home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Simtel MSDOS 1992 June
/
SIMTEL_0692.cdr
/
msdos
/
c
/
tools4c.arc
/
MANUAL.TXT
< prev
next >
Wrap
Text File
|
1987-08-15
|
45KB
|
922 lines
TOOLS FOR C
Application Development Package
USERS MANUAL
Shareware Distribution Version 1.0
This version of TOOLS FOR C and it's associated manuals and
support files may be freely copied and distributed as long as
it is distributed in it's entirety and no fees other than
nominal handling fees are charged. The routines in this
library are NOT Public Domain. This is copyrighted material.
The intent behind distributing this version of TOOLS FOR C is
to allow you to use the package on a trial basis and determine
if it meets your needs. If you find yourself using this
package, you MUST register by sending $45.00 to the address
listed below. Upon receipt of your registration fee we will
send you an expanded manual, compiled libraries for all of the
memory models available with your compiler, and the complete
source code to the library. In NO EVENT may you use any of the
routines in TOOLS FOR C for commercial purposes until you
register your copy. We feel that you will find the value of
TOOLS FOR C far exceeds the registration fee and we at BP
SOFTWARE SOLUTIONS, INC. thank you in advance for your
support.
BP Software Solutions, Inc.
642 N. Commodore Drive
Plantation, Fl. 33325
Copyright (C) 1987
BP Software Solutions Inc.
All Rights Reserved
Table of Contents
INTRODUCTION . . . . . . . . . . . . . . . 3
The Manual. . . . . . . . . . . . . . 3
Concerning Compiling. . . . . . . . . 3
VIDEO . . . . . . . . . . . . . . . . . . 4
Video Routines . . . . . . . . . . . 4
Video Attributes . . . . . . . . . . 4
Cursor Control . . . . . . . . . . . 5
Character Output . . . . . . . . . . 5
String Output . . . . . . . . . . . . 6
Screen Scrolling . . . . . . . . . . 6
KEYBOARD . . . . . . . . . . . . . . . . . 7
Keyboard Routines . . . . . . . . . . 7
KEY.H . . . . . . . . . . . . . . . . 7
WINDOWS . . . . . . . . . . . . . . . . . 8
Creating windows . . . . . . . . . . 8
Menugen.Exe . . . . . . . . . . . . . 10
Window Management . . . . . . . . . . 10
Closing Windows . . . . . . . . . . . 11
MENUS . . . . . . . . . . . . . . . . . . 13
Creating Menus . . . . . . . . . . . 13
Menugen . . . . . . . . . . . . . . . 13
Menu Selections . . . . . . . . . . . 13
Error Handling . . . . . . . . . . . 14
menu_text() . . . . . . . . . . . . . 14
Titling Menus . . . . . . . . . . . . 14
Menu Structures . . . . . . . . . . . 15
GLOBAL VARIABLES . . . . . . . . . . . . . 16
INDEX . . . . . . . . . . . . . . . . . . 18
page 3
INTRODUCTION
Introduction
TOOLS FOR C provides a comprehensive library of tested C and
assembler functions to complement the standard library provided
with your C compiler. You will find routines for screen and
keyboard I/O, window management, a menu system, string routines
and more. Included in the shareware distribution version are
compiled libraries for linking with the small memory models
of Microsoft C (R) v4.0, Lattice C (R) v3.x, and Borland
International's Turbo C (R) v 1.0. Upon receipt of your
registration fee, we will send you the libraries for the all of
the memory models supported by your compiler and the complete C
and assembler source code. You will then be able to modify any
of the routines which do not precisely meet your needs.
Furthermore, you will be able to recompile the library using
different optimization flags, different function naming
conventions, or for that matter, a different compiler
altogether.
The Manual
The manual is organized into chapters, each dealing with one
subgroup of routines. The first chapter, video, describes the
functions dealing with screen output. Keyboard deals with the
key() function and the macro keystroke definitions provided with
the package. The third and fourth chapters describe the many
functions and capabilities of the window and menu management
routines in TOOLS FOR C. A detailed explanation of each control
structure is given.
The large reference section details each function, giving
specific calling requirements and examples. The function
reference section is a comprehensive description of each Turbo
Library routine. Each routine is listed with it's function
name, synopsis, a detailed description, and return values if any.
Concerning Compiling
When we developed TOOLS FOR C we chose long, descriptive names
for the functions. This avoids the cryptographer's delight that
results from trying to name too many functions with too few
characters. Therefore, when compiling programs to be linked with
TOOLS FOR C you must be sure to use the compiler option
activating long identifier names. In Lattice C (R) this is the
-n flag, in Microsoft C (R) and Turbo C (R) long names are the
default. The header file TOOLS4C.H should be included in all
source code which uses TOOLS FOR C. MENU.H is necessary in any
code which references the menu() function. KEY.H can be included
as an aid in defining the codes returned by key(), but it's use
is not required. The library does not replace any of the
standard library functions, so link order is not important.
page 4
VIDEO
Video Routines
The video routines provided in the library allow direct hardware
control of Color Graphic Adapters and Monochrome Adapters,
bypassing most of the DOS and BIOS routines. This allows for
much greater display speed and far more flexibility. Direct
hardware control requires that the routines be informed of which
adapter is installed. This is accomplished by calling the
function "vid_type()" which sets a couple of global integer
variables (_vid_buf and _vid_type). A hardware dependent
routine can check these to tell which type of adapter is
presently being used. This function must be called at least
once before any of the video routines are called. If it is not,
a monochrome adapter will be assumed. While direct hardware
control is required for acceptable performance, it also
unfortunately requires a high degree of hardware compatibility
with IBM's CGA or Monochrome Adapter. Most PC compatible video
boards do closely match one of these adapters so running
applications developed using TOOLS FOR C on IBM compatible
computers should present no problems. If you do experience
difficulties, minor changes to the library, using the supplied
source code, will probably solve your problem.
As explained below, control of the video attributes is left
entirely to you. In order to allow selection of monochrome or
color attributes at run time, vid_type() sets a global variable
"_color" to TRUE if the current video mode is 3 (80x25 color
text). If the current video mode is 2 (80x25 B/W text) or 7
(Mono) then "_color" defaults to FALSE. If the current video
mode is not set to one of these values, vid_type() returns ERROR
(-1) instead of OK (0). The return value should be checked as
the TOOLS FOR C video routines are designed to operate only
with the video mode set to one of the eighty column text modes
(CO80, BW80 or MONO). If there is any question as to which mode
the display is in, routines in the library allow you change it
and then return it to the old value before exiting.
Video Attributes
Many of the routines require you to specify a video attribute.
One of the basic decisions made during the design phase of the
library was to not implement video attributes as global variables,
but instead to require that they be passed each time as a
parameter. Any additional work on the part of the programmer that
this approach requires will certainly be repaid in program
maintenance hours. Two global variables are provided which are
set by the vid_type() routine which will allow you to determine
which type of video adapter is installed and whether or not the
color mode is set on a CGA in the event that you want to use
attributes which are not compatible across all modes.
Cursor Control page 5
Two different sets of cursor control routines are included which
provide essentially the same services but require or return
different parameters. One set, curs() and get_curs(), specifies
the cursor location as an encoded integer where the high eight
bits defines the cursor row and the low eight bits defines the
cursor column. The other set, cursor() and get_cursor(),
requires two separate integer variables, one each for the row
and column. To set the cursor location, these are passed as
parameters, but since it is possible to return only one variable
from a C routine, to determine the cursor location it is
necessary to provide the address of two integer variables to
get_cursor(). get_cursor() then stuffs these variables with the
appropriate values.
If it is only necessary to save and restore the cursor location,
then get_curs() and curs() are much easier to use, but if you need
to determine the row or column, or set the cursor to a specific
location, then get_cursor() or cursor() will save some masking and
bit-shuffling.
Throughout the library, screen locations are defined in terms of
(column, row) with the upper left corner of the screen defined as
location (0,0). Columns are numbered from the left most column 0
to the right most column 79 and rows are numbered from the top 0
to the bottom 24. The lower right screen location is (79,24).
Programming note: One way to remove the blinking cursor from
the screen, is to call cursor() with a set of screen coordinates
somewhere off the screen, such as cursor( 1, 25 ). The blinking
hardware cursor will be hidden until another call is made to
cursor() with parameters within the visible area of the screen.
Take care, however, that you do not use any write to screen
routines which write characters at the current cursor position
while the cursor is not visible for obvious reasons.
There are three cursor shape control functions. The first,
cursor_type(), allows you to change the cursor to one of eight
different sizes or to blank it entirely depending on the
parameter passed to it. The other two, normal_cursor() and
block_cursor() set the cursor to the two most commonly used
shapes without the need to specify a parameter.
Character Output
Numerous routines are provided for writing characters to the
screen.
write_tty(), write_a(), and write_ac() write to the current
cursor position. write_tty() uses the bios write_as_tty
function and recognizes special characters like bell and
backspace. write_ac() writes to the cursor position along with
a video attribute and advances the cursor. write_a() does the
same without advancing the cursor.
page 6
write_am() writes multiple copies of the same character along with
a video attribute.
write_al() writes a character and attribute to a specified screen
location without regard for the current cursor location.
String Output
Like the character output routines, there are several string
output routines available which allow writing strings to the
screen beginning at either the current cursor position or a
specified location.
write_str() writes a string to screen beginning at the location
specified, without regard for the cursor, using the supplied
attribute. No special characters are supported however, this is
the quickest routine.
print_string() writes a string and attribute beginning at the
current cursor position and supports the special characters '\n'
'\t' and '\r'. This routine is somewhat slower than write_str()
but much quicker than aprintf().
aprintf() writes a formatted string to the screen using the
specified attribute. All the printf() formatting codes and
control characters are supported. In fact, because the
sprintf() or vprintf() function in the standard library is
called to do the formatting the only thing not supported is
output redirection. Total string length is limited to 255
characters, however.
Screen Scrolling
scroll() provides an easy way to scroll any part of the screen
up or down. You supply the boundaries of the area to scroll, the
direction to scroll, the number of lines to scroll, and the
video attribute to use in filling the newly cleared area of the
screen. Passing the routine a zero for the number of lines to
scroll will result in the entire area being blanked and filled
with the specified video attribute.
page 7
KEYBOARD
Keyboard Routines
The library's keyboard I/O routines are designed to allow you to
easily interface a program to a computer that uses the IBM
PC/XT/AT Extended Ascii format. A single call to key() is all
that is required to get the next keystroke and uniquely identify
it. This is possible because key() returns and integer value
instead of a char value. Any returned value less than 256 (0x0100)
is a normal keyboard character, control character or a value
returned by using the ALT key in combination with the numeric
keypad. If the returned value is 256 (0x0100) or higher, then one
of the function or special keys has been pressed and it's extended
code is in the upper two bytes. In most cases you need not be
concerned with all of this as the return codes for most of the
special keys are defined in the include file KEY.h. To determine
if a particular key has been pressed, just compare the returned
value with it's definition.
Listing of KEY.H
#define TAB 0x0009 #define SFTTAB 0x0f00
#define RETURN 0x000d #define ALT_F4 0x6b00
#define SPACE 0x0020 #define ALT_F5 0x6c00
#define UP 0x4800 #define ALT_F6 0x6d00
#define DOWN 0x5000 #define ALT_F7 0x6e00
#define LEFT 0x4b00 #define ALT_F8 0x6f00
#define RIGHT 0x4d00 #define ALT_F9 0x7000
#define HOME 0x4700 #define ALT_F10 0x7100
#define END 0x4f00 #define CNT_F1 0x5e00
#define PGUP 0x4900 #define CNT_F2 0x5f00
#define PGDN 0x5100 #define CNT_F3 0x6000
#define F1 0x3b00 #define CNT_F4 0x6100
#define F2 0x3c00 #define CNT_F5 0x6200
#define F3 0x3d00 #define CNT_F6 0x6300
#define F4 0x3e00 #define CNT_F7 0x6400
#define F5 0x3f00 #define CNT_F8 0x6500
#define F6 0x4000 #define CNT_F9 0x6600
#define F7 0x4100 #define CNT_F10 0x6700
#define F8 0x4200 #define SFT_F1 0x5400
#define F9 0x4300 #define SFT_F2 0x5500
#define F10 0x4400 #define SFT_F3 0x5600
#define ESC 0x001b #define SFT_F4 0x5700
#define BKSP 0x0008 #define SFT_F5 0x5800
#define INS 0x5200 #define SFT_F6 0x5900
#define DEL 0x5300 #define SFT_F7 0x5a00
#define ALT_F1 0x6800 #define SFT_F8 0x5b00
#define ALT_F2 0x6900 #define SFT_F9 0x5c00
#define ALT_F3 0x6a00 #define SFT_F10 0x5d00
page 8
WINDOWS
Turbo Library Windows
The functions in TOOLS FOR C allow you to quickly create
pop-up, overlapping windows for your own programs. The contents
of the screen under each window is automatically saved when the
window is opened and restored when it is closed. Windows can be
moved around the screen. Overlaid windows can be brought to the
front or closed. The routines will keep track of the saved video
so that when the last window is closed, the original screen will
be intact. Video attributes of the border and the center fill
area can be specified. Cursor or text in a window can be made
relative to the window position so that if you open a window in a
new position any text written to the window will remain in the
same place within the window. You can select any characters you
like for the border. Any character can be specified to fill the
area inside the window's borders.
Creating windows
All of the parameters necessary to open a window are found in a
structure defined in TOOLS4C.H as a typedef "WNDW". Below is the
listing as it appears in TOOLS4C.H with comments added.
typedef struct WNDW {
int left_col_line_char; /* The next eight lines */
int upper_row_line_char; /* specify the characters */
int right_col_line_char; /* to be used for lines */
int lower_row_line_char; /* and corners of the */
int ulcorner_char; /* border */
int urcorner_char;
int llcorner_char;
int lrcorner_char;
int fill_char; /* this char, normally a space, fills */
/* the center of the window */
int line_attr; /* this is the border video attribute */
int fill_attr; /* this is the fill area video attrib. */
int upper_row; /* The next four lines define the */
int left_col; /* boundary of the window. These are */
int lower_row; /* the columns and rows where the */
int right_col; /* border will be placed */
int curr_row; /* an area to store the cursor */
int curr_col; /* position for your own use, they are */
/* not used by the window functions */
/* The remaining structure members are filled in by */
/* the window management functions. You should define */
/* them as zeros or NULLs, as appropriate. */
int buf_size; /* size of the video buffer area */
struct WNDW *prev_wndw; /* pointer to previous window */
struct WNDW *next_wndw; /* pointer to next window */
char *image; /* pointer to video buffer */
} WNDW ;
page 9
To create a window, you need only to define a structure of type
WNDW initialized to the window's desired parameters. You then
call open_window() or open_ex_window() with the address of this
window structure as an argument. See the example below.
struct WNDW head1 ={' ',' ',' ',' ',' ',' ',' ',' ',
' ',0xF,0x70,15,1,79,10,0,0,0,NULL,NULL,NULL};
/* The structure above defines a window with the upper left
corner at 15,1 and the lower right corner at 79,10. The
characters on the top line, just after the opening brace
are the various border and corner characters. The
blank space defined at the beginning of the first line
is the character which will fill the interior of the
window. 0xF is the border's video attribute. 0x70 is
the window interior's video attribute. The next four
integers define the window's location on the screen.
The first two zeros are unused integer variables that
are available for your use. The final zero integer and
three NULLs must be defined as shown. These locations
are filled in and manipulated by various window
functions and should not be modified in any other way.
*/
int ret_code;
ret_code = open_window( &head1 );
if(ret_code == ERROR)
printf("Error opening Window\n");
Alternatively, a pointer of type WNDW can be set equal to the
address of the window structure. This pointer can then be used
to call any of the window management functions which require the
structure address.
struct WNDW head1 ={' ',' ',' ',' ',' ',' ',' ',' ',
' ',0xF,0x70,15,1,79,10,0,0,0,NULL,NULL,NULL};
int ret_code;
WNDW *wind3;
wind3 = &head1;
ret_code = open_ex_window( wind3 );
if(ret_code == ERROR)
printf("Error opening Window\n");
After attempting to open a window, the return code should be
page 10
checked to see if the window was successfully opened. OK, defined
as zero in TOOLS4C.H is returned if successful, and ERROR, defined
as -1 is returned if the routine was not able to allocate memory
for the video buffer. The only limit on the number of windows
which can be open is the memory available. No checking is done
for bogus arguments in the structure definition.
Menugen.Exe
Included in the TOOLS FOR C package is a program - MENUGEN.EXE -
which simplifies the definition of a window. The program allows
you to "point and shoot" the borders of a window, then a series of
menus allow you to select various border and fill characters and
attributes and display them on the screen. When you are satisfied
with the window, an output file is written which can be included
in your program. A pointer to this window structure is also
defined in the file, so all that is necessary is to call the open
window routines with this pointer as an argument, and the same
window which was displayed in MENUGEN will be opened. The window
can be modified simply by changing any of the parameters in the
include file structure.
Window Management
Once a window is open, it can be manipulated by the window
management functions:
clear_window() fill_window()
activate() move_window()
scroll_window() clear_wndw_title()
title_window()
and all of the window printing and cursor control functions. A
short synopsis of most of the functions follows.
clear_window()
This function is simply a clear_screen for the currently
active window. All the area inside the borders is changed to
blank characters using the current fill attribute for the
window.
activate()
All of the open windows are managed by a doubly linked list,
with the currently active window being the last one in the
chain. A window can be made the active window by calling
activate() with the address of it's window structure as an
argument. The window routines will bring that window to the
top on the screen if any other windows are covering any part
of it, and the linked list will be updated to show that
window as being at the end of the list. A global WNDW
page 11
pointer, "last_wndw" will be updated to point to the new
active window.
title_window()
Allows you to easily insert a title string into the border
area of a window using any video attribute you like. It will
automatically right or left justify or center the string in
either the top or bottom border, depending on the
justification code that you supply.
clear_wndw_title()
Removes any titles in either the top or bottom border of a
window and restores the border characters and attributes as
defined in the window structure.
fill_window()
fill_window() quickly redraws the interior of a window using
the default fill character and attribute as defined in the
window structure. This function provides an efficient means
of clearing a window when something other than a space
character is the fill character.
move_window()
Provides an easy way to move a window's position on the
screen. Each call will move the window either left, up,
right, or down the number of screen character positions
supplied. The window will not, however, move past the point
where one of the borders meets the edge of the screen.
scroll_window()
scrolls the area within the borders of the window either up
or down, a specified number of lines. The area cleared by
the scroll is filled with the current window fill attribute
defined in the window structure.
Closing Windows
An open window can be closed at any time with a call to
close_window() using the window structure address or a pointer to
this address as an argument. In the example below assume
that head1 is a structure of type WNDW.
page 12
int ret_code;
WNDW *wind3;
wind3 = &head1;
ret_code = open_window( wind3 );
if(ret_code)
printf("\nError opening window\n");
close_window( wind3 );
If the window is not the active window, it is activated to bring
it to the top of the list. The screen is restored and all the
links binding the window to the list are deleted. Finally, the
memory allocated to the video buffer is freed.
page 13
MENUS
Creating Menus
Menus, like windows, can easily be added to your programs simply
by defining three structures and making a call to the menu
executive function menu(). All of the information needed by
menu() is in these three structures. The first is the WNDW
structure that the menu will occupy. This is a standard window
structure as described above in the section on windows and
defines the video area and attributes of the menu. All screen
references in the menu are relative to this window, so after a
menu is defined, it can be moved around the screen simply by
changing the window position. This structure is pointed to by
the menu structure typedef MENU. MENU describes the cursor type
and it's default video attributes, the menu title, the number of
selections in the menu, pointers to default help and error
functions, the help and exit hot keys, pointers to the menu
window structure and an array of structures of typedef SEL.
Struct SEL defines an individual menu selection. It contains a
pointer to the selection text line. The starting column and row
relative to the menu window where this text will be displayed.
Video attributes for the selection, if something other than the
default attributes are to be used. A pair of activate keys are
defined which will call the selection without having to use the
cursor. A pointer to a help function which you supply can be
included to provide context sensitive help. Either a pointer to
the function to be called or a text string to a program name to
be executed must be provided. The other is set to a NULL.
Finally an int value determines if the menu should be exited to
it's caller after the called function returns or if another
selection from the menu will be made available.
Menugen
As you may have deduced from the paragraph above, setting up a
menu requires entering a lot of information into several complex
structures. This would be a tedious task indeed were it not for
the program MENUGEN. MENUGEN automates the process of setting
up a menu, allowing you to interactively build the menu on
screen, and when completed, it writes a header file containing
all the necessary structures. Complete information on the
running MENUGEN is included in the appendix.
Menu Selections
Selections can be made from the menu either by using the
activate keys defined for each item in the SEL list or by using
a bounce bar pseudo cursor. This cursor highlights the
selection text with a different video attribute than the non
selected text. The cursor is moved from item to item using the
cursor keys. The next closest menu item in the direction indicated
by the cursor arrow is selected. When the desired item is
highlighted, pressing the return key runs it's function or
program. If the operation to be performed when an item is
page 14
selected is a function, then the function call is made with the
index of that item in the array of SEL structures as an
argument. This way one function can be used to service several
similar items, using the argument to determine which selection
was made. Three types of pseudo cursors are supported. One
highlights the area exactly as long as the selected item.
Another highlights an area as long as the longest item in the
SEL list. The last highlights the full length of the menu
window. The int value pcursor_type in MENU determines which
type is used and is decoded as follows:
0 == String length
1 == Max string length
2 == Full window length
Error Handling
All functions called by the menu routine must return an error
code. If the call returns without error then a zero should be
returned. If any other value is returned, then the error
function pointed to in the MENU structure is called with that
error code as an argument. You can then decode this value and
take appropriate action. Pressing an undefined key while in the
menu calls the error function with an error code of zero. This
is usually handled simply by beeping the console speaker and
returning.
menu_text()
A place is provided in the MENU structure for a pointer to a
function which is called after the menu window is opened, and
before the selections are written to the screen. This function
can be used write descriptive text or otherwise embellish the
menu's screen.
Titling Menus
A menu title can be defined which will written in the border of
the menu's window. Any video attribute can be defined for the
title and it can be either centered, left justified, or right
justified in the top or bottom border. If the length of the
title string is longer than width of the window, the text is
truncated to fit. Positioning of the title is determined by the
int value title_format in MENU as follows:
1 == Upper Left
2 == Upper Center
3 == Upper Right
4 == Lower Left
5 == Lower Center
6 == Lower Right
page 15
Menu Structures
Below is a listing of the structures defined in the header menu.h
typedef struct MENU {
struct WNDW *menu_window; /* Pointer to the menu window structure */
int default_non_select_att;/* Usually the same as window fill attr */
int default_cursor_att; /* Attribute of items when selected */
int title_format; /* Position of menu title on border(1-6)*/
int window_title_att; /* Video attribute of menu title */
char *window_title_text; /* Pointer to menu title text string */
int pcursor_type; /* Type of selection cursor (0-2) */
int exit_key; /* Hot key to exit menu, Usually ESC */
int help_key; /* Hot key to call help function, if any*/
int (*menu_text)(); /* Ptr to function to write text to scrn*/
int (*error_fn)(); /* Ptr to user supplied error handler */
struct SEL *sel_list; /* Ptr to the first in array of SELs */
int num_sel; /* Number of menu selections */
} MENU;
typedef struct SEL{
char *text; /* Pointer to item selection text string */
int start_col; /* Starting col in window for text string */
int start_row; /* Starting row in window for text string */
int sel_att; /* Item sel video attr, Zero for default */
int unsel_att; /* Item unselected video attribute or Zero*/
int activate_key_1; /* First Activate hot key */
int activate_key_2; /* Second Activate hot key */
int (*do_function)(); /* Ptr to selected function or NULL */
char *exe_call; /* Ptr to program name string or NULL */
int (*help_function)(); /* Ptr to optional help fctn or NULL */
int exit; /* exit menu after command, Zero if no */
} SEL;
page 16
GLOBAL VARIABLES DEFINED IN TOOLS4C.LIB
char *_vid_buf Is set by vid_type() to point to the segment
of the video display buffer. It is
initialized to point to the segment of a
monochrome card. If the current video mode is
something other than seven, this is changed to
the segment of a color-graphics card. This
value is used by a large number of the screen
I/O routines.
int _vid_type Is set by vid_type() to reflect what type of
video card is being used. The current video
mode is checked and if the mode is seven,
_vid_type is set to zero. If any other mode is
set, a color/graphics card is assumed and
_vid_type is set to 1.
int _color Is set by vid_type() to 1 if the current video
mode is set to CO80. It is set to 0 if the
mode is set to BW80 or MONO. This variable is
used to select between color and monochrome
video attributes.
int _retrace Is also set by vid_type() to 1 if a
color/graphics video board is being used to
enable checking for retrace blanking. Many of
the video routines will run much quicker if
this is set to zero and you have a video card
which allows accessing video memory without
generating snow.
char temp_str[256] This is a global data buffer used by many of
the string handling routines. You can use
this area as a temporary data buffer in your
own routines as long as you do not make any
calls to turbo.lib functions before you are
finished with any data that you have stored
there.
int insert_flag This flag is toggled by the insert key when in
get_field to switch between insert
(insert_flag == 1) and over_write (insert_flag
== 0) modes.
WNDW *first_wndw Is a pointer to the first window structure in
the linked list of open windows. If there are
no windows open it is set to NULL.
WNDW *last_wndw Is a pointer to the last window structure in
the linked list of open windows. If there are
no windows open it is set to NULL, otherwise
it always points to the active window.
page 17
WARRANTY AND DISCLAIMER
Before registration, there is no warranty whatsoever.
After you register your copy of TOOLS FOR C, we offer
you the same limited warranty most software developers
offer. That is to say, with the exception of the
physical media upon which you receive your software,
there is no warranty ( within 90 days, we will replace
any bad disks). We have done our best to provide a
useful library of C functions, we let you try before
you buy, and we give you the source code to the
library. The complete responsibility for determining
whether this library meets your needs, and ensuring
that any programs developed using any of it's
functions are bug free and will run as intended rests
with you, the application programmer.
That's it, That's all, There ain't no more.
page 18
INDEX
activate() . . . . . (10) Move_window() . . . (11)
Character Output . . ( 5) Open_ex_window() . . ( 9)
clear_window() . . . (10) Open_window() . . . ( 9)
close_window() . . . (11) Pseudo cursor() . . (13)
Closing Windows . . (11) Screen Scrolling . . ( 9)
Creating Menus . . . (13) scroll() . . . . . . ( 6)
Creating Windows . . ( 8) String Output . . . ( 9)
Curs() . . . . . . . ( 5) struct WNDW . . . . ( 8)
Cursor() . . . . . . ( 5) struct MENU . . . . (15)
Cursor Control . . . ( 5) struct SEL . . . . . (15)
first_wndw . . . . . (16) Titling menus . . . (14)
Get_cursor() . . . . ( 5) temp_str . . . . . . (16)
GLOBAL VARIABLES . . (16) vid_type() . . . ( 4)(16)
Identifier Length . ( 3) VIDEO . . . . . . . ( 4)
insert_flag . . . . (16) Video Attributes . . ( 4)
INTRODUCTION . . . . ( 3) Video Routines . . . ( 4)
Key() . . . . . . . ( 7) WINDOWS . . . . . . ( 8)
KEYBOARD . . . . . . ( 7) Window Management . (10)
KEY.H . . . . . . . ( 7) _color . . . . . . . (16)
last_wndw . . . . . (16) _retrace . . . . . . (16)
Menu() . . . . . . . (13) _vid_buf . . . . . . (16)
Menugen.Exe . . (10)(13) _vid_type . . . ( 4)(16)
MENUS . . . . . . . (13)