Multi-CD Magazin 1993 January/MultiCDMagazin0193_2ndEd.bin/treiber/disk01.exe/INSTALL.DAT

Text File | 1993-07-21 | 55KB | 1,409 lines

@DefineProject
 @Name     = "SPEA V7-MIRAGE Superdisk"
 @Version  = "Release 0793.5"
 @OutDrive = C
 @Subdir   = "\\SPEA\\GDC"
 @Requires @HardDisk
@EndProject

@DefineVars
 @QString @Board = "V7-MIRAGE"
 @QString @Checkfile = "S3TEST.EXE"
 @QString @t151 = "  @Name    @Version"
 @QString @d8 = "\n\n\n\n\n\n\n\n"
/* SCRIPT LANGUAGE CONTROL: */
 @If(@Language==1) @Integer @L = 1 @ElseIf (@Language==2) @Integer @L = 2 @ElseIf (@Language==3) @Integer @L = 3 @ElseIf (@Language==4) @Integer @L = 4 @Endif
 @Drive @acad12drv = C
 @Dir @acad12dir = "\\ACAD"
 @Drive @ckdrv = C
 @Dir @ckdir = "\\CADKEY"
 @Drive @cvandrv = C
 @Dir @cvandir = "\\CADVANCE"
 @Drive @datadrv = C
 @Dir @datadir = "\\MTEC"
 @Drive @gendrv = C
 @Dir @gendir = "\\CADD6"
 @Drive @ustardrv = C
 @Dir @ustardir = "\\USTATION"
 @Drive @ustapdrv = C
 @Dir @ustapdir = "\\USTATION"
 @Drive @lotusdrv = C
 @Dir @lotusdir = "\\123"
 @Drive @symdrv = C
 @Dir @symdir = "\\SYM"
 @Drive @worddrv = C
 @Dir @worddir = "\\WORD"
 @Drive @versadrv = C
 @Dir @versa53dir = "\\VCAD53"
 @Dir @versa54dir = "\\VCAD"
 @Dir @versa386dir = "\\VCAD386"
 @Drive @wpdrv = C
 @Dir @wpdir = "\\WP"
 @Drive @os2drv = C
 @Dir @os2dir = "\\SPEAV7"
@If (@Language==1)
@QString @t011 = " Use the keys [] and [] to select a drive. Press [─┘] to continue."
@QString @t012 = " "
@QString @t021 = " Use the SPACE BAR to select YES or NO."
@QString @t022 = " Press [─┘] to continue and create this directory (if YES)"
@QString @t023 = " or to modify the last input (if NO)."
@QString @t031 = " For more information about the configuration of drivers, please refer to"
@QString @t032 = " the @Board manual or to file README at the end of this installation."
@QString @t033 = " "
@QString @t041 = " On which disk drive is"
@QString @t042 = "installed at present?"
@QString @t051 = " In which directory is"
@QString @t061 = "does not exist. Do you want to create it?"
@QString @t071 = " Installation of"
@QString @t072 = "has been prepared successfully."
@QString @t081 = " Directory"
@QString @t091 = " Which directory"
@QString @t101 = "already exists."
@QString @t102 = " Do you want to continue installing in this directory?"
@QString @t111 = " Use the SPACE BAR to select YES or NO. Press [─┘] to continue."
@QString @t121 = " On which disk drive do you want to install the \"@Board Utilities\" ?"
@QString @t131 = " For which version of"
@QString @t132 = "do you want to install @Board drivers?"
@QString @t133 = " Use the keys [] and [] to select. Press [─┘] to continue."
@QString @t141 = " On which disk drive do you want to install the @Board driver"
@QString @t142 = " and the font files for AutoCAD release 11 ?"
@QString @t143 = " In which directory do you want to install the @Board driver"
@QString @t144 = " On which disk drive do you want to install the font files"
@QString @t145 = " for AutoCAD Release 12 ?"
@QString @t146 = " In which directory do you want to install the font files"
@QString @t147 = " and the font files for AutoShade / 3DStudio ?"
@QString @t148 = " Which font size do you want to use in AutoCAD und AutoShade ?"
@QString @t152 = "  Supported applications:"
@QString @t153 = "  Prior to the installation of the @Board drivers, the corresponding"
@QString @t154 = "  applications must be already installed."
@QString @t161 = "  During installation you will be asked to specify on which disk drive and"
@QString @t162 = "  in which directory the corresponding application is installed at present"
@QString @t163 = "  (exception: AutoCAD Rel. 11)."
@QString @t164 = "  INFORMATION ON HOW TO USE YOUR KEYBOARD:"
@QString @t165 = "  If the default directory name in the entering field is correct, press"
@QString @t166 = "  the RETURN key [─┘] to continue."
@QString @t167 = "  If the application is installed in a different directory, press the"
@QString @t168 = "  BACKSPACE key [─-] and enter the right directory name. Then press [─┘]."
@QString @t169 = " "
@QString @t16a = "  If you entered a false drive/directory name :"
@QString @t16b = "  press again [─┘] to repeat the entry."
@QString @t16c = "  You can abort the installation at any time by pressing the [Esc] key."
@QString @t16d = "  Do you want to continue the @Board installation?"
@QString @t16e = "Continue"
@QString @t16f = " Finish "
@QString @t171 = "        Select the applications for which you want to install drivers."
@QString @t172 = "        ATTENTION: If this installation program is being executed for"
@QString @t173 = "                   the FIRST TIME, also select \"@Board Utilities\"."
@QString @t174 = "         Use the []  and []  keys to move the cursor up and down."
@QString @t175 = "         Use the SPACE BAR  to activate or deactivate installation of"
@QString @t176 = "         the driver at the cursor position. Press [─┘] when finished."
@QString @t177 = "            No driver was selected for installation!"
@QString @t181 = " There is EMS (Extended Memory) available on your system. Do you want"
@QString @t182 = " to make use of the EMS version of the @Board DataCAD driver?"
@QString @y = "YES "
@QString @n = "NO  "
@QString @t191 = " If you want to make use of the screen save function"
@QString @t192 = " (load screen/save screen), select the big driver version."
@QString @t193 = " If not, select the small driver version."
@QString @t194 = "Generic CADD small driver version"
@QString @t195 = "Generic CADD big driver version  "
@QString @t201 = " Please enter the directory in which you want the \"@Board Utilities\""
@QString @t202 = " to be installed. The standard name of the directory is: @SubDir"
@QString @t203 = " "
@QString @t204 = "Do you want to continue"
@QString @t205 = " installing the \"@Board Utilities\" in this directory?"
@QString @t251 = " On which disk drive did you install the \"@Board Utilities\" ?"
@QString @t252 = " In which directory did you install the \"@Board Utilities\" ?"
@QString @t253 = "does not contain the \"@Board Utilities\"."
@QString @t254 = "does not exist."
@QString @t300 = " Cannot find the \"@Board Utilities\" in directory"
@QString @t301 = " If the \"@Board Utilities\" are not installed, press [Esc]."
@QString @t310 = " The Drivers for OS/2 2.x will be installed in directory @os2drv:@os2dir."
@QString @t311 = " For more information, please refer to the file 80XOS2.DOC displayed at"
@QString @t312 = " the end of this installation."
@QString @t313 = " On which disk drive do you want to install the OS/2 2.x drivers?"
@QString @t320 = " Driver installation for WINDOWS:"
@QString @t321 = "  * Please insert disk \"Drivers for WINDOWS\" "
@QString @t322 = "  * Type: INSTALL"
@Endif
@If (@Language==2)
@QString @t011 = " Mit den Tasten [] und [] können Sie ein Laufwerk auswählen."
@QString @t012 = " Bestätigen Sie mit [─┘]."
@QString @t021 = " Wählen Sie JA oder NEIN mit der LEERTASTE."
@QString @t022 = " Drücken Sie [─┘] zur Fortsetzung (Verzeichnis wird erzeugt, wenn JA)"
@QString @t023 = " oder zur Änderung der letzten Eingabe (wenn NEIN)."
@QString @t031 = " Weitere Informationen zur Treiberkonfiguration entnehmen Sie bitte dem"
@QString @t032 = " @Board Handbuch oder der Datei README am Ende dieser Installation."
@QString @t033 = " "
@QString @t041 = " Auf welchem Laufwerk ist"
@QString @t042 = "derzeit installiert?"
@QString @t051 = " In welchem Verzeichnis ist"
@QString @t061 = "existiert nicht. Wollen Sie es erzeugen ?"
@QString @t071 = " Die Installation von"
@QString @t072 = "wurde erfolgreich vorbereitet."
@QString @t081 = " Verzeichnis"
@QString @t091 = " Welches Verzeichnis"
@QString @t101 = "existiert bereits."
@QString @t102 = " Wollen Sie die Installation in diesem Verzeichnis fortsetzen?"
@QString @t111 = " Wählen Sie JA / NEIN mit der Leertaste. Drücken Sie anschließend [─┘]."
@QString @t121 = " Auf welchem Laufwerk wollen Sie die \"@Board Utilities\" installieren?"
@QString @t131 = " Für welche Version von"
@QString @t132 = "wollen Sie @Board Treiber installieren?"
@QString @t133 = " Benutzen Sie die Tasten [] und [] zur Auswahl. Bestätigen Sie mit [─┘]."
@QString @t141 = " Auf welches Laufwerk wollen Sie den @Board Treiber und die"
@QString @t142 = " Schriftfontdateien für AutoCAD Release 11 installieren?"
@QString @t143 = " In welches Verzeichnis wollen Sie den @Board Treiber und die"
@QString @t144 = " Auf welches Laufwerk wollen Sie die Schriftfontdateien"
@QString @t145 = " für AutoCAD Release 12 installieren?"
@QString @t146 = " In welches Verzeichnis wollen Sie die Schriftfontdateien"
@QString @t147 = " Schriftfontdateien für AutoShade / 3DStudio installieren?"
@QString @t148 = " Welche Schriftfontgröße wollen Sie in AutoCAD und AutoShade nutzen?"
@QString @t152 = "  Unterstützte Anwendungen:"
@QString @t153 = "  Vor der Installation der @Board Treiber müssen die entsprechenden"
@QString @t154 = "  Anwendungen bereits installiert sein."
@QString @t161 = "  Im Verlauf der Installation werden Sie aufgefordert einzugeben, auf"
@QString @t162 = "  welchem Laufwerk und in welchem Verzeichnis die betreffende Anwendung"
@QString @t163 = "  derzeit installiert ist (Ausnahme: AutoCAD Rel.11)."
@QString @t164 = "  INFORMATION ZUR BEDIENUNG DER TASTATUR:"
@QString @t165 = "  Wenn der vorgegebene Verzeichnisname im Eingabefeld korrekt ist, drücken"
@QString @t166 = "  Sie die ENTER-Taste [─┘] zur Fortsetzung."
@QString @t167 = "  Wenn die Anwendung in einem anderen Verzeichnis installiert ist, betätigen"
@QString @t168 = "  Sie die Rückwärtstaste [─-] und geben den richtigen Verzeichnisnamen ein."
@QString @t169 = "  Drücken Sie anschließend [─┘]."
@QString @t16a = "  Wenn Sie versehentlich ein falsches Laufwerk/Verzeichnis eingegeben haben:"
@QString @t16b = "  drücken Sie nochmals [─┘], um die Eingabe zu wiederholen."
@QString @t16c = "  Ein Abbruch der Installation ist jederzeit mit der Taste [Esc] möglich."
@QString @t16d = "  Wollen Sie die @Board Installation fortsetzen ?"
@QString @t16e = "Fortsetzen"
@QString @t16f = " Beenden  "
@QString @t171 = "    Wählen Sie die Anwendungen, für die Treiber installiert werden sollen."
@QString @t172 = "    ACHTUNG:   Wenn dieses Installationsprogramm zum ERSTEN MAL ausgeführt"
@QString @t173 = "               wird, wählen Sie zusätzlich \"@Board Utilities\"."
@QString @t174 = "       Mit den Tasten [] und [] können Sie den Auswahlbalken bewegen."
@QString @t175 = "       Mit der LEERTASTE können Sie den invers dargestellten Treiber"
@QString @t176 = "       zur Installation aktivieren/deaktivieren. Fortsetzung mit [─┘]."
@QString @t177 = "            Es wurden keine Treiber zur Installation ausgewählt!"
@QString @t181 = " Sie haben EMS (Extended Memory) in Ihrem System verfügbar."
@QString @t182 = " Wollen Sie die EMS-Version des @Board DataCAD Treibers nutzen?"
@QString @y = " JA "
@QString @n = "NEIN"
@QString @t191 = " Wenn Sie die screen save - Funktion (Bildschirm laden bzw. speichern)"
@QString @t192 = " nutzen wollen, wählen Sie den großen Treiber."
@QString @t193 = " Ansonsten wählen Sie den kleinen Treiber."
@QString @t194 = "Generic CADD kleiner Treiber"
@QString @t195 = "Generic CADD großer Treiber "
@QString @t201 = "      Bitte geben Sie das Verzeichnis an, in dem die"
@QString @t202 = "      \"@Board Utilities\" installiert werden sollen."
@QString @t203 = "      Das Standardverzeichnis hierfür lautet: @SubDir"
@QString @t204 = "Wollen Sie die Installation"
@QString @t205 = " der \"@Board Utilities\" in diesem Verzeichnis fortsetzen?"
@QString @t251 = " Auf welchem Laufwerk haben Sie die \"@Board Utilities\" installiert ?"
@QString @t252 = " In welchem Verzeichnis haben Sie die \"@Board Utilities\" installiert ?"
@QString @t253 = "enthält nicht die \"@Board Utilities\"."
@QString @t254 = "existiert nicht."
@QString @t300 = " Kann die \"@Board Utilities\" nicht finden im Verzeichnis"
@QString @t301 = " Wenn die \"@Board Utilities\" nicht installiert sind, drücken Sie [Esc]."
@QString @t310 = " Die Treiber für OS/2 2.x werden im Verzeichnis @os2drv:@os2dir installiert."
@QString @t311 = " Weitere Informationen entnehmen Sie bitte der Datei 80XOS2.DOC , die nach"
@QString @t312 = " dieser Installation angezeigt wird."
@QString @t313 = " Auf welches Laufwerk wollen Sie die OS/2 2.x Treiber installieren?"
@QString @t320 = " Treiberinstallation für WINDOWS:"
@QString @t321 = "  * Bitte legen Sie Diskette \"Drivers for WINDOWS\" ein"
@QString @t322 = "  * Geben Sie ein: INSTALL"
@Endif
@If (@Language==3)
@QString @t011 = " Sélectionnez le lecteur avec les touches [] et []. Validez avec [─┘]."
@QString @t012 = " "
@QString @t021 = " Choississez OUI ou NON avec la BARRE D'ESPACEMENT."
@QString @t022 = " Appuyez sur [─┘] pour continuer (le répertoire sera créé en cas de OUI)"
@QString @t023 = " ou pour modifier la dernière entrée (en cas de NON)."
@QString @t031 = " Veuillez trouver dans le manuel @Board ou le fichier README"
@QString @t032 = " à la fin de cette installation de plus amples informations sur la"
@QString @t033 = " configuration des gestionnaires."
@QString @t041 = " Sur quel lecteur"
@QString @t042 = "est-il actuellement installé ?"
@QString @t051 = " Dans quel répertoire"
@QString @t061 = "n'existe pas. Souhaitez-vous le créer ?"
@QString @t071 = " L'installation de"
@QString @t072 = "a été préparée avec succès."
@QString @t081 = " Le répertoire"
@QString @t091 = " Quel répertoire"
@QString @t101 = "existe déjà."
@QString @t102 = " Souhaitez-vous poursuivre l'installation dans ce répertoire?"
@QString @t111 = " Choississez OUI/NON avec la barre d'espacement. Appuyez ensuite sur [─┘]."
@QString @t121 = " Sur quel lecteur souhaitez-vous installer les \"@Board Utilities\" ?"
@QString @t131 = " Pour quelle version de"
@QString @t132 = "voulez-vous installer des gestionnaires?"
@QString @t133 = " Employez les touches [] et [] pour choisir. Validez avec [─┘]."
@QString @t141 = " Sur quel lecteur souhaitez-vous installer le gestionnaire @Board"
@QString @t142 = " et les fichiers de caractères pour AutoCAD Release 11 ?"
@QString @t143 = " Dans quel répertoire souhaitez-vous installer le gestionnaire @Board"
@QString @t144 = " Sur quel lecteur souhaitez-vous installer les fichiers de caractères"
@QString @t145 = " pour AutoCAD Release 12 ?"
@QString @t146 = " Dans quel répertoire souhaitez-vous installer les fichiers de caractères"
@QString @t147 = " et les fichiers de caractères pour AutoShade / 3DStudio ?"
@QString @t148 = " Quelle taille de caractère souhaitez-vous utiliser dans AutoCAD/AutoShade ?"
@QString @t152 = "  Applications supportées:"
@QString @t153 = "  Avant d'installer des gestionnaires @Board il faut déjà avoir"
@QString @t154 = "  installé les applications concernées."
@QString @t161 = "  Au cours de l'installation, vous serez prié d'indiquer sur quel lecteur"
@QString @t162 = "  et dans quel répertoire l'application concernée est installé actuellement."
@QString @t163 = "  (exception: AutoCAD Rel.11)."
@QString @t164 = "  INFORMATIONS SUR L'EMPLOI DU CLAVIER:"
@QString @t165 = "  Si le nom de répertoire prétendu dans le carré d'entrée est juste,"
@QString @t166 = "  appuyer sur la TOUCHE D'ENTREE [─┘] pour valider."
@QString @t167 = "  Si l'application est installée dans un répertoire different, employez"
@QString @t168 = "  la TOUCHE ARRIERE [─-] et tapez le nom de répertoire juste."
@QString @t169 = "  Appuyez ensuite sur [─┘]."
@QString @t16a = "  Si vous avez indiqué, par mégarde, un faux lecteur/répertoire,"
@QString @t16b = "  appuyez sur [─┘] encore une fois pour répéter l'entrée."
@QString @t16c = "  En tout temps, vous pouvez rompre l'installation en appuyant sur [Esc]."
@QString @t16d = "  Souhaitez-vous poursuivre l'installation @Board ?"
@QString @t16e = "Poursuivre"
@QString @t16f = "  Finir   "
@QString @t171 = "    Sélectionnez les applications pour lesquelles vous souhaitez installer"
@QString @t172 = "    des gestionnaires. ATTENTION: En exécutant ce programme d'installation"
@QString @t173 = "    POUR LA PREMIERE FOIS, choississez \"@Board Utilities\" de plus."
@QString @t174 = "  Avec les touches  [] et [] , vous pouvez déplacer la barre de sélection."
@QString @t175 = "  Avec la  BARRE D'ESPACEMENT , vous pouvez activer ou désactiver pour l'in-"
@QString @t176 = "  stallation le gestionnaire représenté en contraste."
@QString @t177 = "       Aucun gestionnaire n'a été choisi pour l'installation!"
@QString @t181 = " Votre système dispose de mémoire EMS (Extended Memory)."
@QString @t182 = " Souhaitez-vous utiliser la version EMS du gestionnaire @Board DataCAD ?"
@QString @y = "OUI"
@QString @n = "NON"
@QString @t191 = " Si vous souhaitez utiliser la fonction screen save (charger ou mémoriser"
@QString @t192 = " écran), choississez le grand gestionnaire."
@QString @t193 = " Sinon, choississez le petit gestionnnaire."
@QString @t194 = "Generic CADD petit gestionnaire"
@QString @t195 = "Generic CADD grand gestionnaire"
@QString @t201 = "      Veuillez indiquer le répertoire dans lequel"
@QString @t202 = "      les \"@Board Utilities\" doivent être installés."
@QString @t203 = "      Le répertoire standard est: @SubDir"
@QString @t204 = "Souhaitez-vous poursuivre "
@QString @t205 = " l'installation des \"@Board Utilities\" dans ce répertoire ?"
@QString @t251 = " Sur quel lecteur les \"@Board Utilities\" sont-ils installés ?"
@QString @t252 = " Dans quel répertoire les \"@Board Utilities\" sont-ils installés ?"
@QString @t253 = "ne contient pas les \"@Board Utilities\"."
@QString @t254 = "n'existe pas."
@QString @t300 = " \"@Board Utilities\" introuvable dans répertoire"
@QString @t301 = " Si les \"@Board Utilities\" ne sont pas installés, appuyer sur [Esc]."
@QString @t310 = " Les gestionnaires pour OS/2 2.x seront installés dans rép. @Os2drv:@os2dir ."
@QString @t311 = " Veuillez trouver de plus amples informations dans le fichier 80XOS2.DOC "
@QString @t312 = " indiqué à la fin de cette installation."
@QString @t313 = " Sur quel lecteur souhaitez-vous installer les gestionnaires OS/2 2.x ?"
@QString @t320 = " Installation de gestionnaires pour WINDOWS:"
@QString @t321 = "  * Insérez la disquette \"Drivers for WINDOWS\", s.v.p."
@QString @t322 = "  * Entrez: INSTALL"
@Endif
@If (@Language==4)
@QString @t011 = " Con i tasti [] e [] è possibile di scegliere un'unità disco."
@QString @t012 = " Confermare con [─┘]."
@QString @t021 = " Selezionare SI o NO con la BARRA SPAZIATRICE."
@QString @t022 = " Azionare [─┘] per continuare (la directory verrà generata in caso di SI)"
@QString @t023 = " oppure per modificare l'ultima inserzione (in caso di NO)."
@QString @t031 = " Per ulteriori informazioni sulla configurazione dei driver"
@QString @t032 = " si rimanda al manuale @Board oppure al file README,"
@QString @t033 = " presente alla fine di quest' installazione."
@QString @t041 = " Su quale unità disco è attualmente installato"
@QString @t042 = "?"
@QString @t051 = " In quale directory è attualmente installato"
@QString @t061 = "non esiste. Deve essere generata ?"
@QString @t071 = " L'installazione di"
@QString @t072 = "venne preparata con successo."
@QString @t081 = " Directory"
@QString @t091 = " Quale directory"
@QString @t101 = "esiste già."
@QString @t102 = " Continuare con l'installazione in questa directory?"
@QString @t111 = " Selezionare SI / NO con la BARRA SPAZIATRICE e confermare con [─┘]."
@QString @t121 = " Su quale unità disco si desidera di installare i \"@Board Utilities\" ?"
@QString @t131 = " Per quale versione di"
@QString @t132 = "si desidera di installare il driver @Board?"
@QString @t133 = " Impiegare i tasti [] e [] per la selezione. Confermare con [─┘]."
@QString @t141 = " Su quale unità disco si desidera di installare il driver @Board"
@QString @t142 = " ed i file dei set di caratteri (Fonts) per AutoCAD Release 11 ?"
@QString @t143 = " In quale directory si desidera di installare il driver @Board"
@QString @t144 = " Su quale unità disco si desidera di installare i file dei"
@QString @t145 = " set di caratteri (Fonts) per AutoCAD Release 12 ?"
@QString @t146 = " In quale directory si desidera di installare i file dei"
@QString @t147 = " set di caratteri per AutoShade / AutoSketch ?"
@QString @t148 = " Quale dimensione di caratteri per i programmi AutoCAD e AutoShade ?"
@QString @t152 = "  Programmi d'applicazione supportati:"
@QString @t153 = "  Prima dell'installazione dei driver @Board, i relativi programmi"
@QString @t154 = "  d'applicazione devono essere già stati installati."
@QString @t161 = "  Nel corso dell'installazione sarà pregato di inserire su quale unità disco"
@QString @t162 = "  ed in quale directory è attualmente installato il programma per il quale"
@QString @t163 = "  si desidera di installare dei driver (eccezione: AutoCAD Rel.11)."
@QString @t164 = "  INFORMAZIONI SULL'USO DELLA TASTIERA:"
@QString @t165 = "  Se il nome della directory sostenuto nel riquadro dialogato è giusto,"
@QString @t166 = "  azionare  [─┘]  per continuare."
@QString @t167 = "  Se il programma d'applicazione è installato in una directory diversa,"
@QString @t168 = "  azionare il TASTO INDIETRO  [─-]  ed inserire il nome giusto della"
@QString @t169 = "  directory. Azionare  [─┘]  per continuare."
@QString @t16a = "  Se ha sbagliato indicando un'unità disco / una directory, azionare"
@QString @t16b = "  ancora  [─┘]  per ripetere l'inserzione."
@QString @t16c = "  La terminazione dell'installazione è sempre possibile con il tasto [Esc]."
@QString @t16d = "  Si desidera di continuare con l'installazione @Board ?"
@QString @t16e = "Continuare"
@QString @t16f = " Finire   "
@QString @t171 = "  Selezionare i programmi per i quali si desidera di installare dei driver."
@QString @t172 = "  ATTENZIONE:  Se questo programma d'installazione viene eseguito PER LA"
@QString @t173 = "               PRIMA VOLTA, selezionare \"@Board Utilities\" per di più."
@QString @t174 = "       Con i tasti [] e [] è possibile di muovere la trave illuminata."
@QString @t175 = "       Con la  BARRA SPAZIATRICE  è possibile di attivare e disattivare"
@QString @t176 = "       il driver raffigurato in modo invertito.  Continuare con [─┘]."
@QString @t177 = "           Non venne selezionato un driver per l'installazione !"
@QString @t181 = " Nel presente sistema è disponibile memoria EMS (Extended Memory). Deve"
@QString @t182 = " essere utilizzata la versione EMS del driver @Board per DataCAD ?"
@QString @y = " SI "
@QString @n = " NO "
@QString @t191 = " Se si desidera far uso della funzione screen save (caricare e salvare"
@QString @t192 = " la visualizzazione schermo), scegliere il driver maggiore."
@QString @t193 = " In caso contrario, scegliere il driver minore."
@QString @t194 = "Generic CADD, driver minore  "
@QString @t195 = "Generic CADD, driver maggiore"
@QString @t201 = "      Indicare la directory nella quale i \"@Board Utilities\""
@QString @t202 = "      devono essere installati."
@QString @t203 = "      La directory standard è: @SubDir"
@QString @t204 = "Continuare con l'installazione"
@QString @t205 = " dei \"@Board Utilities\" in questa directory ?"
@QString @t251 = " Su quale unità disco sono installati i \"@Board Utilities\" ?"
@QString @t252 = " In quale directory sono installati i \"@Board Utilities\" ?"
@QString @t253 = "non contiene i \"@Board Utilities\"."
@QString @t254 = "non esiste."
@QString @t300 = " Non posso trovare i \"@Board Utilities\" nella directory"
@QString @t301 = " Se non sono installati i \"@Board Utilities\", azionare [Esc]."
@QString @t310 = " I driver per OS/2 2.x verranno installati nella directory @os2drv:@os2dir ."
@QString @t311 = " Per ulteriori informazioni si rimanda al file 80XOS2.DOC visibile alla"
@QString @t312 = " fine di quest'installazione."
@QString @t313 = " Su quale unità disco si desidera di installare i driver OS/2 2.x ?"
@QString @t320 = " Installazione dei driver per WINDOWS:"
@QString @t321 = "  * Inserire il disco \"Drivers for WINDOWS\", per favore"
@QString @t322 = "  * Inserire: INSTALL"
@Endif
@EndVars

@If (@Com(1) == 744 || @Com(2) == 744 || @Com(3) == 744 || @Com(4) == 744)
 @If (@L == 2)
@Display

     Warnung:  INSTALL hat einen möglichen Adressenkonflikt in Ihrem
     System bei Adresse 2E8h festgestellt (diese Adresse ist allgemein
     als COM4 reserviert). Wenn in Ihrem System ein Modem, Fax/Modem
     oder eine Soundkarte in Betrieb ist, kann eine Inkompatibilität
     mit der @Board vorliegen.

     (Einige Peripheriegeräte verwenden diese im allgemeinen unbenutzte
     Adresse, obwohl die AT-Busspezifikation sie für Graphiksubsysteme
     vorsieht.)

     Es wird empfohlen, INSTALL jetzt abzubrechen und das betrefffende
     Peripheriegerät auf eine andere Adresse umzukonfigurieren, z.B.
     COM1 oder COM2. Dies kann durch Jumper oder Schalter auf dem Gerät
     erfolgen, oder mit Hilfe eines Dienstprogrammes.

   @Pause
   @Cls

     Wenn Sie INSTALL nicht abbrechen, können Sie zwar fortfahren, aber
     Sie werden nicht die besonderen Vorteile Ihrer @Board nutzen
     können, bis dieser Konflikt beseitigt ist. Möglicherweise treten
     Bild-Darstellungsprobleme unter WINDOWS auf und Auflösungen von
     mehr als 640x480 in 16 Farben laufen nicht korrekt.


   @Pause
@EndDisplay

 @Else /* @L */

@Display

     Warning:  INSTALL has detected a potential address conflict in
     your system at address space 2E8H (generally this space is
     reserved as COM4).  If you are running a modem, fax/modem
     or sound card in your system, there may be an incompatibility
     with the @Board .

     (Some communication peripherals try and utilize this generally
     unused space, however the AT Bus specification reserves this space
     for graphics subsystems.)

     It is recommened that you exit the INSTALL program now and
     reconfigure the other communciation device for another address
     such as COM1 or COM2.  This can be done through jumpers or
     switches on the device, or through a software utility.


   @Pause
   @Cls



     If you do not exit INSTALL, you can continue but you will not be
     able to take full advantage of the advanced features of your
     @Board until this conflict is removed.  Probably, you will
     have display problems running Windows and you will not be able
     to properly run resolutions beyond 640x480 in 16 colors.



    @Pause
@EndDisplay

 @Endif /* @L */
@EndIf /* @Com */

@Display
@t151

@t152
 ╔══════════════════════════════════════════════════════════════════════════╗
 ║                                                                          ║
 ║   WINDOWS 3.1                                                            ║
 ║   OS/2 2.x                                                               ║
 ║   AutoCAD Rel. 11/12       CADkey 5.0/386           Lotus 1-2-3 v2.3     ║
 ║   AutoShade 2.1            DataCAD 4.06             Lotus Symphony 2.0   ║
 ║   3DStudio 1.0/2.0         CADVANCE 3.51            WORD 5.0             ║
 ║   Generic CADD 5.0/6.0     MicroStation 3.3/4.0     WordPerfect 5.1      ║
 ║   VersaCAD 5.3/5.4/386                                                   ║
 ║                                                                          ║
 ╚══════════════════════════════════════════════════════════════════════════╝

@t153
@t154

 @Pause
@EndDisplay

@FlushOptions()
@GetOption @LocalWindow (18, 39)
@t161
@t162
@t163


@t164

@t165
@t166
@t167
@t168
@t169
@t16a
@t16b
@t16c




@t16d
 @t133
@Option 1001 = "@t16e"
@Option 1000 = "@t16f"
@EndOption

@If (1000 [= @Option) @Goto finish @Endif

nochmal:
@FlushGroups()
@GetGroups @Checkbox @LocalWindow (12, 39)
@t171
@t172
@t173















@t174
@t175
@t176
@Set B = "@Board Utilities                      "
@Set W = "WINDOWS 3.1                           "
@Set A = "OS/2 2.x                              "
@Set D = "AutoCAD 11 / AutoCAD 12               "
@Set T = "AutoShade 2.1, 3DStudio 1.0/2.0       "
@Set G = "CADkey 5.0/386 - Display List         "
@Set I = "DataCAD 4.06 - Display List           "
@Set H = "CADVANCE 3.51                         "
@Set K = "Generic CADD 5.0, 6.0                 "
@Set L = "MicroStation 3.3 Real Mode            "
@Set M = "MicroStation 4.0 Protected Mode       "
@Set N = "Lotus 1-2-3 V 2.3                     "
@Set O = "Lotus Symphony 2.0                    "
@Set S = "Microsoft WORD 5.0                    "
@Set U = "VersaCAD 5.3, 5.4, 7.0, 7.0/386       "
@Set V = "WordPerfect 5.1                       "
@EndGroups

@Display
@d8
  @If('B' [= @Group || 'A' [= @Group || 'W' [= @Group || 'D' [= @Group ||
      'G' [= @Group || 'H' [= @Group || 'I' [= @Group || 'K' [= @Group ||
      'L' [= @Group || 'M' [= @Group || 'N' [= @Group || 'O' [= @Group ||
      'S' [= @Group || 'U' [= @Group || 'T' [= @Group || 'V' [= @Group)
  @Else
@t177

   @Pause
   @Goto nochmal
  @Endif
@EndDisplay

utils:
@If('B'[= @Group)
@GetOutDrive @LocalWindow (13, 39)
@t121
@t011
@t012
@EndOutDrive

@GetSubDir
@t201
@t202
@t203
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@OutDrive:@SubDir")
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @OutDrive:@SubDir @t101 @t204
@t205
@t111
 @Option 0 = ""
@EndOption
 @If(0 [! @Option) @Goto utils @Endif
@Else
@Endif
@Endif /* 'B' */

nutils:
@If (('B' [! @Group) &&
  ('D' [= @Group || 'G' [= @Group || 'H' [= @Group || 'I' [= @Group ||
   'K' [= @Group || 'L' [= @Group || 'M' [= @Group || 'N' [= @Group ||
   'O' [= @Group || 'S' [= @Group || 'U' [= @Group || 'T' [= @Group ||
   'V' [= @Group))
// dh. wenn keine GDC-Utilities, jedoch DOS - Treiber gewählt wurden

 @If(@Exists "@OutDrive:@SubDir\\@Checkfile") @Else
@GetOutDrive @LocalWindow (13, 39)
@t300 @OutDrive:@Subdir.
@t251
@t011
@t012
@t301
@EndOutDrive

@GetSubdir
@t252
@Prompt = "@t091 ([─┘] = @Subdir) ? "
@LocalWindow (13, 39)
@EndSubdir
 @Endif

 @If(@Exists "@OutDrive:@SubDir\\@Checkfile") @Else
@Display
@d8
  @If(@Exists "@OutDrive:@SubDir")
@t081 @OutDrive:@SubDir @t253 @Else
@t081 @OutDrive:@SubDir @t254 @Endif

@Pause
@EndDisplay
@Goto nutils
 @Endif
@Endif /* !'B' */

@If ('W' [= @Group)
@Display
@d8
@t320

@t321
@t322

@Pause
@EndDisplay
@Endif /* 'W' */

@If('D' [= @Group || 'T' [= @Group)
@If('D' [= @Group)
 @ClearOption(11)
 @ClearOption(12)
@GetOption @LocalWindow (13, 39)
@t131 AutoCAD @t132
@t133
@Option 12 = "AutoCAD Release 12"
@Option 11 = "AutoCAD Release 11"
@EndOption
@Endif /* 'D' */

@If(11 [= @Option)
aqu11:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (13, 39)
@t141
@t142
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t142
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir

@Endif /* !'B' */

@ELSEIF (12 [= @Option)
acad12:
@GetOutDrive @acad12drv @LocalWindow (13, 39)
@t041 AutoCAD Rel.12 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @acad12dir
@t051 AutoCAD Rel.12 @t042
@Prompt = "@t091 ([─┘] = @acad12dir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@acad12drv:@acad12dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @acad12drv:@acad12dir @t061

@t021
@t022
@t023
   @Option 0 = ""
   @EndOption
 @If(0 [! @Option) @Goto acad12 @Endif
@Endif

aqu12:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (13, 39)
@t144
@t145
@t011
@t012
@EndOutDrive

@GetSubdir
@t146
@t145
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir
@Endif /* !'B' */

@ELSE /* Kein AutoCAD, nur AutoShade / 3DStudio */
aqush3ds:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (13, 39)
@t141
@t147
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t147
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir
@Endif /* !'B' */
@ENDIF /* 11,12 */

@GetOption @LocalWindow (13, 39)
@t148
@t133
 @Option 230 = " 8X16.FNT"
 @Option 220 = "  6X9.FNT"
 @Option 240 = " 9X15.FNT"
 @Option 250 = "12X20.FNT"
 @Option 260 = "12X24.FNT"
 @Option 270 = "15X25.FNT"
 @Option 280 = "16X30.FNT"
@EndOption
@Endif /* 'D' || 'T' */

@If('G'[= @Group)
cadkey:
@GetOutDrive @ckdrv @LocalWindow (13, 39)
@t041 CADkey 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ckdir
@t051 CADkey 5.0 @t042
@Prompt = "@t091 ([─┘] = @ckdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@ckdrv:@ckdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ckdrv:@ckdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadkey @Endif
@Endif

@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
 @System "Copy @ckdrv:@ckdir\\GRDEV.DAT @ckdrv:@ckdir\\GRDEV.BAK >nul"
@Endif
@Endif /* 'G' */

@If('I'[= @Group)
datacad:
@GetOutDrive @datadrv @LocalWindow (13, 39)
@t041 DataCAD 4.06 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @datadir
@t051 DataCAD 4.06 @t042
@Prompt = "@t091 ([─┘] = @datadir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@datadrv:@datadir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @datadrv:@datadir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto datacad @Endif
@Endif

@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD2")
 @System "Copy @datadrv:@datadir\\DRV\\DRIVERS.GD2 @datadrv:@datadir\\DRV\\DRIVERS2.BAK >nul"
@Endif

@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD4")
 @System "Copy @datadrv:@datadir\\DRV\\DRIVERS.GD4 @datadrv:@datadir\\DRV\\DRIVERS4.BAK >nul"
@Endif

@If(@ExtAvail > 0)
@GetOption @LocalWindow (13, 39)
@t181
@t182
@Option 400 = "@y"
@Option 410 = "@n"
@EndOption
@Endif
@Endif /* 'I' */

@If('H'[= @Group)
cadvance:
@GetOutDrive @cvandrv @LocalWindow (13, 39)
@t041 CADVANCE 3.51 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @cvandir
@t051 CADVANCE 3.51 @t042
@Prompt = "@t091 ([─┘] = @cvandir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@cvandrv:@cvandir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @cvandrv:@cvandir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadvance @Endif
@Endif
@Endif /* 'H' */

@If('K'[= @Group)
generic:
@GetOutDrive @gendrv @LocalWindow (13, 39)
@t041 Generic CADD @t042
@t011
@t012
@EndOutDrive

@GetSubdir @gendir
@t051 Generic CADD @t042
@Prompt = "@t091 ([─┘] = @gendir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@gendrv:@gendir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @gendrv:@gendir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto generic @Endif
@Endif

@GetOption @LocalWindow (13, 39)
@t191
@t192
@t193
@Option 100 = "@t194"
@Option 110 = "@t195"
@EndOption
@Endif /* 'K' */

@If('L'[= @Group)
ustatr:
@GetOutDrive @ustardrv @LocalWindow (13, 39)
@t041 MicroStation 3.3 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ustardir
@t051 MicroStation 3.3 @t042
@Prompt = "@t091 ([─┘] = @ustardir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@ustardrv:@ustardir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ustardrv:@ustardir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustatr @Endif
@Endif
@Endif /* 'L' */

@If('M'[= @Group)
ustatp:
@GetOutDrive @ustapdrv @LocalWindow (13, 39)
@t041 MicroStation 4.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ustapdir
@t051 MicroStation 4.0 @t042
@Prompt = "@t091 ([─┘] = @ustapdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@ustapdrv:@ustapdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ustapdrv:@ustapdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustatp @Endif
@Endif
@Endif /* 'M' */

@If('N'[= @Group)
lotus:
@GetOutDrive @lotusdrv @LocalWindow (13, 39)
@t041 Lotus 1-2-3 V2.3 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @lotusdir
@t051 Lotus 1-2-3 V2.3 @t042
@Prompt = "@t091 ([─┘] = @lotusdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@lotusdrv:@lotusdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @lotusdrv:@lotusdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto lotus @Endif
@Endif
@Endif /* 'N' */

@If('O'[= @Group)
symphony:
@GetOutDrive @symdrv @LocalWindow (13, 39)
@t041 Symphony 2.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @symdir
@t051 Symphony 2.0 @t042
@Prompt = "@t091 ([─┘] = @symdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@symdrv:@symdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @symdrv:@symdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto symphony @Endif
@Endif
@Endif /* 'O' */

@If('S'[= @Group)
word:
@GetOutDrive @worddrv @LocalWindow (13, 39)
@t041 WORD 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @worddir
@t051 WORD 5.0 @t042
@Prompt = "@t091 ([─┘] = @worddir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@worddrv:@worddir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @worddrv:@worddir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto word @Endif
@Endif

@If(@Exists "@worddrv:@worddir\\SCREEN.VID")
 @System "Copy @worddrv:@worddir\\SCREEN.VID @worddrv:@worddir\\SCREEN.ORG >nul"
@Endif
@Endif /* 'S' */

@If('U'[= @Group)
@GetOption @LocalWindow (13, 39)
@t131 VersaCAD
 @t132
@t133
 @Option 10 = "VersaCAD 5.3                    "
 @Option 20 = "VersaCAD 5.4, 6.0, 7.0 Real Mode"
 @Option 30 = "VersaCAD 7.0      Protected Mode"
@EndOption

versacad:
@GetOutDrive @versadrv @LocalWindow (13, 39)
@t041 VersaCAD @t042
@t011
@t012
@EndOutDrive

@If
(10 [= @Option) @GetSubdir @versa53dir @Elseif
(20 [= @Option) @GetSubdir @versa54dir @Elseif
(30 [= @Option) @GetSubdir @versa386dir @Endif
 @LocalWindow (13, 39)
@t051 VersaCAD @t042
@If(10 [= @Option) @Prompt = "@t091 ([─┘] = @versa53dir)? "  @Endif
@If(20 [= @Option) @Prompt = "@t091 ([─┘] = @versa54dir)? "  @Endif
@If(30 [= @Option) @Prompt = "@t091 ([─┘] = @versa386dir)? " @Endif
 @EndSubdir

@If(10 [= @Option)
 @If(@Exists "@versadrv:@versa53dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @versadrv:@versa53dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif

@ElseIf (20 [= @Option)
 @If(@Exists "@versadrv:@versa54dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @versadrv:@versa54dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif

@ElseIf (30 [= @Option)
 @If(@Exists "@versadrv:@versa386dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @versadrv:@versa386dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif
@Endif /* 10,20,30 */
@Endif /* 'U' */

@If('V'[= @Group)
wp:
@GetOutDrive @wpdrv @LocalWindow (13, 39)
@t041 WordPerfect 5.1 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @wpdir
@t051 WordPerfect 5.1 @t042
@Prompt = "@t091 ([─┘] = @wpdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@wpdrv:@wpdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @wpdrv:@wpdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto wp @Endif
@Endif
@Endif /* 'V' */

@If('A'[= @Group)
os2:
@GetOutDrive @os2drv @LocalWindow (13, 39)
@t313
@t011
@t012
@EndOutDrive

@Display
@d8
@t310
@t311
@t312

 @Pause
@EndDisplay
@Endif /* 'A' */

@If('B' [= @Group || 'A' [= @Group || 'D' [= @Group || 'G' [= @Group ||
    'H' [= @Group || 'I' [= @Group || 'K' [= @Group || 'L' [= @Group ||
    'M' [= @Group || 'N' [= @Group || 'O' [= @Group || 'S' [= @Group ||
    'U' [= @Group || 'T' [= @Group || 'V' [= @Group)
 @Display
@d8
@t071 @Name @Version
 @t072
@t031
@t032
@t033

 @Pause
 @EndDisplay
@Endif

@DefineDisk
    @Label = "Disk 1 of 3"
@If('B' [= @Group || 'D' [= @Group || 'G' [= @Group || 'H' [= @Group ||
    'I' [= @Group || 'K' [= @Group || 'L' [= @Group || 'M' [= @Group ||
    'N' [= @Group || 'O' [= @Group || 'S' [= @Group || 'U' [= @Group ||
    'T' [= @Group || 'V' [= @Group)
// dh. mind. eine weitere Option außer OS/2 gewählt:
 @If(@L==1) @File README.ENG @Out README @Elseif(@L==2) @File README.GER @Out README @Elseif(@L==3) @File README.FRA @Out README @Elseif(@L==4) @File README.ITA @Out README @Endif
          @File SHOW.EXE
          @File SHOW.EXE @Out @os2drv:@os2dir\\SHOW.EXE @Group a
@Else // OS/2 gewählt:
 @If(@L==1) @File README.ENG @Out @os2drv:@os2dir\\README @Group a @Endif
 @If(@L==2) @File README.GER @Out @os2drv:@os2dir\\README @Group a @Endif
 @If(@L==3) @File README.FRA @Out @os2drv:@os2dir\\README @Group a @Endif
 @If(@L==4) @File README.ITA @Out @os2drv:@os2dir\\README @Group a @Endif
          @File SHOW.EXE @Out @os2drv:@os2dir\\SHOW.EXE @Group a
@Endif

        @BeginLib V7-MIR.LIF
/* Utilities: */
          @File   S3TEST.EXE @Group b
          @File    SMODE.EXE @Group b
          @File   S3INIT.EXE @Group b
@If(@L==2) @File MNTMIR-D.BAT @Out MNTMIR.BAT @Group b @ElseIf(@L==1) @File MNTMIR-E.BAT @Out MNTMIR.BAT @Group b @ElseIf(@L==3) @File MNTMIR-F.BAT @Out MNTMIR.BAT @Group b @ElseIf(@L==4) @File MNTMIR-I.BAT @Out MNTMIR.BAT @Group b @Endif
/* Aquila-Treiber für AutoCAD 11 , AutoShade, 3D Studio: */
@If(@L==2) @File ACAD.GER @Out ACAD.DOC @Group dt @ElseIf(@L==1) @File ACAD.ENG @Out ACAD.DOC @Group dt @ElseIf(@L==3) @File ACAD.FRA @Out ACAD.DOC @Group dt @ElseIf(@L==4) @File ACAD.ITA @Out ACAD.DOC @Group dt @Endif
          @File   RCP_S3.EXP @Option 11 @Group d
          @File      BUG.LGO @Option 11 @Group d
          @File       HP.LGO @Option 11 @Group d
          @File  S3_LOGO.LGO @Option 11 @Group d
          @File   TURTLE.LGO @Option 11 @Group d
/* Aquila-Treiber für AutoCAD 12 , AutoShade, 3D Studio: */
          @File   RCP_S3.EXP @Out @acad12drv:@acad12dir\\drv\\RCP_S3.EXP  @Option 12 @Group d
          @File      BUG.LGO @Out @acad12drv:@acad12dir\\drv\\BUG.LGO     @Option 12 @Group d
          @File       HP.LGO @Out @acad12drv:@acad12dir\\drv\\HP.LGO      @Option 12 @Group d
          @File  S3_LOGO.LGO @Out @acad12drv:@acad12dir\\drv\\S3_LOGO.LGO @Option 12 @Group d
          @File   TURTLE.LGO @Out @acad12drv:@acad12dir\\drv\\TURTLE.LGO  @Option 12 @Group d
/* Aquila-Treiber nur für AutoShade, 3D Studio: */
       @If('D' [! @Group)
          @File   RCP_S3.EXP @Group t
          @File      BUG.LGO @Group t
          @File       HP.LGO @Group t
          @File  S3_LOGO.LGO @Group t
          @File   TURTLE.LGO @Group t
       @Endif
/* Fonts für AutoCAD, AutoShade: */
          @File    12x20.FNT @Out fonts\\12x20.FNT    @Group dt
          @File    12X24.FNT @Out fonts\\12x24.FNT    @Group dt
          @File    15X25.FNT @Out fonts\\15x25.FNT    @Group dt
          @File    16X30.FNT @Out fonts\\16x30.FNT    @Group dt
          @File      6X9.FNT @Out fonts\\6x9.FNT      @Group dt
          @File     8X16.FNT @Out fonts\\8x16.FNT     @Group dt
          @File     9X15.FNT @Out fonts\\9x15.FNT     @Group dt
/* CADkey: */
          @File CK_911.EXE       @Out @ckdrv:@ckdir\\CK_911.EXE @Group g
@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
          @File GRDEV.DAT    @AppendTo @ckdrv:@ckdir\\GRDEV.DAT @Group g
@Else     @File GRDEV.DAT         @Out @ckdrv:@ckdir\\GRDEV.DAT @Group g
@Endif
/* DataCAD: */
@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD2")
          @File DRIVERS.GD2  @Appendto @datadrv:@datadir\\drv\\DRIVERS.GD2 @Group i
@Else     @File DRIVERS.GD2       @Out @datadrv:@datadir\\drv\\DRIVERS.GD2 @Group i
@Endif
@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD4")
          @File DRIVERS.GD4  @Appendto @datadrv:@datadir\\drv\\DRIVERS.GD4 @Group i
@Else     @File DRIVERS.GD4       @Out @datadrv:@datadir\\drv\\DRIVERS.GD4 @Group i
@Endif
@If(400 [= @Option) /* EMS Version von DataCAD gewählt: */
          @File DL_911.EXE   @Out @datadrv:@datadir\\drv\\DL_911.EXE @Group i
@Else     @File CK_911.EXE   @Out @datadrv:@datadir\\drv\\CK_911.EXE @Group i
@Endif
/* CADVANCE: */
          @File CDV911.DRV   @Out @cvandrv:@cvandir\\GS.DRV  @Group h
          @File CAD.RND      @Out @cvandrv:@cvandir\\CAD.RND @Group h
/* Generic CADD: */
@If(@L==2) @File GCAD.GER @Out GCAD.DOC @Group k @ElseIf(@L==1) @File GCAD.ENG @Out GCAD.DOC @Group k @ElseIf(@L==3) @File GCAD.FRA @Out GCAD.DOC @Group k @ElseIf(@L==4) @File GCAD.ITA @Out GCAD.DOC @Group k @Endif
          @File LGEN911.VGD  @Out @gendrv:@gendir\\LGEN911.VGD @Option 110 @Group k
          @File SGEN911.VGD  @Out @gendrv:@gendir\\SGEN911.VGD @Option 100 @Group k
/* MicroStation Real Mode: */
          @File REMOVE.EXE   @Out @OutDrive:@SubDir\\REMOVE.EXE             @Group l
          @File REMOVE.EXE   @Out @ustardrv:@ustardir\\drivers\\REMOVE.EXE  @Group l
          @File MGLS3.EXE    @Out @ustardrv:@ustardir\\drivers\\MGLS3.EXE   @Group l
          @File MGLS3.MGL    @Out @ustardrv:@ustardir\\drivers\\MGLS3.MGL   @Group l
/* MicroStation Protected Mode: */
@If(@L==2) @File USTATION.GER @Out USTATION.DOC @Group m @ElseIf(@L==1) @File USTATION.ENG @Out USTATION.DOC @Group m @ElseIf(@L==3) @File USTATION.FRA @Out USTATION.DOC @Group m @ElseIf(@L==4) @File USTATION.ITA @Out USTATION.DOC @Group m @Endif
          @File  MSPEAS3.EXP @Out @ustapdrv:@ustapdir\\drivers\\MSPEAS3.EXP @Group m
          @File   MSSPEA.MA  @Out @ustapdrv:@ustapdir\\drivers\\MSSPEA.MA   @Group m
          @File   MSSPEA.MGL @Out @ustapdrv:@ustapdir\\drivers\\MSSPEA.MGL  @Group m
/* VersaCAD: */
@If(@L==2) @File VERSACAD.GER @Out VERSACAD.DOC @Group u @ElseIf(@L==1) @File VERSACAD.ENG @Out VERSACAD.DOC @Group u @ElseIf(@L==3) @File VERSACAD.FRA @Out VERSACAD.DOC @Group u @ElseIf(@L==4) @File VERSACAD.ITA @Out VERSACAD.DOC @Group u @Endif
          @File REMOVE.EXE   @Out REMOVE.EXE        @Group u
/* 5.3 */ @File VC2_911.COM  @Out @versadrv:@versa53dir\\VC2_911.COM   @Option 10 @Group u
          @File VCAD53.CFG   @Out @versadrv:@versa53dir\\ENVIRO.CFG    @Option 10 @Group u
          @File REMOVE.EXE   @Out @versadrv:@versa53dir\\REMOVE.EXE    @Option 10 @Group u
/* 5.4 */ @File VC2_911.COM  @Out @versadrv:@versa54dir\\VC2_911.COM   @Option 20 @Group u
          @File VCAD54.CFG   @Out @versadrv:@versa54dir\\ENVIRO.CFG    @Option 20 @Group u
          @File REMOVE.EXE   @Out @versadrv:@versa54dir\\REMOVE.EXE    @Option 20 @Group u
/* 386 */ @File VC3_911.COM  @Out @versadrv:@versa386dir\\VC3_911.COM  @Option 30 @Group u
          @File VCAD386.CFG  @Out @versadrv:@versa386dir\\ENVIRO.CFG   @Option 30 @Group u
          @File REMOVE.EXE   @Out @versadrv:@versa386dir\\REMOVE.EXE   @Option 30 @Group u
/* Lotus 1-2-3: */
          @File 123D600.DRV  @Out @lotusdrv:@lotusdir\\123D600.DRV  @Group n
          @File 123D768.DRV  @Out @lotusdrv:@lotusdir\\123D768.DRV  @Group n
          @File 123S600.DRV  @Out @lotusdrv:@lotusdir\\123S600.DRV  @Group n
          @File 123S768.DRV  @Out @lotusdrv:@lotusdir\\123S768.DRV  @Group n
          @File 123TXT43.DRV @Out @lotusdrv:@lotusdir\\123TXT43.DRV @Group n
          @File 123TEXT.DRV  @Out @lotusdrv:@lotusdir\\123TEXT.DRV  @Group n
          @File 123TXT25.DRV @Out @lotusdrv:@lotusdir\\123TXT25.DRV @Group n
/* Symphony: */
          @File 123D600.DRV  @Out @symdrv:@symdir\\123D600.DRV  @Group o
          @File 123D768.DRV  @Out @symdrv:@symdir\\123D768.DRV  @Group o
          @File 123S600.DRV  @Out @symdrv:@symdir\\123S600.DRV  @Group o
          @File 123S768.DRV  @Out @symdrv:@symdir\\123S768.DRV  @Group o
          @File 123TXT43.DRV @Out @symdrv:@symdir\\123TXT43.DRV @Group o
          @File 123TEXT.DRV  @Out @symdrv:@symdir\\123TEXT.DRV  @Group o
          @File 123TXT25.DRV @Out @symdrv:@symdir\\123TXT25.DRV @Group o
/* MS-WORD: */
@If(@L==2) @File WORD.GER @Out WORD.DOC @Group s @ElseIf(@L==1) @File WORD.ENG @Out WORD.DOC @Group s @ElseIf(@L==3) @File WORD.FRA @Out WORD.DOC @Group s @ElseIf(@L==4) @File WORD.ITA @Out WORD.DOC @Group s @Endif
          @File SCREEN.VID   @Out @worddrv:@worddir\\SCREEN.VID @Group s
/* WordPerfect: */
          @File WPGRAPH.VRS  @Out @wpdrv:@wpdir\\WPGRAPH.VRS @Group v
          @File WPTEXT.VRS   @Out @wpdrv:@wpdir\\WPTEXT.VRS  @Group v
     @EndLib

     @BeginLib 80XOS2_1.LIF
          @File    S3800.DL@@ @Out @os2drv:@os2dir\\S3800.DL@@ @Group a
          @File     S31K.DL@@ @Out @os2drv:@os2dir\\S31K.DL@@ @Group a
          @File   BVHVGA.DL@@ @Out @os2drv:@os2dir\\BVHVGA.DL@@ @Group a
          @File    S3640.DL@@ @Out @os2drv:@os2dir\\S3640.DL@@ @Group a
         @If(@L==2)
          @File   80XOS2.GER  @Out @os2drv:@os2dir\\80XOS2.DOC @Group a
         @Else
          @File   80XOS2.ENG  @Out @os2drv:@os2dir\\80XOS2.DOC @Group a
         @Endif
     @EndLib
@EndDisk

@DefineDisk
    @Label = "Disk 3 of 3"
        @BeginLib 80XOS2_2.LIF
          @File S380X8F0.DSP @Out @os2drv:@os2dir\\S380X8F0.DSP  @Group a
          @File  SS31280.DR@@ @Out @os2drv:@os2dir\\SS31280.DR@@ @Group a
          @File S31KX8F0.DSP @Out @os2drv:@os2dir\\S31KX8F0.DSP  @Group a
          @File S364X8F0.DSP @Out @os2drv:@os2dir\\S364X8F0.DSP  @Group a
          @File S31KX8F8.DSP @Out @os2drv:@os2dir\\S31KX8F8.DSP  @Group a
          @File S31KX8F4.DSP @Out @os2drv:@os2dir\\S31KX8F4.DSP  @Group a
          @File S380X8F4.DSP @Out @os2drv:@os2dir\\S380X8F4.DSP  @Group a
          @File S364X8F8.DSP @Out @os2drv:@os2dir\\S364X8F8.DSP  @Group a
          @File S380X8F8.DSP @Out @os2drv:@os2dir\\S380X8F8.DSP  @Group a
          @File S364X8F4.DSP @Out @os2drv:@os2dir\\S364X8F4.DSP  @Group a
          @File S312X8F8.DSP @Out @os2drv:@os2dir\\S312X8F8.DSP  @Group a
          @File S312X8F4.DSP @Out @os2drv:@os2dir\\S312X8F4.DSP  @Group a
          @File S312X8F0.DSP @Out @os2drv:@os2dir\\S312X8F0.DSP  @Group a
          @File DSPINSTL.EXE @Out @os2drv:@os2dir\\DSPINSTL.EXE  @Group a
          @File DSPINSTL.HLP @Out @os2drv:@os2dir\\DSPINSTL.HLP  @Group a
          @File  MONITOR.CFG @Out @os2drv:@os2dir\\MONITOR.CFG   @Group a
          @File   S3FULL.DSC @Out @os2drv:@os2dir\\S3FULL.DSC    @Group a
          @File   S3INST.DLL @Out @os2drv:@os2dir\\S3INST.DLL    @Group a
          @File   SS3800.DR@@ @Out @os2drv:@os2dir\\SS3800.DR@@  @Group a
          @File    SS31K.DR@@ @Out @os2drv:@os2dir\\SS31K.DR@@   @Group a
          @File   S3W640.DR@@ @Out @os2drv:@os2dir\\S3W640.DR@@  @Group a
          @File   S3W800.DR@@ @Out @os2drv:@os2dir\\S3W800.DR@@  @Group a
          @File    S3W1K.DR@@ @Out @os2drv:@os2dir\\S3W1K.DR@@   @Group a
          @File  S3W1280.DR@@ @Out @os2drv:@os2dir\\S3W1280.DR@@ @Group a
          @File   SS3640.DR@@ @Out @os2drv:@os2dir\\SS3640.DR@@  @Group a
          @File    FONTS.FO@@ @Out @os2drv:@os2dir\\FONTS.FO@@   @Group a
          @File     VENH.SY@@ @Out @os2drv:@os2dir\\VENH.SY@@    @Group a
          @File     VVGA.SY@@ @Out @os2drv:@os2dir\\VVGA.SY@@    @Group a
          @File   S31280.DL@@ @Out @os2drv:@os2dir\\S31280.DL@@  @Group a
          @File  BVHENH0.DL@@ @Out @os2drv:@os2dir\\BVHENH0.DL@@ @Group a
          @File  BVHENH4.DL@@ @Out @os2drv:@os2dir\\BVHENH4.DL@@ @Group a
          @File  BVHENH8.DL@@ @Out @os2drv:@os2dir\\BVHENH8.DL@@ @Group a
        @EndLib
@EndDisk
/**/

finish:
@Finish
@If('D' [= @Group || 'T' [= @Group)
@ChDrive @OutDrive
@ChDir "@SubDir"
@If(11 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(11 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(12 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET ACADDRV=@acad12drv:@acad12dir\\DRV\n")
@Endif
@If(12 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET DSPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
@Endif
@If(11 [! @Option && 12 [! @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(220 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\6X9.FNT\n")   @Endif
@If(230 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\8X16.FNT\n")  @Endif
@If(240 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\9X15.FNT\n")  @Endif
@If(250 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X20.FNT\n") @Endif
@If(260 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X24.FNT\n") @Endif
@If(270 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\15X25.FNT\n") @Endif
@If(280 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\16X30.FNT\n") @Endif
@Endif /* 'D' || 'T' */

@If (1001 [= @Option)
 @If ('A' [= @Group)
  @ChDrive @os2drv
  @ChDir "@os2dir"
  @System "show 80XOS2.DOC"
 @Endif

 @If('B' [= @Group || 'D' [= @Group || 'G' [= @Group || 'H' [= @Group ||
    'I' [= @Group || 'K' [= @Group || 'L' [= @Group || 'M' [= @Group ||
    'N' [= @Group || 'O' [= @Group || 'S' [= @Group || 'U' [= @Group ||
    'T' [= @Group || 'V' [= @Group)
  @ChDrive @OutDrive
  @ChDir "@SubDir"
  @System "show readme"
 @Elseif ('A' [= @Group)
  @ChDrive @os2drv
  @ChDir "@os2dir"
  @System "show readme"
 @Elseif ('W' [= @Group)
  @ChDrive @StartupDrive
  @ChDir "@StartupDir"
  @If(@L==1) @System "show readme.eng" @ElseIf(@L==2) @System "show readme.ger" @ElseIf(@L==3) @System "show readme.fra" @ElseIf(@L==4) @System "show readme.ita" @Endif
 @Endif
@ElseIf (1000 [= @Option)
 @ChDrive @StartupDrive
 @ChDir "@StartupDir"
 @If(@L==1) @System "show readme.eng" @ElseIf(@L==2) @System "show readme.ger" @ElseIf(@L==3) @System "show readme.fra" @ElseIf(@L==4) @System "show readme.ita" @Endif
@Endif
@EndFinish