Meeting Pearls 3

home *** CD-ROM | disk | FTP | other *** search

/ Meeting Pearls 3 / Meeting_Pearls_III.iso / Pearls / comm / Fido / TrapDoor / docs / TrapList.guide (.txt) < prev next >

Wrap

Amigaguide Document | 1994-06-23 | 54KB | 987 lines

@DATABASE "A Guide To TrapList" @INDEX index @AUTHOR "Maximilian Hantsch" @(C) Copyright 1994 by Maximilian Hantsch, all rights reserved. @NODE MAIN "A Guide To TrapList" @{B}Table of Contents@{UB} @{" 1. Introduction " link 1} @{" 2. Basics " link 2} @{" 3. The Nodelist " link 3} @{" 3.1. General Information " link 3.1} @{" 3.2. Details " link 3.2} @{" Field 1: Keyword " link 3.3} @{" Field 2: Zone/Region/Net/Node number " link 3.4} @{" Field 3: Node name " link 3.5} @{" Field 4: Location " link 3.6} @{" Field 5: Sysop name " link 3.7} @{" Field 6: Phone number " link 3.8} @{" Field 7: Baud rate " link 3.9} @{" Field 8: Flags " link 3.10} @{" 3.11. Example Nodelist Entries " link 3.11} @{" 3.12. An Example Fake Pointnet " link 3.12} @{" 4. The Nodediff " link 4} @{" 4.1. General Information " link 4.1} @{" 4.2. Details " link 4.2} @{" 5. Configuration " link 5} @{" 6. Configuration Statements " link 6} @{" 6.1. BUFFERSIZE buffersize " link 6.1} @{" 6.2. (NO)CHECKCRC " link 6.2} @{" 6.3. COMMENT comment-identifier " link 6.3} @{" 6.4. COST costs dial-prefix [dial-prefix...] " link 6.4} @{" 6.5. (NO)DELOLDDIFFS " link 6.5} @{" 6.6. (NO)DELOLDLISTS " link 6.6} @{" 6.7. DIAL original-string replacement-string " link 6.7} @{" 6.8. (NO)GENNEWSTYLE " link 6.8} @{" 6.9. (NO)GENOLDSTYLE " link 6.9} @{" 6.10. NODELIST nodelistname [DIFF diffname] " link 6.10} @{" 6.11. NODELISTPATH path " link 6.11} @{" 6.12. PASSWORD password node [node...] " link 6.12} @{" 6.13. (NO)QUIET " link 6.13} @{" 6.14. REPORT reportfile " link 6.14} @{" 6.15. ZONE zone " link 6.15} @{" 7. Example Configuration File " link 7} @{" 8. Processing The Lists " link 8} @{" 9. Return Values " link 9} @{" 10. Past And Future " link 10} @{" 11. Registration " link 11} @{" 12. Politics " link 12} @{" 12.1. Distribution " link 12.1} @{" 12.2. Support " link 12.2} @{" 12.3. No Warranty " link 12.3} @{" 12.4. Disclaimer " link 12.4} @{" 13. Acknowledgements " link 13} @{" 14. Index " link index} @ENDNODE MAIN TrapList TrapDoor's Faaaast NodeList Processor Version 1.51 Copyright (c) 1990-1994 Martin Laubach and Maximilian Hantsch All rights reserved TrapList's Faaaast Manual Saturday 28-May-94 00:44:23 Copyright (c) 1990-1994 Martin Laubach and Maximilian Hantsch All rights reserved This manual is intended to be read from front to back for more convenience. @NODE 1 "Introduction " 1. @{B}Introduction@{UB} This document is a brief description of TrapList, TrapDoor's @{B}fast@{UB} Nodelist Processor, explaining how to set up the software in order to compile FidoNet compatible Nodelists and apply Nodediffs to them. Please read the @{B}entire@{UB} manual before using TrapList. TrapList reads FidoNet compatible Nodelist and Nodediff files and produces an index and an extra file as outputs. These files are later used by TrapDoor to access the actual Nodelist in a fast way and to obtain important data from there, such as telephone numbers and session passwords. @ENDNODE 1 @NODE 2 "Basics " 2. @{B}Basics@{UB} TrapList is a CLI based application, it can't be run from WorkBench. It accepts a wide range of configuration statements that allow an easy and accurate configuration. On invocation through a standard commandline interface or shell, TrapList will parse its configuration file, look for nodelist and nodediff files, apply matching nodediffs, parse the final nodelists, sort the nodes, delete duplicate entries and finally, write out an index as well as an extra file, both of them to the directory specified in the NODELISTPATH configuration statement. @ENDNODE 2 @NODE 3 "The Nodelist " 3. @{B}The Nodelist@{UB} @ENDNODE 3 @NODE 3.1 "General Information " 3.1. @{B}General Information@{UB} @{"The Nodelist" link 3} is a file that contains important data about all the nodes in FidoNet. It is often called "the glue which holds the network together". It is FidoNet's "phone book" and it defines the top-level network structure. @{"The Nodelist" link 3} is published each Friday as an ASCII text file named NODELIST.nnn, where nnn is the day-of-year of the Friday publication date. This file is packed into an standard archive file (using System Enhancement Associates' ARC file format) named NODELIST.Ann, where nn are the last two digits of day-of-year. You can skip the next chapter if you want. It is just here to supply you with additional background information about the format of the nodelist. You may want to come back to it when you need to build your own private nodelists, such as for a private point network. @ENDNODE 3.1 @NODE 3.2 "Details " 3.2. @{B}Details@{UB} @{"The Nodelist" link 3} contains two kinds of lines, comment lines and data lines. Each line is terminated with an ASCII carriage return and line feed character sequence, and contains no trailing white-space (spaces, tabs, etc.). The file is terminated with an end-of-file character (EOF = decimal character value 26). Comments lines contain a semicolon (;) in the first character position followed by zero or more alphabetic characters called "interest flags". The remainder of a comment line (with one exception, treated below) is free-form ASCII text. There are five interest flags defined as follows: ;S This comment is of particular interest to Sysops. ;U This comment is of particular interest to BBS users. ;F This comment should appear in any formatted "Fido List". ;A This comment is of general interest (shorthand for ;SUF). ;E This comment is an error message inserted by the nodelist generating program MakeNL. ; This comment may be ignored by a nodelist processor. The first line of a nodelist is a special comment line containing identification data for the particular edition of the nodelist. The following is an example of the first line of a nodelist: ;A FidoNet Nodelist for Friday, July 3, 1987 -- Day number 184 : 15943 This line contains the general interest flag, the day, date, and day-of-year number of publication, and ends with a 5-digit decimal number with leading zeros, if necessary. This number is a 16-bit cyclic redundancy check (CRC) for the entire Nodelist file to ensure its integrity. The CRC may be used to verify that the file has not been edited. The importance of this will become evident in the discussion of NODEDIFF, below. The content of the remaining comments in the nodelist are intended to be informative. TrapList does not have any interest in them at all. A nodelist data line contains eight variable length "fields" separated by commas (,). No space characters are allowed in a data line, and underscore characters are used in lieu of spaces. The term "alphanumeric character" is defined as the portion of the ASCII character set from 20 hex through 7E hex, inclusive. The following discussion defines the contents of each field in a data line. @ENDNODE 3.2 @NODE 3.3 "Field 1: Keyword " @{B}Field 1: Keyword@{UB} The keyword field may be empty, or may contain one of the following: Zone -- Begins the definition of a geographic zone and defines its coordinator (Zone:0/0.0). All the data lines following a line with the "Zone" keyword down to, but not including, the next occurrence of a "Zone" keyword, are regions, networks, and nodes within the defined zone. Region -- Begins the definition of a geographic region and defines its coordinator (Zone:Region/0.0). All the data lines following a line with the "Region" keyword down to, but not including, the next occurrence of a "Zone", "Region", or "Host" keyword, are independent nodes within the defined region. Host -- Begins the definition of a local network and defines its host (Zone:Host/0.0). All the data lines following a line with the Host keyword down to, but not including, the next occurrence of a "Zone", "Region", or "Host" keyword, are local nodes, members of the defined local network. Hub -- Begins the definition of a routing subunit within a multilevel local network and defines its hub system (Zone:Host/Hub.0). The hub is the routing focal point for nodes listed below it until the next occurrence of a "Zone", "Region", "Host", or "Hub" keyword. The hub entry MUST be a redundant entry, with a unique number, for one of the nodes listed below it. This is necessary because some nodelist processors eliminate these entries in all but the local network. Pvt -- Defines a private node with an unlisted telephone number. Private nodes are only allowed as members of local networks. Hold -- Defines a node which is temporarily down. Mail may be sent to it and is held by its host or coordinator. Down -- Defines a node which is not operational. Mail may NOT be sent to it. This keyword may not be used for longer than two weeks on any single node, at which point the "down" node is to be removed from the nodelist. <empty> -- Defines a normal node entry (Zone:Host/Node.0 or Zone:Region/Node.0). Point -- Defines a point entry in a private pointnet (Zone:Region/Node.Point). This keyword is never used in the FidoNet distribution nodelist, but it is a TrapList extension to allow easy setup of private pointnets. Points defined with this keyword belong the the previously listed node and end at the next Zone, Region, Host, Hub, or normal node entry. @ENDNODE 3.3 @NODE 3.4 "Field 2: Zone/Region/Net/Node number " @{B}Field 2: Zone/Region/Net/Node number@{UB} This field contains only numeric digits and is a number in the range of 0 to 32767. If the line had the "Zone", "Region", or "Host" keyword, the number is the zone, net, or region number, and the node has an implied node number of 0. Otherwise, the number is the node number. The zone number, region or net number, and the node number, taken together, constitute a node's FidoNet address. Zone numbers must be unique. Region or net numbers must be unique within their zone. Hub numbers must be within their net. Node numbers must be unique within their region (for regional independents) or net (for members of a local network). Duplicate node numbers under different hubs within the same net are not allowed. @ENDNODE 3.4 @NODE 3.5 "Field 3: Node name " @{B}Field 3: Node name@{UB} This field may contain any alphanumeric characters other than commas and spaces. Underscores are used to represent spaces. This is the name by which the node is known. If this field contains the characters "->", the rest of the line will not be parsed (and should be omited). This is never used in the FidoNet distribution nodelist, but it is a TrapList extension. It means that internal variables will be set to the number provided in field 2, but the node will not be entered into the index file. (There is not even data that could be entered.) The "->" extension allows easy setup of private pointnets. See the chapter about fake pointnets. @ENDNODE 3.5 @NODE 3.6 "Field 4: Location " @{B}Field 4: Location@{UB} This field may contain any alphanumeric characters other than commas and spaces. Underscores are used to represent spaces. This field contains the location of the node. It is usually expressed as the primary local location (town, suburb, city, etc.) plus the identifier of the regional geopolitical administrative district (state, province, department, county, etc.). Wherever possible, standard postal abbreviations for the major regional district should be used (IL, BC, NSW, etc.). @ENDNODE 3.6 @NODE 3.7 "Field 5: Sysop name " @{B}Field 5: Sysop name@{UB} This field may contain any alphanumeric characters other than commas and spaces. Underscores are used to represent spaces. This is the name of the system operator. @ENDNODE 3.7 @NODE 3.8 "Field 6: Phone number " @{B}Field 6: Phone number@{UB} This field contains at least three and usually four numeric subfields separated by dashes (-). The fields are country code, city or area code, exchange code, and number. The various parts of the phone number are frequently used to derive cost and routing information, as well as what number is to be dialed. A typical example of the data in a phone number field is 1-800-555-1212, corresponding to country 1 (USA), area 800 (inbound WATS), exchange 555, and number 1212. Alternatively, this field may contain the notation "-Unpublished-" in the case of a private node. In this case, the keyword "Pvt" must appear on the line. @ENDNODE 3.8 @NODE 3.9 "Field 7: Baud rate " @{B}Field 7: Baud rate@{UB} This field contains one of the values: 300, 1200, 2400, 9600, 19200, or 38400, and defines the maximum baud rate supported by the node. @ENDNODE 3.9 @NODE 3.10 "Field 8: Flags " @{B}Field 8: Flags@{UB} This optional field contains data about the specific operation of the node, such as file requests, modem protocol supported, etc. Any text following the seventh comma on a data line is taken collectively to be the flags field. The required format is zero or more subfields, separated by commas. Each subfield consists of a flag, possibly followed by a value. The following flags define special operating conditions: Flag Meaning CM Node accepts mail 24 hours a day MO Node does not accept human callers The following flags define modem protocols supported: Flag Meaning V21 CCITT V21 300 bps full duplex V22 CCITT V22 1200 bps full duplex V29 CCITT V29 9600 bps half duplex V32 CCITT V32 9600 bps full duplex V33 CCITT V33 V34 CCITT V34 H96 Hayes V9600 HST USR Courier HST MAX Microcom AX/96xx series PEP Packet Ensemble Protocol NOTE: Many V22 modems also support Bell 212A. If no modem flag is given, Bell 212A is assumed for 1200 bps systems, CCITT V22bis is assumed for 2400 bps systems. The following flags define type of error correction available. A separate error correction flag should not be used when the error correction type can be determined by the modem flag. For instance, a modem flag of HST implies MNP. Flag Meaning MNP Microcom Networking Protocol error correction V42 LAP-M error correction w/fallback to MNP The following flags define the type(s) of compression of mail packets supported. Flag Meaning MN No compression supported NOTE: The only compression method standard in FidoNet is archiving, using the standard SEA ARC format, with archive names defined by the specification for ARCMail 0.6. The absence of the MN flag indicates that ARCMail 0.6 compression is supported by this node. The following flags indicate the types of file/update requests supported. Flag Meaning XA Bark and WaZOO file/update requests XB Bark file/update requests, WaZOO file requests XP Bark file/update requests XR Bark and WaZOO file requests XW WaZOO file requests XX WaZOO file/update requests The following flag defines gateways to other domains (networks). Flag Meaning Gx..x Gateway to domain 'x..x', where 'x..x` is a string of alphanumeric characters. Valid values for 'x..x' are assigned by the FidoNet International Coordinator. Current valid values of 'x..x' may be found in the notes at the end of the FidoNet nodelist. The following flags define the dedicated mail periods supported. They have the form "#nn" or !nn where nn is the UTC hour the mail period begins, # indicates Bell 212A compatibility, and ! indicates incompatibility with Bell 212A. Flag Meaning #02 Zone 2 mail hour (02:30 - 03:30 UTC) #09 Zone 1 mail hour (09:00 - 10:00 UTC) #18 Zone 3 mail hour (18:00 - 19:00 UTC) NOTE: When applicable, the mail period flags may be strung together with no intervening commas, eg. "#02#09". Only mail hours other than that standard within a node's zone should be given. Since observance of mail hour within one's zone is mandatory, it should not be indicated. The following flag defines user-specific values. If present, this flag MUST be the last flag present in a nodelist entry. Flag Meaning Ux..x A user-specified string, which may contain any alphanumeric character except blanks. This string may contain one to thirty-two characters of information that may be used to add user-defined data to a specific nodelist entry. The FidoNet International Coordinator (IC) is the ultimate authority over what appears in the FidoNet nodelist. The IC may temporarily make changes or additions to the flags as defined in this document. The IC will then consult with The FidoNet Technical Standardisation Commitee (FTSC) over the changes needed to FTSC documents to reflect these temporary changes. @ENDNODE 3.10 @NODE 3.11 "Example Nodelist Entries " 3.3. @{B}Example Nodelist Entries@{UB} The following are examples of nodelist data lines: Host,102,SOCALNET,Los_Angeles_CA,Richard_Martz, 1-213-874-9484,2400,XP ,101,Rainbow_Data,Culver_City_CA,Don_Brauns, 1-213-204-2996,2400, @ENDNODE 3.11 @NODE 3.12 "An Example Fake Pointnet " 3.4. @{B}An Example Fake Pointnet@{UB} This is an example of a private pointnet: ;A Private Secret Traplist for the other day -- fake crc 0 : 0 ;A Zone,2,-> Region,31,-> ; the 2D part Host,3160,The_Mad_Net,Vienna_Austria,Maximilian_Hantsch, 43-1-5567854,9600,MO,HST,XW Pvt,1,TrapDoor_Development,Vienna_Austria,Maximilian_Hantsch, -Unpublished-,9600,MO,HST,XW Pvt,2,Yet_Unnamed,Moedling_Austria,Michael_Brunner, -Unpublished-,9600,MO,HST,XW Pvt,3,The_Mad_Point,Weissenbach_Austria,Thomas_Hantsch, -Unpublished-,9600,MO,HST,XW ; the 4D part Host,310,-> ,6,The_Mad_Net,Vienna_Austria,Maximilian_Hantsch, 43-1-5567854,9600,MO,HST,XW Point,1,TrapDoor_Development,Vienna_Austria,Maximilian_Hantsch, -Unpublished-,9600,MO,HST,XW Point,2,Yet_Unnamed,Moedling_Austria,Michael_Brunner, -Unpublished-,9600,MO,HST,XW Point,3,The_Mad_Point,Weissenbach_Austria,Thomas_Hantsch, -Unpublished-,9600,MO,HST,XW ; ; An additional example: ; I am going to override the nodelist entry for 2:310/11, ; because it has changed recently. ; For this feature to work, be sure to list this private ; nodelist _before_ the main nodelist in your TrapList ; configuration file. ; Host,310,-> ,11,Deep_Node,Vienna_Austria,Felix_Kasza, 43-1-123-4567,1200,CM,V21 ; @ENDNODE 3.12 @NODE 4 "The Nodediff " 4. @{B}The Nodediff@{UB} @ENDNODE 4 @NODE 4.1 "General Information " 4.1. @{B}General Information@{UB} With more than ten thousand nodes as of this date ('91), the nodelist, even in archive form, is a substantial document (or file). Since distribution is via electronic file transfer, this file is NOT routinely distributed. Instead, when a new nodelist is prepared, it is compared with the previous week's nodelist, and a file containing only the differences is created and distributed. The distribution file, called NODEDIFF.nnn, where nnn is the day-of-year of publication, is actually an editing script which will transform the previous week's nodelist into the current nodelist. For actual distribution, NODEDIFF.nnn is packed into an archive file named NODEDIFF.Ann, where nn are the last two digits of day-of-year. You can skip the next chapter if you want. It is just here to supply you with additional background information about the format of the nodediff. @ENDNODE 4.1 @NODE 4.2 "Details " 4.2. @{B}Details@{UB} The first line of NODEDIFF.nnn is an exact copy of the first line of LAST WEEK'S nodelist. This is used as a first-level confidence check to ensure that the right file is being edited. The second and subsequent lines are editing commands and editing data. There are three editing commands and all have the same format: <command><number> <command> is a 1-letter command; A, C, or D. <number> is a decimal number greater than zero, and defines the number of lines to be operated on by the command. Each command appears on a line by itself. The commands have the following meanings: Ann - Add the following nn lines to the output file. Cnn - Copy nn unchanged lines from the input to the output file. Dnn - Delete (or skip) nn lines from the input file. The following illustrates how the first few lines of NODEDIFF.213 might look: ;A Friday, July 25, 1986 -- Day number 206 : 27712 D2 A2 ;A Friday, August 1, 1986 -- Day number 213 : 05060 ;A C5 This fragment illustrates all three editing commands. The first line is the first line from NODELIST.206. The next line says "delete the first two lines" from NODELIST.206. These are the identification line and the line following it. The next command says "add the next two lines" to NODELIST.213. The two data lines are followed by a command which says "copy five unchanged lines" from NODELIST.206 to NODELIST.213. Notice that the first line added will ALWAYS contain the new nodelist's CRC. Since only the differences will be distributed, it is important to ensure the accuracy of the newly created nodelist. This is the function of the CRC mentioned above. If the CRC in the Nodediff and the calculated CRC do not equal, one of the input files has been corrupted. If they are the same, the probability is very high (but not 100%) that the output file is accurate. @ENDNODE 4.2 @NODE 5 "Configuration " 5. @{B}Configuration@{UB} @{"Configuration" link 5} statements are given to TrapList by means of a configuration file. This file can either be called "TrapList.cfg", or, more generally, "fido.cfg". The configuration file will be first searched for in the current directory, then in "MAIL:". You can override this search sequence and specify your own alternate configuration file using the CONFIG commandline keyword, such as in TrapList CONFIG DEVS:traplist-configuration You can also specify the path and filename of the configuration file by means of an environment variable FCFGPATH. For example, setenv FCFGPATH DH0:Configs/Fido-Config.txt For detailed information on the global configuration file "fido.cfg", please consult additional documentation about the general structure of this file, how several applications can share configuration keywords, etc. Please note that the configuration statements are neither case sensitive nor do they have to appear in any specific order. Only one statement should appear on a single line. @ENDNODE 5 @NODE 6 "@{"Configuration" link 5} Statements " 6. @{B}Configuration Statements@{UB} @ENDNODE 6 @NODE 6.1 "BUFFERSIZE buffersize " 6.1. @{B}BUFFERSIZE buffersize@{UB} TrapList will buffer all file i/o to speed up the nodelist processing. This statement allows you to specify the amount of memory TrapList will use for each of its buffers. This value should be given in bytes. TrapList will always use at least buffers of 4096 bytes, even if a lower value is specified with BUFFERSIZE. The default is 32768 bytes. Example: BufferSize 65536 @ENDNODE 6.1 @NODE 6.2 "(NO)CHECKCRC " 6.2. @{B}(NO)CHECKCRC@{UB} When this configuration statement is used, TrapList will check the CRC of the freshly generated nodelist when applying a diff. If the CRC is not what it is supposed to be, TrapList will issue a warning, delete the new nodelist and continue to use the old one instead. That way, you can always be sure to have a valid nodelist. Example: CheckCRC @ENDNODE 6.2 @NODE 6.3 "COMMENT comment-identifier " 6.3. @{B}COMMENT comment-identifier@{UB} When the nodelist is parsed, and TrapList encounters a comment line, it will compare the comment-identifier (";S" for Sysop comments, ";U" for User comments, a.s.o.) with the identifiers you specified here. If it finds the identifier listed, and the REPORT keyword is in effect, the comment line will be written to the reportfile (see REPORT). Examples: Comment SU ; list "Sysop" and "User" comments Comment A ; list "All" comments Comment SUFA ; list all comments @ENDNODE 6.3 @NODE 6.4 "COST costs dial-prefix [dial-prefix...] " 6.4. @{B}COST costs dial-prefix [dial-prefix...]@{UB} Specify phone costs per minute for a group of telephone numbers. When TrapDoor reads a phonenumber from the nodelist, and you have defined a certain cost, TrapDoor will be able to show you the total cost of your call. If you specify minus one ("-1") as the costs for a number, TrapDoor will never call there. You can use this to prevent TrapDoor from calling "-Unpublished-" numbers. See the example configuration file for more details. You can specify multiple dial prefixes for a single cost entry. Examples: Cost 67 "43-1-" ; 0.67 ATS/min for local calls Cost 1333 "30-" "44-" ; Greece and UK cost the same Cost -1 "-" ; -Unpublished- = undialable Cost 2800 "" ; 28 ATS/min for all others @ENDNODE 6.4 @NODE 6.5 "(NO)DELOLDDIFFS " 6.5. @{B}(NO)DELOLDDIFFS@{UB} This tells TrapList to delete old nodediffs when they have been applied successfully. Example: DelOldDiffs @ENDNODE 6.5 @NODE 6.6 "(NO)DELOLDLISTS " 6.6. @{B}(NO)DELOLDLISTS@{UB} This tells TrapList to delete old nodelists when they have been "diff'd" into a new one. Example: DelOldLists @ENDNODE 6.6 @NODE 6.7 "DIAL original-string replacement-string " 6.7. @{B}DIAL original-string replacement-string@{UB} Specify a dial translation for phone numbers. When a phonenumber is read in from the nodelist by TrapDoor, these dial translations will be applied. If the beginning of the telephone number matches the original-string, it will be replaced by the replacement-string. Dial translations will be searched from first to last, and only the first match will be applied. After the first match, no further translation will be done. Examples: Dial "43-1-" "" ; strip country and exchange code ; for local calls Dial "43-" "0" ; replace country code with "0" ; for the rest of Austria Dial "-" "-" ; do not translate "-Unpublished-" Dial "" "00" ; add "00" to other numbers @ENDNODE 6.7 @NODE 6.8 "(NO)GENNEWSTYLE " 6.8. @{B}(NO)GENNEWSTYLE@{UB} @ENDNODE 6.8 @NODE 6.9 "(NO)GENOLDSTYLE " 6.9. @{B}(NO)GENOLDSTYLE@{UB} These two keywords are now obsolete and are no longer supported. Remove them from your config files. @ENDNODE 6.9 @NODE 6.10 "NODELIST nodelistname [DIFF diffname] " 6.10. @{B}NODELIST nodelistname [DIFF diffname]@{UB} This specifies the name of a nodelist file to look for. TrapList will append day numbers to the filename and search for the nodelist with the highest number. If the DIFF keyword was specified also, TrapList will try to locate a matching nodediff file and apply it to the nodelist. If a node is listed in more than one nodelist (for example, in the main FidoNet nodelist and in a private pointnet), the data from the first nodelist will be taken (in the order that the nodelists are listed in your configuration file). This allows you to override data for a node in the nodelist; just list the system in your private nodelist and specify the name of the private list before the main nodelist in the configuration file for TrapList. Note: Nodelists will be scanned in @{B}reverse@{UB} order than specified. This is not a fault. Examples: Nodelist "NODELIST" DIFF "NODEDIFF" Nodelist "POINTNET" @ENDNODE 6.10 @NODE 6.11 "NODELISTPATH path " 6.11. @{B}NODELISTPATH path@{UB} This (required) configuration statement tells TrapList where to find Nodelist and Nodediff files and where to put its index files. It is not necessary to terminate the path specification with a slash. Example: NodeListPath "Nodelist:" @ENDNODE 6.11 @NODE 6.12 "PASSWORD password node [node...] " 6.12. @{B}PASSWORD password node [node...]@{UB} Associate a password with a certain nodenumber. TrapList will put the password into the extra file and TrapDoor will then automatically use that password when it establishes communication with that node. Also, on incoming calls, TrapDoor will check the password for the calling node and hang up if incorrect. If you set up a password with a node that is also listed as a Zone Coordinator, Regional Coordinator, Net Coordinator, or Hub Coordinator, make sure you specify all of the node's addresses, or you might experience strange problems when calling one of the Coordinator's addresses. Note that you may specify multiple node addresses for a single password, especially for that purpose. There also is a special password for nodes you want to disable from connecting to your system, "--NONE--". You may want to use this keyword for your own addresses, thus forbidding any caller from (fraudulently) using your address. TrapDoor will immediately disconnect if anyone calls you with the given address. Examples: Password "secret" 2:310/6 2:3160/0 Password "geheim" 2:310/3 @ENDNODE 6.12 @NODE 6.13 "(NO)QUIET " 6.13. @{B}(NO)QUIET@{UB} Suppress warnings about nodes defined more than once. You can use this to prevent TrapList from displaying "Duplicate Entry for Node..." when you process several nodelists which contain a few redundant node definitions (e.g. a pointnet or a region nodelist together with the main fidonet nodelist). Note: The "Duplicate Entry" message will still be written to the reportfile. Examples: Quiet NoQuiet @ENDNODE 6.13 @NODE 6.14 "REPORT reportfile " 6.14. @{B}REPORT reportfile@{UB} Write some statistics about the processed nodelists into the given reportfile in addition to displaying them on stdout (the shell window). In conjunction with other utilities, such as Electric Herald, this can be used to automatically send the sysop information about freshly compiled nodelists and similar things. If you use the COMMENT keyword, selected comment lines from the nodelist will also be sent to the reportfile. Example: Report "Mail:Report.txt" @ENDNODE 6.14 @NODE 6.15 "ZONE zone " 6.15. @{B}ZONE zone@{UB} This is the default zone that TrapList should use for nodelists that do not contain a Zone keyword, i.e. Pointnets and similar private lists. Example: Zone 2 @ENDNODE 6.15 @NODE 7 "Example @{"Configuration" link 5} File " 7. @{B}Example @{"Configuration" link 5} File@{UB} ; ********************************************** ; *** Sample TrapList configuration file *** ; ********************************************** Zone 2 ; default zone number NodeListPath "Mail:Nodelist" ; my nodelist directory BufferSize 65536 ; use 64k buffer for file i/o NodeList "NODELIST" Diff "NODEDIFF" ; nodelist & -diff NodeList "POINTNET" ; private pointnet CheckCRC ; make sure that nodelists are okay DelOldLists ; delete the old nodelists when diff'ed DelOldDiffs ; delete the old nodediffs when processed Report t:TL.report ; put reports into this file Comment SA ; write Sysop and All comments ; to the report file ; Passwords. ; note that you can specify several nodenumbers that ; all use the same password. this is for AKA addresses. Password 123456 2:310/3.0 Password --NONE-- 2:310/6.0 2:3160/0.0 Password pwd 2:310/11.32 2:3210/32.0 Password guess 2:310/11 2:2/3 2:2/4 2:2/5 27:27/1 ; phone number translations. Dial "43-1-" "" ; local calls Dial "43-" "0" ; within Austria Dial "49-" "060-" ; use shortcut to Germany Dial "-" "-" ; leave "-Unpublished-" as is Dial "" "00" ; add "00" to other entries ; cost tables (in Austrian Groschen) Cost 67 "43-1-" ; local calls in Vienna Cost 400 "43-2280-" ; somewhere in Austria Cost 1330 "213-" ; Algeria Cost 867 "49-" ; FRG (Germany) Cost 2800 "1-907-" ; Alaska Cost 1800 "1-" ; USA, Kanada Cost -1 "-" ; forbid calls to -Unpublished- Cost 2800 "" ; Rest of the World @ENDNODE 7 @NODE 8 "Processing The Lists " 8. @{B}Processing The Lists@{UB} To process the latest nodelist and nodediff, simply call TrapList with "TrapList". Easy, isn't it? You should get an output quite like this: TrapList 1.35 -- The TrapDoor Nodelist Processor Copyright 1990, 1991 by Martin J. Laubach and Maximilian Hantsch All rights reserved Applying NODEDIFF.054 to NODELIST.047 Parsing NODELIST.054 Zone 2 Europe Zone 1 North_America Zone 3 Oceania Zone 4 America_Latina Zone 5 AFRICA Sorting Processing Writing Total Nodes Processed = 7360 Bad Nodes = 0 Unique Nodes = 7360 Nodes Deleted (Down) = 119 Points = 0 ------------------------------------- Zone Coordinators Listed = 5 Regional Coordinators Listed = 38 Network Coordinators Listed = 300 Hub Coordinators Listed = 405 ===================================== Diff'ing = 0:27 Parsing = 0:19 Sorting = 0:06 Processing = 0:02 Writing = 0:05 ------------------------------------- Total time needed = 0:59 @ENDNODE 8 @NODE 9 "Return Values " 9. @{B}Return Values@{UB} If everything went all right, and the index and extra files were both correctly produced and renamed, TrapList will return zero (0). The nodelist index and extra files will be automatically updated through traplist.library. Programs which access the nodelist via traplist.library will automatically use the fresh index; there is no need to quit and restart such programs. If updating the index file fails (due to some disk i/o error, for example) TrapList will return 10. On any other error, TrapList will return 20. Note that in case of an error, the old index and extra files will be left unchanged, so TrapDoor will still be able to access a valid nodelist, even though it will not be the latest one in such a case. @ENDNODE 9 @NODE 10 "Past And Future " 10. @{B}Past And Future@{UB} TrapList was originally intended as a stopgap measure while waiting for J rgen Hermann's final release version of CList. Since a lack of a working CList also prevented us from shipping a node-able TrapDoor, we had to do something about it -- that was how TrapList started. Since the first release (which came together with TrapDoor 1.50) quite a few things have changed. Not only have cost entries, nodelist CRC checking and passwords longer than 6 characters been implemented, but also the whole nodelist concept has been completely reworked: TrapList now uses a new index and extra file format and comes with a shared Amiga library to access these files. Other products (such as BBSs or mail tossers) can make use of traplist.library to obtain data from the TrapList-indexed nodelist. On the other hand, the project of also generating a version 6 nodelist format has been dropped. TrapList and the related shared library offer so many advantages over the aged version 6 format; we hope that most new programs will support "traplist.library". "traplist.library" offers another entirely new feature: the extra file stores arbitrary data and associates it with a node address. Third party programs as well as TrapDoor can use this "extra database" to store their node-specific data. For example, TrapDoor now uses the extra file to hold accounting information (how many times that node was called, how many times it was busy, etc.) as well as the session password and "special config" commandlines. Other uses (to be implemented in other programs) could be: Packer/Unpacker to be used for echomail to that node, Areafix password, and many more. "traplist.library" now also allows programs to scan the nodelist (to produce a list of nodes in your own net, for example). In addition to that, it also has an ARexx interface to allow easy usage from ARexx programs. If you wish to know more about the programming interface of "traplist.library", please refer to the documentation "tl_lib.Man". @ENDNODE 10 @NODE 11 "Registration " 11. @{B}Registration@{UB} TrapList is a copyrighted product that has been made available to you as part of the TrapDoor project and thus, as Shareware. All terms of the licence agreement for TrapDoor also are true for TrapList except as otherwise stated herein. Please consult the documentation for TrapDoor for the complete licence. If you register TrapDoor, you automatically also gain a licence to use TrapList. Should you decide that you wish to use TrapList on its own, without registering TrapDoor, a ShareWare registration fee of ATS 200,- is suggested. By cooperating with this concept you help to ensure continued development of this product. Site licence information for commercial and government use can be obtained directly from the authors. No person(s) or businesses other than the authors are authorized to accept any registration or distribution fees in any form whatsoever. The only people who will be acknowledged as registered users are those who have either registered TrapDoor or sent ATS 200,- to: TrapDoor Development Maximilian Hantsch Matzleinsdorfer Platz 3-4/3/10 A-1050 Wien Austria / Europe @ENDNODE 11 @NODE 12 "Politics " 12. @{B}Politics@{UB} @ENDNODE 12 @NODE 12.1 "Distribution " 12.1. @{B}Distribution@{UB} TrapList may be redistributed with two restrictions. First, it must be distributed as part of the TrapDoor package. Second, the distributor may only charge a fee up to the costs of obtaining a public domain diskette from Fred Fish for the complete package. The distributor agrees to cease distributing the programs and data involved if requested to do so by the author. The distributor may only distribute an unmodified copy of the original TrapDoor package, with all the supplied documentation and copyright notices intact and without any files being added, changed or omitted. @ENDNODE 12.1 @NODE 12.2 "Support " 12.2. @{B}Support@{UB} If you have any suggestions, bug reports etc., feel free to contact the authors of TrapList/TrapDoor at the above address. Additionally, you can reach us at: Maximilian Hantsch Martin Laubach Fido: 2:310/6 Fido: 2:310/3.14 Uucp: max@madvie.co.at Uucp: mjl@alison.co.at Also, there is a FidoNet Echomail conference called TRAPDOOR, which should be available at major backbones. This conference is in English and intended for the users of TrapDoor and, of course, TrapList as well. There, you can freely exchange your experience with these programs, discuss future enhancements you would like to see etc. Both authors will participate in the conference and try to assist you. @ENDNODE 12.2 @NODE 12.3 "No Warranty " 12.3. @{B}No Warranty@{UB} THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. @ENDNODE 12.3 @NODE 12.4 "Disclaimer " 12.4. @{B}Disclaimer@{UB} No warranty, either express or implied, is made with respect to the fitness or merchantability of TrapList. Maximilian Hantsch and Martin Laubach (referred to as "the authors"), reserve the right to not develop any future versions of TrapList. The authors will try to make a good faith attempt at correcting any problems if any are discovered, but are in no way required, nor bound to correct them. The authors neither assume or accept any responsibility for the use or misuse of this program. They also will not be held liable for damages or any compensation beyond the original registration fee due to loss of profit or any other damages arising out of the use, or inability to use this program. Neither Maximilian Hantsch nor Martin Laubach will be liable for any damage arising from the failure of this program to perform as described, or any destruction of other programs or data residing on a system attempting to run the program. While we know of no damaging errors, the user of this program uses it at his or her own risk. @ENDNODE 12.4 @NODE 13 "Acknowledgements " 13. @{B}Acknowledgements@{UB} The following names are either trademarks or the efforts of the person and/or company listed: Amiga and AmigaDOS are trademarks of Commodore-Amiga, Inc. ARC by System Enhancement Associates. Chameleon Editor and CList by J rgen Hermann. Fido and FidoNet are trademarks of Tom Jennings, Fido Software. Licence Agreement inspired by Jack Radigan and the GNU General Public License. Many Thanks to our Alpha and Beta testing crew, including, but not limited to: Andreas Dolleschal, Arnout Grootveld, Manfred Sch dler, Ren Hexel, Roger Nordin, Telepro Technologies, Tony Miller ... Nodelist and Nodediff Information from FTS-0005. Special Thanks to all our Registered TrapDoor Users. TrapDoor by Maximilian Hantsch and Martin Laubach. TrapList by Martin Laubach and Maximilian Hantsch. "This is the end. Please log off." @ENDNODE 13 @NODE index Index @{"(NO)CHECKCRC 6.2. " link 6.2} @{"(NO)DELOLDDIFFS 6.5. " link 6.5} @{"(NO)DELOLDLISTS 6.6. " link 6.6} @{"(NO)GENNEWSTYLE 6.8. " link 6.8} @{"(NO)GENOLDSTYLE 6.9. " link 6.9} @{"(NO)QUIET 6.13. " link 6.13} @{"Acknowledgements 13. " link 13} @{"An Example Fake Pointnet 3.12. " link 3.12} @{"Basics 2. " link 2} @{"BUFFERSIZE buffersize 6.1. " link 6.1} @{"CHECKCRC 6.2. " link 6.2} @{"COMMENT comment-identifier 6.3. " link 6.3} @{"Configuration 5. " link 5} @{"Configuration Statements 6. " link 6} @{"COST costs dial-prefix [dial-prefix...] 6.4. " link 6.4} @{"DELOLDDIFFS 6.5. " link 6.5} @{"DELOLDLISTS 6.6. " link 6.6} @{"Details 3.2. " link 3.2} @{"Details 4.2. " link 4.2} @{"DIAL original-string replacement-string 6.7. " link 6.7} @{"Disclaimer 12.4. " link 12.4} @{"Distribution 12.1. " link 12.1} @{"Example Configuration File 7. " link 7} @{"Example Nodelist Entries 3.11. " link 3.11} @{"Field 1: Keyword " link 3.3} @{"Field 2: Zone/Region/Net/Node number " link 3.4} @{"Field 3: Node name " link 3.5} @{"Field 4: Location " link 3.6} @{"Field 5: Sysop name " link 3.7} @{"Field 6: Phone number " link 3.8} @{"Field 7: Baud rate " link 3.9} @{"Field 8: Flags " link 3.10} @{"General Information 3.1. " link 3.1} @{"General Information 4.1. " link 4.1} @{"GENNEWSTYLE 6.8. " link 6.8} @{"GENOLDSTYLE 6.9. " link 6.9} @{"Introduction 1. " link 1} @{"No Warranty 12.3. " link 12.3} @{"NOCHECKCRC 6.2. " link 6.2} @{"NODELIST nodelistname [DIFF diffname] 6.10. " link 6.10} @{"NODELISTPATH path 6.11. " link 6.11} @{"NODELOLDDIFFS 6.5. " link 6.5} @{"NODELOLDLISTS 6.6. " link 6.6} @{"NOGENNEWSTYLE 6.8. " link 6.8} @{"NOGENOLDSTYLE 6.9. " link 6.9} @{"NOQUIET 6.13. " link 6.13} @{"PASSWORD password node [node...] 6.12. " link 6.12} @{"Past And Future 10. " link 10} @{"Politics 12. " link 12} @{"Processing The Lists 8. " link 8} @{"QUIET 6.13. " link 6.13} @{"Registration 11. " link 11} @{"REPORT reportfile 6.14. " link 6.14} @{"Return Values 9. " link 9} @{"Support 12.2. " link 12.2} @{"The Nodediff 4. " link 4} @{"The Nodelist 3. " link 3} @{"ZONE zone 6.15. " link 6.15} @ENDNODE index