 20:03:08 lunix chat[612]: Checking authorization, Please wait...^M
Dec 10 20:03:08 lunix chat[612]: Annex username: -- got it
Dec 10 20:03:08 lunix chat[612]: send (devpoly^M)
Dec 10 20:03:08 lunix chat[612]: expect (password:)
Dec 10 20:03:08 lunix chat[612]: devpoly^M
Dec 10 20:03:08 lunix chat[612]: Annex password: -- got it
Dec 10 20:03:08 lunix chat[612]: send (monpasswd^M)
Dec 10 20:03:09 lunix chat[612]: expect (annex:)
Dec 10 20:03:09 lunix chat[612]: ^M
Dec 10 20:03:09 lunix chat[612]: ^M
Dec 10 20:03:09 lunix chat[612]: Permission granted^M
Dec 10 20:03:09 lunix chat[612]: annex: -- got it
Dec 10 20:03:09 lunix chat[612]: send (ppp^M)
Dec 10 20:03:09 lunix pppd[611]: Connected...
Dec 10 20:03:10 lunix linux: ppp: channel ppp0 mtu = 1500, mru = 1500
Dec 10 20:03:10 lunix linux: ppp: channel ppp0 open
Dec 10 20:03:10 lunix linux: ppp_ioctl: set debug level 1, netpacket 0
Dec 10 20:03:10 lunix pppd[611]: set kernel debugging level to 1
Dec 10 20:03:12 lunix d[611]: Setting itimer for 0 seconds in untimeout.
Dec 10 20:03:15 lunix pppd[611]: fsm_sdata(IPCP): Sent code 1, id 1.
Dec 10 20:03:15 lunix pppd[611]: IPCP: sending Configure-Request, id 1
Dec 10 20:03:15 lunix pppd[611]: fsm_rconfnakrej(IPCP): Rcvd id 1.
Dec 10 20:03:15 lunix pppd[611]: fsm_sdata(IPCP): Sent code 1, id 2.
Dec 10 20:03:15 lunix pppd[611]: IPCP: sending Configure-Request, id 2
Dec 10 20:03:15 lunix pppd[611]: fsm_rconfreq(IPCP): Rcvd id 3.
Dec 10 20:03:15 lunix pppd[611]: ipcp: received ADDR
Dec 10 20:03:15 lunix pppd[611]: (192.70.79.101)
Dec 10 20:03:15 lunix pppd[611]: (ACK)
Dec 10 20:03:15 lunix pppd[611]: ipcp: returning Configure-ACK
Dec 10 20:03:15 lunix pppd[611]: fsm_sdata(IPCP): Sent code 2, id 3.
Dec 10 20:03:16 lunix pppd[611]: fsm_rconfnakrej(IPCP): Rcvd id 2.
Dec 10 20:03:16 lunix pppd[611]: local IP address 193.51.133.3
Dec 10 20:03:16 lunix pppd[611]: fsm_sdata(IPCP): Sent code 1, id 3.
Dec 10 20:03:16 lunix pppd[611]: IPCP: sending Configure-Request, id 3
Dec 10 20:03:16 lunix pppd[611]: fsm_rconfack(IPCP): Rcvd id 3.
Dec 10 20:03:16 lunix pppd[611]: ipcp: up
Dec 10 20:03:16 lunix pppd[611]: local IP address 193.51.133.3
Dec 10 20:03:16 lunix pppd[611]: remote IP address 192.70.79.101
Dec 10 20:03:16 lunix linux: ppp: ppp0 not connected to a TTY! can't go open!