home *** CD-ROM | disk | FTP | other *** search
/ No Fragments Archive 10: Diskmags / nf_archive_10.iso / MAGS / STFORMAT / STF33B.MSA / README < prev    next >
Text File  |  1992-02-12  |  7KB  |  143 lines

  1. **************************
  2. * COMPO Software Limited *
  3. * Write On               *
  4. * Release 1.0C           *
  5. * Feb-92                 *
  6. **************************
  7. Thank you for using this copy of Write ON from the ST Format cover 
  8. disk. Write ON has taken many years of development and we hope you 
  9. enjoy using it and make it your standard word processor. Please 
  10. remember that this is your copy and whilst you may make back up 
  11. copies for your own security please do not give copies to other ST 
  12. owners. Software piracy is illegal and also hurts you too. We can 
  13. only earn money in order to develop Write ON and offer a Helpline 
  14. service if users use a legitimate copy of our products.
  15. Write ON is not copy protected. If you treat this fact with 
  16. respect then we will never have to consider copy protection for 
  17. future versions.
  18.  
  19. Some common error messages
  20. Screen too narrow?
  21.     You have a TV or Colour monitor and need to switch to medium
  22.     resolution using the Set Preferences command from the Options
  23.     menu of your ST's desktop.
  24. Unable to find STANDARD.KEY
  25.     Trash the wile WRITE_ON.INF and try again.
  26. xxx Missing corrupted or too large
  27.     Means what it says! (Too large means will not fit into memory.) 
  28.     Try removing some fonts. May also be caused by faulty 
  29.     installation. Single disk drive users should also read the note 
  30.     in this file.
  31. Out of memory/almost out of memory
  32.     Try deleting some fonts or splitting a long document into 
  33.     chapters. Else you need to upgrade your memory.
  34.     After a memory error you are returned to Write ON in order to 
  35.     save your current document. You will have to exit Write ON and 
  36.     load it again to get your memory back.
  37.  
  38. Problems with printing
  39. If you experience problems printing typically when the printer 
  40. prints but the printout is corrupt this may be caused by either:-
  41.     A Clock program that displays the time on screen - if so
  42.     disable it before running Write ON
  43.     You have Turbo ST installed. (If this is the case then
  44.     run Turbo ST as a desk accessory and disable it at print
  45.     time
  46. With some dot matrix printers, printing text in a printer font 
  47. when text is justified may take a long time. The print head 
  48. appears to print one word at a time. This is due to limitations in 
  49. the printer which make micro-spacing difficult. To speed the 
  50. process up either change fonts to a graphic font such as Helbo or 
  51. set the paragraph justification to left aligned. (The most common 
  52. occurrence is with some Star printers - Nx series and LC10). 
  53. Write ON on a 520 ST.
  54. Running Write ON on a 520 ST is a squeeze which is why we 
  55. recommend 
  56. at least 1 Meg of memory. To load Write ON in a half Meg machine 
  57. disable all desktop accessories. (To do this rename all the *.ACC 
  58. files on your Write ON work disk to *.ACX using the Show Info 
  59. command.) Then reset your ST so that no accessories are loaded 
  60. before running Write ON.
  61. Note that by the time you have loaded Write ON you have little 
  62. more than 100k of free memory. If you decide to upgrade your ST to 
  63. 1 Meg not only will Write ON have nearly five times more free 
  64. memory to run in (yes 5 times!) you will also be able to run many 
  65. other programs that will only run in machines with a minimum of 1 
  66. Meg.
  67.  
  68. The AUTO folder
  69. In the Auto folder are two patch programs which fix bugs in TOS. 
  70. LA.PRG is only needed with early versions of TOS and POOLFIX4 only 
  71. with TOS 1.4. These never occur on ST(E)'s which are always TOS 
  72. 1.6 or higher and hence no patch is required. To test if you need 
  73. either patch click on About under the Atari Icon on your ST's 
  74. desktop. If the only copyright date is 1985 then you need LA.PRG, 
  75. if the copyright date is 1985,86,87,88,89 then you will need 
  76. POOLFIX4.PRG else you should not have need for either patch and 
  77. can delete the AUTO folder from your Work Disk.
  78. Remember that for the patch to install your work disk must be in 
  79. drive A when you start your ST.
  80.  
  81. Single disk drive systems
  82. If you only have one floppy drive then you should always save your 
  83. data files to logical drive B. To do this whenever you first save 
  84. a document select drive B from the file selector. When prompted by 
  85. Write ON change disks and insert your data disk. Only change disks 
  86. when prompted to do so by Write ON - otherwise data can become 
  87. corrupted. Let's repeat that one more time... ONLY CHANGE DISKS 
  88. WHEN PROMPTED TO DO SO BY THE PROGRAM.
  89.  
  90. Problems centring text?
  91. Users new to the concept of paragraph style based word processing 
  92. often have trouble understanding how to centre text in Write ON. 
  93. All justification is handled by paragraph styles - to centre all 
  94. the text for a particular paragraph style change the paragraph 
  95. style in the Layout menu to be centred. If you want to centre a 
  96. particular line then change its paragraph style to one that is 
  97. centred - on the release disks the default layout has the style Ac 
  98. which will centre your text.
  99. If you change the settings of the default style A1 to centred 
  100. then, obviously, all the paragraphs in your document will be 
  101. centred.
  102. Take some time to look at how paragraph styles work in styling the 
  103. demo documents... this should help you understand the concept.
  104. Still confused? Don't worry call the Helpline and we will talk you 
  105. through it.
  106.  
  107. Technical Support
  108. ST Format users can get technical support direct from the COMPO 
  109. Helpline. ST FORMAT readers can use the Helpline service if they 
  110. register there Write ON with COMPO. Registration costs £7.50 for 
  111. one year or £15 for lifetime. The Helpline number is 0480 891271 
  112. and is available to all REGISTERED users.
  113. Please respect the Helpline hours of 3pm to 8pm (UK time!). You 
  114. can try calling us on Saturday between noon and 4pm, we are often 
  115. in the office then too - but no guarantees.
  116.  
  117. Registration
  118. To register your copy of Write ON please write to COMPO with your 
  119. name & address enclosing a cheque payable to COMPO Software Ltd or 
  120. your credit card details. If you have a technical problem you may 
  121. register by telephone to the Helpline with a credit card.
  122. Registration costs £7.50 for 12 months or £15 for lifetime. 
  123. Fonts and Printer drivers
  124. There is a special driver disk for the BJ10e printer which costs 
  125. £4.99 and is available from the Helpline.
  126. Users of BJ10ex should install for Epson LQ850.
  127. DeskJet 500, Epson LQ and NEC Px users can get special disks with 
  128. extra printer font support from the Helpline.
  129. Do you want to explore more about Write ON fonts and Printer 
  130. drivers? We have a helpsheet and disk with sample files which 
  131. costs £2.99. Give the Helpline a ring for more details.
  132.  
  133. That's Write
  134. If you like Write ON but want more features please give us a ring. 
  135. There is an upgrade path to That's Write for all registered users 
  136. of Write ON. Your Write ON files are fully compatible with That's 
  137. Write.
  138.  
  139. Suggestions
  140. We welcome suggestions for improvements and new features to both 
  141. the Write ON manual and program. COMPO are working on new releases 
  142. for Write ON, many of the new features are being added due to 
  143. popular request.