home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
MPC Wizard 3.0
/
WIZARD3_0.ISO
/
drivers
/
sound
/
az_b16nx
/
readme.txt
< prev
next >
Wrap
Text File
|
1994-09-18
|
3KB
|
69 lines
Aztech Labs, Inc. can be contacted at (510) 623-8988.
Additional Information
Sound Galaxy Basic 16 Sound Card
This file contains additional information and changes about the
various software that was not available at printing time.
Installing the Windows Audio Drivers
====================================
The Sound Galaxy Basic 16 package includes several Windows 3.1 audio
drivers. These drivers include:
1. Aztech Sound Galaxy Basic 16 Auxiliary Driver
2. Aztech Sound Galaxy Basic 16 FM Synthesis Driver
3. Aztech Sound Galaxy Basic 16 Wave/MIDI Driver
4. Sound Galaxy Basic 16 WSS Compatible Driver (undocumented)
The first three Windows drivers HAVE been automatically installed for
you (by default) during the installation of your sound card's software.
Refer to the user's manual for more information on these drivers (see
Appendix D.2 - Windows Audio Drivers).
However, if you are using your Sound Galaxy Basic 16 sound card to run
Microsoft Windows Sound System (WSS) software (Version 2.0), you MUST
install the last driver, Sound Galaxy Basic 16 WSS Compatible Driver,
shown above.
The Sound Galaxy Basic 16 WSS Compatible Driver allows you to playback
WAV files, and control the relative volume of the audio source between
an auxiliary audio device (e.g., CD-ROM drive or microphone) and your
Microsoft WSS applications. In addition, this driver lets you perform
synthesizing operation on MIDI files using frequency modulation. As a
result, you can generate synthesized music.
Note that you need to remove the first three drivers prior to installing
the Sound Galaxy Basic 16 WSS Compatible Driver. For more information on
removing and installing audio drivers in Windows, refer to your Windows
User's Guide.
After you have installed the Sound Galaxy Basic 16 WSS Compatible Driver,
you may modify its MIDI Mapper configuration file:
1. Copy the Sound Galaxy Basic 16 WSS Compatible Driver, MIDIMAP.WSS,
to the \WINDOWS\SYSTEM sub-directory.
2. You may wish to make a backup copy of the ORIGNAL MIDI Mapper
configuration file, MIDIMAP.CFG.
3. Rename the MIDIMAP.WSS to MIDIMAP.CFG.
If you wish to re-install the original Windows drivers, you must first
remove the following statement:
Device=Vsgb16ss.386
from the [386Enh] section in SYSTEM.INI (C:\WINDOWS directory).
--- End of File ---