1. IBM compatible computer (80386/486/586) with PCI or VESA local bus system.
2. One free PCI or VL Bus system expansion slot
3. MS-DOS operating system, version 5.0 or later
4. at least 4 MB RAM
5. Screwdriver
Warning!
Prevent damage by static electricity. Static electricity can cause severe damage to microcircuits, but here are some easy ways to see that it doesn't happen.
1. Hold the SPEA card on its edges only. Don't touch edge connectors or exposed circuitry.
2. Leave the SPEA card in the anti-static protective bag until ready to install it in your computer.
3. If possible, ground your body when handling the SPEA card. The metal power supply housing is generally considered the best place to ground yourself.
4. Do not place the SPEA card on a metal surface.
5. Make the least possible movement to avoid building up static electricity from your clothing, carpets and furniture.