home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
MPC Wizard 3.0
/
WIZARD3_0.ISO
/
drivers
/
sound
/
laserpro
/
readme
< prev
Wrap
Text File
|
1994-09-18
|
5KB
|
125 lines
Laser Digital Inc. can be reached at 408-737-2666.
Readme File
Before you proceed, please read carefully the Readme file in
Media Concept Pro Program Diskette. Last minute changes or
corrections, if any, not contained in this manual at the time of
publication may be found in this file. To read it, insert the
diskette in drive A, type
type A:\readme
at DOS command line then press Enter.
Introduction
A hard disk is required for Media Concept Pro software
installation. The installation is done by executing the hard disk
installation program, INSTALL.EXE. The files on the distribution
diskettes are compressed. INSTALL.EXE will expand them into your
hard disk.
INSTALL.EXE installs the Media Concept Pro software under the
directory, \MCPRO or which you specified. Several subdirectories
are automatically created under this directory.
To begin the installation, follow these steps:
(Assuming you are using floppy drive A and hard disk drive C)
1. Place the distribution diskette in Drive A and change to
Drive A:
2. Type INSTALL.EXE and press Enter key.
3. Follow on screen instructions to proceed. Refer to User's
manual if you encounter any problem.
Package Contains
The Media Concept Pro software package contains:
- One 3.5" 1.2MB diskette
Media Concept Pro provides many useful software programs for your
applications in sound and music. The following are files contained
in the 3.5" diskettes:
INSTALL.DAT
DISK.ID
MCPCD.ALL - Compressed file containing:
MCPCDP.EXE - CD-ROM application program
MCPCDR.SYS - CD-ROM DOS device driver
MCPWIN.ALL - Compressed file containing:
MCPMIXW.EXE - Windows 3.1 Mixer controller
MCPMUS.DRV - Windows 3.1 MIDI music Device
MCPMUS.386 - Windows 3.1 Virtual Media Concept Pro
Device Driver for MIDI music
MCPDEV.DRV - Windows 3.1 WAVE and MIDI port device
driver.
VMCXD.386 - Windows 3.1 Virtual Media Concept Pro
Device Driver for WAVE and MIDI port
OEMSETUP.INF - Windows 3.1 setup information file for
driver installation
MIDIMAP.CFG - MIDI maps configuration file
WINSETUP.EXE - Program to setup Windows 3.1 device
drivers and Windows application
MCPJUKE.ALL - Compressed file containing:
JUKEBOX.EXE - Jukebox for playing MIDI files
INSTALL.EXE - Installation program
MCPRO.ALL - Compressed file containing:
MCPTEST.EXE - Media Concept Pro card test program
MCPSENV.EXE - Environment setting program
MCPPLAYV.EXE - Voice file player
MCPPLAYW.EXE - Wave file player
MCPRECV.EXE - Voice recorder for Voice File format
MCPRECW.EXE - Voice recorder for Wave File format
VOC2WAV.EXE - Voice to wave format converter
WAV2VOC.EXE - Wave to voice format converter
MCPSVOL.EXE - Volume levels setup program
MCP-MIX.EXE - Mixer controller
PLAYMIDI.EXE - MIDI file player
MCPTEST.VOC - Demonstration voice data file
MC.CFG - Media Concept Pro configuration file
README - This text
Backup Copy
It is always a good idea to make backup copy of your original
software. Make a backup copy of your Media Concept Pro Program
Diskette now and store your original diskette in a safe place.
System Requirements
To run these programs, you need to have the following hardware
and software:
Hardware
-IBM PC/AT+, 386, 486 or compatible computer with the
following:
- One or more 3.5" floppy drive
- Media Concept Pro card
- MGA, CGA, EGA or VGA, VGA recommended
- 40MB Hard disk with at least 2MB of free space
- At least 1MB of RAM (conventional & extended), 2MB
recommended
- Optional Microsoft or compatible serial mouse recommended
- 80386 or above recommended
- Microphone, if you wish to record voice
- Speakers
Software
- MS-DOS 3.3 or later
- Device driver for your mouse if you want to use mouse