2. Click the Video In button and then the Advanced Configuration button of the remote control (see online help) and select the type of input signal (PAL etc.) before making the changes you require for the capture file (length, size, frame rate etc. in the same dialogue box)
3. Click on the option 'Capture file' and enter a path and file name.
4. Make sure the option 'Hit OK to capture'is marked and the time limit set to 10 seconds. Click on OK.
5. Start your Video In source (e.g. camcorder or VCR)
6. Just before the first frame of the recording sequence click on the red record button of the MediaStation (a dialogue box with OK appears)
7. Hit the Enter key to start the recording into an AVI file when you reach the first recording image. The default AVI file is CAPTURE.AVI, located in your SHOWTIME directory.
Worth knowing ...
- A recording for about 10 seconds needs about 4 MB space on your hard disk.
- Recordings into a RAMDRIVE are smoother than those made directly onto a hard disk. They do not playback faster but jump less than hard disk recordings.
- The best AVI playback results are archieved with the 160 x 120 resolution
