home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3
/
hamradioversion3.0examsandprograms1992.iso
/
mods
/
newmods3
/
bc760xlt.1
< prev
next >
Wrap
Text File
|
1991-02-21
|
1KB
|
31 lines
BC760XLT.1
THE FOLLOWING "MAGICAL" MODIFICATION WILL ALLOW RECEPTION OF CELLUAR PHONE
BAND ON A BEARCAT 760XLT. NOTE- THIS MODIFICATION SHOULD BE PERFORMED BY
SOMEONE VERY FAMILIAR WITH ELECTRONIC COMPONETS. THIS WILL ALSO VOID
YOUR WARRANTY. AUTHOR ASSUMES NO RESPONSIBILITY WHATSOEVER.
1- Disconnect power cord from wall outlet, remove the four screws
holding the bottom cover on. Remove bottom cover carefully, speaker
wires are attached.
2- Locate the large 64 pin microprocessor chip near front of the radio.
Noting the indented dot which marks pin one, count along row to pin
20. Cut that pin close to the circuit board so if you ever want you
could tack solder it back together.
Chip im my unit has following numbers:
7D3
HD 40740085
JAPAN
3- tTemporarily reconnect power to the radio and attempt to program 845.000
Mhz., confirming cellur band restoration. Frequencies may be entered in
12.5 Khz, not 30 Khz, increments.
4- This completes the magical instructions, disconnect power, reassemble
scanner in reverse order. Rember performing this magic voids your
warranty, not to mention the fact it is illegal and if the King's
"henchmen" catch you, you mab be severely fined or maby even thrown into
dungeon.