home *** CD-ROM | disk | FTP | other *** search
/ Simtel MSDOS 1992 June / SIMTEL_0692.cdr / msdos / laptop / tosh3100.inf < prev   
Text File  |  1988-11-15  |  3KB  |  96 lines

  1. Newsgroups: comp.sys.ibm.pc,comp.periphs
  2. Subject: Re: Help with disk connector
  3. Summary: Toshiba PC support BBS
  4.  
  5. In article <1020@adds.newyork.NCR.COM> kieran@adds.newyork.NCR.COM (Joe Cabana) writes:
  6. >... Toshiba 1200H portable ...
  7. >The only problem I have is I can't get the pinout for the external floppy
  8. >connector.
  9. >... a wireing diagram for a DB-25 to 34 pin
  10. >edge card cable ...
  11.  
  12. All users of Toshiba PCs should take advantage of what I consider to be
  13. an excellent customer support system.  The best part is that it's free!
  14.  
  15. Toshiba operates a bulletin board dedicated to supporting their
  16. personal computer product line.  The phone number is 714-837-4408
  17. and they support 300/1200/2400 bps.  Two of the files that you can
  18. download from this BBS are called 3100-IBM.TXT and OTHRCONN.TXT and
  19. they describe the disk drive cable and the connector pinouts, respectively.
  20. For your enjoyment, they are included below:
  21.  
  22. ------- File 3100-IBM.TXT
  23.  
  24. 1100+ or 3100 to IBM Floppy Disk
  25.  
  26.     Male DB-25 to 34 pin Card Edge connector
  27.  
  28.         1    33 & 34
  29.         2    8
  30.         3    26
  31.         4    28
  32.         5    30
  33.        6 to 9 nc
  34.         10    12
  35.         11    16
  36.         12    22
  37.         13    24
  38.         14 nc
  39.         15    32
  40.         16    18
  41.         17    20
  42.       18 to 25    All odd pins
  43.  
  44. -------- File OTHRCONN.TXT
  45.  
  46. RGB Connector
  47.  
  48. 1 & 2    Ground
  49. 3    Red
  50. 4    Green
  51. 5    Blue
  52. 6    Intensity
  53. 7    Not Used
  54. 8    Horizantal Sync
  55. 9    Vertical Sync
  56.  
  57.  
  58. Printer Port            |    Floppy Port
  59.                 |
  60. 1    Strobe        O    |    1    External drive Ready    I
  61. 2    Data 0        O    |    2    Index            I
  62. 3    Data 1        O    |    3    Track 0            I
  63. 4    Data 2        O    |    4    Write Protected        I
  64. 5    Data 3        O    |    5    Read Data        I
  65. 6    Data 4        O    |    6    Disk Change        I
  66. 7    Data 5        O    |    7-9    Not Used
  67. 8    Data 6        O    |    10    Drive Select -B        O
  68. 9    Data 7        O    |    11    Motor On -B        O
  69. 10    Ack        I    |    12    Write Data        O
  70. 11    Busy        I    |    13    Write Enable        O
  71. 12    Paper End    I    |    14    300 Kbps Data Rate    O
  72. 13    Select        I    |    15    Side Select        O
  73. 14    Auto Feed    O    |    16    Direction        O
  74. 15    Error        I    |    17    Step            O
  75. 16    Printer Init    O    |    18-25    Ground
  76. 17    Select In    O    |    
  77. 18-25    Ground            |
  78.  
  79. --------
  80.  
  81. Make sure your disk drive is jumpered as drive "B" (DS1).
  82.  
  83. I took this one step further with my 3100.  The controller in the
  84. 3100 will support 1.2MB drives, so I added the extra wire between
  85. DB25 pin 14 and edge connector pin 2.  I mounted two drives in one
  86. box and set up a toggle switch on the drive-select line to switch
  87. between the 360K and 1.2M drives.  When switching between drives
  88. you also need to run the Toshiba-supplied TEST program and change the
  89. setup for the second diskette drive.
  90.  
  91.     Good luck!
  92.  
  93. -- 
  94. Bob Hoffman, N3CVL       {allegra, bellcore, cadre, idis, psuvax1}!pitt!hoffman
  95. Pitt Computer Science    hoffman@vax.cs.pittsburgh.edu
  96.