Windows NT Super Tune-Up Kit

home *** CD-ROM | disk | FTP | other *** search

/ Windows NT Super Tune-Up Kit / PIE-WindowsNTSuperTuneUpKit-1997.iso / COMPRESS / UNZ512XN / ZIPINFO.DOC < prev

Wrap

Text File | 1994-08-25 | 22KB | 450 lines

ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) NAME zipinfo - list detailed information about a ZIP archive SYNOPSIS zipinfo [-12smlvhtTz] file[.zip] [file(s) ...] [-x xfile(s) ...] unzip -Z [-12smlvhtTz] file[.zip] [file(s) ...] [-x xfile(s) ...] DESCRIPTION zipinfo lists technical information about files in a ZIP archive, most commonly found on MS-DOS systems. Such infor- mation includes file access permissions, encryption status, type of compression, version and operating system or file system of compressing program, and the like. The default behavior (with no options) is to list single-line entries for each file in the archive, with header and trailer lines providing summary information for the entire archive. The format is a cross between Unix ``ls -l'' and ``unzip -v'' output. See DETAILED DESCRIPTION below. Note that zipinfo is the same program as unzip (under Unix, a link to it); on some systems, however, zipinfo support may have been omitted when unzip was compiled. ARGUMENTS file[.zip] Path of the ZIP archive(s). If the file specification is a wildcard, each matching file is processed in an order determined by the operating system (or file sys- tem). Only the filename can be a wildcard; the path itself cannot. Wildcard expressions are similar to Unix egrep(1) (regular) expressions and may contain: * matches a sequence of 0 or more characters ? matches exactly 1 character [...] matches any single character found inside the brackets; ranges are specified by a beginning character, a hyphen, and an ending character. If an exclamation point or a caret (`!' or `^') fol- lows the left bracket, then the range of charac- ters within the brackets is complemented (that is, anything except the characters inside the brackets is considered a match). (Be sure to quote any character which might otherwise be interpreted or modified by the operating system, particularly under Unix and VMS.) If no matches are found, the specification is assumed to be a literal Info-ZIP Last change: 28 Aug 94 (v2.02) 1 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) filename; and if that also fails, the suffix .zip is appended. Note that self-extracting ZIP files are sup- ported; just specify the .exe suffix (if any) expli- citly. [file(s)] An optional list of archive members to be processed. Regular expressions (wildcards) may be used to match multiple members; see above. Again, be sure to quote expressions that would otherwise be expanded or modi- fied by the operating system. [-x xfile(s)] An optional list of archive members to be excluded from processing. OPTIONS -1 list filenames only, one per line. This option excludes all others; headers, trailers and zipfile com- ments are never printed. It is intended for use in Unix shell scripts. -2 list filenames only, one per line, but allow headers (-h), trailers (-t) and zipfile comments (-z), as well. This option may be useful in cases where the stored filenames are particularly long. -s list zipfile info in short Unix ``ls -l'' format. This is the default behavior; see below. -m list zipfile info in medium Unix ``ls -l'' format. Identical to the -s output, except that the compression factor, expressed as a percentage, is also listed. -l list zipfile info in long Unix ``ls -l'' format. As with -m except that the compressed size (in bytes) is printed instead of the compression ratio. -v list zipfile information in verbose, multi-page format. -h list header line. The archive name, actual size (in bytes) and total number of files is printed. -t list totals for files listed or for all files. The number of files listed, their uncompressed and compressed total sizes, and their overall compression factor is printed; or, if only the totals line is being printed, the values for the entire archive are given. Note that the total compressed (data) size will never match the actual zipfile size, since the latter includes all of the internal zipfile headers in addi- tion to the compressed data. Info-ZIP Last change: 28 Aug 94 (v2.02) 2 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) -T print the file dates and times in a sortable decimal format (yymmdd.hhmmss). The default date format is a more standard, human-readable version with abbreviated month names (see examples below). -z include the archive comment (if any) in the listing. DETAILED DESCRIPTION zipinfo has a number of modes, and its behavior can be rather difficult to fathom if one isn't familiar with Unix ls(1) (or even if one is). The default behavior is to list files in the following format: -rw-rws--- 1.9 unx 2802 t- defX 11-Aug-91 13:48 perms.2660 The last three fields are the modification date and time of the file, and its name. The case of the filename is respected; thus files which come from MS-DOS PKZIP are always capitalized. If the file was zipped with a stored directory name, that is also displayed as part of the filename. The second and third fields indicate that the file was zipped under Unix with version 1.9 of zip. Since it comes from Unix, the file permissions at the beginning of the line are printed in Unix format. The uncompressed file-size (2802 in this example) is the fourth field. The fifth field consists of two characters, either of which may take on several values. The first character may be either `t' or `b', indicating that zip believes the file to be text or binary, respectively; but if the file is encrypted, zipinfo notes this fact by capitalizing the char- acter (`T' or `B'). The second character may also take on four values, depending on whether there is an extended local header and/or an ``extra field'' associated with the file (fully explained in PKWare's APPNOTE.TXT, but basically analogous to pragmas in ANSI C--i.e., they provide a stan- dard way to include non-standard information in the archive). If neither exists, the character will be a hyphen (`-'); if there is an extended local header but no extra field, `l'; if the reverse, `x'; and if both exist, `X'. Thus the file in this example is (probably) a text file, is not encrypted, and has neither an extra field nor an extended local header associated with it. The example below, on the other hand, is an encrypted binary file with an extra field: RWD,R,R 0.9 vms 168 Bx shrk 9-Aug-91 19:15 perms.0644 Extra fields are used for various purposes (see discussion of the -v option below) including the storage of VMS file Info-ZIP Last change: 28 Aug 94 (v2.02) 3 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) attributes, which is presumably the case here. Note that the file attributes are listed in VMS format. Some other possibilities for the host operating system (which is actu- ally a misnomer--host file system is more correct) include OS/2 or NT with High Performance File System (HPFS), MS-DOS, OS/2 or NT with File Allocation Table (FAT) file system, and Macintosh. These are denoted as follows: -rw-a-- 1.0 hpf 5358 Tl i4:3 4-Dec-91 11:33 longfilename.hpfs -r--ahs 1.1 fat 4096 b- i4:2 14-Jul-91 12:58 EA DATA. SF --w------- 1.0 mac 17357 bx i8:2 4-May-92 04:02 unzip.macr File attributes in the first two cases are indicated in a Unix-like format, where the seven subfields indicate whether the file: (1) is a directory, (2) is readable (always true), (3) is writable, (4) is executable (guessed on the basis of the extension--.exe, .com, .bat, .cmd and .btm files are assumed to be so), (5) has its archive bit set, (6) is hidden, and (7) is a system file. Interpretation of Macintosh file attributes is unreliable because some Macin- tosh archivers don't store any attributes in the archive. Finally, the sixth field indicates the compression method and possible sub-method used. There are six methods known at present: storing (no compression), reducing, shrinking, imploding, tokenizing (never publicly released), and deflat- ing. In addition, there are four levels of reducing (1 through 4); four types of imploding (4K or 8K sliding dic- tionary, and 2 or 3 Shannon-Fano trees); and four levels of deflating (superfast, fast, normal, maximum compression). zipinfo represents these methods and their sub-methods as follows: stor; re:1, re:2, etc.; shrk; i4:2, i8:3, etc.; tokn; and defS, defF, defN, and defX. The medium and long listings are almost identical to the short format except that they add information on the file's compression. The medium format lists the file's compression factor as a percentage indicating the amount of space which has been ``removed'': -rw-rws--- 1.5 unx 2802 t- 81% defX 11-Aug-91 13:48 perms.2660 In this example, the file has been compressed by more than a factor of five; the compressed data are only 19% of the ori- ginal size. The long format gives the compressed file's size in bytes, instead: -rw-rws--- 1.5 unx 2802 t- 538 defX 11-Aug-91 13:48 perms.2660 Adding the -T option changes the file date and time to decimal format: Info-ZIP Last change: 28 Aug 94 (v2.02) 4 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) -rw-rws--- 1.5 unx 2802 t- 538 defX 910811.134804 perms.2660 Note that because of limitations in the MS-DOS format used to store file times, the seconds field is always rounded to the nearest even second. For Unix files this is expected to change in the next major releases of zip(1L) and unzip. In addition to individual file information, a default zip- file listing also includes header and trailer lines: Archive: OS2.zip 5453 bytes 5 files ,,rw, 1.0 hpf 730 b- i4:3 26-Jun-92 23:40 Contents ,,rw, 1.0 hpf 3710 b- i4:3 26-Jun-92 23:33 makefile.os2 ,,rw, 1.0 hpf 8753 b- i8:3 26-Jun-92 15:29 os2unzip.c ,,rw, 1.0 hpf 98 b- stor 21-Aug-91 15:34 unzip.def ,,rw, 1.0 hpf 95 b- stor 21-Aug-91 17:51 zipinfo.def 5 files, 13386 bytes uncompressed, 4951 bytes compressed: 63.0% The header line gives the name of the archive, its total size, and the total number of files; the trailer gives the number of files listed, their total uncompressed size, and their total compressed size (not including any of zip's internal overhead). If, however, one or more file(s) are provided, the header and trailer lines are not listed. This behavior is also similar to that of Unix's ``ls -l''; it may be overridden by specifying the -h and -t options expli- citly. In such a case the listing format must also be specified explicitly, since -h or -t (or both) in the absence of other options implies that ONLY the header or trailer line (or both) is listed. See the EXAMPLES section below for a semi-intelligible translation of this nonsense. The verbose listing is mostly self-explanatory. It also lists file comments and the zipfile comment, if any, and the type and number of bytes in any stored extra fields. Currently known types of extra fields include PKWARE's authentication (``AV'') info; OS/2 extended attributes; VMS filesystem info, both PKWARE and Info-ZIP versions; Macin- tosh resource forks; Acorn/Archimedes SparkFS info; and so on. (Note that in the case of OS/2 extended attributes-- perhaps the most common use of zipfile extra fields--the size of the stored EAs as reported by zipinfo may not match the number given by OS/2's dir command: OS/2 always reports the number of bytes required in 16-bit format, whereas zipinfo always reports the 32-bit storage.) ENVIRONMENT OPTIONS Modifying zipinfo's default behavior via options placed in an environment variable can be a bit complicated to explain, due to zipinfo's attempts to handle various defaults in an intuitive, yet Unix-like, manner. (Try not to laugh.) Nevertheless, there is some underlying logic. In brief, Info-ZIP Last change: 28 Aug 94 (v2.02) 5 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) there are three ``priority levels'' of options: the default options; environment options, which can override or add to the defaults; and explicit options given by the user, which can override or add to either of the above. The default listing format, as noted above, corresponds roughly to the "zipinfo -hst" command (except when indivi- dual zipfile members are specified). A user who prefers the long-listing format (-l) can make use of the zipinfo's environment variable to change this default: ZIPINFO=-l; export ZIPINFO Unix Bourne shell setenv ZIPINFO -l Unix C shell set ZIPINFO=-l OS/2 or MS-DOS define ZIPINFO_OPTS "-l" VMS (quotes for lowercase) If, in addition, the user dislikes the trailer line, zipinfo's concept of ``negative options'' may be used to override the default inclusion of the line. This is accom- plished by preceding the undesired option with one or more minuses: e.g., ``-l-t'' or ``--tl'', in this example. The first hyphen is the regular switch character, but the one before the `t' is a minus sign. The dual use of hyphens may seem a little awkward, but it's reasonably intuitive nonetheless: simply ignore the first hyphen and go from there. It is also consistent with the behavior of the Unix command nice(1). As suggested above, the default variable names are ZIPINFO_OPTS for VMS (where the symbol used to install zipinfo as a foreign command would otherwise be confused with the environment variable), and ZIPINFO for all other operating systems. For compatibility with zip(1L), ZIPIN- FOOPT is also accepted (don't ask). If both ZIPINFO and ZIPINFOOPT are defined, however, ZIPINFO takes precedence. unzip's diagnostic option (-v with no zipfile name) can be used to check the values of all four possible unzip and zipinfo environment variables. EXAMPLES To get a basic, short-format listing of the complete con- tents of a ZIP archive storage.zip, with both header and totals lines, use only the archive name as an argument to zipinfo: zipinfo storage To produce a basic, long-format listing (not verbose), including header and totals lines, use -l: zipinfo -l storage Info-ZIP Last change: 28 Aug 94 (v2.02) 6 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) To list the complete contents of the archive without header and totals lines, either negate the -h and -t options or else specify the contents explicitly: zipinfo --h-t storage zipinfo storage \* (where the backslash is required only if the shell would otherwise expand the `*' wildcard, as in Unix when globbing is turned on--double quotes around the asterisk would have worked as well). To turn off the totals line by default, use the environment variable (C shell is assumed here): setenv ZIPINFO --t zipinfo storage To get the full, short-format listing of the first example again, given that the environment variable is set as in the previous example, it is necessary to specify the -s option explicitly, since the -t option by itself implies that ONLY the footer line is to be printed: setenv ZIPINFO --t zipinfo -t storage [only totals line] zipinfo -st storage [full listing] The -s option, like -m and -l, includes headers and footers by default, unless otherwise specified. Since the environ- ment variable specified no footers and that has a higher precedence than the default behavior of -s, an explicit -t option was necessary to produce the full listing. Nothing was indicated about the header, however, so the -s option was sufficient. Note that both the -h and -t options, when used by themselves or with each other, override any default listing of member files; only the header and/or footer are printed. This behavior is useful when zipinfo is used with a wildcard zipfile specification; the contents of all zip- files are then summarized with a single command. To list information on a single file within the archive, in medium format, specify the filename explicitly: zipinfo -m storage unshrink.c The specification of any member file, as in this example, will override the default header and totals lines; only the single line of information about the requested file will be printed. This is intuitively what one would expect when requesting information about a single file. For multiple files, it is often useful to know the total compressed and uncompressed size; in such cases -t may be specified expli- citly: Info-ZIP Last change: 28 Aug 94 (v2.02) 7 ZIPINFO(1L) MISC. REFERENCE MANUAL PAGES ZIPINFO(1L) zipinfo -mt storage "*.[ch]" Mak\* To get maximal information about the ZIP archive, use the verbose option. It is usually wise to pipe the output into a filter such as Unix more(1) if the operating system allows it: zipinfo -v storage | more Finally, to see the most recently modified files in the archive, use the -T option in conjunction with an external sorting utility such as Unix sort(1) (and tail(1) as well, in this example): zipinfo -T storage | sort -n +6 | tail -15 The -n option to sort(1) tells it to sort numerically rather than in ASCII order, and the +6 option tells it to sort on the sixth field after the first one (i.e., the seventh field). This assumes the default short-listing format; if -m or -l is used, the proper sort(1) option would be +7. The tail(1) command filters out all but the last 15 lines of the listing. Future releases of zipinfo may incorporate date/time and filename sorting as built-in options. TIPS The author finds it convenient to define an alias ii for zipinfo on systems which allow aliases (or, on other sys- tems, copy/rename the executable, create a link or create a command file with the name ii). The ii usage parallels the common ll alias for long listings in Unix, and the similar- ity between the outputs of the two commands was intentional. BUGS None known at this time, but we're always delighted to find a good one. SEE ALSO ls(1), funzip(1L), unzip(1L), unzipsfx(1L), zip(1L), zipcloak(1L), zipnote(1L), zipsplit(1L) AUTHOR Greg Roelofs (a.k.a. Cave Newt). ZipInfo contains pattern- matching code by Mark Adler and fixes/improvements by many others. Please refer to the CONTRIBS file in the UnZip source distribution for a more complete list. Info-ZIP Last change: 28 Aug 94 (v2.02) 8