NOTE: You may want to choose the Word Wrap option from the Notepad Edit menu to make this text more readable.
NOTE: DO NOT Choose "Work Offline"
When you run Organic View after installation, you may get a message suggesting that an Internet connection is not available. This setting will interrupt communication with the Edugen server and the program will not function properly. Choose "Try Again" (or "Connect").
NOTE: DO NOT "Close" the Edugen server without exiting the course first. You may lose data from your study session. You may EXIT the Organic View program from any page in the program. When you want to exit the program, simply click on the Logout button inside the Navigation Icon Bar. This button terminates your current program session and logs you out of the program.
NOTE: Notes' e-mailing function may fail to operate under old versions of e-mail clients and/or operating systems. If you have trouble using this function, please use copy and paste from the Note window into your e-mail window in order to send your note via e-mail.
System Requirements
----------------------------
Minimal configuration:
* Pentium 166 or higher
* 32MB RAM
* 4x speed CD-ROM drive
* 800x600 screen resolution, hi-color mode
* Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, Windows XP
* Windows compatible sound card
* Netscape Navigator V4.7X or Internet Explorer v5.0 or higher versions.
Preferred configuration:
* Pentium II or higher
* 64MB RAM
* 16x speed CD-ROM drive
* 800x600 screen resolution, hi-color mode
* Windows 95, Windows 98, Windows ME, Windows 2000, Windows NT, Windows XP
* Windows compatible sound card
* Netscape Navigator V4.7X or Internet Explorer v5.0 or higher versions.
NOTE: The minimum memory requirement for running Organic View CD on a Windows 2000 system is 128 MB RAM.
NOTE: Organic View will run with 640x480 screen resolution, though some important features will not fit into the program window. We recommend you to change your computer screen resolution to 800x600.
Program Installation Requirements:
Running Organic View will require the following:
Netscape Navigator V4.7X or Internet Explorer v5.0 or higher versions;
MS Java Virtual Machine (recommended) or Sun's Java Virtual Machine;
Shockwave/Flash Player;
Chem 3D plug-in (You can downloade it at www.cambridgesoft.com);
QuickTime Player;
RasMol molecula viewer;
These programs except browsers and Chem 3D plug-in can be found in the Installers folder on your CD if required.
1. Insert the Organic View CD into the CD-ROM drive. If the Auto Run menu appears, click "Install" and follow the on screen instructions. If Auto Run is disabled or the menu does not appear, select "Run..." from the Windows "Start" menu (usually in the lower left corner of the screen) and type "D:\Go" in the Open box (where D is the letter of your CD-Rom drive). Click OK to run the installation program.
2. The program will scan your hard disc to see which components you need to install and will ask you if you want to install them if they are not already installed. It may not be necessary for you to install all of the following components.
3. If you needed to install IE5, your PC will need to be restarted. Once it has restarted you can eject and then reinsert the CD tray - the Auto Run menu will again appear. Click "Install" to continue installation. If the menu does not appear follow previous instructions as detailed in 1. above.
4. If necessary you will now be asked to install "Microsoft Java Virtual Machine" if it has not already been installed. Click "Yes" to install and follow on screen instructions. Clicking "No" will bypass this component. After this installation you will be asked if you want to restart your computer. This is not necessary at this stage, click "No". If you select "No," please remember to restart your computer before running the Organic View program. You will again need to eject and then reinsert the CD; the Auto Run menu will again appear. Click "Install" to continue installation and follow the on-screen instructions. If the menu does not appear, follow previous instructions as detailed in 1. above.
5. You will now be asked, if required, to install Macromedia Shockwave Player. Click "Yes" to install and follow the on-screen instructions. Clicking "No" will bypass this component.
6. The remaining components of Organic View will now be installed. Please follow the on-screen instructions.
7. Before running the program, please restart your computer.
Brief Instructions:
--------------------
1. Contents List.
- Use the Contents List on the left of your Organic View screen to navigate through all parts of the course.
2. Content screen. Main Menu Bar.
- Click on the Wiley logo to go to Wiley Web site.
- Click on the "Content" button to hide / show the Contents menu list.
- "Help" button brings up the help title page.
- "Main Menu" Click this button if you need to access any option of the main menu.
- "Resource Manager" This button helps you manage all resources of the course in the most efficient way. You will be able to browse the course by chapters, sections or resource types, access any part of the course directly, and operate your Play List.
- Click on the "Bookmark" to place a bookmark on the content page. The bookmark placed is displayed as a small icon on the top-left corner of the appropriate content page.
- Click on "Notes" to open a Notes window.
- "Exit" button exits the program.
-------------------------------
TROUBLESHOOTING AND OTHER RECOMMENDATIONS
Chem3D plug-in:
In case browser's plug-in don't work you can try the following.
1. Run installer once again.
2.a. If installer detects that something is missing and suggests to install
necessary components - follow this suggestion
2.b Installer may suggest to uninstall everything. Do this and run
installer once again then.
During installation follow default settings and do not try to customize the
set of components being installed.
if these steps above did not help, then try the following.
1. Uninstall Chem 3 D studio Net using "Add/Remove Programs" control panel.
2. Manually clean up the location where it was installed.
3. Re-install product using default settings.
Manual clean-up means that after you uninstall, go to location C:\Program Files\ChemOffice2002 (default location) or wherever it was installed and delete everything in this folder.
---------------------------------
TCP-IP protocol:
TCP/IP is the underlying communication protocol for the Internet. Your Organic View CD uses this protocol and cannot function properly on a system without TCP/IP support. Organic View Setup checks for the presence of TCP/IP and displays a warning message if it is not present.
If you have an Internet Service provider to allow you to send email and browse the Internet, then TCP/IP should be set up already.
NOTE: TCP-IP protocol installation requires the Windows set-up CD-ROM.
---------------------------------
a) TCP/IP Set-up in Windows 95/98
1. Choose "Network" from START/Settings/Control Panel
2. Click "Add" button. This will bring up "Select Network Component Type" dialog. Choose "Protocol" from the list and click "Add..."
3. In the new dialog "Select Network Protocol" choose "Microsoft" and "TCP/IP". Press "OK".
4. An updated "Network" dialog will appear. From the drop-down menu "Primary Network Logon," choose "Windows Logon" and press "OK".
5. Restart the machine if required.
b) TCP/IP Set-up in Windows Millennium
1. Right-click on "My Network Places" icon and choose the Properties command.
2. Click "Add" button. This will bring up "Select Network Component Type" dialog. Choose "Protocol" from the list and click "Add..."
3. In the new dialog "Select Network Protocol" choose "Microsoft" and "TCP/IP". Press "OK".
4. An updated "Network" dialog will appear. From the drop-down menu "Primary Network Logon" choose "Windows Logon" and press "OK".
5. Restart the machine if required.
c) TCP/IP Set-up in Windows NT 4.0 (in case network is not installed).
1. Start the Network applet from the Control Panel.
2. If the question "Windows Networking is not installed. Do you want to install now?" appears, answer "No".
3. Choose "Protocols" bookmark; click on the "Add..." button.
4. Choose "TCP/IP Protocol" and press "OK".
5. Answer "No" for the question "Do you wish to use DHCP?"
6. Indicate the path to files with Windows NT distribution; click on the "Continue" button.
7. When all the files have been copied, press "Close".
8. Choose "Ignore" when the "Noncritical Error" appears.
9. Answer "No" when the "Restart Computer" suggestion appears.
10. Start the "Services" applet from the Control Panel.
11. Choose "TCP/IP Netbios Helper" service from the list.
12. Click on the "Startup..." button.
13. Choose "Manual" Startup Type.
14. Press "OK".
15. Press "Close".
16. Start the "Devices" applet from the Control Panel.
17. Choose "WINS Client (TCP/IP)" service from the list.
18. Click on the "Startup..." button.
19. Choose "Manual" Startup Type.
20. Press "OK".
21. Press "Close".
22. Restart your computer.
d) TCP/IP Set-up in Windows NT 4.0 when network is available.
1. Start the Network applet from the Control Panel.
2. Choose "Protocols" bookmark; click on the "Add..." button.
3. Choose "TCP/IP Protocol" and click "OK".
4. When the question "Do you wish to use DHCP?" appears, answer "Yes".
5. Indicate the path to files with Windows NT distribution, press "Continue".
6. Choose the "Bindings" bookmark. In the combo box choose "all protocols".
7. Open "TCP/IP Protocol" item.
8. One by one select all the adapters in the list below "TCP/IP Protocol" and press the "Disable" button for each of them.
9. Click "Close".
10. When "Restart Computer" suggestion appears, answer "Yes".
e) TCP/IP Set-up in Windows 2000.
1. Open the Network and Dial-Up Connections folder (Start/Settings/Network and Dial-Up Connections).
2. Right-click the Local Area Connection icon and choose the Properties command. The Local Area Connection Properties dialog box appears.
3. Click the Install... button. The Select Network Component Type dialog box appears. Select Protocol and click the Add... button.
4. The Select Network Protocol dialog box appears. Choose Internet Protocol (TCP/IP), then click the OK button.
5. If prompted, insert your Windows 2000 CD and click OK.
6. Click the Close button in the Local Area Connection Properties dialog box.
If you use a proxy server for Internet connections, the local host address for Organic View ("127.0.0.1") has to be added to the proxy bypass list of your browser (see menu "Tools/Internet Options.../Connections(Tab)/LAN Settings/Advanced.../Exceptions: Do not use proxy server for addresses
beginning with:" "127.0.0.1"). This makes your local host communication faster and more reliable and does not affect your browser security in any way. If you use Internet Explorer, this proxy bypass will be added automatically after the program is started.
If you use Netscape Navigator, you need to adjust settings manually as follows:
1. Select Edit > Preferences...
2. Expand Advanced > Proxy from the Category list, and then click the View button to see the manual proxy configuration;
3. Type "127.0.0.1" into the Exceptions field of the Manual Proxy Configuration dialog box.
a) Working offline. You will not be able to browse your course content correctly if you switch your browser to the Offline mode. Make sure you have unchecked the "File / Work Offline" menu item.
b) You may receive browser error messages while browsing your course if your Internet Explorer settings differ from their default values. In most cases setting "Medium" security level for the Internet Web content zone will be enough for proper Edugen operation. This is a default browser setting so Edugen will work unless someone has changed it.
c) The following Explorer settings block the technologies that are generally used now. Their default values are acceptable. Nevertheless if changed they can distort some Course pages as well as any other pages coming from the web. Make sure they are set to their default values:
- Tools/Internet Options/General (Tab)/Accessibility.../"Ignore colors specified on web pages" checkbox - unchecked
- Tools/Internet Options/General (Tab)/Accessibility.../"Ignore font styles specified on web pages" checkbox - unchecked
- Tools/Internet Options/General (Tab)/Accessibility.../"Ignore font sizes specified on web pages" checkbox - unchecked
- Tools/Internet Options/General (Tab)/Accessibility.../ "Format documents using my style sheet" checkbox - unchecked
d) Corporate security issues. You might be unable to change your browser security settings if your browser is deployed in a network environment that implies advanced corporate security regulation. If so, consult your system administrator and try the following:
1. Add your local host address (127.0.0.1) to the "Trusted sites" Web content zone of your browser or find a Web content zone where this address is located:
1.1. Choose the "Security" tab from the menu "Tools/Internet Options".
1.2. Select "Trusted sites" Web content zone.
1.3. Press "Sites...".
1.4. Check the "Web sites" list for "127.0.0.1" address availability and if it is not there, type it in the "Add this Web site to the zone" field and press the "Add" button.
1.5. If the address you have just typed is already assigned to some other Internet zone, then you will be prompted by the following alert message:
"The site you specified already exists in another zone. Please remove the site from that zone before adding it to the current zone"
This means that either "Local Intranet" or "Restricted Sites" Web content zone already has "127.0.0.1" address assigned. If so, then press "OK" to close the "Trusted sites" window and ascertain the "127.0.0.1" address location before you proceed to the next step:
- check "Local Intranet" Web content zone, press "Sites..." button, then "Advanced..." button in the opened window and verify the "Local Intranet" Web address list. Press "OK" to close the "Local Intranet" window and then "OK" one more time to close another "Local Intranet" window;
- check the "Restricted sites" Web content zone, then press "Sites..." button and verify the "Restricted sites" Web address list. Press "OK" to close the "Restricted sites" window.
2. Tune-up your browser security settings for the content zone that includes "127.0.0.1" (or the zone you have revealed to carry "127.0.0.1" address):
2.1. Select the Web content zone that carries "127.0.0.1" address.
2.2. Press "Custom level..." button. This will invoke the "Security settings" window.
2.3. Make sure permissions are granted to the following actions:
- "Run ActiveX controls and plug-ins" - Enable (allow running browser plug-ins such as Flash, QuickTime etc.);
- "Script ActiveX controls marked safe for scripting" - Enable (required for JavaScript and Java applets interaction);
- "Java permissions" - one of the following: "High safety" OR "Medium safety" OR "Low safety";
- "Scripting of Java applets" - Enable (required for the JavaScript and Java applets interaction).
2.4. Press "OK" to close the "Security Settings" window.
3. Press "OK" to close the "Internet Options" window.
e) If your browser displays the alert message: "Sorry, Content Advisor will not allow you to see this site" while running Organic View, please consult your system administrator for the Content Advisor permissions tune-up.
a) Working offline. You will not be able to browse your course content correctly if you set your browser to the Offline mode. Switch online by selecting the
"File / Offline /Work Online" menu item.
b) If you are unable to run Organic View with your Netscape browser then check the following essential browser settings. The default values of these parameters are acceptable. Nevertheless if changed they can block proper Organic View operation.
1. Select menu " Edit/Preferences..." item, then open "Advanced" category
2. Make sure following option values are set to their defaults:
- "Automatically load images" - checked.
- "Enable Java" - checked;
- "Enable JavaScript" - checked;
- "Enable style sheets" - checked;
3. Press "OK" to close "Preferences" window.
c) Following Netscape settings can block the technologies that are generally used now. Their default values are acceptable. Nevertheless, if changed they can distort some Course pages as well as any other pages coming from the Web. Make sure they are set to their default values:
1. Change to the "Appearance/Fonts" category and make sure that the "Use my default fonts, overriding document-specified fonts" option is unchecked;
2. Change to the "Appearance/Colors" category and make sure that the "Always use my colors, overriding document" option is unchecked;
3. Press "OK" to close the "Preferences" window.
d) If your browser displays "NetWatch Protection Alert" messages while running your Organic View program, please consult your system administrator for the NetWatch permissions tune-up.
If all or some of Netscape Navigator V4.7X and Internet Explore V5.0 or higher versions are installed on your system it is possible to switch the program to use the one of your choice. To do this:
1. The Organic View program will need to be running. Restore the Edugen server, which will be minimized on your task bar (usually at the bottom of the screen). To do this, right click on the Edugen item and choose "Select".
2. Choose your preferred browser and click OK.
3. Shut down Organic View and restart to select the new browser.
4. So that your new browser displays the program correctly it may be necessary to install the following components again: MS Java machine and Shockwave Player. These programs can be found on the root of your CD if required.
THE MATERIAL CONTAINED IN THIS PROGRAM IS PROTECTED BY COPYRIGHT LAW AND
INTERNATIONAL TREATIES. UNAUTHORIZED REPRODUCTION OR DISTRIBUTION OF THIS
PROGRAM, OR ANY PORTION OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL
PENALTIES, AND WILL BE PROSECUTED TO THE MAXIMUM EXTENT PERMISSIBLE UNDER
LAW.
Copyright (c) 1995-2003 by John Wiley & Sons, Inc. All rights reserved.
This Organic View contains Macromedia Shockwave(tm) Player and Macromedia Flash(tm) Player software by Macromedia, Inc., Copyright (c) 1995-2002 Macromedia, Inc.
All rights reserved. Macromedia, Shockwave, and Flash are trademarks of Macromedia.
