Simtel MSDOS 1992 September/Simtel20_Sept92.cdr/msdos/ventura/tdoc794c.arc/TDOC794C.CAP

Text File | 1987-10-03 | 1KB | 38 lines

@TABLE HEADING = Sample Table Created Using Tabs<$ITable Heading Tag><$ITags;Table
Heading>

@TAB TABLE 1 = <B>TP    Signal From    Signal to:    Signal Description<$ITab
Table 1 Tag><$ITags;Tab Table 1><R>


@TAB TABLE 1 = 1    J1, Pin 5    P46, Pin 19    Temp Controller, 50 ma

@TAB TABLE 1 = 2    J1, Pin 7    P19, Pin 7    Gate Trigger Unit

@TAB TABLE 1 = 3    J1, Pin 8    P19, Pin 8    Chop-Off Limiter

@TAB TABLE 1 = 4    J1, Pin 9    P19, Pin 22    Pre-Amplifier Bias

@TAB TABLE 1 = 5    J1, Pin 10    P19, Pin 11    Power Contactor Latch

@TAB TABLE 1 = 6    J1, Pin 11    P19, Pin 25    ADC Threshold Signal

@Z_CAPTION = Illustrations are placed within the bounds of the frame.
To ensure adequate white space above and below the frame, the Vertical
Padding option on the Frame Sizing and Scaling menu is set to 1 pica.
Also note that each frame placed within a chapter is a unique entity,
therefore you can set margins independently for every frame to control
the white space surrounding illustrations.<$IZ Box Text Tag><$ITags;Z
Box Text>

@Z_BOXTEXT = Objective Lens

@Z_BOXTEXT = Stage

@Z_BOXTEXT = Mirror

@Z_BOXTEXT = Coarse Focusing Knob

@Z_BOXTEXT = Occular